Spot size diagnostics for flash radiographic X-ray sources at LAPA

Spot size is one of the parameters to characterize the performance of a radiographic X-ray source. It determines the degree of blurring due to magnification directly. In recent years, a variety of measurement methods have been used to diagnose X-ray spot size at Laboratory of Accelerator Physics and Application (LAPA). Computer simulations and experiments showed that using a rolled-edge to measure the spot size are more accurate, and the intensity distribution of X-ray source was obtained by a device with a square aperture. Experimental and simulation results on a flash X-ray source at our laboratory are presented and discussed in this paper. In addition, a new method for time resolved diagnostics of X-ray spot size is introduced too.     

Spot size diagnostics for flash radiographic X-ray sources at LAPA

Spot size is one of the parameters to characterize the performance of a radiographic X-ray source. It determines the degree of blurring due to magnification directly. In recent years, a variety of measurement methods have been used to diagnose X-ray spot size at Laboratory of Accelerator Physics and Application (LAPA). Computer simulations and experiments showed that using a rolled-edge to measure the spot size are more accurate, and the intensity distribution of X-ray source was obtained by a device with a square aperture. Experimental and simulation results on a flash X-ray source at our laboratory are presented and discussed in this paper. In addition, a new method for time resolved diagnostics of X-ray spot size is introduced too.     

Experimental study of K-shell X-ray emission generated from nanowire target irradiated by relativistic laser pulses

K-shell X-ray emission from a Cu nanowire target irradiated by an ultraintense femtosecond laser pulse is studied using an elliptically bent quartz crystal and imaging plate. The designed bent crystal spectrometer has better spectral resolution, which is higher than 1 000. The absolute Kα radiation photon yields are obtained from the experimental results and the Monte-Carlo model. The conversion efficiency of the Cu Kα line is estimated to be 0.019% from the interaction of 4 J, 50-fs laser pulse irradiated on a Cu nanowire target. The high yield of K shell X-ray has important applications in X-ray emission source.     

Intense laser beam guiding in self-induced electron cavitation channel in underdense plasmas

In underdense plasmas, the transverse ponderomotive force of an intense laser beam with Gaussian transverse profile expels electrons radially, and it can lead to an electron cavitation. An improved cavitation model with charge conservation constraint is applied to the determination of the width of the electron cavity. The envelope equation for laser spot size derived by using source-dependent expansion method is extended to including the electron cavity. The condition for self-guiding is given and illuminated by an effective potential for the laser spot size. The effects of the laser power, plasma density and energy dissipation on the self-guiding condition are discussed.     

Laser Tracking and Pointing at a Target with Stimulated Brillouin Scattering

Laser tracking and pointing at a simulated moving target in atmosphere 1.27 km away is realized experimentally,in which stimulated Brillouin scattering (SBS) phase conjugation technology and velocity compensation mirror are used. Only if the angle between the SBS phase conjugation laser and the illumination laser is smaller than the atmosphere isoplanatic angle ψo, is the wave-front aberration of laser beam produced by atmospheric turbulence compensated for in real time. This experiment was carried out with horizontal ranges 1.27km at 50m height above the ground, and Nd: YA G lasers are used. By changing the angle of a velocity compensation mirror reflecting the SBS phase conjugation laser to the simulated target, simulated targets with different moving velocities are tracked and pointed by the laser beam. The spot and energy distribution of illumination laser spot and SBS phase conjugation laser are recorded. The energy back to target is up to 75 mJ. The SBS phase conjugation laser spot shows that it is focused at the simulated moving target within a small area.     

Enhancement of the Number of Fast Electrons Generated in a Laser Inverse Cone Interaction

Enhancement of the energy-conversion efficiency from laser to target electrons is demonstrated by two-dimensional particle-in-cell simulations in a laser-inverse cone interaction. When an intense short-pulse laser illuminates the inverse cone target, the electrons at the cone end are accelerated by the ponderomotive force. Then these electrons are guided and confined to transport along the inverse cone walls by the induced electromagnetic fields. A device consisting of inverse hollow-cone and multihole array plasma is proposed in order to increase the energy-conversion efficiency from laser to electrons. Particle-in-cell simulations present that the multiholes transpiercing the cone end help to enhance the number of fast electrons and the maximum electron energy significantly.     

Effects of Confined Laser Ablation on Laser Plasma Propulsion

We investigate the effects of confined laser ablation on laser plasma propulsion. Compared with planar ablation, the cavity ablation provides an effective way to obtain a large target momentum and a high coupling coefficient. When laser pulses are focused into a cavity with 1 mm diameter and 2ram depth, a high coupling coefficient is obtained. By using a glass layer to cover the cavity, the coupling coefficient is enhanced by 10 times. Meanwhile, it is found that with the increase of the target surface size, the target momentum presents a linear increase.     

