Cobalt–Manganese Mixed‐Sulfide Nanocages Encapsulated by Reduced Graphene Oxide: In Situ Sacrificial Template Synthesis and Superior Lithium Storage Properties

This work demonstrates a facile in situ synthesis of cobalt–manganese mixed sulfide (CoMn‐S) nanocages on reduced graphene oxide (RGO) sheets by using a crystalline Co–Mn precursor as the sacrificial template. The CoMn‐S/RGO hybrid was applied as the anode for Li‐ion storage and exhibited superior specific capacity, excellent cycling performance, and great rate capability. In particular, lithium storage testing revealed that the hybrid delivered high discharge–charge capacities of 670 mA h g⁻¹ at 1.0 A g⁻¹ after 400 cycles and 925 mA h g⁻¹ at 0.1 A g⁻¹ after 300 cycles. The outstanding electrochemical performance of CoMn‐S/RGO is attributed to the close entanglement of nanocages with RGO nanosheets achieved by the synthetic method, which greatly improves ion/electron transport along the interfaces and efficiently mitigates volume dilation during lithium reactions. This rational design of both the composition and architecture of mixed metal sulfides can be expanded to other composite systems for high‐capacity Li‐ion batteries and provides a unique insight into the development of advanced hybrid electrode materials.     

Two-Dimensional Layered Metallic VSe2/SWCNTs/rGO Based Ternary Hybrid Materials for High Performance Energy Storage Applications

In this work, the ternary hybrid structure VSe₂/SWCNTs/rGO is reported for supercapacitor applications. The ternary composite exhibits a high specific capacitance of 450 F g⁻¹ in a symmetric cell configuration, with maximum energy density of 131.4 Wh kg⁻¹ and power density of 27.49 kW kg⁻¹. The ternary hybrid also shows a cyclic stability of 91 % after 5000 cycles. Extensive density functional theory (DFT) simulations on the structure as well as on the electronic properties of the binary hybrid structure VSe₂/SWCNTs and the ternary hybrid structure VSe₂/SWCNTs/rGO have been carried out. Due to a synergic effect, there are enhanced density of states near the Fermi level and higher quantum capacitance for the hybrid ternary structure compared to VSe₂/SWCNTs, leading to higher energy and power density for VSe₂/SWCNTs/rGO, supporting our experimental observation. Computed diffusion energy barrier of electrolyte ions (K⁺) predicts that ions move faster in the ternary structure, providing higher charge storage performance.     

Fabrication of a Hierarchical Ni(OH)2@Ni3S2/Ni Foam Electrode from a Prussian Blue Analogue-Based Composite with Enhanced Electrochemical Capacitive and Electrocatalytic Properties

Developing high-efficiency, cost-effective, and durable electrodes is significant for electrochemical capacitors and electrocatalysis. Herein, a 3D bifunctional electrode consisting of nickel hydroxide nanosheets@nickel sulfide nanocubes arrays on Ni foam (Ni(OH)₂@Ni₃S₂/NF) obtained from a Prussian blue analogue-based precursor is reported. The 3D higher-order porous structure and synergistic effect of different compositions endow the electrode with large specific surface area, facile ion/electron transport path, and improved conductivity. As a result, the Ni(OH)₂@Ni₃S₂/NF electrode exhibits a high specific capacity of 211 mA h g⁻¹ at a current density of 1 A g⁻¹ and 73 % capacity retention after 5000 cycles at 5 A g⁻¹. Moreover, the Ni(OH)₂@Ni₃S₂/NF electrode has superior electrocatalytic activity for the hydrogen evolution reaction with low overpotentials of 140 and 210 mV at current densities of 10 and 100 mA cm⁻², respectively. The synthetic strategy for the unique higher-order porous structure can be extended to fabricate other composite materials for energy storage and conversion.     

Catalytically Active CoSe2 Supported on Nitrogen-Doped Three Dimensional Porous Carbon as a Cathode for Highly Stable Lithium-Sulfur Battery

Lithium-sulfur batteries are promising secondary energy storage devices that are mainly limited by its unsatisfactory cyclability owing to inefficient reversible conversion of sulfur and lithium sulfide on the cathode during the discharge/charging process. In this study, nitrogen-doped three-dimensional porous carbon material loaded with CoSe₂ nanoparticles (CoSe₂-PNC) is developed as a cathode for lithium-sulfur battery. A combination of CoSe₂ and nitrogen-doped porous carbon can efficiently improve the cathode activity and its conductivity, resulting in enhanced redox kinetics of the charge/discharge process. The obtained electrode exhibits a high discharge specific capacity of 1139.6 mAh g⁻¹ at a current density of 0.2 C. After 100 cycles, its capacity remained at 865.7 mAh g⁻¹ thus corresponding to a capacity retention of 75.97 %. In a long-term cycling test, discharge specific capacity of 546.7 mAh g⁻¹ was observed after 300 cycles performed at a current density of 1 C.     

