Layer-by-layer electrosynthesis of Pt–Polyaniline nanocomposites for the catalytic oxidation of methanol

A new composite material based on the electrochemical generation of a layer-by-layer structure of polyaniline (PANI) and Pt particles has been prepared. The number of layers and the nature of the external layer (PANI or Pt) determine the electrocatalytic performance of the composite for the oxidation of methanol. We demonstrate that the layer-by-layer approach to form the nanocomposite and modification of the Pt particles with a layer of PANI leads to substantially higher catalytic efficiency.     

Platinum nanoparticles supported on zirconia–carbon black nanocomposites for methanol oxidation reaction

Platinum (Pt) nanoparticles supported on zirconia–carbon black nanocomposites (Zr–C), which annealed at different temperatures, used as Pt/Zr–C electrocatalysts for methanol oxidation reaction (MOR) are prepared and characterized in this study. Transmission electron microscope images and X-ray diffraction analysis showed that the diameters of Pt nanoparticles are around 3–4 nm. Electrocatalytic MOR performances of these Pt/Zr–C electrocatalysts are investigated by cyclic voltammetry, CO-stripping voltammetry, and chronoamperometry. All the Pt/Zr–C electrocatalysts synthesized in this study exhibited higher MOR efficiency than that of the commercial E-TEK Pt/C electrocatalyst, and the electrocatalyst using Zr–C support annealed at 300 °C, achieving the highest MOR efficiency among all the electrocatalysts.     

Bimetallic Cu–Pt/nanoporous carbon composite as an efficient catalyst for methanol oxidation

A novel bimetallic Cu–Pt nanoparticle supported onto Cu/indirectly carbonized nanoporous carbon composite (Cu–Pt/ICNPCC) was prepared through a two-step process: first, carbonization of furfuryl alcohol-infiltrated MOF-199 [metal–organic framework Cu₃(BTC)₂ (BTC?=?1,3,5-benzene tricarboxylate)], without removing the Cu metal with HF aqueous solution; second, the partial galvanic replacement reaction (GRR) of Cu nanoparticles by Pt^IV upon immersion in a platinum(IV) chloride solution. The synthesized materials characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDS), and electrochemical methods. The EDS result revealed that part of Cu nanoparticles have been substituted by Pt nanoparticles after GRR. The methanol oxidation at the surface of Cu–Pt/ICNPCC was investigated by cyclic voltammetry method in 0.5 M H₂SO₄ and indicated good electro-catalytic activity towards methanol oxidation (E_p?=?0.85 V vs. NHE and j_f?=?1.00 mA cm^?2). It is suggested that this improvement is attributed to the effect of proper Cu/ICNPCC for fine dispersion, efficient adhesion, and prevention of Pt coalescing.     

Platinum–polytyramine composite material with improved performances for methanol oxidation

Polytyramine (PTy) is shown to be a possible alternative to other conducting polymers as a support material for fuel cell electrocatalysts such as platinum. In this work, a Pt–PTy composite was prepared via potentiodynamic deposition of polytyramine on graphite substrate, followed by the electrochemical deposition of Pt nanoparticles. The material obtained by this straightforward method exhibited, for platinum loadings as low as ca. 0.12 mg cm⁻², a specific electrochemically active surface area of the electrocatalyst of ca. 54 m² g⁻¹, together with a good electrocatalytic activity for methanol oxidation in acidic media, thus ensuring better efficiency of Pt utilization. The system Pt–PTy appears to be worthy of development for methanol fuel cell applications also because the results suggested that, when deposited as small particles in a PTy matrix, platinum is less sensitive to fouling during CH₃OH oxidation.     

