波浪引起的海底土层中的应力场和位移场

本文分析了波浪压力引起的海底土层中孔隙水流动的状况,给出了简化的力学模型来描述海底土层中孔隙水流动所引起的应力场和位移场.对波浪的分析采用了线性波的理论假设,波浪引起的压力计算采用高斯分布理论.孔隙流体和土骨架都假设为可压缩的,孔隙水在海底土层中的流动满足达西定律.由表示质量守恒的连续性方程与应力平衡方程出发,得到了由位移所表示的高阶微分方程,并给出了海底土层中位移场和应力场的解.其解依赖于孔隙流体和土骨架的相对压缩性,土的泊桑比和剪切模量,以及土介质的渗透率和各向异性等特性.文章还结合实际情况进行了计算,并分析了上述参数的影响.对如何应用上述结果提出了相应的参考意见.     

关于传递矩阵法分析饱和成层介质响应问题的讨论

水平成层土体的地震响应分析(自由场分析)是地震工程领域地震波散射问题的前提基础,由于饱和多孔方程的复杂性,以往的研究大多集中于干土情形,对于饱和土情形的研究相对较少.而实际工程中,地下水位以下,土体孔隙中充满流体,应考虑饱和多孔介质模型.基于Biot多孔介质模型,考虑饱和土中固液相对运动引起的衰减,采用Thomson--Haskell传递矩阵方法得到了饱和成层土体在地震波入射情形时的稳态反应,经傅里叶反变换,可得到时域暂态反应.通过SV波从基岩入射至上覆饱和土层的数值算例,验证了该方法的有效性.发现和初步阐明了计算中出现的两类违背因果律(即响应先于输入)的现象:(1)当SV波入射角度大于导致基岩中反射P波为非均匀波的临界角时,会使得计算结果违背因果律.因此,当入射角超过临界角时,非均匀波的表示尚需进一步完善;(2)由于P2波的衰减,当与稳态波衰减有关的渗透率、土层厚度、入射波频率等参数导致衰减系数超过计算机表示精度时,会出现结果违背因果律现象,并据此得到了满足因果律的参数范围,该范围可作为实际计算时的一个上界.该工作为采用传递矩阵法分析水平饱和土层自由场响应提供了指导依据,且地下水位以上可采用干土模型,水位以下采用饱和土模型,更符合实际情形.     

P1波入射准饱和土的波型转换问题

针对各向同性准饱和土体中体波的传播问题,本文深入研究了P1波(第一纵波)入射土体时所出现的波型转换现象。在准饱和土波动方程的基础上,通过数值算例,找出标准参数土体模型的临界饱和度及波型转换角,并分析土体孔隙率、渗流系数、水压力和入射波频率等参数对该现象的影响。     

弹性波在准饱和土和弹性土界面的反射与透射

考虑土颗粒和孔隙流体的压缩性,根据准饱和土体的变形连续条件和平衡条件,推导了P1波(快压缩波)、P2波(慢压缩波)和S波的计算公式．根据Snell定理,研究了平面P1波从准饱和土体入射到弹性土层时在界面上的反射和透射,并绘制了反射系数、透射系数和界面应力、位移随入射角的变化曲线,结果表明:饱和度是影响界面效应的一个重要因素,当饱和度低于99％时,反射和透射系数以及应力和位移基本相等,变化不大,但当饱和度为100％时,虽然饱和度比99％提高了1％,但反射和透射系数以及应力和位移值比饱和度为99％时明显降低．     

饱和土–隧道动力响应的2.5维有限元–边界元耦合模型

针对饱和土中异形隧道的三维动力响应问题,建立了2.5维有限元与边界元耦合模型.将隧道结构视为弹性体,采用2.5维有限元建立隧道模型;将地基土视为饱和多孔介质,采用2.5维边界元建立饱和土体模型.借助组合辅助问题基本解消除了边界积分方程的奇异性.利用饱和土与隧道接触面的位移、面力连续和完全透水或完全不透水边界条件,实现2.5维有限元和边界元模型的耦合求解.模型具有计算效率高、适用范围广的优点.通过与完全透水和完全不透水边界条件下轴对称问题的半解析解以及单相介质的2.5维有限元与边界元耦合模型对比,验证了本文模型的正确性.最后利用该模型计算了饱和土体中类矩形隧道在移动载荷作用下的三维动力响应,分析了不同土体渗透性下位移及孔隙水压力沿隧道轴向、环向和深度的分布规律.结果表明:(1)孔隙水压力随土体渗透性增大而显著减小,位移受土体渗透性影响小;(2)位移及孔隙水压力在隧道环向主要分布在距载荷作用点两侧约2 m的范围内;(3)孔隙水压力沿深度的衰减比土体位移快,且孔隙水压力和轴向位移沿深度的分布受土体渗透性影响大.     

