Non-enzymatic electrochemical CuO nanoflowers sensor for hydrogen peroxide detection

The electrocatalytic activity of a CuO flower-like nanostructured electrode was investigated in terms of its application to enzyme-less amperometric H₂O₂ sensors. The CuO nanoflowers film was directly formed by chemical oxidation of copper foil under hydrothermal condition and then used as active electrode material of non-enzymatic electrochemical sensors for H₂O₂ detection under alkaline conditions. The sensitivity of the sensor with CuO nanoflowers electrode was 88.4 μA/mM cm² with a linear response in the range from 4.25 × 10⁻⁵ to 4 × 10⁻² M and a detection limit of 0.167 μM (S/N = 3). Excellent electrocatalytic activity, large surface-to-volume ratio and efficient electron transport property of CuO nanoflowers electrode have enabled stable and highly sensitive performance for the non-enzymatic H₂O₂ sensor.     

Controllable synthesis of hierarchical nanostructured hollow core/mesopore shell carbon for electrochemical hydrogen storage

Hierarchical nanostructured hollow core/mesopore shell carbon (HN-HCMSC) represents an innovative concept in electrochemical hydrogen storage. This work deals with physical characteristics and electrochemical hydrogen storage behavior of the HN-HCMSCs, produced by a replica technique using solid core/mesopore shell (SCMS) silica as template. HN-HCMSCs with various core sizes and/or shell thicknesses have been fabricated through the independent control of the core sizes and/or shell thicknesses of the SCMS silica templates. The superb structural characteristics of the HN-HCMSCs including large specific surface area and micropore volume, and particularly well-developed three-dimensionally interconnected hierarchical nanostructure (hollow macroporous core in combination with meso-/microporous shell), provide them with great potential for electrochemical hydrogen storage. A discharge capacity up to 586 mAh/g, corresponding to 2.17 wt % hydrogen uptake, has been demonstrated in 6 M KOH for the HN-HCMSC with a core size of 180 nm and a shell thickness of 40 nm at a discharge rate of 25 mA/g. Furthermore, the HN-HCMSC also possesses excellent cycling capacity retainability and rate capability.     

Fabrication of Pt/polypyrrole hybrid hollow microspheres and their application in electrochemical biosensing towards hydrogen peroxide

Pt/polypyrrole (PPy) hybrid hollow microspheres were successfully prepared by wet chemical method via Fe₃O₄ template and evaluated as electrocatalysts for the reduction of hydrogen peroxide. The as-synthesized products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), X-ray diffraction (XRD), inductive coupled plasma emission spectrum (ICP) and Fourier-transform infrared spectra (FTIR) measurements. The results exhibited that ultra-high-density Pt nanoparticles (NPs) were well deposited on the PPy shell with the mean diameters of around 4.1 nm. Cyclic voltammetry (CV) results demonstrated that Pt/PPy hybrid hollow microspheres, as enzyme-less catalysts, exhibited good electrocatalytic activity towards the reduction of hydrogen peroxide in 0.1 M phosphate buffer solution (pH = 7.0). The composite had a fast response of less than 2 s with linear range of 1.0-8.0 mM and a relatively low detection limit of 1.2 μM (S/N = 3). The sensitivity of the sensor for H₂O₂ was 80.4 mA M⁻¹ cm⁻².     

Electrocatalytic activity of horseradish peroxidase/chitosan/carbon microsphere microbiocomposites to hydrogen peroxide

Colloidal carbon microspheres (CMS) are dispersed in chitosan (CHIT) solution to form an organic-inorganic hybrid with excellent micro-environment for the immobilization of biomolecules. A novel amperometric biosensor for the determination of hydrogen peroxide (H(2)O(2)) has been constructed by entrapping horseradish peroxidase (HRP) in as-synthesized CMS/CHIT hybrid. The modification of glassy carbon electrode is made by a simple solution-evaporation method. The electrochemical properties of the biosensor are characterized in electrochemical methods. The proposed biosensor shows high sensitive determination and fast response to H(2)O(2) at -0.15 V. The constructed HRP/CHIT/CMS/GC electrode also exhibits a fine linear correlation with H(2)O(2) concentration. The calculated value of the apparent Michaelis-Menten constant, 2.33 mM, suggests that the HRP in CMS/CHIT hybrid keeps its native bioactivity and has high affinity for H(2)O(2).     

