Effect of ultrasound on keratin valorization from chicken feather waste: Process optimization and keratin characterization

Chicken feather (CF) has been deemed as one of the main poultry byproducts with a large amount produced globally. However, the robust chemical nature of chicken feathers has been limiting in its wide-scale utilization and valorization. The study proposed a strategy of keratin regeneration from chicken feather combining ultrasound and Cysteine (Cys)-reduction for keratin regeneration. First, the ultrasonic effect on feather degradation and keratin properties was systematically explored based on Cys-reduction. Results showed that the feather dissolution was significantly improved by increasing both ultrasonic time and power, and the former had a greater impact on keratin yield. However, the treatment time over 4 h led to a decrease of keratin yield, producing more soluble peptides, > 9.7 % of which were < 0.5 kDa. Meanwhile, prolonging time decreased the thermal stability with weight loss at a lower temperature and amino acids content (e.g., Ser, Pro and Gly) of keratin. Conversely, no remarkable damage in chemical structure and thermal stability of regenerated keratin was observed by only increasing ultrasonic power, while the keratin solubility was notably promoted and reached 745.72 mg·g⁻¹ in NaOH (0.1 M) solution (400 W, 4 h). The regenerated keratin under optimal conditions (130 W, 2.7 h, and 15 % of Cys) possessed better solubility while without obvious damage in chemical structure, thermal stability, and amino acids composition. The study illustrated that ultrasound physically improved CF degradation and keratin solubility without nature damage and provided an alternative for keratin regeneration involving no toxic reagent, probably holding promise in the utilization and valorization of feather waste.     

Effect of nanochitosan on electrochemical, interfacial and thermal properties of composite solid polymer electrolytes

PEO-based solid polymer electrolyte films with various concentrations of nanochitosan as filler and LiCF₃SO₃ as salt were prepared by membrane hot-press technique. Nanochitosan was prepared from chitosan by conventional chemical cure method. The prepared composite membranes were characterized by FT-IR, XRD, thermal, SEM, AFM analyses, electrochemical impedance spectroscopy, cyclic voltammetry and compatibility studies. The ionic conductivity and thermal stability of the polymer membranes were enhanced significantly by addition of nanofiller. The compatibility studies reveal that filler incorporated membrane is better compatible with lithium interface than filler free electrolyte.     

Nanoscale Structure of Urethane/Urea Elastomeric Films

The nanostructure of urethane/urea elastomeric membranes was investigated by small-angle X-ray scattering (SAXS) in order to establish relationships between their structure and mechanical properties. The networks were made up of polypropylene oxide (PPO) and polybutadiene (PB) segments. The structural differences were investigated in two types of membranes with the same composition but with different thermal treatment after casting. Type I was cured at 70–80 °C and type II at 20 °C. Both membranes showed similar phase separation by TEM, with nanodomains rich in PB or PPO and 25 nm dimensions. The main difference between type I and type II membranes was found by SAXS. The type I membrane spectra showed, besides a broad band at a 27-nm q value (modulus of the scattering vector), an extra band at 6 nm, which was not observed in the type II membrane. The SAXS spectra were interpreted in terms of PPO, PB soft segments, and urethane/urea links, as well as hard moiety segregation in the reaction medium. This additional segregation (q = 7 nm), although subtle, results in diverse mechanical behavior of in both membranes.     

Interfacial and adhesional aspects in polyurethane (PUR) membrane coating on Si3N4 surface of ISFET gate for REFET fabrication

