催化动力学荧光分析法测定啤酒中的痕量甲醛

在稀硫酸溶液中,甲醛催化溴酸钾氧化吖啶红的反应并使其发生荧光猝灭。据此,建立了新的测定痕量甲醛的催化荧光动力学分析法。方法检出限为0.002 mg/L,线性范围为0.004~0.16 mg/L。本法简便、快速,用于啤酒中痕量甲醛的测定,分析结果满意。     

催化动力学荧光法测定痕量甲醛

在硫酸介质中,甲醛能催化溴酸钾氧化藏红T的反应,使其荧光猝灭,据此建立了催化动力学荧光分析法测定甲醛的新方法。研究了催化反应的性能,优化了方法的实验条件。方法的线性范围为0.025~0.25μg/mL,检出限4.19×10-5μg/mL。该方法简便快速,常见共存物质干扰小,已用于环境水样及家居空气中痕量甲醛的测定,结果满意。     

动力学分光光度法及荧光光度法测定痕量甲醛

在稀硫酸溶液中,研究了甲醛对催化KClO3氧化丁基罗丹明B褪色及荧光猝灭的动力学条件,建立了测定痕量甲醛的动力学光度及荧光光度分析方法,方法线性范围分别为0.02～0.27μg/mL和0.01～2.45μg/mL,检出限分别为1.2×10-8g/mL和3.8×10-9g/mL。该法灵敏度较高,选择性较好,用于湖水、饮料和漆料中痕量甲醛的测定,结果令人满意。     

动力学光度法测定痕量甲醛

在稀硫酸溶液中,痕量甲醛对氯酸钾氧化玫瑰桃红R褪色反应有催化作用，研究了其动力学条件，测定了动力学反应参数，建立了测定痕量甲醛的动力学光度分析新方法，线性范围为0．02—0．5mg／L，检出限为8．0μg/L；灵敏度较高，选择性较好；该法用于新建住宅室内空气及建筑粘合剂中痕量甲醛的测定，结果满意。     

水发食品中痕量甲醛的测定

为建立催化动力学荧光法测定痕量甲醛的新方法,基于在酸性介质中,甲醛催化KBrO3氧化藏红T的褪色反应,使其荧光猝灭的原理,将反应体系在沸水浴中加热8 min,流水冷却3min,采用动力学荧光法测定痕量甲醛。结果表明,甲醛在0.02~0.14μg/mL范围内与△F值呈良好的线性关系,线性方程为△F=-1.642 8+274.12C(μg/mL),r=0.996 9,检出限为0.011μg/mL。该法简便,快速,常见共存物质干扰小,可用于水发食品及其它食品中甲醛含量的测定,加标回收率为84.63%~94.93%。     

催化荧光动力学法测定食品中痕量甲醛

基于在酸性条件中,甲醛催化KBrO3氧化吡口罗红B的褪色反应,使其荧光猝灭,建立了荧光动力学法测定痕量甲醛的新方法。反应在沸水浴中进行8 min,测定甲醛的线性范围为0.016~0.14 mg/L,检出限为8.6×10-6g/L。该方法用于水发食品中甲醛的测定,并进行了加标回收试验,回收率在96.0%~104.2%之间,相对标准偏差为1.7%~3.5%。     

催化光度法测定空气和食品中的甲醛

随着工业的发展，大气和室内环境、食品中的甲醛含量越来越多，它对人体的影响已被人们重视。而目前测定甲醛的方法还不多，利用催化动力学光度法测定痕量甲醛，已有报道。本文研究发现，在磷酸介质中，甲醛能强烈催化溴酸钾氧化食用色素胭脂红的褪色反应，在510nm波长处，其反应速度     

溴酸钾氧化酚藏花红动力学荧光法测定痕量甲醛

在H2SO4介质中,痕量甲醛能显著地催化溴酸钾氧化酚藏花红的反应,使体系的荧光强度减弱,据此建立了动力学荧光法测定甲醛的新方法。在最佳实验条件下,方法的线性范围为8.0～400μg/L,检出限为3.1μg/L。该法简便、快速、选择性好,已用于环境水样中痕量甲醛的测定,其加标回收率在97.5%～103%之间,相对标准偏差为2.9%～3.4%。     

顺序注射催化动力学光度法测定织物和室内空气中痕量甲醛

在磷酸介质中 ,甲醛可以催化溴酸钾氧化　花青的反应使其退色 ,据此建立了顺序注射催化动力学光度法测定织物和室内空气中痕量甲醛的新方法。方法的线性范围 0 .5～ 7.0 μg mL ,检出限 0 .1 μg mL。用于树脂整理特殊织物和室内空气中痕量甲醛的测定 ,回收率在 97.0 %～ 1 0 5 .0 %之间。     

一种利用结晶紫-过氧化氢测定啤酒中痕量甲醛的方法

正公布号:CN105424691A公布日:2016.03.23申请人:运城学院摘要:本发明涉及测定啤酒中痕量甲醛的技术领域,是一种利用结晶紫–过氧化氢测定啤酒中痕量甲醛的方法;该方法利用在硫酸介质中,甲醛能催化过氧化氢氧化结晶紫的褪色反应,其褪色程度与甲醛的含量成正比,从而建立一种测定啤酒中痕量甲醛的新方法;首先将结晶紫溶液、硫酸和过氧     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.