Nonlinear propagation of an intense Laguerre–Gaussian laser pulse in a plasma channel

The nonlinear propagation of an intense Laguerre–Gaussian(LG) laser pulse in a parabolic preformed plasma channel is analyzed by means of the variational method. The evolution equation of the spot size is derived including the effects of relativistic self-focusing, preformed channel focusing, and ponderomotive self-channeling. The parametric conditions of the LG laser pulse and plasma channel for propagating with constant spot size, periodically focusing and defocusing oscillation,catastrophic focusing, and solitary waves are obtained. Compared with the laser pulse with fundamental Gaussian(FG)mode, it is found that the effect of vacuum diffraction is reduced by half and the effects of relativistic and wakefield focusing are decreased by a quarter due to the hollow transverse intensity profile of the LG laser pulse, while the effect of channel focusing is the same order of magnitude with that of the FG laser pulse. Thus, the matched condition for the intense LG laser pulse with constant spot size is released obviously, while the parameters of the laser and plasma for the existence of solitary waves nearly coincide with those of the FG laser pulse.     

Laser-Induced Particle Jet and Its Ignition Application in Premixed Combustible Gases

A hot particle jet is induced as a laser pulse from a free oscillated Nd：YAG laser focused on a coal target. The particle jet successfully initiates combustion in a premixed combustible gas consisting of hydrogen, oxygen, and air. The experiment reveals that the ionization of the particle jet is enhanced during the laser pulse. This characteristic is attributed to the electron cascade process and the ionization of the particles or molecules of the target. The initial free electrons, which are ablated from the coal target, are accelerated by the laser pulse through the inverse Bremsstrahfung process and then collide with the neutrals in the jet, causing the latter to be ionized.     

Numerical simulation for all-optical Thomson scattering X-ray source

Energy spectra, angular distributions, and temporal profiles of the photons produced by an all-optical Thomson scat- tering X-ray source are explored through numerical simulations based on the parameters of the SILEX-I laser system （800 nm, 30 fs, 300 TW） and the previous wakefield acceleration experimental results. The simulation results show that X-ray pulses with a duration of 30 fs and an emission angle of 50 mrad can be produced from such a source. Using the optimized electron parameters, X-ray pulses with better directivity and narrower energy spectra can be obtained. Besides the electron parameters, the laser parameters such as the wavelength, pulse duration, and spot size also affect the X-ray yield, the angular distribution, and the maximum photon energy, except the X-ray pulse duration which is slightly changed for the case of ultrafast laser-electron interaction.     

Effects of space duty cycle on the characteristics of fiber laser coherent beam combination

<正>The characteristics of fiber laser coherent beam combination are investigated by using a 2×2 fiber laser array with a self-Fourier cavity.The experimental results show that with a certain output width the power ratio of the center spot is increased with the increase of space duty cycle,meanwhile the number of secondary spots is decreased correspondingly.The results are in agreement with theoretic analysis.     

Electron Acceleration and Bunch Generation by Intense Femtosecond Laser Pulse in Preplasma of a Target

We present analytical studies of electron acceleration in the low-density preplasma of a thin solid target by an intense femtosecond laser pulse. Electrons in the preplasma are trapped and accelerated by the ponderomotive force as well as the wake field. Two-dimensional particle-in-cell simulations show that when the laser pulse is stopped by the target, electrons trapped in the laser pules can be extracted and move forward inertially. The energetic electron bunch in the bubble is unaffected by the reflected pulse and passes through the target with small energy spread and emittance. There is an optimal preplasma density for the generation of the monoenergetic electron bunch if a laser pulse is given. The maximum electron energy is inverse proportion to the preplasma density.     

Effect of laser spot size on fusion neutron yield in laser--deuterium cluster interactions

The effect of the laser spot size on the neutron yield of table-top nuclear fusion from explosions of a femtosecond intense laser pulse heated deuterium clusters is investigated by using a simplified model, in which the cluster size distribution and the energy attenuation of the laser as it propagates through the cluster jet are taken into account. It has been found that there exists a proper laser spot size for the maximum fusion neutron yield for a given laser pulse and a specific deuterium gas cluster jet. The proper spot size, which is dependent on the laser parameters and the cluster jet parameters, has been calculated and compared with the available experimental data. A reasonable agreement between the calculated results and the published experimental results is found.     

Numerical simulation of end-pumped CW Nd^3＋：GdVO4 laser at 1063 nm

A theoretical model to simulate an end-pumped CW Nd^3＋：GdVO4 laser at 1063 nm is presented. Its essence is to use the propagation equations to demonstrate the spatial evolutions of the pump and the laser powers in the cavity, hence it is applicable to both low and high gain lasers. The simulation results obtained by this model are in good agreement with the experimental observations reported in the literature for a Ti：sapphlre-pumped Nd^3＋：GdVO4 laser. Moreover, some parameters, such as the reflectivity of output coupler, the spot size of laser beam and the crystal length, are discussed with a view to optimizing the laser performance.     