Polyurethane membrane coatings on: (i) packaged ISFET (ion-sensitive field-effect transistor) devices and (ii) those in the form of chips have been investigated. The study has revealed that for reliable membrane deposition, proper film adhesion at polyurethane-silicon nitride and polyurethane-cured epoxy interfaces of ISFET was necessary. Membranes formed on packaged ISFETs were found to lift off after a short time period (<1 h) when immersed in pH 6.86 buffer solution. This was because the adhesion between polyurethane and surrounding cured epoxy was insufficient. If the membrane coating was performed on the chip, and the chip was subsequently packaged (protecting the coating on the sides with epoxy and curing the epoxy to fasten the membrane), the coating was not attacked in buffer solution. Based on these studies, a process for depositing reliable, long-lasting polyurethane membranes on ISFET gate surfaces has been proposed. Membrane reliability has been confirmed by storing the membrane-coated ISFET in buffer solution over seven days and periodically observing it microscopically. Membranes have been characterized through pH sensitivity and gate-source impedance measurements. pH sensitivities of ISFETs with polyurethane membranes were measured to be ≤4.2 mV/pH.     

Acoustic and hydrodynamic cavitation assisted hydrolysis and valorisation of waste human hair for the enrichment of amino acids

Hair waste in large amount is produced in India from temples and saloons, India alone exported approximately 1 million kg of hair in 2010. Incineration and degradation of waste human hair leads to environmental concerns. The hydrothermal process is a conventional method for the production of hair hydrolysate. The hydrothermal process is carried out at a very high temperature and pressure, which causes the degradation of heat-sensitive essential amino acids, thereby depleting the nutritional value. This work deals with alkaline hydrolysis of human hair using acoustic and hydrodynamic cavitation, and comparison with the conventional method. The optimal operating conditions for highest efficiency was observed, for the hydrolysis of 1 g of sample hairs in 100 mL of solution, at 4:1 (KOH: hair) ratio, soaking time of 24 h, the ultrasonic power density of 600 W dm⁻³ (20 KHz frequency and input power 200 W) or hydrodynamic cavitation inlet pressure of 4 or 7 bars. Cavitation results in rupture of disulfide linkages in proteins and mechanical effects lead to cleavage of several hydrogen bonds breaking the keratin sheet structure in hair. Breakdown of bonds leads to a decrease in viscosity of the solution. 10% and 6% reduction in viscosity is obtained at optimal conditions for ultrasonic and hydrodynamic cavitation treatment, respectively. FTIR analysis of produced hair hydrolysate confirmed that the disulfide bonds in hair proteins are broken down during cavitation. The amino acid of hair hydrolysate, prepared using cavitation, has a relatively higher digestibility and nutritional value due to the enhancement of amino-acid content, confirmed using amino acid analysis. Cavitation assisted hair hydrolysate has a potential application in agricultural engineering as a fertilizer for improvement of the quality of the soil and land. Cavitation based hair hydrolysate can also be used as an environmentally friendly and economical source of essential amino acids and digestibles for animal or poultry feed.     

The effect of disulfide bonds on protein folding,unfolding, and misfolding investigated by FT–Raman spectroscopy

Disulfide bond is relevant to many protein folding/unfolding functions and conformational diseases. To elucidate the effects of disulfide bonds on protein folding, unfolding, and misfolding, we performed Fourier transform–Raman measurements on serial chemical‐induced denaturations of bovine serum albumin (BSA). By directly monitoring Raman stretching at S–S (~507 cm⁻¹), S–H (~2566 cm⁻¹), amide I (1655 cm⁻¹ for α‐helix; 1667 cm⁻¹ for β‐sheet structure), and amide III (>1300 cm⁻¹ for α‐helix; 1246 cm⁻¹ for β‐sheet structure), the status of disulfide bonds and secondary structure of BSA at different states were elucidated. Both disulfide bonds and secondary structure (mostly in α‐helix) of BSA appeared relatively stable even when the protein was unfolded by urea solution. However, disulfide bonds were completely reduced and protein secondary structure changed from α‐helix to a relatively β‐sheet dominant when the protein was modified by the mixed solution of urea and dithiothreitol (urea/DTT). Adhering to these structural changes, the protein proceeded to different degrees of polymerization. BSA would aggregate into a high molecular mass (over 700 kDa) of protein ensemble when it was exposed to the mixed urea/DTT solution. An irreversible change in S–S/S–H conversion and secondary structure was responsible for protein misfolding. We demonstrate here that Fourier transform–Raman directly probe S–S/S–H conversion and secondary structural change of BSA at different states, and these results clearly indicate that disulfide bonds and secondary structure of BSA serve as concrete frameworks to stabilize protein structure. As the frameworks collapse, the protein undergoes an irreversible structural change and results in protein misfolding. Copyright © 2016 John Wiley & Sons, Ltd.     