Flower-like NiCo-carbonate Hydroxides for High-performance Solid-state Hybrid Supercapacitor

Compared to the traditional transition metal layered double hydroxides, transition metal layered carbonate double hydroxides (TMC-LDHs) possess superior electrochemical performance in theory. But TMC-LDHs have not received its deserved attention, especially for application in the energy storage field. In this work, a flower-like TMC-LDH (Ni_0.75Co_0.25(CO₃)_0.125(OH)₂, NCCO) material was successfully prepared by hydrothermal method, which exhibits a high specific capacity of 306.8 mAh g⁻¹ (0.52 mAh cm⁻²) at 0.5 A g⁻¹ with capacity retention of 70.5 % after 2000 cycles. The solid-state hybrid supercapacitor device NCCO//PVA/KOH//IHPC based on the prepared NCCO material and an interconnected hierarchical porous carbon (IHPC) delivers a high specific energy of 50.96 Wh kg⁻¹ at a specific power of 1.06 kW kg⁻¹, and a high specific energy of 36.39 Wh kg⁻¹ still can be delivered at a high specific power of 10.49 kW kg⁻¹. More than 181.2 % of initial specific capacity is retained after 12000 cycles. The specific energy, energy retention under large specific power, and the cycle stability of the assembled device are better than most of the solid-state hybrid supercapacitors that have been reported. These results demonstrate the promising prospect of the TMC-LDH material in the practical application in advanced solid-state supercapacitors.     

Hierarchical FeCo2S4@FeNi2S4 Core/Shell Nanostructures on Ni Foam for High-Performance Supercapacitors

The design of electrode materials with rational core/shell structures is promising for improving the electrochemical properties of supercapacitors. Hence, hierarchical FeCo₂S₄@FeNi₂S₄ core/shell nanostructures on Ni foam were fabricated by a simple hydrothermal method. Owing to their structure and synergistic effect, they deliver an excellent specific capacitance of 2393 F g⁻¹ at 1 A g⁻¹ and long cycle lifespan as positive electrode materials. An asymmetric supercapacitor device with FeCo₂S₄@FeNi₂S₄ as positive electrode and graphene as negative electrode exhibited a specific capacitance of 133.2 F g⁻¹ at 1 A g⁻¹ and a high energy density of 47.37 W h kg⁻¹ at a power density of 800 W kg⁻¹. Moreover, the device showed remarkable cycling stability with 87.0 % specific-capacitance retention after 5000 cycles at 2 A g⁻¹. These results demonstrate that the hierarchical FeCo₂S₄@FeNi₂S₄ core/shell structures have great potential in the field of electrochemical energy storage.     

Tube-covering-tube nanostructured polyaniline/carbon nanotube array composite electrode with high capacitance and superior rate performance as well as good cycling stability

The combination of a vertically aligned carbon nanotube array (CNTA) framework and electrodeposition technique leads to a tube-covering-tube nanostructured polyaniline (PANI)/CNTA composite electrode with hierarchical porous structure, large surface area, and superior conductivity. PANI/CNTA composite electrode has high specific capacitance (1030 F g⁻¹), superior rate capability (95% capacity retention at 118 A g⁻¹), and high stability (5.5% capacity loss after 5000 cycles). Energy storage characteristics of the PANI/CNTA composite are presented in this paper.     

