Crystal structure of Na3PO4 · 12H2O

The crystal structure of trisodium monophosphate hemihydrate was determined. The space group is $\text{C2}\text{c}$ and a unit cell contains eight formula units. The unit cell dimensions of $\text{Na}{}_3\text{PO}{}_4\text{·}\text{1}\text{2}\text{H}{}_2\text{O}$ are a = 9.631(3), b = 5.416(2), c = 16.938(8) Å, β = 102.60(5)°. The final R value is 0.027 for a set of 1430 independent reflections. This atomic arrangement is mainly a three-dimensional network of distorted NaO₆ octahedra. The hydrogen bonding scheme is given.     

Rate of reactions between D2O and CaxAlyOz

The rate of the reaction between D₂O and the calcium aluminum oxides Ca₃Al₂O₆, Ca₅Al₆O₁₄, CaAl₂O₄, and CaAl₄O₇ was investigated by on-line neutron diffraction powder methods at temperatures from room temperature to 100°C. The rate of the reaction increases with increasing calcium content of the compounds and with increasing temperature for each of the compounds. The crystallographic stable hydrate Ca₃Al₂(OD)₁₂ is obtained from CaAl₄O₇ and CaAl₂O₄ at temperatures above 63°C, from Ca₅Al₆O₁₄ at temperatures above 49°C, and from Ca₃Al₂O₆ at temperatures as low as 7°C.     

Solid state photodecomposition of alkaline earth tris/malonato/ferrates/III/

Solid state photolysis of alkaline earth tris/malonato/ferrates/III/, i.e., M₃[Fe(CH₂C₂O₄)₃]₂.xH₂O /M=Mg, Ca, Sr, Ba/ has been investigated employing Mössbauer, infrared and reflectance spectroscopic techniques. The complexes were irradiated for 400 h using a medium pressure mercury vapour lamp of 250 Watts. Photoreduction led to the formation of M[Fe^II(CH₂C₂O₄)₂(H₂O)₂]. The extent of photoreduction showed the following order: Ca>Sr>Mg>Ba. The results have been compared with those of analogous alkaline earth tris/oxalato/ferrates/III/.     

Synthesis and characterization of Ti1−2xNbxNixO2−x/2 solid solutions

Doped-rutile has been traditionally used in ceramic pigments for its intense optical properties. In this paper, we compare the classical ceramic synthesis of Ti_1−2xNb_xNi_xO_2−x/2 system with the sol-gel methodology, which allows a reduction of the anatase-rutile transformation temperature. The composition was optimised in order to obtain a unique rutile phase with the minimum amount of pollutant Ni(II) and enhanced chromatic coordinates. Incorporation of the doping ions in the rutile structure was corroborated by XRD and Rietveld refinements. The species responsible for the colour mechanism were studied by different techniques. UV-VIS spectroscopy showed the characteristic features of Ni²⁺ ions, whose existence was corroborated by EPR and magnetic measurements. From these results, (Ni,Nb)doped-TiO₂ powder samples can be now shaped as thin films, monoliths, etc. by using sol-gel methodology without modifying their properties. This study introduces new possibilities of coloured TiO₂-based solid solutions in new combined advanced applications (colouring agent and photocatalyst, etc.).     

Structure refinement, dielectric, pyroelectric and Raman characterizations of Ba1−xLax(1−y)/2Euxy/2Nax/2TiO3 solid solution

The perovskite-type oxides Ba_1−xLa_x(1−y)/2Eu_xy/2Na_x/2TiO₃ (0?x?0.5 and xy=0.04) were synthesized and characterized by X-ray diffraction as well as dielectric measurements and Raman spectroscopy. The crystal structure of these ceramics has been determined by the Rietveld refinement powder X-ray diffraction data at room temperature. These compounds crystallize at room temperature in tetragonal space group P4mm for 0?x?0.1 and in the cubic group for 0.2?x?0.5. The phase transition temperature T_C (or T_m) decreases as x content increases. The degree of diffuseness of the phase transition is more pronounced for higher x content, implying the existence of a composition-induced diffuse phase transition of the ceramics with x?0.1. The evolution of the Raman spectra was studied as a function of various compositions at room temperature. The polarization state was checked by pyroelectric measurements.     

