高固含量聚合物乳液流变性研究进展

近二十多年来,如何提高乳胶产品固含量一直是乳液制备工作所追求的重要目标之一。相对于传统乳液而言,高固含量具有更大的分散相体积分数,甚至达到70%(wt)以上。因此,高分散相体积分数状态下的流变性能一直成为高固含量乳液制备过程中的瓶颈。粒子尺寸及其分布在粘度控制过程中起着至关重要的作用。本文从单分散体系、多元分散体系和宽粒径分布体系三个方面,详细评述了近几年高固含量乳液流变研究领域的数学建模和实验研究。并对高固含量乳液流变性能研究的发展进行了展望。     

High solids content latexes with low viscosity

The effect of particle size distribution (PSD) on the solids content and viscosity of the multi-sized latex was investigated by blending mono-sized latexes and measuring their rheological properties. The results showed that the maximum packing (highest solids content) was observed at a weight fraction 80% of large particles with respect to total solids content for both bi-modal and tri-modal latexes, and the lowest viscosity was obtained when the ratio of large to medium to small particles was approximately 80/10/10 (by weight). A two-stage technique to prepare high solids multi-sized polymer latex was developed by using a polymer latex previously made as seed and by adding small amount of additional surfactants and/or second group of polymer particles. The PSD of the latex was optimized by varying the amount of the seed, the additional surfactants, and the second group of particles. Film forming latexes with high solids (>65%) and low viscosity were obtained. Received: 18 February 2000 Accepted: 30 September 2000     

Preparation and properties of a thermo-sensitive latex film

Polymer particles with hydrophobic core and hydrophilic shell were prepared via a three-step method. First, poly(butyl methacrylate-co-methyl methacrylate) (p-(BMA-MMA)) latex was prepared through emulsion polymerization. Then, a shell of poly(glycidyl methacrylate) (p-GMA) was introduced around the p-(BMA-MMA) particles by using a redox initiation system under kinetically controlled conditions. Finally, part of the epoxy groups existing in the shell were converted into quaternary ammonium salts, resulting in an ionic hydrophilic shell. The core-shell particles could be redispersed in water to form a stable emulsion. The contact angle of the core-shell latex film with water was around 16° at 25 °C, which became larger than 90° after the film was heated at 150 °C for a short period of time. This showed that the latex film was completely switched from hydrophilicity to hydrophobicity by the action of heat. Additionally, the latex film before heat treatment could be easily washed away from the substrate with neutral water, but it could no longer be removed after the heat treatment. When an IR dye with the maximum absorption at 830 nm was incorporated into the film, it became sensitive to LD laser emitting at 830 nm and gave negative image after exposed by LD laser and developed with neutral water. This showed that the latex film might find uses in chemical-free thermal laser imaging applications.     

高固含量低粘度P(MMA/BA/AA)乳液的制备及性能研究

先利用半连续种子乳液聚合法制备固含量为50%,粒径480nm的单分散甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)与丙烯酸(AA)的共聚物种子乳液;然后以上述种子乳液为介质,十二烷基硫酸钠为乳化剂,碳酸氢钠为缓冲剂,过硫酸铵为引发剂制备固含量72%,乳胶粒具有二元分布特征的高固含量、低粘度稳定乳液:其中大乳胶粒径500～600nm,小乳胶粒径约80nm.所得乳液中乳化剂总含量为聚合物质量的2.1%;粘度在剪切速率为21s-1时为400mPa·s.另外,相对于常规乳液,所制备高固含量乳液胶膜具有更好的光泽度.     

盐酸依匹斯汀PVC膜电极的研制及应用

以四苯硼酸钠与盐酸依匹斯汀生成的离子缔合物为电活性物质,研制了盐酸依匹斯汀PVC膜选择性电极。在pH 5的HCl-NaOH溶液中,电极的线性范围为6.3×10-7~1.0×10-1mol/L,斜率为49 mV/pC(10℃),检出限为1.89×10-7mol/L。应用此电极测定药物中盐酸依匹斯汀含量,RSD3%,回收率为97.5%~100.2%。     

高比表面积VPO催化剂的制备及其性质研究

利用有机相制备VPO催化剂,在制备过程中加入聚乙二醇(PEG)作为分散剂可有效提高VPO催化剂的比表面积。实验中采用两种不同分子量的聚乙二醇(PEG 6000和PEG 10000),所得VPO催化剂的比表面积分别为52与54m²/g,而不加聚乙二醇的VPO催化剂其比表面积仅为19m²/g.XRD,XPS及FTIR的结果表明,催化剂的主要晶相均为(VO)₂P₂O₇,但两类催化剂的微观结构有所不同。正丁烷选择氧化生成马来酐的催化反应结果表明,385℃时加聚乙二醇制备的VPO催化剂其丁烷的转化率为84%～86%.马来酸酐的选择性为78%,而不加聚乙二醇制备的VPO催化剂其转化率和选择性均为71%.     