Scalable Synthesis of One-Dimensional Mesoporous ZnMnO3 Nanorods with Ultra-Stable and High Rate Capability for Efficient Lithium Storage

The cost-efficient ZnMnO₃ has attracted increasing attention as a prospective anode candidate for advanced lithium-ion batteries (LIBs) owing to its resourceful abundance, large lithium storage capacity and low operating voltage. However, its practical application is still seriously limited by the modest cycling and rate performances. Herein, a facile design to scalable synthesize unique one-dimensional (1D) mesoporous ZnMnO₃ nanorods (ZMO-NRs) composed of nanoscale particles (≈11 nm) is reported. The 1D mesoporous structure and nanoscale building blocks of the ZMO-NRs effectively promote the transport of ions/electrons, accommodate severe volume changes, and expose more active sites for lithium storage. Benefiting from these appealing structural merits, the obtained ZMO-NRs anode exhibits excellent rate behavior (≈454 mAh g⁻¹ at 2 A g⁻¹) and ultra-long term cyclic performance (≈949.7 mAh g⁻¹ even over 500 cycles at 0.5 A g⁻¹) for efficient lithium storage. Additionally, the LiNi_0.8Co_0.1Mn_0.1O₂//ZMO-NRs full cell presents a practical energy density (≈192.2 Wh kg⁻¹) and impressive cyclability with approximately 91 % capacity retention over 110 cycles. This highlights that the ZMO-NRs product is a highly promising high-rate and stable electrode candidate towards advanced LIBs in electronic devices and sustainable energy storage applications.     

Rational Design of Porous Structured Nickel Manganese Sulfides Hexagonal Sheets-in-Cage Structures as an Advanced Electrode Material for High-Performance Electrochemical Capacitors

The design of hierarchical electrodes comprising multiple components with a high electrical conductivity and a large specific surface area has been recognized as a feasible strategy to remarkably boost pseudocapacitors. Herein, we delineate hexagonal sheets-in-cage shaped nickel–manganese sulfides (Ni-Mn-S) with nanosized open spaces for supercapacitor applications to realize faster redox reactions and a lower charge-transfer resistance with a markedly enhanced specific capacitance. The hybrid was facilely prepared through a two-step hydrothermal method. Benefiting from the synergistic effect between Ni and Mn active sites with the improvement of both ionic and electric conductivity, the resulting Ni-Mn-S hybrid displays a high specific capacitance of 1664 F g⁻¹ at a current density of 1 A g⁻¹ and a capacitance of 785 F g⁻¹ is maintained at a current density of 50 A g⁻¹, revealing an outstanding capacity and rate performance. The asymmetric supercapacitor device assembled with the Ni-Mn-S hexagonal sheets-in-cage as the positive electrode delivers a maximum energy density of 40.4 Wh kg⁻¹ at a power density of 750 W kg⁻¹. Impressively, the cycling retention of the as-fabricated device after 10 000 cycles at a current density of 10 A g⁻¹ reaches 85.5 %. Thus, this hybrid with superior capacitive performance holds great potential as an effective charge-storage material.     

Fabrication of Cobaltosic Oxide Nanoparticle-Doped 3 D MXene/Graphene Hybrid Porous Aerogels for All-Solid-State Supercapacitors

MXenes are a new family of 2 D transition metal carbides and nitrides, which have attracted enormous attention in electrochemical energy storage, sensing technology, and catalysis owing to their good conductivity, high specific surface area, and excellent electrochemical properties. In this work, a series of Co₃O₄-doped 3 D MXene/RGO hybrid porous aerogels is designed and prepared through a facile in situ reduction and thermal annealing process, in which the reduced graphene oxide (RGO) conductive network can electrically link the separated Co₃O₄-MXene composite nanosheets, leading to enhanced electronic conductivity. It is found that upon using the Co₃O₄-MXene/RGO hybrid porous aerogel prepared with a mass ratio of Co₃O₄-MXene/RGO of 3:1 (CMR31) as an electrode for a supercapacitor, a superior specific capacitance of 345 F g⁻¹ at the current density of 1 A g⁻¹ is achieved, which is significantly higher than those of Ti₃C₂T_x MXene, RGO, and MXene/RGO electrodes. In addition, a high capacitance retention (85 % of the initial capacitance after 10 000 cycles at a high current density of 3 A g⁻¹) and a low internal resistance R_s (0.44 Ω) can be achieved. An all-solid-state asymmetric supercapacitor (ASC) device is assembled using CMR31, and it has the ability to light up a blue LED indicator for 5 min if four ASCs are connected in series. Therefore, these novel Co₃O₄-MXene/RGO hybrid porous aerogels have potential practical applications in high-energy storage devices.     

