溶胶-凝胶方法制备ZnO:Al薄膜及其制备工艺条件研究

采用Sol-Gel工艺在玻璃基片上制备出C轴择优取向性、高可见光透过率以及高电导率的Al³⁺离子掺杂的ZnO透明导电薄膜ZnO:Al(ZAO薄膜).并研究了退火温度、Al掺杂量等对其光电性能的影响.结果表明,溶胶-凝胶法制备ZAO薄膜的最佳工艺条件为:溶胶浓度0.75 mol/L、掺杂量1.5 atm%,镀膜层数10层(厚度约为136 nm)、退火温度600℃.     

SnS薄膜的两步法制备及其光电性能研究

用两步法制备了SnS薄膜,首先在玻璃衬底上用磁控溅射法沉积一层Sn薄膜,然后在220℃下加热炉中硫化60 min.对该薄膜进行结构、表面形貌和光电性能分析,结果表明:制备的SnS薄膜为p型导电,有明显的(040)方向择优取向;薄膜表面致密,S和Sn原子非常接近化学计量比;薄膜呈现高于5×10⁴ cm^-1的吸收系数和持续光电导效应,其直接带隙约为1.23 eV,适合作为太阳能电池的吸收层材料和用于制作光敏器件.     

电化学沉积CdSe纳晶薄膜的性能及沉积机理

电化学沉积是半导体薄膜制备的一种简便方法,常用于Ⅱ-族化合物半导体薄膜的制备.通过电沉积条件的适当改变可成功地在导电衬底上制备半导体纳晶薄膜^[1].CdSe薄膜作为一种透光性好、导电性好的半导体材料,可进行光学性能和光电性能方面的研究,而半导体纳晶多孔电极的光电化学特性与体材料之间有很大不同.本文采用电化学沉积法制备了CdSe纳晶薄膜并研究了其性能,通过扫描隧道显微镜(STM)形貌分形分析进一步研究其沉积机理.     

Ga对在AlN衬底上直接生长石墨烯的远程催化

通过镓(Ga)远程催化,采用化学气相沉积(CVD)方法在氮化铝(AlN)衬底上直接生长石墨烯薄膜.研究了生长温度、催化剂距离对石墨烯生长及其光学性质和电学性质的影响规律.结果表明,在生长温度1070℃下可以制备厚度约为5层的石墨烯薄膜, Ga周围1.4 cm范围内可以得到厚度均匀的石墨烯薄膜.通过透光率和方阻表征了石墨烯的光学和电学性质,结果表明, 400～800 nm波长范围内石墨烯薄膜透光率可达90%以上,方阻约为230Ω/.第一性原理计算结果表明,石墨烯仍保持金属性, AlN衬底对石墨烯有吸附掺杂作用,可有效降低石墨烯的方阻,改善石墨烯和衬底的电学接触.     

溶剂热法制备铝掺杂的氧化锌透明导电薄膜

采用溶剂热法在玻璃基片上沉积铝掺杂的氧化锌透明导电膜(AZO)。研究了前驱溶液中Al3+与Zn2+的物质的量的比nAl3+/nZn2+、溶剂热反应温度和反应时间对薄膜物相、形貌、可见光透过率和电阻率的影响。结果表明,溶剂热法所制备的AZO薄膜具有六方纤锌矿结构,Al3+不仅改善薄膜的导电性而且起矿化剂的作用促进薄膜生长,溶剂热反应时间的增加没有使薄膜显著增厚。采用溶剂热法可制备出可见光平均透过率大于80%、方块电阻小于500Ω的AZO薄膜。     

制备条件对铝掺杂氧化锌(AZO)薄膜结构和电学性质的影响

本文利用溶胶-凝胶法在玻璃基底上制备得到了AZO透明导电薄膜,就两种不同的热处理-退火方式对薄膜的结构与性质的影响做了比较,研究了掺杂浓度、退火温度对薄膜结构及性质的影响规律.结果表明,高温、分层退火、铝掺杂均有利于生成结晶度高、具有C轴优先取向的AZO薄膜;高温和分层退火有利于晶粒长大,相反铝掺杂却有碍晶粒长大;薄膜的电学性质随退火温度和铝掺杂量的变化呈现规律的变化.通过分析AZO薄膜内的晶体生长过程,本文认为主要是制备条件和AZO晶体的晶面习性导致了薄膜的结晶度、晶体生长取向性和晶粒尺寸等方面的差异.     