饱和土地基在简谐荷载作用下的解析分析

基于多孔介质混合物理论,用解析的方法研究了不可压饱和土地基受到简谐荷载作用下的动力响应问题。利用Fourier积分变换求解耦合方程组,得到了二维饱和土介质在简谐荷载作用下的通解。针对表面透水的具有下卧基岩的饱和土层以及半无限饱和土地基的边界条件,获得了固体骨架位移、孔隙流体位移、固体骨架有效应力以及孔隙流体压力的积分形式解答,并通过数值算例分析了饱和土地基在简谐荷载作用下的响应。     

多孔饱和半空间上弹性圆板垂直振动的积分方程

应用新的方法求解多孔饱和固体的动力基本方程－Ｂｉｏｔ波动方程,首先把Ｂｉｏｔ波动方程化为仅有土骨架位移和孔隙水压力的偏微分方程组,并且逐次解耦方法（不引入位移势函数）求解此偏微分方程组,然后按混合边值条件建立多孔饱和半空间上弹性圆板垂直振动的对偶积分方程,用Ａｂｅｌ变换化对偶积分方程为第二类Ｆｒｅｄｈｏｌｍ积分方程。文中考虑两种孔隙流体的表面边界条件：（ａ）半空间表面（包括圆板与半空间的接触面）是     

一维渗透力与浮力

为简化分析,针对一维渗流问题,研究提出了土力学中渗透力和浮力的两种推导方法,作为传统的宏观尺度孔隙水隔离体法的有益补充.弹性力学平衡微分方程、土力学Terzaghi有效应力方程和流体力学简化Bernoulli方程构成本文分析渗透力和浮力的3个基本方程.在基本方程基础上,容易推导出相应的骨架和孔隙水两种隔离体的平衡微分方程,从而在静力平衡范畴内揭示渗透力和浮力的内涵.单位体积饱和土体的渗透力,源于总水头压力的梯度,而浮力则源于位置水头压力在竖向的梯度,这两者统一于骨架或孔隙水的平衡微分方程.实际工程关注的有效应力计算问题,一般可以直接应用3个基本方程来确定;只有在简化条件下可按渗透力和浮力计算土体中有效应力分布规律.还讨论了若干研究热点问题,重点探讨了当前一种渗透力新定义j=nγ_wi在形式上的合理性以及在实际应用中可能存在的风险,并验证了一维渗透力的一种经典精细化表述结果中考虑渗流速度时间导数的严谨性.在土力学渗透力和浮力问题研究中应重视和正确应用Terzaghi有效应力方程.     

饱和土和衬砌相互作用的圆形隧洞动力特性

利用 Darcy 渗透定律,通过引入衬砌和土体的相对渗透系数,建立了隧洞边界部分透水条件。将土骨架视为具有分数导数粘弹性本构关系的粘弹性体,基于 Biot 理论,通过界面连续性条件在频率域内给出了简谐轴对称荷载或流体压力作用下饱和粘弹性土-弹性衬砌系统耦合振动时饱和土、衬砌的位移、应力、孔隙水压力表达式,并通过算例分别考察了简谐轴对称荷载、流体压力作用下的分数导数阶数、材料参数比、渗透系数对系统的径向位移幅值 U 、孔隙水压力幅值P 的影响,结果表明：随着分数导数阶数和材料参数比的增加,系统的响应幅值逐渐减小;随着渗透系数κ的增加,轴对称荷载作用下的土体位移幅值和孔隙水压力幅值逐渐减小,当κ大于100时,U 和 P 值无明显变化,流体压力作用下的土体位移幅值和孔隙水压力幅值逐渐增大,当κ大于1时, U 和 P 值无明显变化。     

水饱和岩石中爆炸应力波传播的数值模拟

基于连续介质力学和不相融混合物理论,假定组分间无相对运动,采用B-W-N-B有效应力准则,在屈服面中引入孔隙影响因子,提出了一种多孔含水介质流固耦合的本构模型,并给出了孔隙的演化方程,对水饱和凝灰岩介质中的爆炸应力波传播作了数值模拟。数值计算给出的应力波形与实测结果有良好的一致性。采用本文中所述流固耦合本构模型,可很好地预测水饱和岩石中爆炸波的演化规律。     

The 7th International Conference on Fluid Mechanics May 24-27,2015,Qingdao,China

正http://www.icfm7.org First Announcement and Call for PapersThe objective of International Conference on Fluid Mechanics(ICFM)is to provide a forum for researchers to exchange new ideas and recent advances in the fields of theoretical,experimental,computational Fluid Mechanics as well as interdisciplinary subjects.It was successfully convened by the Chinese Society of Theoretical and Applied Mechanics(CSTAM)in Beijing(1987,     

INFORMATION FOR CONTRIBUTORS

Contributions： The Journal, Acta Mechanica Solida Sinica, is pleased to receive papers from engineers and scientists working in various aspects of solid mechanics. All contributions are subject to critical review prior to acceptance and publication.     