MnO2 Nanosheets Grown on Nitrogen‐Doped Hollow Carbon Shells as a High‐Performance Electrode for Asymmetric Supercapacitors

A hierarchical hollow hybrid composite, namely, MnO₂ nanosheets grown on nitrogen‐doped hollow carbon shells (NHCSs@MnO₂), was synthesized by a facile in situ growth process followed by calcination. The composite has a high surface area (251 m²g^?1) and mesopores (4.5 nm in diameter), which can efficiently facilitate transport during electrochemical cycling. Owing to the synergistic effect of NHCSs and MnO₂, the composite shows a high specific capacitance of 306 F g^?1, good rate capability, and an excellent cycling stability of 95.2 % after 5000 cycles at a high current density of 8 A g^?1. More importantly, an asymmetric supercapacitor (ASC) assembled by using NHCSs@MnO₂ and activated carbon as the positive and negative electrodes exhibits high specific capacitance (105.5 F g^?1 at 0.5 A g^?1 and 78.5 F g^?1 at 10 A g^?1) with excellent rate capability, achieves a maximum energy density of 43.9 Wh kg^?1 at a power density of 408 W kg^?1, and has high stability, whereby the ASC retains 81.4 % of its initial capacitance at a current density of 5 A g^?1 after 4000 cycles. Therefore, the NHCSs@MnO₂ electrode material is a promising candidate for future energy‐storage systems.     

Copper sulfide nanoneedles on CNT backbone composite electrodes for high-performance supercapacitors and Li-S batteries

Hierarchical-structured copper sulfide nanoneedles were grown on multi-walled carbon nanotube backbone (denoted as CuS@CNT) as electrodes for supercapacitors via a facile template-based hydrothermal conversion approach and further by simply impregnating sulfur into CuS@CNT (S@CuS@CNT) as electrodes for Li-S batteries. The electrochemical measurements showed that the resultant CuS@CNT composite electrodes deliver outstanding electrochemical performance with a specific capacitance up to 566.4 F g^?1 and cyclic stability of 94.5 % of its initial capacitance after 5000 cycles at a current density of 1 A g^?1. A synergistic effect arising from the unique hierarchical structure was responsible for the electrode performance, including a large surface area of 49.3 m² g^?1 and active CuS ultrafine nanoneedles firmly bonded to the highly conductive carbon nanotube (CNT) backbone. When used as an electrode material for Li-S batteries, the S@CuS@CNT (S content 59 wt%) exhibited satisfying electrochemical performance. The S@CuS@CNT electrode showed that coulombic efficiency was close to 100 % and capacity maintained more than 500 mA h g^?1 with progressive cycling up to more than 100 cycles even at a high current density. This strategy of stabilizing S with a small amount of copper sulfide nanoneedles can be a very promising method to prepare free-standing cathode material for high-performance Li-S batteries. The fabrication strategy presented here is low cost, facile, and scalable, which can be considered as a promising material for large-scale energy storage device. In particular, the use of CNT as backbone for the growth of active materials presents many potential merits owing to its lightweight, biodegradable, and stretchable characteristics.     

Ultrathin Mn Doped Ni-MOF Nanosheet Array for Highly Capacitive and Stable Asymmetric Supercapacitor

In this study, we demonstrate that an Mn-doped ultrathin Ni-MOF nanosheet array on nickel foam (Mn_0.1-Ni-MOF/NF) serves as a highly capacitive and stable supercapacitor positive electrode. The Mn_0.1-Ni-MOF/NF shows an areal capacity of 6.48 C cm⁻² (specific capacity C: 1178 C g⁻¹) at 2 mA cm⁻² in 6.0 m KOH, outperforming most reported MOF-based materials. More importantly, it possesses excellent cycle stability to maintain 80.6 % capacity after 5000 cycles. An asymmetric supercapacitor device utilizing Mn_0.1-Ni-MOF/NF as the positive electrode and activated carbon as the negative electrode attains a high energy density of 39.6 Wh kg⁻¹ at 143.8 Wkg⁻¹ power density with a capacitance retention of 83.6 % after 5000 cycles.     

