TiSiW12O40／TiO2催化合成苯甲酸酯

首次报道了以固载杂多酸盐TiSiW12O40/TiO2为催化剂,对以丙醇、丁醇、正戊醇、异戊醇和苯甲酸为原料,合成相应苯甲酸酸的反应条件进行了研究。实验表明,TiSiW12O40/TiO2是合成苯甲酸酯的良好催化剂,最佳反应条件为：醇酸摩尔比为4：1,催化剂用量为反应物料总质量的1.5%,反应时间为2.5h。在此条件下,苯甲酸丙酯及苯甲酸正丁酯的产率分别为70.5%及75.6%,苯甲酸戊酯和苯甲酸异戊酯的产率分别达96.7%和83.3%。     

环境友好催化剂TiSiW12O40/TiO2的制备及其催化性能研究

制备了新型固载杂多酸盐TiSiW12O40/TiO2环境友好催化剂,并以丁酸丁酯的合成作为探针反应,系统考察了原料H4SiW12O40@xH2O与TiO2摩尔比、焙烧温度、焙烧时间等制备条件对TiSiW12O40/TiO2催化活性的影响.实验表明:制备催化剂的适宜条件为原料H4SiW12O40@xH2O与TiO2摩尔比为0.47,焙烧温度为350℃,焙烧时间为3.0 h.利用该条件下制备的催化剂TiSiW12O40/TiO2合成丁酸丁酯,正丁醇与正丁酸的投料摩尔比n(醇):n(酸)=1.3:1,催化剂的用量占反应物总投料质量的1.3%,反应时间为1 h,丁酸丁酯的产率为97.2%.该催化剂TiSiW12O40/TiO2用于制备其它丁酸酯类(如乙酯、丙酯、戊酯、异戊酯)时同样取得了好的结果.     

TiSiW12O40/TiO2催化合成己酸异戊酯

报道了以固载杂多酸盐TiSiW12O40/TiO4为多相催化剂，通过己酸和异戊醇反应合成了己酸异戊酯，探讨了TiSiW12O40/TiO4对酯化反应的催化活性，较系统地研究了醇酸摩尔比，催化剂用量，反应时间诸因素对收率的影响，实验表明：TiSiW12O40/TiO4是合成己酸异戊酯的良好催化剂，在n(醇）：n(酸）＝1．6：1，催化剂用量为反应物总质量的1．5％，反应时间45min，使用环己烷为带水剂的适宜条件下，己酸异戊酯的收率可达91．9％。     

TiSiW12O40/TiO2催化合成苹果酯

以固载杂多酸盐TiSiW12O40/TiO2为多相催化剂，通过乙酰乙酸乙酯和乙二醇反应合成了苹果酯，探讨TiSiW12O40/TiO2对缩酮反应的催化活性，较系统地研究了原料量比，催化剂肜量，反应时间诸因素对产品收率的影响，实验表明：TiSiW12O40/TiO2是合成苹果酯的良好催化剂，在n(乙酰乙酸乙酯）：n(乙二醇）＝1：1．5，催化剂用量为反应物料总质量的1．0％，环己烷为带水剂，反应时间50min的优化条件下，苹果酯的收率可达84．1％。     

固载杂多酸盐催化合成苯甲酸正戊酯

首次报道了以固载杂多酸盐TiSiW12 O4 0 /TiO2 为多相催化剂 ,对以苯甲酸和正戊醇为原料合成苯甲酸正戊酯的反应条件进行了研究 .实验表明 :TiSiW12 O4 0 /TiO2 是合成苯甲酸正戊酯的良好催化剂 .最佳反应条件为 :醇酸物质量比为 4∶1,催化剂用量为反应物料总量的 1.5 % ,反应时间为 2 .5h .上述条件下 ,苯甲酸正戊酯的产率可达 96 .7% .     

TiSiW12O40/TiO2催化合成乙酸环己酯

以固载杂多酸TiSiWl2O40／TiO2催化乙酸和环己醇合成了乙酸环己酯。实验确定最佳反应条件为：n(乙酸)：n(环己醇)=1．0：1．1，TiSiW12O40／TiO2用量为乙酸质量的5％，反应时间1．5h，酯化率达95．5％。     

纳米固体酸催化合成无毒增塑剂柠檬酸三辛酯的研究

以柠檬酸和正辛醇为原料,采用自制的纳米固体酸S04^2-／SnO2、SO4^2-／ZrO2、SO4^2-／TiO2及SO4^2-／Fe2O3催化剂合成无毒增塑剂柠檬酸三辛酯（trioctylcitrate,TOC）。分别考察了纳米催化剂种类、催化剂用量、醇／酸物质的量比、反应时间、反应温度等因素对合成TOC反应酯化率的影响,对合成的产品进行红外光谱分析。实验结果表明,自制的固体酸SO4^2-／SnO2催化合成无毒增塑剂柠檬酸三辛酯的最佳反应条件：催化剂用量为1．0g,酸醇比为1：6.3,反应时间1．0h,反应温度190℃。在最佳反应条件下,柠檬酸三辛酯的酯化率可达到98．5％。     

磷钨酸催化合成乙酸戊酯

以磷钨酸为催化剂,冰醋酸和戊醇为原料,催化合成了乙酸戊酯.探讨了催化剂用量、醇酸比、反应时间等对酯化反应的影响.研究结果表明:取冰醋酸40mL,正戊醇25mL,磷钨酸2.0g,反应时间为2h时,酯的产率大于80%.     

铁系固体酸催化剂的制备及催化合成水杨酸酯

制备了铁系固体酸催化剂(Ⅰ)并将其用于催化合成水杨酸酯，优化了反应条件：当Ⅰ用量为投料质量的6．1％，mol酸：mol醇=1：4，适当提高反应温度，合成水杨酸戊酯的反应时间可缩短至3h，产率达91．3％。合成其它水杨酸酯时也取得很高的产率。通过对比，Ⅰ的催化酯化能力优于Fe2O3／SO4^2-固体超强酸催化剂，套用6次后催化性能基本保持不变。     

固载杂多酸SiW_(12)/C催化合成富马酸二甲酯

用自制的固体杂多酸催化剂SiW12 /C进行催化酯化合成富马酸二甲酯 (DMF) .探讨了催化剂用量、醇 /酸比、反应时间、反应温度等动力学条件对合成DMF的影响 .确定了合成DMF的最佳合成工艺条件 :醇 /酸物质的量比为 6∶1,催化剂用量为富马酸质量的 2 .5 % ,反应时间 7.0h ,反应温度为回流温度 ,酯化率可达 90 .6 % .结果表明 ,该催化剂催化活性高 ,可重复使用 ,后处理容易 ,生产成本低且无三废污染 .     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.