A liver tissue-based electrochemical sensor for hydrogen peroxide

A slice of bovine liver covering an oxygen electrode is used to provide a selective sensor for > 10^-5 M hydrogen peroxide. The sensor is less susceptible to temperature and pH changes than a similar electrode covered with catalase, and it has a much longer lifetime.     

Bimetallic nanowire sensors for extracellular electrochemical hydrogen peroxide detection in HL-1 cell culture

Journal of Solid State Electrochemistry - The present study of nanoelectrochemical sensors prepared by directed electrochemical nanowire assembly (DENA) is defined by the requirements of...     

Activation of titanium electrodes for voltammetric detection of oxygen and hydrogen peroxide in alkaline media

Bright, freshly-polished Ti electrodes give minimal cathodic response for O₂ and H₂O₂ in 1.0 M NaOH. However, the response is increased gradually by repeated application of a triangular waveform within the approximate potential limits of O₂ response (ca. −1.5 to −0.7 V vs. SCE). This same voltammetric pretreatment applied for excessive periods results in formation of golden films on the Ti surfaces that are active for reduction of O₂ and H₂O₂. Levich plots of cathodic current for O₂ and H₂O₂ at rotated golden-Ti disk electrodes in 1.0 M NaOH (−1.35 V) are linear over a large range of rotational velocity (42 to 513 rad s⁻¹), a behavior considered to be indicative of fast heterogeneous kinetics. Ring-disk data demonstrate that a small amount of H₂O₂ is produced throughout the potential region for O₂ reduction and H₂O₂ is concluded to be an intermediate product in the O₂-reduction mechanism. These observations are consistent with those reported previously for single-crystal TiO₂ electrodes.     

Ferric ion immobilized on three-dimensional nanoporous gold films modified with self-assembled monolayers for electrochemical detection of hydrogen peroxide

A fast, simple square wave potential method is developed for the fabrication of a three-dimensional (3D) nanoporous gold (NPG) film. The nanostructures are characterized and confirmed by scanning electronic microscopy (SEM) and cyclic voltammetry (CV). The nanostructures modified with self-assembled monolayers (SAMs) are employed as an electrode substrate to immobilize inorganic iron(III) ion. After immobilization, iron(III) ion undergoes an effective direct electron transfer reaction with a pair of well-defined redox peak at -256 ± 10 mV (pH 7.0). The iron(III) ion modified electrode displays the excellent electrocatalytic performance for reduction of hydrogen peroxide, and thus can be used as an electrochemical sensor for detecting hydrogen peroxide with a low detection limit (1.0 × 10(-9) M), a wide linear range (9.0 × 10(-7)~5.0 × 10(-4) M), as well as good stability, selectivity and reproducibility.     

A review on recent advances in hydrogen peroxide electrochemical sensors for applications in cell detection

Hydrogen peroxide (H₂O₂) is a very simple bioactive small molecule. In living organisms, H₂O₂ plays an important role in intracellular signaling. It is involved in many physiological processes including cellular physiology, intracellular signaling, oxidative damage and disease progression. The tumor microenvironment enriched with H₂O₂. Several electrochemical sensors have been developed and some have been put on the market. Such electrochemical sensors provide efficient, cost-effective, rapid and highly selective method of H₂O₂ detection. So far, much progress has been made in the designing of materials and construction of H₂O₂ sensors. This review describes the advances in the application of H₂O₂ electrochemical sensors in cell detection. Enzyme-based sensors have been applied in diverse applications. In addition, recent advancements in nanotechnology have improved the development of nanozymes-based sensors. The application of noble metals, metal oxides, polymers, carbon materials and other two-dimensional materials in the design of H₂O₂ sensors are discussed in detail. Moreover, the bio-stimulant types of H₂O₂ sensor are summarized. Finally, the challenges and future perspectives in the application of H₂O₂ electrochemical sensors in biological detection are discussed.     