The crystal structure of Cs[VOF3] · 12H2O

The crystal structure of $\text{Cs[VOF}{}_3\text{]}\text{·}\text{1}\text{2}\text{H}{}_2\text{O}$ has been determined and refined on the basis of three-dimensional X-ray diffractometer data (MoKα radiation). The structure is monoclinic, a = 7.710(2), b = 19.474(7), c = 7.216(2)Å, β = 116.75(1)°, V = 967.5ų, Z =8, space group Cc (No. 9). The final R and R_w were 0.0295 and 0.0300, respectively, for 1356 independent reflections and 117 variables.The structure contains two crystallographically different VOF₅ octahedra linked so as to form complex chains. Two non-equivalent octahedra share one FF edge, forming V₂O₂F₈ doublets. Two F atoms, connected to different V atoms within the doublet, form an edge in the adjacent equivalent V₂O₂F₈ unit thus continuing the chain. The VO distances are 1.583(7) and 1.595(7) Å. The VF distances are in the range 1.881-2.205 Å, mean value: 1.989 Å. The H₂O group is a crystal water molecule.     

Study of CuO/Ce0.8Zr0.2O2 catalysts for low-temperature CO oxidation

Summary Copper oxide catalysts supported on Ce_0.8Zr_0.2O₂ were prepared via an impregnation method and characterized by XRD and H₂-TPR techniques. The catalytic activity of the samples for low-temperature CO oxidation was investigated by means of a microreactor-GC system. The influence of calcination temperature, calcination time and different CuO content on the catalytic activity was studied. TPR analysis indicated that well-dispersed CuO was responsible for the low-temperature CO oxidation. The results of the investigation showed that the calcination temperature and CuO loadings had larger influence than the calcination time.     

Water-containing derivative phases of the Srn+1FenO3n+1 series

The n=1, 2, 3 and ∞ members of the homologous series Sr_n+1Fe_nO_3n+1 of layered iron oxides are investigated for their tendency to accept additional layers of water in their crystals. The phases possess a Ruddlesden-Popper-type SrO-(SrO-FeO₂)_n crystal structure, where the n=∞ limit is nothing but the perovskite structure. It is revealed that the n=1, 2 and 3 phases readily accommodate one or two layers of water between adjacent SrO layers, whereas the n=∞ member which lacks the SrO-SrO double-layer unit remains intact in the presence of water. The speed of the water intercalation process is found to decrease with increasing n. Among the layered water derivatives, the n=2 phase with two water molecules per formula unit, i.e. Sr₃Fe₂O₇·2H₂O, was found to be most stable.     

Oxidative dehydrogenation of crotonaldehyde overK2HPMo12O40catalyst

Summary The oxidative dehydrogenation of crotonaldehyde to furan and maleic anhydride was carried out over K₂HPMo₁₂O₄₀catalyst. A positive effect of water vapor on furan formation is explained by ability of the catalyst to isomerize 2E- to 2Z-crotonaldehyde.</o:p>     

Electrochemical investigations of the system LiUO2F2

Uranyl fluoride, UO₂F₂, and a lithiated uranyl fluoride, Li₂UO₂F₂, have been studied as the electrochemically active materials in nonaqueous lithium batteries. Both open circuit and discharge potentials have been measured as a function of utilization. The reversibility of the couple has been demonstrated. It is concluded that the phase Li₂UO₂F₂ is an end member of a nonstoichiometric homogeneity range of generalized composition Li_xUO₂F₂ where x varies from 0 to 2.     

正极材料Li_(0.99)Nb_(0.01)Fe_(1-x)Mg_xPO_4/C的制备及电化学性能的研究

采用两步固相反应合成了锂、铁双位掺杂的锂离子电池正极材料Li0.99Nb0.01Fe1-xMgxPO4/C(x=0,0.01,0.02,0.03,0.04)。通过X射线衍射(XRD)、扫描电镜(SEM)以及恒电流充放电测试,研究了复合材料的晶体结构、形貌以及电化学性能。实验结果表明,制备的Li0.99Nb0.01Fe1-xMgxPO4/C(x=0,0.01,0.02,0.03,0.04)为纯相,掺杂适量的Nb5+、Mg2+离子可减小材料的晶粒尺寸,当Nb离子掺杂量为1mol%、Mg离子掺杂量为3mol%时,Li0.99Nb0.01Fe0.97Mg0.03PO4/C的电化学性能最佳。室温下,0.2C、1C、2C、4C(1C=170mA·g-1)倍率充放电其首次放电比容量分别为153.7、149.7、144.6、126.4mAh·g-1,即使在8C倍率下放电其放电比容量也有92.2mAh·g-1,并表现出良好的循环性能。     

Physico-chemical studies on thermal analyses of sodium hexa/carboxylato/ferrates/III/

The thermolysis of sodium hexa/benzoato/ferrate/III/, i. e. Na₃[Fe/C₆H₅COO/₆].4.5H₂O has been investigated at different temperatures in air using Mössbauer, infrared spectroscopic and derivatographic techniques /DTG, DTA, TG/. The thermal decomposition proceeds without the reduction of iron/III/. An increase in particle size of -Fe₂O₃ formed during thermolysis has been observed with increasing temperature. The end product, -NaFeO₂ is formed as a result of the solid state reaction between -Fe₂O₃ and sodium carbonate.     