高层间距氧化铝柱层状钛酸盐的制备和表征

层往化合物因其具有独特的大分子吸附和催化等性能而受到人们的高度重视．至今，人们对层柱粘土和四价金属磷酸盐的制备和表征已作了比较详细和深入的研究k一句，但对一系列以八面体骨架结构为基；出的层状金属氧化物的“插x化学”（intercalationcheAnstry）的研究相对较少，且大部分。作都局限在用有机胺来支撑此类层状金属氧化物［‘－’］由于层间的有机物不耐高温，此类层柱材料在各方面（尤其是催化方面）的应用就受到了很大的限制．合成高热稳定性和大层间距的层柱金属氧化物一直是该领域的研究重。点之一．同层状粘土不同，这类层…     

New routes to high solid content latexes: a process for in situ particle nucleation and growth

A means of generating latices with solid contents well over 70% (v/v) without the use of intermediate seeds is proposed. It is demonstrated that the use of an electrically neutral initiation system (hydrogen peroxide) in the initial stages of the process, followed by an initiator yielding negatively charged free radicals (ammonium persulphate) changes the way in which the system generates stable particles. The reason for this change is the need to avoid stabilising small, homogeneously nucleated particles during the first portion of the process, and the desire to generate controlled quantities of them during the second portion. The processes are highly reproducible, as are the particle size distributions and rheological properties of the final latices.     

石墨烯纤维：制备、性能与应用

石墨烯纤维是一种由石墨烯片层紧密有序排列而成的一维宏观组装材料。通过合理的结构设计和可控制备,石墨烯纤维能够将石墨烯在微观尺度的优异性能有效传递至宏观尺度,展现出优异的力学、电学、热学等性能,从而应用于功能织物、传感、能源等领域。目前,石墨烯纤维主要通过湿法纺丝、限域水热组装等方法制备得到,其性能可以通过对材料体系和制备工艺的优化而进一步提升。本文首先介绍了石墨烯纤维的制备方法,然后详细阐述了石墨烯纤维的性能,讨论了其性能提升策略,并总结了石墨烯纤维的应用,最后对石墨烯纤维的未来发展、挑战和前景进行了展望。     

高固含量丙烯酸酯的微乳液聚合

采用半连续滴加预乳液的微乳液聚合法,合成出聚合物质量分数40%、乳化剂质量分数2.5%的丙烯酸酯微乳液. 考察了单体滴加速度、乳化剂种类及其用量、电解质用量、温度和搅拌等因素对乳液粒径及性能的影响. 研究表明,聚合在相当于Winsor-Ⅰ型的聚合体系中进行,由纯单体相(滴入的单体)和O/W微乳相构成,上层单体只起储存库的作用,它在缓慢的搅拌帮助下扩散进入微乳相中,只要微乳液液面上补加的单体不扰动微乳液的平衡,即不会产生粗粒子. 单体滴加时间控制在4 h,选择质量分数为2.5%的Dowfax2A1/OP-10乳化体系,NaHCO3质量分数为0.16%,反应温度控制在75～80 ℃,搅拌速度控制在150 r/min,可使聚合反应平稳进行,得到了m(聚合物)∶m(乳化剂)=15∶1的丙烯酸酯微乳液.     

Preparation and characterization of well-defined sterically stabilized latex particles with narrow size distribution

 The synthesis and comprehensive characterization of a purely sterically stabilized latex with narrow size distribution is reported. By use of non-ionic initiators no chemically bound surface charges are generated. Stabilization of the particles is achieved through use of a non-ionic surfactant having a double bond in the hydrophobic part which is chemically bound to the surface. Analysis of the latex particles thus generated by transmission electron microscopy, disc centrifugation, and small-angle X-ray scattering (SAXS) reveals that the size distribution is narrow (standard deviation between 6 and 10%). SAXS furthermore demonstrates that the surfactant is located in a thin layer on the surface. The interaction of the particles is purely repulsive as shown by the analysis of the turbidity of the latex. The systems obtained herein may serve as model systems of water-borne purely sterically stabilized colloid particles. Received: 23 December 1997 Accepted: 18 May 1998     

沸石膜的合成、表征与应用

综述了沸石膜的合成、表征及应用。沸石膜合成最常用的方法为水热合成法,并相继发展了二次生长和微波合成法。XRD、SEM、EPMA及气体渗透为表征沸石膜常用的手段。沸石膜在分离、膜反应、催化及光学材料等方面具有广阔的应用前景。最后对沸石膜的发展进行了展望。     

硅酸钠法合成高比表面多孔二氧化硅

以硅酸钠和盐酸为原料,用化学沉淀法制备高比表面多孔SiO₂,并对其性能进行了研究.结果表明,所合成的SiO₂比表面积可达1300m₂/g以上,具有蜂窝状的微孔,孔径均匀,而且性能稳定.     