Novel polyaniline/titanium nitride nanocomposite: controllable structures and electrical/electrochemical properties

We first present the preparation of a new class of polyaniline (PANI)/titanium nitride (TiN) nanocomposites by in situ chemical polymerization in the presence of TiN nanoparticles. It was found that nanocrystalline TiN with an average diameter of approximately 20 nm incorporated and dispersed homogeneously within the polymer matrix, leading to enhanced conductivity and electrochemical activity. The interaction between nanocrystalline TiN and the polymer matrix was characterized by XRD, FTIR, and UV-vis spectra. Interestingly, the morphology and structure of the PANI/TiN were controlled by the content of TiN nanoparticles in the composites. Structural changes are observed at TiN > or = 30 wt %, where the in situ synthesis results in rod-shape composite particles. The electrical and electrochemical properties of the nanocomposites were also affected by the structure. The mechanisms of the property changes with the TiN contents are discussed. The structural difference was used to explain the different activation energies for the conductance process in emeraldine base (EB)/TiN composites.     

Future perspectives for the advancement of electrochemical hydrogen peroxide production

Hydrogen peroxide (H₂O₂)is an important chemical with multiple uses across domestic and industrial settings. With a global need for wider adoption of green synthetic methods, there has been a growing interest in the electrochemical synthesis of H₂O₂ from oxygen reduction or water oxidation. State-of-the-art catalyst and reactor developments are beginning to advance to a stage where electrochemical synthesis is discussed as a viable alternative to current industrial methods. In this review, we highlight some of the most promising candidates for H₂O₂ electrosynthesis technologies and what further advancements are needed before the electrochemical route could challenge the ubiquitous anthraquinone process.     

Nitroxide synthesis using the methyltrioxorhenium/hydrogen peroxide system

Some secondary amines of varying structural type have been oxidized by the methyltrioxorhenium/hydrogen peroxide system to the corresponding nitroxides in excellent yield. These results, coupled with our earlier work using this system, indicate the striking parallel between this chemistry and that of the dioxiranes. While the yields in the dioxirane and methyltrioxorhenium/hydrogen peroxide methods are comparable, the latter method must be regarded as superior since it is catalytic. © 1998 John Wiley & Sons, Inc. Heteroatom Chem 9:347–350, 1998     

Defect engineering of single-walled carbon nanohorns for stable electrochemical synthesis of hydrogen peroxide with high selectivity in neutral electrolytes

Hydrogen peroxide(H₂O₂)is one of the most important chemicals,which are commonly used in the paper and pulp industry,water purification and environmental protection[1-3].Most of the commercial available H₂O₂ is produced by the anthraquinone oxidation process,which is environment unfriendly.     

Grape tissue-based electrochemical sensor for the determination of hydrogen peroxide

The use of grape tissue as a source of catalase for the determination of hydrogen peroxide is reported. A slice of grape tissue attached to the membrane of a Clark-type oxgen sensor was used to monitor the oxidation of hydrogen peroxide by catalase. At the steady state, the sensor responds linearly to hydrogen peroxide in the concentration range 1 × 10^?5–5 × 10^?4 M. The response time (T₉₀) was of the order of 1 min for this sensor. No interference was observed from ethanol, amino acids, glucose and lactic acid. The long-term stability of the grape tissue sensor was much better than previously reported immobilized enzyme and liver tissue-based hydrogen peroxide sensors.     

Comparative photodegradation study of atrazine and desethylatrazine in water samples containing titanium dioxide/hydrogen peroxide and ferric chloride/hydrogen peroxide

Results are reported for a comparative photodegradation study of atrazine and desethylatrazine in water using TiO2/H2O2, FeCl3/H2O2, and photolysis. Deionized water and ground water spiked with atrazine or desethylatrazine at 36 micrograms/L were irradiated by using a xenon arc lamp and/or sunlight. After irradiation, the water samples containing the spiked pesticides were preconcentrated by using C18 solid-phase extraction disks and analyzed by gas chromatography with nitrogen-phosphorus and mass spectrometric detection. A relative percentage of 7% desethylatrazine was detected in samples removed after 20 and 4 min of sensitized photodegradation with TiO2 and Fe3+, respectively. Atrazine and desethylatrazine did not degrade when solar irradiation (in winter) and deionized water were used. Atrazine degraded faster than desethylatrazine when a xenon arc lamp or sunlight plus FeCl3 was used, with half-lives varying from 5 to 11 min and from 19 to 26 min, respectively. In other photodegradation experiments, the degradation of atrazine was slightly higher than that of desethylatrazine. This study shows that desethylatrazine has slightly higher stability than atrazine in environmental water samples; this stability accounts for the frequent detection of desethylatrazine together with atrazine in natural waters.     