A Two-Dimensional Porphyrin Coordination Supramolecular Network Cathode for High-Performance Aqueous Dual-Ion Battery

Iodine has great potential in the energy storage, but high solubility of I₃⁻ has seriously delayed its promotion. Benefited from abundant active sites and the open channel, two-dimensional coordination supramolecular networks (2D CSNs) is considered to be a candidate for the energy storage. Herein, a 2D porphyrin-CSN cathode named Zn-TCPP for aqueous iodine dual-ion battery (DIB) shows an excellent specific capacity of 278 mAh g⁻¹, and a high energy density of 340 Wh kg⁻¹ at 5 A g⁻¹, as well as a durable cycle performance of 5000 cycles and a high Coulombic efficiency of 98 %. Molecular orbital theory, UV/VIS, Raman spectroscopy and density functional theory (DFT) calculations reveal charge-transfer interaction between the donor of porphyrin nitrogen and the acceptor of I₃⁻, and computational fluid dynamics (CFD) simulations demonstrate the contribution of 2D layered network structure of Zn-TCPP to the penetration of I₃⁻.     

Bifuntional Materials Containing Preyssler-type Polyoxometalates and Iron Phenanthroline Stabilized with Poly (Allylamine Hydrochloride) for Electrochromic Energy Storage Devices

Electrochromic supercapacitors have received extensive attention owing to their ability to combine electrochromism and energy storage properties. In this paper, a bifunctional electrode material based on Preyssler-type tungstophosphate (P₅W₃₀), polyelectrolyte poly(allylamine hydrochloride) chain (PAH) modified by the iron complex (Fe(phen)₃) was synthesized by Layer-by-Layer method (LbL). Compared with the film without PAH, the composite film displays large optical contrast (35.17 %), fast response time (2.49/0.90 s for coloring/bleaching), great coloration efficiency (94.73 cm² ⋅ C⁻¹) and high specific capacitance (10.45 mF cm⁻²). Moreover, the good cycling stability (83.66 % retention of the original optical modulation after 1500 cycles, capacity retention rate is 91.46 % after 500 cycles) is achieved. In addition, the composite film is also able to visually detect the energy storage level through reversible and rapid color changes, and further use it to assemble device. This work provides an promising candidate for electrochromic and energy storage devices.     

Facile Synthesis of Ultra-Small Few-Layer Nanostructured MoSe2 Embedded on N,P Co-Doped Bio-Carbon for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Sodium/potassium-ion batteries (SIBs/PIBs) arouse intensive interest on account of the natural abundance of sodium/potassium resources, the competitive cost and appropriate redox potential. Nevertheless, the huge challenge for SIBs/PIBs lies in the scarcity of an anode material with high capacity and stable structure, which are capable of accommodating large-size ions during cycling. Furthermore, using sustainable natural biomass to fabricate electrodes for energy storage applications is a hot topic. Herein, an ultra-small few-layer nanostructured MoSe₂ embedded on N, P co-doped bio-carbon is reported, which is synthesized by using chlorella as the adsorbent and precursor. As a consequence, the MoSe₂/NP-C-2 composite represents exceedingly impressive electrochemical performance for both sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). It displays a promising reversible capacity (523 mAh g⁻¹ at 100 mA g⁻¹ after 100 cycles) and impressive long-term cycling performance (192 mAh g⁻¹ at 5 A g⁻¹ even after 1000 cycles) in SIBs, which are some of the best properties of MoSe₂-based anode materials for SIBs to date. To further probe the great potential applications, full SIBs pairing the MoSe₂/NP-C-2 composite anode with a Na₃V₂(PO₄)₃ cathode also exhibits a satisfactory capacity of 215 mAh g⁻¹ at 500 mA g⁻¹ after 100 cycles. Moreover, it also delivers a decent reversible capacity of 131 mAh g⁻¹ at 1 A g⁻¹ even after 250 cycles for PIBs.     

Unlocking the Interfacial Adsorption-Intercalation Pseudocapacitive Storage Limit to Enabling All-Climate,High Energy/Power Density and Durable Zn-Ion Batteries

Sluggish storage kinetics and insufficient performance are the major challenges that restrict the transition metal dichalcogenides (TMDs) applied for zinc ion storage, especially at the extreme temperature conditions. Herein, a multiscale interface structure-integrated modulation concept was presented, to unlock the omnidirectional storage kinetics-enhanced porous VSe_2−x⋅n H₂O host. Theory research indicated that the co-modulation of H₂O intercalation and selenium vacancy enables enhancing the interfacial zinc ion capture ability and decreasing the zinc ion diffusion barrier. Moreover, an interfacial adsorption-intercalation pseudocapacitive storage mechanism was uncovered. Such cathode displayed remarkable storage performance at the wide temperature range (−40–60 °C) in aqueous and solid electrolytes. In particular, it can retain a high specific capacity of 173 mAh g⁻¹ after 5000 cycles at 10 A g⁻¹, as well as a high energy density of 290 Wh kg⁻¹ and a power density of 15.8 kW kg⁻¹ at room temperature. Unexpectedly, a remarkably energy density of 465 Wh kg⁻¹ and power density of 21.26 kW kg⁻¹ at 60 °C also can be achieved, as well as 258 Wh kg⁻¹ and 10.8 kW kg⁻¹ at −20 °C. This work realizes a conceptual breakthrough for extending the interfacial storage limit of layered TMDs to construct all-climate high-performance Zn-ion batteries.     