Preparation and electrochemical performance of graphene–Pt black nanocomposite for electrochemical methanol oxidation

This work reports the preparation, characterization, and electrocatalytic characteristics of a new metallic nanocatalyst. The catalyst, Pt black–graphene oxide (Pt-GO), was prepared by deposition of Pt black on the surface of graphene oxide nanosheet and characterized by transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), and voltammetry. The Pt-graphene (Pt-GR) composite modified glassy carbon electrode (Pt-GR/GCE) was prepared with cyclic voltammetric scanning of Pt-GO/GCE in the potential range from ?1.5 to 0.2 in 0.1 M phosphate buffer solution at 50 mV·s^?1 for 5 cycles. The electrocatalytic properties of the Pt-GR/GCE for methanol (CH₃OH) oxidation have been investigated by cyclic voltammetry (CV); high electrocatalytic activity of the Pt-GR/GCE can be observed. This may be attributed to the high dispersion of Pt catalyst and the particular properties of GR support. The long-term stability of Pt-GR composite was investigated in 0.05 M CH₃OH in 0.1 M H₂SO₄ solution. It can be observed that the peak current decreases gradually with the successive scans. The loss may result from the consumption of methanol during the CV scan. It also may be due to the poisoning organic compounds. The results imply that the Pt-GR composite has good potential applications in fuel cells.     

A facile chemical reduction method for synthesis of platinum–iron catalysts on carbon fiber papers for methanol oxidation

To enhance catalytic activity and durability for methanol oxidation reaction (MOR), we have fabricated bimetallic Pt–Fe catalysts on carbon fiber papers (denoted as Pt–Fe@CFP) by a facile chemical reduction method using iron as the precursor, ascorbic acid and sodium hypophosphite as the reductants, respectively. When ascorbic acid is using as the reductant, the Pt–Fe@CFP catalysts are composed of platinum and disordered Pt–Fe phases. The atomic ratio between Pt and Fe can be adjusted by altering deposition conditions. The Pt–Fe@CFP catalysts with Pt/Fe ratio of 1.1, which deposited with surfactant CTAB in bath at room temperature, exhibit excellent catalytic activity and stability in MOR. However, when sodium hypophosphite is employed as the reductant, the co-deposition of phosphorus would lead to a decreased catalytic performance in MOR.     

Pt–Ni carbon-supported catalysts for methanol oxidation prepared by Ni electroless deposition and its galvanic replacement by Pt

Pt–Ni particles supported on Vulcan XC72R carbon powder have been prepared by a combination of crystalline Ni electroless deposition and its subsequent partial galvanic replacement by Pt upon treatment of the Ni/C precursor by a solution of chloroplatinate ions. The Pt-to-Ni atomic ratio of the prepared catalyst has been confirmed by EDS analysis to be ca. 1.5:1. No shift of Pt XPS peaks has been observed, indicating no significant modification of its electronic properties, whereas the small shift of the corresponding X-ray diffraction (XRD) peaks indicates the formation of a Pt-rich alloy. No Ni XRD peaks have been observed in the XRD pattern, suggesting the existence of very small pockets of Ni in the core of the particles. The surface electrochemistry of electrodes prepared from the catalyst material suggests the existence of a Pt shell. A moderate increase in intrinsic catalytic activity towards methanol oxidation in acid has been observed with respect to a commercial Pt catalyst, but significant mass specific activity has been recorded as a result of Pt preferential confinement to the outer layers of the catalyst nanoparticles.     

Pt–Ni alloy nanoparticles supported on multiwalled carbon nanotubes for methanol oxidation in alkaline media

The Pt–Ni alloy nanoparticles with different Pt/Ni atomic ratios supported on functionalized multiwalled carbon nanotubes surface were synthesized via an impregnation-reduction method. The nanocatalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical techniques. XRD demonstrated that Pt was alloyed with Ni. TEM showed that the Pt–Ni alloy nanoparticles were uniformly dispersed on the multiwalled carbon nanotubes (MWCNTs) surface, indicating appropriate amount of Ni in Pt–Ni alloy which facilitates the dispersion of nanoparticles on the MWCNT surface. XPS revealed that the Pt 4f peak in Pt–Ni/MWCNT (4:1) catalyst shifted to a lower binding energy compared with Pt/MWCNT catalyst, and nickel oxides/hydroxides such as NiO, Ni(OH)₂, and NiOOH were on the surface of Pt–Ni nanoparticles. Electrochemical data based on cyclic voltammetry and chronoamperometric curves indicated that Pt–Ni (4:1) alloy nanoparticles exhibited distinctly higher activity and better stability than those of Pt/MWCNTs toward methanol oxidation in alkaline media.     

