Mechanistic aspects of oxidation of dextrose by N-bromophthalimide in acidic medium: a micellar kinetic study

Kinetic investigations of oxidation of dextrose by N-bromophthalimide (NBP) in acidic medium in the presence of mercuric(II) acetate as a scavenger have been studied. In both the absence and presence of surfactants, the oxidation kinetics of dextrose by NBP shows a first-order dependence on NBP, fractional order on dextrose, and negative fractional order dependence on sulfuric acid. The determined stoichiometric ratio was 1:1 (dextrose:NBP). The variation of Hg(OAC)₂ and phthalimide (reaction product) have an insignificant effect on reaction rate. Effects of surfactants, added acrylonitrile, added salts, and solvent composition variation have been studied. Activation parameters for the reaction have been evaluated from Arrhenius plot by studying the reaction at different temperature. The rate law has been derived on the basis of obtained data. A plausible mechanism has been proposed from the results of kinetic studies, reaction stoichiometry and product analysis. The role of anionic and non-ionic micelle was best explained by the Berezin’s model.     

Spectrofluorimetric kinetic determination of selenium (IV) by flow injection analysis in cationic micellar medium

A sensitive catalytic kinetic spectrofluorimetric method for determining ng ml(-1) of selenium by flow injection analysis has been developed. The method, based on the catalytic effect of Se (IV) on the reduction of resorufin by sulphide, in the presence of cetylpyridinium chloride, is monitored spectrofluorimetrically (lambda(ex)=480 nm; lambda(em)=583 nm). The linearity range of the calibration graph is dependent on the concentration of sulphide. The variables affecting the rate of the reaction were investigated. The method is simple, rapid, precise, sensitive, and widely applicable. The limit of detection is 1 ng ml(-1) Se (IV), and the calibration range is 5-1000 ng ml(-1). Sampling rate is 60 samples h(-1), and the relative standard deviation of 12 determinations of 100 ng ml(-1) Se was 0.76%. The determination of Se (IV) in the presence of Se (VI) and total selenium is described. The method was applied to the determination of Se in selenium tablets, and several synthetic samples.     

Location effects upon the kinetic behaviour of benzophenones in micellar solution

The triplet lifetimes of a series of substituted benzophenones in SDS micellar solution are controlled by the availability of hydrogen atoms from the surfactant. A specific effect of the micellar environment is pointed out and rationalized by the introduction of a location parameter.     

Flow-injection spectrophotometric determination of arylamines and sulphonamides by diazotization and coupling in a micellar medium

In a sodium dodecyl sulphate (SDS) micellar solution, the rate of coupling of a diazonium ion with N-(1- naphthyl)ethylenediamine (NED) increases greatly, the protonation of the resulting azo dyes takes place at higher pH values and the dyes are more soluble. These favourable features were applied to the development of a simple flow-injection spectrophotometric procedure for the determination of diazotizable substances of pharmaceutical interest. Limits of detection in the range 0.2–0.5 μg ml^?1 (signal-to-noise ratio=3), with relative standard deviation of 0.7–3% (n=3) for 5 μg ml^?1 standards, were obtained.     

Concentration and determination of cotinine in serum by cation-selective exhaustive injection and sweeping micellar electrokinetic chromatography

Micellar electrokinetic chromatography (MEKC), combined with on-line concentration techniques, cation-selective exhaustive injection (CSEI) and sweeping, was developed for the analysis of cotinine, the primary biomarker for exposure to secondhand smoke. Experimental parameters including sample matrix, surfactant concentration, injection length and concentration of high-conductivity buffer, and sample electrokinetic injection time were optimized for electrophoretic enrichment and separation processes. Under the optimal conditions, the detection sensitivity of cotinine was enhanced by about 5000-fold using CSEI-sweeping MEKC compared to normal MEKC. The limit of detection for cotinine was found to be 0.2 ng/mL using ultraviolet absorbance detection. Furthermore, the developed method was successfully applied to the detection of cotinine in mouse serum samples.     

Determination of zinc by flow injection with fluorimetric detection in a micellar medium

A room-temperature flow injection spectrofluorimetric method is presented for the determination of Zn(II), based on the use of salicylaldehyde thiocarbohydrazone in the presence of Triton X-100 and sodium acetate-acetic acid buffer. Various physical and chemical variables affecting the reaction in the flow system were evaluated. The proposed method is very selective. The calibration graph is linear over the range 10-1000 ng/ml, with a detection limit of 5 ng/ml and a relative standard deviation at the 50 ng/ml level of 1.8 %. The method was successfully applied to the determination of Zn(II) in drinking waters and biological samples.     

Determination of zinc by flow injection with fluorimetric detection in a micellar medium

A room-temperature flow injection spectrofluorimetric method is presented for the determination of Zn(II), based on the use of salicylaldehyde thiocarbohydrazone in the presence of Triton X-100 and sodium acetate-acetic acid buffer. Various physical and chemical variables affecting the reaction in the flow system were evaluated. The proposed method is very selective. The calibration graph is linear over the range 10–1000 ng/ml, with a detection limit of 5 ng/ml and a relative standard deviation at the 50 ng/ml level of 1.8 %. The method was successfully applied to the determination of Zn(II) in drinking waters and biological samples.     