Non-acoustical and acoustical properties of reticulated and partially reticulated polyurethane foams

A series of measurements on four polyurethane foam samples with pore membranes and a polyurethane foam sample without pore membranes have been made. Tortuosity has been deduced using the ultrasonic slope method. It has been found that the deduced value of tortuosity depends on the measurement temperature and for two of the polyurethane foam samples with many pore membranes physically meaningful values of tortuosity cannot be obtained at a temperature of around 25 °C. However more realistic values of tortuosity have been obtained by from measurements at or around the glass transition temperature of polyurethane foam (i.e. at ?20 °C) when using the ultrasonic slope method.Flow resistivity, Young’s moduli and loss factors have been measured also.Vibration of the pore membranes has been observed to influence the effective density and characteristic impedance derived from the surface impedance measured in an impedance tube. This paper discusses relationships between membrane vibration and the slow and fast compressional waves. The relative merits of predictions based on rigid-porous models and the Biot–Johnson–Champoux–Allard model are discussed also.     

Cleaning results of new and fouled nanofiltration membrane characterized by contact angle, updated DSPM, flux and salts rejection

In membrane process industries, membrane cleaning is one of the most important concerns from both economical and scientific points of view. Though cleaning is important to recover membrane performance, an inappropriate selection of cleaning agents may result into unsatisfactory cleaning or irreparable membrane.In this study the cleaning performance has been studied with measurements of membrane contact angle, Updated Donnan steric partitioning pore model (UDSPM) and salt rejection as well as flux measurement. Thin film nanofiltration (NF) membranes such as DK, HL and DL provided by GE Osmonics are used in this study. Tests were carried out with virgin DK, HL and DL as well as fouled DK membranes. Several cleaning agents were investigated; some of them were analytical grade such as HCl, NaOH and others such as SDS, mix agents were commercial grade agents that are already in use in commercial plants. Contact angle, DSPM and salt rejection as well as flux of virgin and fouled membranes before and after chemical cleaning were measured and compared. The contact angle measurements with and without chemical cleaning of different virgin and fouled membranes revealed very interesting results which may be used to characterise the membrane surface cleanliness. The contact angle results revealed that the cleaning agents are found to modify membrane surface properties (hydrophobicity/hydrophilicity) of the treated and untreated virgin and fouled membranes. The details of these results were also investigated and are reported in the paper. However, UDSPM method did not give any valuable information about pore size of the untreated and treated NF membranes. The salt rejection level of monovalent and divalent ions before and after cleaning by high and low pH cleaning agents is also investigated and is reported in the paper.     

Comparative performance study of four nanofiltration membranes in the separation of mercury and chromium

In this paper, four nanofiltration membranes, viz., (1) coating of N,O-carboxymethyl chitosan (NOCC) on polyethersulfone ultrafiltration (PES UF) substrate membrane; (2) chitosan and acrylonitrile butadiene styrene (ABS) in the blend ratio of 0:100 (ABS); (3) diethylenetriamine pentaacetic acid coating via casting method on PES UF substrate membrane (DC50); and (4) NOCC and cellulose acetate (CA) polymer blend solution (0.4?wt%) coated on a glass plate (NOCC?CCA), were selected from our previous work. By using these membranes, separation behaviour of mercury and chromium ions was studied at different operating conditions from their salt solutions. From the experimental data, it is evident that ABS membrane gave highest observed solute rejection (92.88 and 88.67?% for 10?ppm feed concentration of mercury sulphate?Cwater system and chromium sulphate?Cwater system, respectively) and NOCC?CCA membrane gave highest permeate volume flux. But from the rejection as well as permeate volume flux point of view, NOCC?CPES membrane is considered to be the best choice among all the membranes.     