Sonochemical synthesis of graphene oxide supported Pt–Pd alloy nanocrystals as efficient electrocatalysts for methanol oxidation

Pt–Pd bimetallic nanoparticles supported on graphene oxide (GO) nanosheets were prepared by a sonochemical reduction method in the presence of polyethylene glycol as a stabilizing agent. The synthetic method allowed for a fine tuning of the particle composition without significant changes in their size and degree of aggregation. Detailed characterization of GO-supported Pt–Pd catalysts was carried out by transmission electron microscopy (TEM), AFM, XPS, and electrochemical techniques. Uniform deposition of Pt–Pd nanoparticles with an average diameter of 3 nm was achieved on graphene nanosheets using a novel dual-frequency sonication approach. GO-supported bimetallic catalyst showed significant electrocatalytic activity for methanol oxidation. The influence of different molar compositions of Pt and Pd (1:1, 2:1, and 3:1) on the methanol oxidation efficiency was also evaluated. Among the different Pt/Pd ratios, the 1:1 ratio material showed the lowest onset potential and generated the highest peak current density. The effect of catalyst loading on carbon paper (working electrode) was also studied. Increasing the catalyst loading beyond a certain amount lowered the catalytic activity due to the aggregation of metal particle-loaded GO nanosheets.     

Carbon nanotube–polyurethane shape memory nanocomposites with low trigger temperature

Ester-based polyurethane (PU) with low glass transition temperature was used to develop shape memory nanocomposites with low trigger temperature. Pristine carbon nanotubes (CNTs) and oxidized CNTs (ox-CNTs) were introduced by melt mixing to improve the mechanical and shape memory properties of the PU matrix. The dispersion of CNTs on the mechanical properties and shape memory behaviors of the nanocomposites were also investigated. The results show that better dispersion of ox-CNTs contributes to more stiffness effect below glass transition temperature (T_g) while lower storage modulus (E′) above T_g. The nanocomposites exhibit high shape fixity and recovery ratio above 98%. The ox-CNT/PU nanocomposite shows higher shape recovery ratio for the first cycle, faster recovery due to better dispersion of CNTs and have potential applications for controlling tags or proof marks in the area of frozen food. The trigger temperature can be tailored by controlling the T_g of the PU matrix or the content of the nanofillers.     

Investigation of the Pt–Ni–Pb/C ternary alloy catalysts for methanol electrooxidation

This research is aimed to increase the activity of anodic catalysts and thus to lower noble metal loading in anodes for methanol electrooxidation. The Pt–Ni–Pb/C catalysts with different molar compositions were prepared. Their performance were tested by using a glassy carbon disk electrode through cyclic voltammetric curves in a solution of 0.5 mol L⁻¹ CH₃OH and 0.5 mol L⁻¹ H₂SO₄. The performances of Pt–Ni–Pb/C catalyst with optimum composition (the molar ratio of Pt/Ni/Pb is 5:4:1) and Pt/C (E-Tek) were also compared. Their particle sizes and structures were determined by means of X-ray diffraction (XRD). The XRD results show, compared with that of Pt/C, the lattice parameter of Pt–Ni–Pb (5:4:1)/C catalyst decreases, its diffraction peaks are shifted slightly to a higher 2θ values. This indicates the formation of an alloy involving the incorporation of Ni and Pb atoms into the fcc structure of Pt. The electrochemical measurement shows the activity of Pt–Ni–Pb/C catalyst with an atomic ratio of 5:4:1 for methanol electrooxidation is the best among all different compositions. The activity of Pt–Ni–Pb (5:4:1)/C catalyst is much higher than that of Pt/C (E-Tek).     