A study of the spinel materials LiTi2O4 and Li43Ti53O4 by photoelectron spectroscopy

HeI-excited valence-band ultraviolet photoelectron spectra and MgKα-excited Ti-2p X-ray photoelectron spectra are reported for the spinel materials LiTi₂O₄ and $\text{Li}{}_{\mathrm{<mtext>4</mtext><mtext>3</mtext>}}\text{Ti}{}_{\mathrm{<mtext>5</mtext><mtext>3</mtext>}}\text{O}{}_4$. The presence of a Fermi edge in the ultraviolet photoelectron spectrum of LiTi₂O₄ confirms the metallic nature of this material, although the measured density of states at the Fermi energy is much lower than that expected from an independent-electron interpretation of the magnetic susceptibility. This difference is attributed to a strong interaction of the conduction electrons with the lattice vibrations. The localization of conduction electrons that occurs in the final state in the Ti-2p X-ray photoelectron spectrum of LiTi₂O₄ is attributed to a Coulomb interaction with a core hole.     

Wide-band proton NMR study of a new hydrate WO3 · 13H2O in the powder form

The proton NMR of a new hydrate $\text{WO}{}_3\text{·}\text{1}\text{3}\text{H}{}_2\text{O}$ as a powder was studied between ?140 and 100°C. The lattice can be considered as “rigid” at temperatures below ?80°C. The structural water corresponding to the above formula is coordinated in the form of water molecules. Above ?80°C it undergoes thermally activated hindered rotation. The compound also retains adsorbed surface “water,” partly in the form of strongly bonded OH groups, partly in the form of water molecules. Degassing at 175°C and 10^?4 Torr removes the adsorbed molecular water but leaves OH groups bonded to the surface.     

Structural characterisation of the perovskite series SrxCa1−x−yNdyMnO3: Influence of the Jahn-Teller effect

The crystal structures of the perovskite manganites Sr_xCa_1−x−yNd_yMnO₃ with y=0.1 or 0.2 have been investigated using synchrotron X-ray powder diffraction. At room temperature the structures change from depending on the cation distribution, the different structures exhibiting different tilts of the MnO₆ octahedra. High temperature diffraction measurements demonstrate the presence of, an apparently continuous, isosymmetric I4/mcm to I4/mcm phase transition associated with the removal of long range orbital ordering. Heating the manganites to still higher temperatures results in a continuous transition to the cubic structure. A feature of such transitions is the continuous evolution of the octahedral tilt angle through the I4/mcm to I4/mcm phase transition. The orthorhombic structures do not exhibit orbital ordering and although a first order transition to the tetragonal structure is observed in Sr_0.4Ca_0.5Nd_0.1MnO₃, this high temperature tetragonal structure does not exhibit orbital ordering.     

Diatomics-in-molecules potential energy surfaces for the collision-induced dissociation of excited Li2(1Πu) by helium atoms

The 1 ¹A″, 2 ¹A″, 3 ¹A′, 4 ¹A′, and 5 ¹A′ potential energy surfaces (PES) relevant to the collision-induced dissociation (CID) process $\text{Li}{}_2\text{(}{}^1\text{Π}{}_{\mathrm{u}}\text{) +}\text{He}\text{(}{}^1\text{S}{}_{\mathrm{g}}\text{) →}\text{Li}\text{(}{}^2\text{S}{}_{\mathrm{g}}\text{) +}\text{Li}\text{(}{}^2\text{P}{}_{\mathrm{u}}\text{) +}\text{He}\text{(}{}^1\text{S}{}_{\mathrm{g}}\text{)}$ are approximated by three diatomics-in-molecules models differing from each other in the source of diatomic input. The semi-empirical model, the most realistic of the three, shows the CID to depend critically on the position of avoided crossings on the PES and on the magnitude of the non-adiabatic coupling, which is estimated numerically. The ¹A″ calculations support a qualitative two-step mechanism recently proposed by Poppe and Whitton. The ¹A′ surfaces exhibit a degree of complexity which precludes a simple picture of the CID process. The results suggest that only a quantum scattering treatment or perhaps a very detailed surface-hopping trajectory calculation will be adequate for the interpretation of the experimental observations on this reaction, and the estimation of the cross sections.     