Dinuclear vanadium complexes with rigid phenylpolycarboxylate ligands: synthesis,structure, and catalytic bromination reaction with potential detection of hydrogen peroxide

Vanadium complexes (VO)₂(2,2′-bipy)₂(bta)(H₂O)₂ (1) and (VO)₂(1,10-phen)₂(bta)(H₂O)₂ (2) (H₄bta?=?1,2,4,5-benzenetetracarboxylic acid, 2,2′-bipy?=?2,2-bipyridine and 1,10-phen?=?1,10-phenanthroline) have been synthesized by the reaction of V₂(SO₄)₃, H₄bta, 2,2′-bipy (for 1) and 1,10-phen (for 2) by hydrothermal methods. The complexes were characterized by elemental analysis, IR, UV–vis, thermogravimetric analyses, and single-crystal X-ray diffraction. Structural analyses indicate that 1 and 2 are both VO-bta-N-heterocycle system complexes. The central vanadium is coordinated by N₂O₄ donors to form a distorted octahedral geometry. The complexes exhibit catalytic bromination activity in a single-pot reaction with conversion of phenol red to bromophenol blue in a mixed solution of H₂O-DMF at 30?±?0.5?°C with pH 5.8, indicating that they can be considered as a functional model of vanadium-dependent haloperoxidases. The practical application of H₂O₂ detection has also been studied.     

Preparation and electrochemical hydrogen storage of boron nitride nanotubes

Boron nitride (BN) nanotubes were synthesized through chemical vapor deposition over a wafer made by a LaNi5/B mixture and nickel powder at 1473 K. Scanning electron microscopy, transmission electron microscopy, energy-dispersive spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were performed to characterize the microstructure and composition of BN nanotubes. It was found that the obtained BN nanotubes were straight with a diameter of 30-50 nm and a length of up to several microns. We first verify that the BN nanotubes can storage hydrogen by means of an electrochemical method, though its capacity is low at present. The hydrogen desorption of nonelectrochemical recombination in cyclic voltammograms, which is considered as the slow reaction at BN nanotubes, suggests the possible existence of strong chemisorption of hydrogen, and it may lead to the lower discharge capacity of BN nanotubes. It is tentatively concluded that the improvement of the electrocatalytic activity by surface modification with metal or alloy would enhance the electrochemical hydrogen storage capacity of BN nanotubes.     

A nonenzymatic electrochemical sensor for the detection of hydrogen peroxide in vitro and in vivo fibrosis models

Fibrosis occurs due to the excessive deposition of extracellular matrix caused by cell injury. After various types of tissue injury, the dysregulation of the internal response can eventually lead to the destruction of organ structure and dysfunction. There is increasing evidence that oxidative stress, which is characterized by excessive production of hydrogen peroxide(H₂O₂), is an important cause of fibrosis. Therefore, we synthesized a biosensitive and efficient electroche...     

纳米金修饰锌基金属有机框架用于过氧化氢的检测研究

本研究利用溶剂热法制备锌基金属有机框架材料(ZIF-8),再通过电沉积法将金纳米颗粒(Au NPs)负载到ZIF-8上,构建无酶电化学传感器(Au NPs/ZIF-8/GCE)用于过氧化氢(H2 O2)的电化学测定.通过扫描电子显微镜(SEM)和透射电子显微镜(TEM)对修饰材料的形貌进行了表征.实验采用循环伏安法(C...     

Enhanced stability of a Prussian blue/sol-gel composite for electrochemical determination of hydrogen peroxide

We have prepared a sol–gel that incorporates Prussian Blue (PB) as a redox mediator. It is shown that the PB in the pores of the sol–gel retains its electrochemical activity and is protected from degradation at acidic and neutral pH values. TEM and EDX studies revealed the PB nanoparticles to possess a cubic crystal structure and to be well entrapped and uniformly dispersed in the pores of the matrix. The electrocatalytic activity of the materials toward hydrogen peroxide (H₂O₂) was studied by cyclic voltammetry and amperometry. The modified electrode displays good sensitivity for the electrocatalytic reduction of H₂O₂ both in acidic (pH 1.4) and neutral media. The sensor has a dynamic range from 3 to 210 μM of H₂O₂, and the detection limit is 0.6 μM (at an SNR of 3).