Combinatorial screening of ternary Pt–Ni–Cr catalysts for methanol electro-oxidation

Methanol electro-oxidation activity of ternary Pt–Ni–Cr system was studied by using a combinatorial screening method. A Pt–Ni–Cr thin-film library was prepared by sputtering and quickly characterized by a multichannel multielectrode analyzer. Among the 63 different composition thin-film catalysts, Pt₂₈Ni₃₆Cr₃₆ showed the highest methanol electro-oxidation activity and good stability. This new composition was also studied in its powder form by synthesizing and characterizing Pt₂₈Ni₃₆Cr₃₆/C catalyst. In chronoamperometry testing, the Pt₂₈Ni₃₆Cr₃₆/C catalyst exhibited “decay-free” behavior during 600 s operation by keeping its current density up to 97.1% of its peak current density, while the current densities of Pt/C and Pt₅₀Ru₅₀/C catalysts decreased to 14.0% and 60.3% of their peak current densities, respectively. At 600 s operation, current density of the Pt₂₈Ni₃₆Cr₃₆/C catalyst was 23.8 A g_{noble metal}⁻¹, while that of those of the Pt/C and Pt₅₀Ru₅₀/C catalysts were 2.74 and 18.8 A g_{noble metal}⁻¹, respectively.     

An EQCN assessment of electrocatalytic oxidation of methanol at nanostructured Au–Pt alloy nanoparticles

Alloy nanocrystals encapsulated with alkyl dithiolates (“core-shell” nanoparticles) serve as an intriguing class of nanostructured catalysts. This paper reports the preliminary results of an electrochemical quartz-crystal nanobalance (EQCN) investigation of mass transport associated with the catalytic activation and methanol oxidation at nanostructured Au–Pt nanocrystals. It is demonstrated that the catalytic activation and oxidation of methanol are accompanied by mass fluxes across the nanostructured film. The mass transport involves oxidation–reduction of surface oxygenated species, methanol adsorption and oxidation, solvent breath and product release. The implication of the EQCN results to the understanding of the core-shell nanostructured catalytic mechanism is discussed.     

Pd/Pt core–shell nanowire arrays as highly effective electrocatalysts for methanol electrooxidation in direct methanol fuel cells

Highly ordered Pd/Pt–core–shell nanowire arrays (Pd/Pt NWAs) have been prepared by anodized aluminum oxide (AAO) template-electrodeposition and magnetron sputtering methods. Pd/Pt NWA electrode shows a very high electrochemical active surface area and high electrocatalytic activity for the methanol electrooxidation in acid medium for direct methanol fuel cells (DMFCs). The mass specific anodic peak current density is 756.7 mA mg⁻¹ Pt for the methanol oxidation on the Pd/Pt NWA electrode, an increase by a factor of four as compared to conventional E-TEK PtRu/C electrocatalysts. The mechanism of the significant enhancement of the Pd/Pt core/shell NWA nanostructure in the efficiency and electrocatalytic activity of Pt for the methanol electrooxidation in acid medium is discussed.     

Silica aerogel–iron oxide nanocomposites: recoverable catalysts for the oxidation of alcohols with hydrogen peroxide

Various aerogels of silica gel doped with Fe₂O₃ were prepared by sol–gel method. They were calcined to produce nanoparticle solids. The nanosized mixed oxides were active in the oxidation of alcohols and produced carbonyl compounds in very good to excellent yields using hydrogen peroxide.     

Investigation of unsupported Pt–Ru catalysts for high temperature methanol electro-oxidation

Two unsupported Pt–Ru catalysts, varying in the nature and content of RuOx species, were investigated for methanol electro-oxidation in a solid polymer electrolyte fuel cell at high temperature. The catalyst containing a lower amount of ruthenium oxide showed higher catalytic activity and lower mass transport limitations. A physicochemical investigation was carried out to support the interpretation of electrochemical results. Pt–Ru alloy appears more active than Pt–RuOx in the chemisorption of labile-bonded oxygenated species, which promote the oxidation of the methanolic residues adsorbed on the catalyst surface.     