Synchrotron radiation analysis in the study of pollution in the ring‐billed gull (larus delawarensis): a novel application of the technique

Synchrotron radiation analysis is a powerful tool for identifying pollutants. Here, we explore the distribution of elements in the flight feathers of ring‐billed gulls, Larus delawarensis, to identify potential pollutants and their distribution throughout the feather. Our analysis using Synchrotron Radiation Analysis and Environmental Scanning Electron Microscopy has identified a variety of metals that are integral parts of the feather structure including: calcium (Ca), strontium (Sr), zinc (Zn) and iron (Fe). The darker portions of the flight feather were enriched with Zn and Fe, which supports the suggestion that feather melanins are efficient ligands of some metals found in the environment, sequestering potentially harmful particles away from the body. However, trace lead (Pb) acquired from the regional pollution was detected only in females, and it was distributed across both the melanized and non‐melanized portions of the feather suggesting that only some metals are efficiently sequestered by melanins. Overall this study highlights a potential method for identifying pollutants using bird feathers, which has broader implications on environmental sensing as well as avian and human health. Copyright © 2013 John Wiley & Sons, Ltd.     

A study on LiBOB-based nanocomposite gel polymer electrolytes (NCGPE) for Lithium-ion batteries

Lithium bis(oxalato)borate (LiBOB) salt-based nanocomposite gel polymer blend electrolyte (PVdF/PVC) membranes have been prepared by solution casting technique for various concentrations of TiO₂. The effect of anatase structure of nanosized titanium dioxide in the plasticized PVC/PVdF + LiBOB matrix has been observed in the 2:1 salt filler ratio in the impedance measurements that the conductivity is increased one order of magnitude higher than the filler-free electrolyte (1:0 salt:filler ratio). The phase morphology of this electrolyte membrane represents the appearance of the free volume sites for ionic migration.     

Effects of co-solutes on the hydrogen bonding structure and dynamics in aqueous N-methylacetamide solution: a molecular dynamics simulations study

The effects of trimethylamine-N-oxide (TMAO), urea and tetramethyl urea (TMU) on the hydrogen bonding structure and dynamics of aqueous solution of N-methylacetamide (NMA) are investigated by classical molecular dynamics simulations. The modification of the water's hydrogen bonding structure and interactions is calculated in presence of these co-solutes. It is observed that the number of four-hydrogen-bonded water molecules in the solution decreases significantly in the presence of TMAO rather than urea and TMU. The lifetime and structural relaxation time of water–water and NMA–water hydrogen bonds show a strong increase with the addition of TMAO and TMU in the solution, whereas the change is nominal in case of urea solution. It is also found that the translational and rotational dynamics of water and NMA slowdown with increasing the concentration of these osmolytes. The slower dynamics of water and NMA is more pronounced in case of TMAO and TMU solution, as these co-solutes strengthen the average hydrogen bond energies between water–water and NMA–water, whereas urea has a little effect on the hydrogen bonding structure and dynamics of aqueous NMA solution. The calculated self-diffusion coefficient values for water and these co-solutes are in similar pattern with experimental observations.     

Plasma surface modification of nanofiltration (NF) thin-film composite (TFC) membranes to improve anti organic fouling

Commercial nanofiltration (NF) thin-film composite (TFC) membranes were treated by low-pressure NH₃ plasma, and the effects of the plasma treatment were investigated in terms of the membrane hydrophilicity, pure water flux, salt rejection, protein adsorption, and humic acid fouling. Experimental results indicated that the membrane surface hydrophilicity was increased by the plasma treatment, and changes in the hydrophilicity as well as membrane performance including permeate flux and fouling varied with the original membrane characteristics (e.g., roughness and hydrophilicity). Water flux of plasma treated membranes was the highest with 10 min and 90 W of plasma treatment, and salt rejection was mainly affected by the intensity of the plasma power. Results of bovine serum albumin (BSA) adsorption demonstrated that the protein adsorption decreased with increasing plasma treatment time. The plasma treatment that resulted in more negatively charged surfaces could also better prevent Aldrich humic acid (AHA) attachment on the membrane surface.     