沉积温度对Cu_2O薄膜生长过程及光电性能的影响(英文)

以硫酸铜为铜源,采用一步化学浴沉积法制备出了晶粒尺寸可调的纳米晶Cu2O薄膜。通过X射线衍射、扫描电镜和紫外可见分光光度法研究了沉积温度对薄膜晶体结构、成核密度、晶粒尺寸、薄膜厚度和光电性能的影响。结果表明,当在60~90℃范围内调节温度时,能够很好地控制晶粒尺寸、薄膜厚度,并将禁带宽度控制在33~51 nm、392~556 nm和2.47~2.61 eV范围内;随着晶粒尺寸的减小,紫外可见光谱的吸收边有明显的蓝移。此外还对薄膜的生长过程,成核密度和颗粒尺寸变化的机理进行了讨论。     

CuInS2纳米纸阵列薄膜的制备及生长机理

采用溶剂热合成技术,以氯化铜、硝酸铟和硫脲为反应物,十六烷基三甲基溴化铵(CTAB)为阳离子表面活性剂,草酸为还原剂,无水乙醇为溶剂,直接在掺氟的SnO2透明导电玻璃(FTO)衬底上合成CuInS2(CIS)薄膜.采用扫描电子显微镜(SEM)、高分辨率透射电子显微镜(HRTEM)、X射线衍射(XRD)、拉曼光谱、能量色散谱(EDS)、紫外-可见(UV-Vis)反射光谱和透射光谱对样品的形貌、结构、成分和光学性能进行分析.结果表明,在适当的反应物浓度下,在FTO衬底上形成了垂直衬底生长的、具有良好结晶性能的黄铜矿结构的CIS纳米纸阵列薄膜.CIS薄膜中Cu,In,S的原子比为1.1∶1∶2.09,在紫外-可见和近红外波段具有良好的光吸收特性,禁带宽度约1.51 eV.结合不同反应时间制备的CIS薄膜的形貌、结构和成分分析,讨论了CIS纳米纸阵列薄膜的生长机理.     

Bi2MoO6纳米薄膜的制备及其光电性能

采用非晶态配合物法在ITO导电玻璃上制备了Bi2MoO6薄膜. 采用扫描电子显微镜(SEM)、X射线衍射(XRD)、激光拉曼光谱(LRS)、紫外-可见漫反射谱(DRS)、光电流响应谱、光电转换量子效率(IPCE)等技术研究了Bi2MoO6薄膜的制备工艺、形貌、结构与薄膜光电性能的关系. 结果表明, 500 ℃、1 h焙烧后的Bi2MoO6薄膜为γ-Bi2MoO6晶相, 沿(131)晶面方向生长, 薄膜厚度约为69 nm. 随着焙烧温度的升高和焙烧时间的延长, Bi2MoO6薄膜的平均颗粒度增大, 并且在525 ℃焙烧出现β-Bi2MoO6和γ’-Bi2MoO6晶相. Bi2MoO6薄膜具有可见光响应活性, 在可见光照射下可以产生光电流, 优化条件下的Bi2MoO6薄膜在400 nm的光电转换量子效率可以达到2.14%. 薄膜的光电响应和光电转换量子效率受薄膜形貌及结晶状态影响, 可以通过控制薄膜的制备条件来提高薄膜的光电转换量子效率.     

纯相Li_2MnO_3薄膜的制备及作为锂离子电池正极材料的电化学行为

采用固相烧结法制备了纯相Li2MnO3正极材料及靶材,采用脉冲激光沉积(PLD)法在氧气气氛、不同温度下沉积了Li2MnO3薄膜.通过X射线衍射(XRD)和拉曼(Raman)光谱表征了薄膜的晶体结构,采用扫描电镜(SEM)观察薄膜形貌及厚度,利用电化学手段测试了Li2MnO3薄膜作为锂离子电池正极材料性能.结果表明,PLD方法制备的纯相Li2MnO3薄膜随着沉积温度升高薄膜结晶性变好.25℃沉积的薄膜难以可逆充放电,400℃沉积的薄膜具有较高的电化学活性和循环稳定性.相对于粉末材料,400与600℃制备的Li2MnO3薄膜电极平均放电电位随着循环次数的衰减速率明显低于相应的粉体材料.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.