Metallierungsreaktionen an cyclometallierten komplexen des typs Mo-C6H4CH2PR2)2(M = Pd,Pt)

The complexes of type $\text{M}\text{o}\text{-C}{}_6\text{H}{}_4\text{CH}{}_2\text{P}$R₂)₂ (M = Pd, Pt) are readily deprotonated by n-Buli under various conditions yielding μ-C-bis-dilithiated species. The resulting carbanions are attacked by the electrophiles Mel, Me₃SiCl and Ph₂PCl to form the corresponding disubstituted derivatives. The reaction with AuCl . PPh₃ yields heterobimetallic complexes with two different MC σ-bonds. The compounds obtained are analytically and spectroscopically characterized.     

Heat capacity measurements of MnxFe3−xO4

Heat capacities of Mn_xFe_3?xO₄ with the composition x = 1.0, 1.5, and 2.0 were measured from 200 to 740 K. λ-type heat capacity anomalies due to the ferri-paramagnetic transition were observed for all the compositions. The transition temperatures were 577, 471, and 385 K for the composition x = 1.0, 1.5 and 2.0, respectively, which are in good agreement with the results of magnetic measurements. The difference in heat capacities between the different samples was small except for the temperature range of the transition. The magnetic contribution to the observed heat capacity was obtained by assuming that the heat capacity can be expressed by the sum of the lattice heat capacity C_v (l), the dilation contribution C(d), and the magnetic contribution C(m). Entropy changes due to the transition were obtained from C(m) as 55.5, 50.7 and 49.2 J K^?1 mole^?1 for the composition x = 1.0, 1.5, and 2.0, respectively. The entropy changes were also calculated by assuming the randomization of unpaired electron spins on each ion, but they were from 6 to 10 J K^?1 mole^?1 smaller than the observed ones. The difference between the experimental and the calculated values is roughly explained by taking into account the cation exchange reaction between the tetrahedral and the octahedral sites in the spinel structure.     

Pb2.85Ba2.15Fe4SnO13: A new member of the AnBnO3n−2 anion-deficient perovskite-based homologous series

Pb_2.85Ba_2.15Fe₄SnO₁₃, a new n=5 member of the anion-deficient perovskite based A_nB_nO_3n−2 (A=Pb, Ba, B=Fe, Sn) homologous series, was synthesized by the solid state method. The crystal structure of Pb_2.85Ba_2.15Fe₄SnO₁₃ was investigated using a combination of neutron powder diffraction, electron diffraction, high angle annular dark field scanning transmission electron microscopy and Mössbauer spectroscopy. It crystallizes in the Ammm space group with unit cell parameters a=5.7990(1) Å, b=4.04293(7) Å and c=26.9561(5) Å. The Pb_2.85Ba_2.15Fe₄SnO₁₃ structure consists of quasi two-dimensional perovskite blocks separated by 1/2[110](1?01)_p crystallographic shear (CS) planes. The corner-sharing FeO₆ octahedra at the CS planes are transformed into edge-sharing FeO₅ distorted tetragonal pyramids. The octahedral positions in the perovskite blocks between the CS planes are jointly taken up by Fe and Sn, with a preference of Sn towards the position at the center of the perovskite block. The chains of FeO₅ pyramids and (Fe,Sn)O₆ octahedra of the perovskite blocks delimit six-sided tunnels at the CS planes occupied by double chains of Pb atoms. The compound is antiferromagnetically ordered below T_N=368±15 K.     

水在C12-EOx-C12•2Br/正己醇/正庚烷W/O微乳中的状态

以FT-IR方法研究了水/C₁₂-EO_x-C₁₂•2Br/正己醇/正庚烷形成的W/O微乳中水的状态. 结果表明, 其中的水存在4种状态, 分别为阳离子头基结合水、反离子结合水、类似本体的水以及束缚在微乳栅栏层中的水. 由解卷积技术分解FT-IR谱图, 进而获得每个表面活性剂分子对应于这4种状态水分子的数目n_N＋, n_Br-, n_b和n_f. 随着水含量(W₀)增加, n_b急剧增大, n_N＋少许上升, 而n_f和n_Br-维持不变, 这说明微乳水核逐渐长大, 且在所考察W₀范围内, 表面活性剂头基解离度保持不变.