Influence of photo-induced superhydrophilicity of titanium dioxide nanoparticles on the anti-fouling performance of ultrafiltration membranes

Fouling is one of the most present prominent problems in almost all membrane processes. An increase in the membrane hydrophilicity is one of the effective ways to improve the membrane resistance to fouling. In this research, TiO₂ nanoparticles were deposited on the surface of composite ultrafiltration (UF) membrane, and then irradiated by ultraviolet (UV) light. The coating of the membrane surface with TiO₂ nanoparticles and radiation with (UV) light led to the considerable increase of hydrophilicity on the membrane surface. The deposition of TiO₂ nanoparticles was carried out through coordinance bonds with OH functional groups of the polymer on the membrane surface. The flux through a coated and (UV) light radiated membrane was increased to a large extent compared to a virgin membrane. In this research, the effect of different concentrations of TiO₂ nanoparticles in the presence and absence of (UV) irradiation was investigated, and the role of increasing of hydrophilicity on the anti-fouling property of membranes was studied. In order to characterize the membranes FTIR, XRD, SEM, water contact angle and cross-flow filtration were employed. This procedure is a useful technique for improvement of hydrophilicity to decrease (increase) fouling (anti-fouling performance) and enhance the permeation of membranes.     

A Novel Hydrophilic Modification of PTFE Membranes Using In Situ Deposited PANI

A new kind of polyaniline/polytetrafluoroethylene (PANI/PTFE) composite membrane has been successfully prepared by in situ deposition of PANI onto PTFE membranes during the aniline's dispersion polymerization. The PTFE membrane was plasma treated before the aniline polymerization; the induced alteration of morphology and surface properties accelerated the polymerization of aniline and increased the number density of the deposited PANI onto the PTFE surface. The surface properties and morphology of the membranes were characterized. The composite PANI/PTFE membrane exhibited an enhanced flux in salt water separation, which is up to 75% higher than the pristine membrane.     

Polydopamine Bilayer Nanofiltration Membranes with Excellent Resistance to Delamination

Abstract

Bilayer nanofiltration (NF) membranes tend to delaminate and have poor stability when applied in organic solvents due to their bi-layered structure. In this study we prepared two types of polydopamine (PDOPA) modified NF membranes including PDOPA-TMC (trimesoyl chloride)/PSF and PDOPA/PIP(Piperazine)-TMC/PSF NF membranes on polysulfone (PSF) ultrafiltration membranes via interfacial polymerization based on PDOPA’s specialized molecular structure and high adhesion property. The separation performance and stability of the NF membranes were investigated. Both the polyester bonds of the PDOPA bilayer membranes and the bioadhesion of the PDOPA were simultaneously beneficial to improving the structure and chemical stabilities of the bilayer membranes. After soaking both the PDOPA-TMC/PSF and PDOPA/PIP-TMC/PSF NF membranes in ethanol solvent for 12?days, the rejection of Congo red only decreased by 1.8% (original, 99.9%) and 1.2% (original, 99.9%), respectively. For the PDOPA/PIP-TMC/PSF NF membrane, the rejection of Na₂SO₄ was only reduced by 1.6% (original, 98.5%). Moreover, the separation performances of both the PDOPA-TMC/PSF and PDOPA/PIP-TMC/PSF NF membranes were still excellent after soaking in a sodium hypochlorite solution (50?ppm) for 240?h (12,000?ppm·hours). The NF membranes thus exhibited long-term structural stability in ethanol and excellent chemical stability in the sodium hypochlorite solution. In particular, no delamination was observed in the above experiments, which is significant for their use in the wastewater treatment field.     