Laser-produced plasma helium-like titanium Kα x-ray source and its application to Rayleigh-Taylor instability study

Several experiments are performed on the ShenGuang-II laser facility to investigate an x-ray source and test radiography concepts.X-ray lines emitted from laser-produced plasmas are the most practical means of generating these high intensity sources.By using a time-integrated space-resolved keV spectroscope and pinhole camera,potential helium-like titanium Kα x-ray backlighting (radiography) line source is studied as a function of laser wavelength,ratio of pre-pulse intensity to main pulse intensity,and laser intensity (from 7.25 to～11.3×10 15 W/cm 2).One-dimensional radiography using a grid consisting of 5 μm Au wires on 16 μm period and the pinhole-assisted point projection is tested.The measurements show that the size of the helium-like titanium Kα source from a simple foil target is larger than 100 μm,and relative x-ray line emission conversion efficiency ξ x from the incident laser light energy to heliumlike titanium K-shell spectrum increases significantly with pre-pulse intensity increasing,increases rapidly with laser wavelength decreasing,and increases moderately with main laser intensity increasing.It is also found that a gold gird foils can reach an imaging resolution better than 5-μm featured with high contrast.It is further demonstrated that the pinhole-assisted point projection at such a level will be a novel two-dimensional imaging diagnostic technique for inertial confinement fusion experiments.     

Experimental study of conversion from atomic high—order harmonics to x—ray emissions

There are two physical phenomena in a strong laser intensity. One is the high-order harmonic emission; the other is x-ray emission from optical-field ionized plasmas. The experiment of conversion from high-order harmonics to x-ray emissions was given with a 105fs Ti:sapphire laser by adjusting laser intensities. The ingredient in plasma was investigated by the numerical simulations.Our experimental results suggested that the free electrons have detrimental effects on harmonic generation but are favourable for x-ray emission from optical-field ionized plasmas. If we want to obtain more intense harmonic signals as a coherent light source in the soft x-ray region, we must avoid the production of free electrons in plasmas. At the same time, if we want to observe x-rays for the development of high-repetition-rate table-top soft x-ray lasers, we should strip all atoms in the plasmas to a necessary ionized stage by the optical-field-ionization in the field of a high-intensity laser pulse.     

Electron Acceleration in the Bubble Regime with Dense-Plasma Wall Driven by an Ultraintense Laser Pulse

An optimizing scheme for electron acceleration in the wake bubble with dense-plasma wall driven by an ultraintense laser pulse is presented and investigated by particle-in-cell simulation. The wall has an inner diameter matching the expected lateral bubble size. The bubble shape can be transversely controlled and longitudinally shrunk. The accelerated electrons as a bunch have a high quality because the electrons almost stay close to the bottom of the bubble and are accelerated to much high energy with narrow energy spread.     

GISAXS and SAXS studies on the spatial structures of Co nanowire arrays

The spatial structures of magnetic Co nanowire array embedded in anodic aluminium membranes were investigated by grazing incidence small angle X-ray scattering (GISAXS) and conventional small angle X-ray scattering (SAXS) techniques. Compared with SEM observation, the GISAXS and SAXS measurements can get more overall structural information in a large-area scale. In this study, the two-dimensional GISAXS pattern was well reconstructed by using the IsGISAXS program. The results demonstrate that the hexagonal lattice formed by the Co nanowires is distorted (a ≈ 105 nm, b ≈ 95 nm). These Co nanowires are isolated into many structure domains with different orientations with a size of about 2 μm. The SAXS results have also confirmed that the nanopore structures in the AAM can be retained after depositing Co nanowires although the Co nanowires can not completely but only just fill up the nanopores. These results are helpful for understanding the global structure of the Co nanowire array.     

Ultrasonic focusing and scanning with multiple waves

This paper presents a new focusing and scanning method which focuses multiple waves on a target. The key of the method is to control excitation pulses for each element of the transducer array. The excitation pulse on each array element is obtained by time reversing the signal received by the same element, which is generated by an imaginary source at the target. The excitation pulses from all array elements are transmitted and arrive at the target simultaneously, and focusing is achieved. The performance of the two methods is compared in numerical examples, and it is demonstrated that the proposed method achieves a satisfactory focusing and a good signal-to-noise ratio no matter where the target location is.     

Speckle intensity images of target based on Monte Carlo method

Speckle intensity in the detector plane is deduced in the free-space optical system and imaging system based on Van Cittert-Zemike theorem. The speckle intensity images of plane target and conical target are obtained by using the Monte Carlo method and measured experimentally. The results show that when the range extent of target is smaller, the speckle size along the same direction become longer, and the speckle size increase with increasing incident light wavelengths. The speckle size increases and the speckle intensity images of target is closer to the actual object when the aperture scale augments. These findings are useful to access the target information by speckle in laser radar systems.