Thermally induced phase transitions and morphological changes in organoclays

Thermal transitions and morphological changes in Cloisite organoclays were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, and in situ simultaneous small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) over the temperature range of 30-260 degrees C. On the basis of DSC and FTIR results, the surfactant component in organoclays was found to undergo a melting-like order-disorder transition between 35 and 50 degrees C. The transition temperatures of the DSC peaks (Ttr) in the organoclays varied slightly with the surfactant content; however, they were significantly lower than the melting temperature of the free surfactant (dimethyldihydrotallowammonium chloride; Tm = 70 degrees C). FTIR results indicated that within the vicinity of Ttr, the gauche content increased significantly in the conformation of surfactant molecules, while WAXD results did not show any change in three-dimensional ordering. Multiple scattering peaks were observed in SAXS profiles. In the SAXS data acquired below Ttr, the second scattering peak was found to occur at an angle lower than twice that of the first peak position (i.e., nonequidistant scattering maxima). In the data acquired above Ttr, the second peak was found to shift toward the equidistant position (the most drastic shift was seen in the system with the highest surfactant content). Using a novel SAXS modeling technique, we suggest that the appearance of nonequidistant SAXS maxima could result from a bimodal layer thickness distribution of the organic layers in organoclays. The occurrence of the equidistant scattering profile above Ttr could be explained by the conversion of the bimodal distribution to the unimodal distribution, indicating a redistribution of the surfactant that is nonbounded to the clay surface. At temperatures above 190 degrees C, the scattering maxima gradually broadened and became nonequidistant again but having the second peak shifted toward a scattering angle higher than twice the first peak position. The changes in SAXS patterns above 190 degrees C could be attributed to the collapse of organic layers due to desorption and/or degradation of surfactant component, which was supported by the TGA data.     

Indirect simultaneous kinetic determination of semicarbazide and hydrazine in micellar media by H-point standard addition method

H-point standard addition method (HPSAM) is suggested as a simple and selective method for the determination of semicarbazide and hydrazine. The reduction of Cu²⁺ to Cu⁺ by semicarbazide and hydrazine in the presence of neocuproine (Nc) and the subsequent complex formation between Cu⁺ and Nc produced a sensitive spectrophotometric method for indirect determination of semicarbazide and hydrazine. The difference in the rate of reduction of Cu²⁺ with semicarbazide and hydrazine in cationic micellar media is the basis of this method. Semicarbazide can be determined in the range of 0.5-3.75 μg ml⁻¹ with satisfactory accuracy and precision in the presence of excess hydrazine. The proposed method was successfully applied to the simultaneous determination of semicarbazide (0.5-3.75 μg ml⁻¹) and hydrazine (0.5-5 μg ml⁻¹) and also to the selective determination of semicarbazide in the presence of hydrazine in several synthetic mixtures containing different concentration ratios of semicarbazide and hydrazine.     

Kinetic- and catalytic-spectrophotometric determination of iron by pyrogallolphthalein and potassium perdisulphate in non-ionic surfactant micellar medium

Summary A simple and highly sensitive spectrophotometric determination of iron with pyrogallolphthalein in a micellar medium of non-ionic surfactant is proposed. This method is based on the kinetic-catalytic action of iron(III) upon the decomposition reaction between pyrogallolphthalein and potassium perdisulphate at pH 2.4–2.9 in the presence of Triton X 100 as a non-ionic surfactant. The calibration graph is linear over the range 10–600 ng iron(III) per 10 ml in spectrophotometry (apparent molar absorption coefficient for decomposition was 1.25×10^–6 l per mole per cm at 385 nm). The method was applied to assay and recovery tests for artificial waste water with satisfactory results (recovery 97.6%–103.5%).

---

Kinetische und katalytisch-spektralphotometrische Eisenbestimmung mit Hilfe von Pyrogallolphthalein und Kaliumperdisulfat in Gegenwart eines nichtionischen Tensids

---

Application of xanthene derivatives in analytical chemistry. Part LXXV. Part LXXIV see ref. [1]     

ESR lineshapes and kinetic behavior of nitroxide spin probes in micellar solutions

The ESR spectrum of the nitroxide radical 2,2,6,6-tetramethylpiperidine-N-oxide (TEMPO) has been investigated in aqueous solutions of the following surfactants:n-octylammonium bromide, sodiumn-octylsulfonate,n-decylammonium bromide,n-docecyltrimethylammonium bromide, and sodiumn-dodecylsulfate. The spectra were recorded at 25° C as function of surfactant concentration in the ranges 0–0.5m for the C₁₀ and C₁₂ compounds and 0–1.0m for the others. Analysis of the spectra using computer simulation methods yields the hyperfine coupling constanta _H and the widthW _H of the partially resolved lines in the proton hyperfine structure. Changes in these variables with surfactant concentration are interpreted from medium effects on the magnetic properties of the radical, kinetics of radical-micelle interactions, and rotational dynamics of the nitroxide probe in these solutions.     