Preparation of poly(vinyl alcohol)–silicone based hybrid membranes for the pervaporation separation of water–acetic acid mixtures

Hybrid membranes were prepared using poly(vinyl alcohol) (PVA) and tetraethylorthosilicate (TEOS) via hydrolysis followed by condensation. The obtained membranes were characterized by Fourier transform infrared spectroscopy, wide-angle x-ray diffraction and differential scanning calorimetry. A remarkable decrease in degree of swelling was observed with increasing TEOS content in membranes and is attributed to the formation of hydrogen bonding and covalent bonds in the membrane matrix. The pervaporation performance of these membranes for the separation of water–acetic acid mixtures was investigated in terms of feed concentration and the content of TEOS used as cross-linking agent. The membrane containing 1 : 2 mass ratio of PVA and TEOS gave the highest separation selectivity of 1116 with a flux of 3.33 × 10^?2kg/m²h at 30°C for 10 mass% of water in the feed. Except for membrane M-1, the observed values of water flux are close to the values of total flux in the investigated composition range, signifying that the developed membranes are highly water selective. From the temperature dependence of diffusion and permeation values, the Arrhenius apparent activation parameters have been estimated. The resulting activation energy values obtained, showing that water permeation is lower than that of acetic acid, suggest that the membranes have higher separation efficiency. The activation energy values calculated for total permeation and water permeation are close to each other for all the membranes except membrane M-1, signifying that coupled-transport is minimal because of the higher selective nature of membranes. The negative heat of sorption values (ΔH _s) for water in all the membranes suggests a Langmuir mode of sorption.     

Trehalose-protected lipid membranes for determining membrane protein structure and insertion

Trehalose preserves lipid bilayers during dehydration and rehydration by replacing water to form hydrogen bonds between its own OH groups and lipid headgroups. We compare the lipid conformation and dynamics between trehalose-protected lyophilized membranes and hydrated membranes, to assess the suitability of the trehalose-containing membrane as a matrix for membrane protein structure determination. (31)P spectra indicate that the lipid headgroup of trehalose-protected dry POPC membrane (TRE-POPC) have an effective phase transition temperature that is approximately 50K higher than that of the hydrated POPC membrane. In contrast, the acyl chains have similar transition temperatures in the two membranes. Intramolecular lipid (13)C'-(31)P distances are the same in TRE-POPC and crystalline POPC, indicating that the lipid headgroup and glycerol backbone conformation is unaffected by trehalose incorporation. Intermolecular (13)C-(31)P distances between a membrane peptide and the lipid headgroups are 10% longer in the hydrated membrane at 226 K than in the trehalose-protected dry membrane at 253 K. This is attributed to residual motions in the hydrated membrane, manifested by the reduced (31)P chemical shift anisotropy, even at the low temperature of 226 K. Thus, trehalose lyoprotection facilitates the study of membrane protein structure by allowing experiments to be conducted at higher temperatures than possible with the hydrated membranes.     

Design of novel SPEEK-based proton exchange membranes by self-assembly method for fuel cells

Fuel cell represents a new energy conversion device, which promises to provide clean source of power. Fuel cell [particularly proton exchange membrane fuel cell and direct methanol fuel cell (DMFC)] is a promising candidate for transportation and portable power source applications. In DMFC, there is a problem of methanol crossover. In order to reduce such a problem, there has been an intensive research activity in the modification of Nafion. In the present investigation, self-assembled membranes were fabricated with sulfonated polyether ether ketone as the core part of the membrane. Aminated polysulfone and sulfonated polysulfone were used as the layers in order to prevent the crossover of methanol. The assembled membranes were characterized by ion exchange capacity, water and methanol absorption, and durability. The methanol permeability and selectivity ratio proved a strong influence on DMFC application. Scanning electron microscopy proved smooth surface, which established strong cohesive force for the polymer chains. Among the synthesized self-assembled membranes, the membrane with two bilayers was the best in terms of power density in DMFC. The membrane electrode assembly with two bilayers showed higher performance (~61.05 mW/cm²) than sulfonated poly(ether ether ketone) and Nafion in DMFC.