Co@Pt–Ru core-shell nanoparticles supported on multiwalled carbon nanotube for methanol oxidation

A novel synthesis route concerning reduction of cobalt core onto the surface of multiwalled carbon nanotubes (MWCNTs) and then substitution of part of Co core with Pt–Ru precursor was developed to synthesize the core-shell Co@Pt–Ru/MWCNTs catalyst. In this synthesis route, sodium borohydride and hydrazine hydrate were employed to reduce cobalt step by step in order to control the size of cobalt and the growth speed of cobalt crystal. The novel core-shell Co@Pt–Ru/MWCNTs catalyst shows good electrocatalysis towards methanol oxidation.     

Structure and properties of Pd–Mn hexaaluminate catalysts modified with platinum for the high-temperature oxidation of methane

The effect of Pt additives on the catalytic characteristics of a Pd-containing catalyst based on manganese hexaaluminate was studied. It was found that the bimetallic PtPd-containing catalysts based on MnLaAl₁₁O₁₉ with the Pt/Pd atomic ratio smaller than 0.25 exhibited a comparable or somewhat smaller activity in the methane oxidation, but their stability at elevated temperatures and gas flow rates was higher than that of the Pd-based catalyst. The state of the active constituent of the resulting catalysts was investigated. Main correlations between the state of the active component and the catalytic activity were revealed.     

Electrochemical deposition of platinum nanoparticles in multiwalled carbon nanotube–Nafion composite for methanol electrooxidation

Platinum nanoparticles were successfully deposited within a multiwalled carbon nanotube (MWCNT)–Nafion matrix by a cyclic voltammetry method. A Pt(IV) complex was reduced to platinum nanoparticles on the surface of MWCNTs. The resulting Pt nanoparticles were characterized by scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The Pt–MWCNT–Nafion nanocomposite film-modified glassy carbon electrode had a sharp hydrogen desorption peak at about −0.2 V vs. Ag/AgCl (3 M) in a solution of 0.5 M H₂SO₄, which is directly related to the electrochemical activity of the Pt nanoparticles presented on the surface of MWCNTs. The electrocatalytic properties of the Pt–MWCNT–Nafion nanocomposite-modified glassy carbon electrode for methanol electrooxidation were investigated by cyclic voltammetry in a 2 M CH₃OH + 1 M H₂SO₄ solution. In comparison with the Pt-coated glassy carbon electrode and the Pt–Nafion modified glassy carbon electrode, the Pt–MWCNT–Nafion-modified electrode had excellent electrocatalytic activity toward methanol electrooxidation. The stability of the Pt–MWCNT–Nafion nanocomposite-modified electrode had also been evaluated.     

Electrocatalytic performance of poly(o-phenylenediamine)-Pt–Ru nanocomposite for methanol oxidation

The electrocatalytic properties of poly(o-phenylenediamine) (PoPD)-Pt–Ru nanocomposite electrode for methanol oxidation have been investigated by linear sweep and cyclic voltammetry. The Pt–Ru ion concentration ratio in the electrodeposition bath is varied in the ratios of 1:0.25, 1:0.5, 1:1, 1:2, and 1:4. The morphology and particle size of the nanocomposites are obtained from the scanning electron microscopy data. The onset potential for the oxidation of methanol is found to be effectively reduced by 220 mV for the (PoPD)-Pt–Ru (1:1) nanocomposite compared to PoPD-Pt electrode. Also, the PoPD-Pt–Ru (1:1) composite shows a value of 4.2 for the ratio of forward to reverse peak current which is relatively a high value that can be observed among the conducting polymer-based catalysts used for methanol oxidation. The results are substantiated by the polarization and stability data.