Kinetic and mechanism study of the oxidative decolorization of neutral red by bromate in micellar medium

The kinetics of the oxidation of neutral red by bromate was investigated in the presence of cationic surfactant (N-dodecylpyridinium chloride) and strongly acidic media over the temperature range 22-35 °C. The kinetic studies were carried out as a function of different variables like concentration and temperature. The described reaction rate is greatly catalyzed by the presence of trace amount of Fe(II) ions and followed by pseudo-third-order kinetics with respect to dye concentration. A possible mechanism for the catalyzed reaction is offered which is found to be coincidentally congruent with experimental findings. The derived rate equation is in good agreement with the experimental observations. Thermodynamic parameters were also evaluated.     

Thermodynamic and kinetic theory of ionic micellar systems: 2. Statistical-thermodynamic relations

The role of electrochemical potentials in the grand canonical ensemble of ionic micellar systems is characterized. The notion of relative electrochemical potentials is introduced with allowance for the electroneutrality condition. Fundamental relations and primary statistical-thermodynamic relations are derived for ideal and real ionic micellar systems with participation of electrochemical potentials, in which inaccuracies observed in published literature, are eliminated. A differential equation for the osmotic pressure of ionic aggregated system is obtained. Relations that link the work of the aggregation of ionic micelle with chemical and electrochemical potentials and aggregation numbers are established. Separate contributions to the work of aggregation are commented on.     

Compositional heterogeneity effects in multisticker associative polyelectrolytes prepared by micellar polymerization

An aqueous micellar radical polymerization technique has been used to prepare water‐soluble polyelectrolytes of acrylamide (AM) and sodium 2‐acrylamido‐2‐methylpropanesulfonate (NaAMPS) hydrophobically modified with low amounts (2–4 mol %) of N,N‐dihexylacrylamide (DiHexAM). This synthesis method leads to multisticker polymers, in which the number and length of the hydrophobic blocks vary with the degree of conversion. Kinetic studies show an appreciable compositional heterogeneity for these polymers, in contrast to their neutral analogues (i.e., AM/DiHexAM copolymers). The drift in composition observed for the AM/NaAMPS/DiHexAM terpolymers is attributed to the electrostatic repulsion between the negatively charged growing polymeric chains, located in the aqueous continuous medium, and the anionic sodium dodecyl sulfate micelles, inside of which the hydrophobic monomer is entrapped. It is shown that an optimization of the polymerization process can be achieved, which gives terpolymers of homogeneous and well‐defined compositions. The thickening ability of the hydrophobically modified polyelectrolytes is directly affected by the extent of their compositional heterogeneity: an increase in the sample homogeneity leads to a significant viscosity enhancement and marked elastic properties of the polymer solutions. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3261–3274, 2003     

Micellar medium effects on the hydrolysis of phenyl chloroformate in ionic,zwitterionic, nonionic,and mixed micellar solutions

The spontaneous hydrolysis of phenyl chloroformate was studied in various anionic, nonionic, zwitterionic, and cationic aqueous micellar solutions, as well as in mixed anionic–nonionic micellar solutions. In all cases, an increase in the surfactant concentration results in a decrease in the reaction rate and micellar effects were quantitatively explained in terms of distribution of the substrate between water and micelles and the first‐order rate constants in the aqueous and micellar pseudophases. A comparison of the kinetic data in nonionic micellar solutions to those in anionic and zwiterionic micellar solutions makes clear that charge effects of micelles is not the only factor responsible for the variations in the reaction rate. Depletion of water in the interfacial region and its different characteristics as compared to bulk water, the presence of high ionic concentration in the Stern layer of ionic micelles, and differences in the stabilization of the initial state and the transition state by hydrophobic interactions with surfactant tails can also influence reactivity. The different deceleration of the reaction observed in the various micellar solutions studied was discussed by considering these factors. Synergism in mixed‐micellar solutions is shown through the kinetic data obtained in these media. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 445–451, 2002     

All-atom molecular dynamics analysis of kinetic and structural properties of ionic micellar solutions

All-atom molecular dynamics simulation results regarding aqueous sodium dodecyl sulfate (SDS) solutions have been presented. Both salt-free solutions with different SDS concentrations and those containing calcium chloride additives have been studied. The simulation has shown that surface-active SDS ions form stable premicellar aggregates. The obtained molecular dynamics trajectories have been used to describe both the kinetic and structural properties of solutions containing SDS molecular aggregates and the properties of individual aggregates. Aggregation kinetics has been investigated, and the characteristic sizes of the aggregates have been calculated by different methods. It has been found that the size of a premicellar aggregate with aggregation number n = 16 in a salt-free solution virtually does not depend on surfactant concentration. Radial distribution functions (RDFs) of hydrogen and oxygen atoms of water molecules relative to the center of mass of an aggregate have no local maxima near the aggregate surface; i.e., the surface is incompletely wetted with water. Corresponding RDFs of carbon atoms have one, two or three maxima depending on the surfactant concentration and the serial number of a carbon atom in the hydrocarbon radical of the surface- active ion. The study of the potentials of mean force for the interaction of sodium and calcium ions with an aggregate having aggregation number n = 32 shows that only calcium ions can be strongly bound to such an aggregate.