One-Pot Hydrothermal Synthesis of Ternary 1T-MoS2/Hexa-WO3/Graphene Composites for High-Performance Supercapacitors

A new ternary composite of 1T-molybdenum disulfide, hexagonal tungsten trioxide, and reduced graphene oxide (M-W-rGO) is synthesized by using a one-pot hydrothermal process. The synergetic effect of 1T-MoS₂ and hexa-WO₃ nanoflowers improves the electrochemical performance for supercapacitors by inducing additional active sites and hexagonal tunnels, respectively, which lead to high storage capacity and easy transfer of electrolyte ions. The ternary M-W-rGO composite has a high specific capacitance of 836 F g⁻¹ at 1 A g⁻¹, which is nearly twice that of binary composites of M-rGO and W-rGO with high capacitance retention of 86.35 % after 3000 cycles at a high current density of 5 A g⁻¹. This study provides a new ternary composite that can be used as an electrode material for high-performance supercapacitors.     

Facile synthesis of layered reduced graphene oxide–copper sulfide (rGO-CuS) hybrid electrode for all solid-state symmetric supercapacitor

A straightforward process for synthesis of hybrid porous electrode material composed of reduced graphene oxide (rGO) and copper sulfide (CuS) with layered structure on the stainless steel substrate is developed. As-synthesized hybrid electrode shows hexagonal crystal structure of CuS with 77 m² gm⁻¹ specific surface area and 22 nm average pore size. The specific capacitance obtained with rGO-CuS5 hybrid electrode is 1201 F g⁻¹ at the sweep rate of 5 mV s⁻¹ in 1 M LiClO₄ aqueous electrolyte. The majority of charge stored by diffusion-controlled process indicates benefits of layered structures for solid-state energy storage. The rGO-CuS5-based hybrid symmetric supercapacitor delivers a specific capacitance (C_s) as high as 109 F g⁻¹ at a sweep rate of 5 mV s⁻¹ with polyvinyl alcohol (PVA)-LiClO₄ gel electrolyte. Also, the specific energy of 44 Wh kg⁻¹ and specific power of 1.4 kW kg⁻¹ with 87% stability after 6000 cycles at an applied current of 5 mA are obtained. The simple process of synthesis of layered hybrid electrode material for flexible supercapacitor promises its use in smart textile and wearable electronic devices.

Graphical abstract

     

Capacitive Properties of the Binder‐Free Electrode Prepared from Carbon Derived from Cotton and Reduced Graphene Oxide

The binder‐free composite films of reduced graphene oxide (rGO ) and activated carbon derived from cotton (aCFC ) have been fabricated and used as electrodes for electrochemical capacitors (ECs ) to avoid the decrease of capacitive performance in traditional process caused by the additional binder. The optimal aCFC is prepared at 850 °C when the mass ratio of carbon and potassium hydroxide is 1 to 4. The optimal composite film prepared from the mass ratio of aCFC /GO =2/1 exhibits porous structure, and has a specific surface area of 849.6 m²•g⁻¹ and a total pore volume of 0.61 mL •g⁻¹. Based on the two‐electrode system testing in 6.0 mol/L KOH electrolyte, the optimal composite has specific capacitance of about 202 F•g⁻¹, 374 mF •cm⁻² and 116 F•cm⁻³ in terms of mass, area and volume, and shows excellent rate capability and good cyclic stability (91.7% retention of the initial capacitance after 5000 cycles). Furthermore, the assembled solid‐state ECs by using KOH /polyvinyl alcohol as electrolyte show good mechanical stability and capacitive performances after repeated bending cycles. It is proved that this method is effective to fabricate binder‐free electrodes for ECs and will open up a novel route for the reuse of waste cotton.