基于鲁棒滤波的捷联导引头视线角速度估计方法

针对捷联导引头无法直接获取视线角速度等信息的问题,研究了鲁棒滤波在大气层外飞行器捷联导引头视线角速度估计中的应用。为了建立非线性滤波估计模型,考虑目标视线角速度的慢变特性,采用一阶马尔科夫模型建立了状态方程;推导了视线角速度的解耦模型,并建立了量测方程;考虑到实际应用中存在系统噪声统计特性失准的问题,基于Huber-Based鲁棒滤波方法,设计了视线角速度滤波器,并完成了基于Huber-Based滤波方法和扩展卡尔曼滤波方法的数学仿真。仿真结果表明Huber-Based滤波方法的视线角、视线角速度及视线角加速度估计精度分别达到0.1140'、0.1423'/s、0.0203'/s2,而扩展卡尔曼滤波方法的视线角、视线角速度及视线角加速度估计精度仅分别为0.6577'、0.6415'/s、0.0979'/s~2。仿真结果证明了该方法可以有效地估计出相对视线角速度等信息,并且在非高斯噪声的条件下,依然可获得较高的估计精度,具有一定的鲁棒性。     

Guide for authors

正Each of the sections below provides essential information for authors.We recommend that you take the time to read them before submitting a contribution to Acta Mechanica Sinica.We hope our guide to authors may help you navigate to the appropriate section.How to prepare a submission This document provides an outline of the editorial process involved in publishing a scientific paper in Acta Mechanica     

Use specification of multiscale materials for life spanned over macro-, micro-, nano-, and pico-scale

Multiscale material intends to enhance the strength and life of mechanical systems by matching the transmitted spatiotemporal energy distribution to the constituents at the different scale, say—macro, micro, nano, and pico,—, depending on the needs. Lower scale entities are, particularly, critical to small size systems. Large structures are less sensitive to microscopic effects. Scale shifting laws will be developed for relating test data from nano-, micro-, and macro-specimens. The benefit of reinforcement at the lower scale constituents needs to be justified at the macroscopic scale. Filling the void and space in regions of high energy density is considered.Material inhomogeneity interacts with specimen size. Their combined effect is non-equilibrium. Energy exchange between the environment and specimen becomes increasingly more significant as the specimen size is reduced. Perturbation of the operational conditions can further aggravate the situation. Scale transitional functions and/or f_j/j+1 are introduced to quantify these characteristics. They are represented, respectively, by , and (f_mi/ma,f_na/mi,f_pi/na). The abbreviations pi, na, mi, and ma refer to pico, nano, micro and macro.Local damage is assumed to initiate at a small scale, grows to a larger scale, and terminate at an even larger scale. The mechanism of energy absorption and dissipation will be introduced to develop a consistent book keeping system. Compaction of mass density for constituents of size 10⁻¹², 10⁻⁹, 10⁻⁶, 10⁻³ m, will be considered. Energy dissipation at all scales must be accounted for. Dissipations at the smaller scale must not only be included but they must abide by the same physical and mathematical interpretation, in order to avoid inconsistencies when making connections with those at the larger scale where dissipations are eminent.Three fundamental Problems I, II, and III are stated. They correspond to the commonly used service conditions. Reference is made to a Representative Tip (RT), the location where energy absorption and dissipation takes place. The RT can be a crack tip or a particle. At the larger size scales, RT can refer to a region. Scale shifting of results from the very small to the very large is needed to identify the benefit of using multiscale materials.     

Impact non-pénétrant sur le thorax : influence de la courbure sur la propagation des ondesNonpenetrating impact on the thorax: influence of curvature on wave propagation

Theoretical studies of the propagation of impact waves through the thorax are needed to improve the design of bulletproof jackets and blast protections (Fung in ‘Biomechanics Motions, Flow, Stress, and Growth’, Springer-Verlag, 1990; Cooper et al., J. Trauma 40 (1996) S38–S41). The influence of the weak acoustic coupling at the interface between the thoracic wall and the lung were described in (Grimal et al., C. R. Acad. Sci. IIB 329 (2001) 655–662); in this work, we study, within the frame of elastodynamics and with an approximate analytical method, the effects of the curvature of this interface. Results are given in terms of strain energy for the pressure wave, transmitted or converted. Focalisation of energy in the medium representing the lung is important for curvatures measured in humans. To cite this article: Q. Grimal et al., C. R. Mecanique 330 (2002) 569–574.     

Vérification expérimentale de la relation de réciprocité d'Onsager pour l'électro-osmose et l'électro-filtration dans une argile naturelleExperimental verification of the Onsager's reciprocal relations for electro-osmosis and electro-filtration phenomena on a saturated clay

This Note is devoted to the experimental verification of the Onsager's reciprocal relations in the particular case of electro-osmosis and electro-filtration. A special set up has been designed to carry out the measurements of both the electro-osmotic permeability and the streaming potential. This has been performed by using a natural material i.e., saturated kaolinite. To cite this article: K. Beddiar et al., C. R. Mecanique 330 (2002) 893–898.