固体芯材微胶囊制备技术研究进展

文章主要介绍了微胶囊研究背景、用途及制备方法。从固体芯材料水溶性的角度,可把芯材分为亲水性和疏水性两种类型。对于水溶性芯材微胶囊的制备方法,介绍了原位聚合法、油相相分离法、喷雾干燥法和喷雾冷凝法的技术进展;对于疏水性芯材,介绍了界面聚合法、原位聚合法、水相相分离法等方法包覆微胶囊的技术进展。此外,本文还对不同类型的固体芯材所适应的制备方法及壳材料进行了探讨,从试验条件、芯材料的特性及目标产品性能等角度来选取适当的微胶囊壳材及制备方法,以期探索出更经济、实用、高效的固体芯材微胶囊化制备方法。     

Preparation and clinical application of immunomagnetic latex

Magnetic poly(methyl methacrylate) (PMMA)/poly(methyl methacrylate‐co‐methacrylic acid) [P(MMA–MAA)] composite polymer latices were synthesized by two‐stage soapless emulsion polymerization in the presence of magnetite (Fe₃O₄) ferrofluids. Different types and concentrations of fatty acids were reacted with the Fe₃O₄ particles, which were prepared by the coprecipitation of Fe(II) and Fe(III) salts to obtain stable Fe₃O₄ ferrofluids. The Fe₃O₄/polymer particles were monodisperse, and the composite polymer particle size was approximately 100 nm. The morphology of the magnetic composite polymer latex particles was a core–shell structure. The core was PMMA encapsulating Fe₃O₄ particles, and the shell was the P(MMA–MAA) copolymer. The carboxylic acid functional groups (COOH) of methacrylic acid (MAA) were mostly distributed on the surface of the composite polymer latex particles. Antibodies (anti‐human immunoglobulin G) were then chemically bound with COOH groups onto the surface of the magnetic core–shell composite latices through the medium of carbodiimide to form the antibody‐coated magnetic latices (magnetic immunolatices). The MAA shell composition of the composite latex could be adjusted to control the number of COOH groups and thus the number of antibody molecules on the magnetic composite latex particles. With a magnetic sorting device, the magnetic immunolatices derived from the magnetic PMMA/P(MMA–MAA) core–shell composite polymer latex performed well in cell‐separation experiments based on the antigen–antibody reaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1342–1356, 2005     

低分子量壳聚糖制备与应用研究进展

低分子量壳聚糖因具有特殊的生物活性而日益受到人们的关注。本文概要介绍了近5年来国内外低分子量壳聚糖的研究进展,包括低分子量壳聚糖的制备方法,如酶降解法、酸水解法、氧化降解法、物理法等,以及低分子量壳聚糖在农业、医药、抗菌、化妆品、食品等方面的应用。     

Effect of the acrylic acid content on the permeability and water uptake of poly(styrene-co-butyl acrylate) latex films

In this contribution, a theoretical modeling of the latex film formation is presented and compared to experimental results: water vapor permeability and latex film capacitance are studied as a function of acrylic acid content in poly(styrene-co-butyl acrylate) latex films. It has been shown that both water uptake and water vapor permeability are mainly affected by film morphology which in turn is defined by intercolloidal interaction and drying rate.     

磁性荧光多功能纳米探针的研制及分析应用

磁性荧光多功能纳米探针由于具有磁性分离、靶向识别、荧光成像及磁共振成像等优势,受到化学、生物及医学等领域研究者的高度关注。本文就近年来磁性荧光多功能纳米探针的研究进展作简要评述。引用文献38篇。     

超疏水性表面的制备及应用进展

近年来,受荷叶、水黾腿、壁虎脚等天然超疏水生物表面特性的启发,研究者们进行了大量仿生超疏水表面材料的制备及应用研究。超疏水性表面因其特殊的微纳分层结构,具有自清洁、防覆冰、防腐蚀、减阻等优异性能。本文阐述了表面润湿、疏水的基本机理,以及超疏水表面研究的理论基础,对超疏水表面制备的最新研究进展进行了综述,并揭示了研究中存在的问题。最后,介绍了超疏水表面在涂料、织物、防腐、抗菌及防雾等领域中的应用,展望了其未来的研究方向和前景。     

Determination of the glass transition temperature of latex films: Comparison of various methods

The glass transition temperature (T_g) for two latices with different styrene/butadiene compositions was determined by the thermal SPM probe resonance frequency method. The results were compared with the T_g values obtained by differential scanning calorimetry (DSC), dynamical mechanical analysis (DMA), process rheometer (PR) and thermo-mechanical analyzer (TMA) measurements. The T_g values detected by the thermal SPM method agreed well with the T_g values obtained by DSC and calculated by the Fox–Flory equation. DMA, on the other hand, showed a significantly higher T_g value for both latices than those obtained from theoretical calculations, the thermal SPM method and DSC. The T_g obtained from the PR curve was slightly higher for the latex with a low styrene content, whereas good agreement was obtained with the thermal SPM data for the latex with a high styrene content. The glass transition temperature determined by TMA agreed fairly well with the thermal SPM data for the latex with the low styrene content, whilst the value of T_g for the second latex was much less than those obtained by the other methods. The thermal SPM method detects changes in thermal behavior (thermal diffusivity, heat capacity) during heating of the latex films rather than changes in the mechanical properties. Information about the sample history could be seen in the thermal SPM curves, which was further associated with the degree of latex film formation, especially when the roughness of the films was taken into consideration.