Supported lipid bilayers on biocompatible polysaccharide multilayers

Formation of supported lipid bilayers on soft polymer cushions is a useful approach to decouple the membrane from the substrate for applications involving membrane proteins. We prepared biocompatible polymer cushions by the layer-by-layer assembly of two polysaccharide polyelectrolytes, chitosan (CHI) and hyaluronic acid, on glass and silicon substrates. (CHI/HA)(5) films were characterized by atomic force microscopy, giving an average thickness of 57 nm and roughness of 25 nm in aqueous solution at pH 6.5. Formation of zwitterionic lipid bilayers by the vesicle fusion method was attempted using DOPC vesicles at pH 4 and 6.5 on (CHI/HA)(5) films. At higher pH adsorbed lipids had low mobility and large immobile lipid fractions; a combination of fluorescence and AFM indicated that this was attributable to formation of poor quality membranes with defects and pinned lipids rather than to a layer of surface-adsorbed vesicles. By contrast, more uniform bilayers with mobile lipids were produced at pH 4. Fluorescence recovery after photobleaching gave diffusion coefficients that were similar to those for bilayers on PEG cushions and considerably higher than those measured on other polyelectrolyte films. The results suggest that the polymer surface charge is more important than the surface roughness in controlling formation of mobile supported bilayers. These results demonstrate that polysaccharides provide a useful alternative to other polymer cushions, particularly for applications where biocompatibility is important.     

PEG-covered lipid surfaces: bilayers and monolayers

In this review paper we survey the ways in which various micropipet techniques have been used to study the mechanochemical and interactive features of lipid bilayer vesicles and monolayer-coated gas bubbles. Special emphasis will be made on characterizing the barrier properties of grafted PEG layers and how a hierarchical approach that uses a short barrier and extended ligand allows us to start to mimic nature's own solution to the problem of ubiquitous repulsion and specific attraction. The information gained from such studies not only characterizes the membrane and other lipid surfaces and their intersurface interactions from a fundamental materials science perspective, but also provides essential materials property data that are required for the successful design and deployment of lipid-based carriers and other capsules in applications involving this so-called ‘stealthy’ surface.     

A synthetic transmembrane polyether model active in lipid bilayers

A model polyether-based ion channel-like compound was rationally designed and synthesized. Macromolecules 1c-f were incorporated into phospholipid vesicles and shown to facilitate the transmembrane sodium transport.     

Surface-supported bilayers with transmembrane proteins: role of the polymer cushion revisited

Protein lateral mobility in surface-supported bilayers is often much lower than the mobility of the lipids. In the present study we explore whether the incorporation of a PEG cushion between the bilayer and the substrate increases the lateral mobility of transmembrane proteins in bilayers produced via directed assembly, a method based on Langmuir-Blodgett deposition techniques. In our experiments, the PEG cushions were incorporated by adding PEG lipids to the protein/lipid monolayer at the air/water interface, at the first step of bilayer assembly. The protein and lipid mobilities in 160 different bilayers, with various PEG molecular weights and PEG lipid concentrations, were measured and compared. We found that the measured diffusion coefficients do not depend on the PEG molecular weight or the PEG lipid concentration and are very similar to the values measured in the absence of PEG. Therefore, contrary to our expectations, we found that a PEG cushion does not necessarily increase protein mobility, suggesting that the low protein mobility is not a consequence of protein-substrate interactions. Furthermore, we showed that the low protein mobility is not due to protein aggregation. The major determinant of protein mobility in surface-supported bilayer systems appears to be the method of bilayer assembly. While proteins were always mobile if the bilayers were prepared using the directed assembly method, in the presence and absence of a PEG cushion, other bilayer assembly protocols resulted in complete lack of protein mobility.     

Floating lipid bilayers deposited on chemically grafted phosphatidylcholine surfaces

Floating supported bilayers (FSBs) are new systems which have emerged over the past few years to produce supported membrane mimics, where the bilayers remain associated with the substrate, but are cushioned from the substrates constraining influence by a large hydration layer. In this paper we describe a new approach to fabricating FSBs using a chemically grafted phospholipid layer as the support for the floating membrane. The grafted lipid layer was produced using a Langmuir-Schaeffer transfer of acryloyl-functionalized lipid onto a pre-prepared substrate, with AIBN-induced cross-polymerization to permanently bind the lipids in place. A bilayer of DSPC was then deposited onto this grafted monolayer using a combination of Langmuir-Blodgett and Langmuir-Schaeffer transfer. The resulting system was characterized by neutron reflection under two water contrasts, and we show that the new system shows a hydrating layer of approximately 17.5 A in the gel phase, which is comparable to previously described FSB systems. We provide evidence that the grafted substrate is reusable after cleaning and suggest that this greatly simplifies the fabrication and characterization of FSBs compared to previous methods.     

Scanning near-field IR microscopy of proteins in lipid bilayers

We use infrared near-field microscopy to chemically map the morphology of biological matrices. The investigated sample is built up from surface-tethered membrane proteins (cytochrome c oxidase) reconstituted in a lipid bilayer. We have carried out infrared near-field measurements in the frequency range between 1600 and 1800 cm(-1). By simultaneously recording the topography and chemical fingerprint of the protein-tethered lipid bilayer with a lateral resolution of 80 nm × 80 nm, we were able to probe locally the chemical signature of this membrane and to provide a local map of its surface morphology.     

Chloride transport across lipid bilayers and transmembrane potential induction by an oligophenoxyacetamide

This contribution describes the discovery and properties of a synthetic, low-molecular weight compound that transports Cl- across bilayer membranes. Such compounds have potential as therapeutics for cystic fibrosis and cancer. The H+/Cl- co-transport activities of acyclic tetrabutylamides 1-6 were compared by using a pH-stat assay with synthetic EYPC liposomes. The ion transport activity of the most active compound, trimer 3, was an order of magnitude greater than that of calix[4]arene tetrabutylamide C1 a macrocycle known to function as a synthetic ion channel. Trimer 3 has an unprecedented function for a synthetic compound, as it induces a stable potential in liposomes experiencing a transmembrane Cl-/SO42- gradient. Data from both pH-stat and 35Cl NMR experiments indicate that 3 co-transports H+/Cl-. Although 3 transports both Cl- and H+ the overall process is not electrically silent. Thus, trimer 3 induces a stable potential in LUVs due to a transmembrane anionic gradient. The ability of trimer 3 to transport Cl-, to maintain a transmembrane potential, along with its high activity at uM concentrations, its low molecular weight, and its simple preparation, make this compound a valuable lead in drug development for diseases caused by Cl- transport malfunction.     

Supported lipid bilayers on spacious and pH-responsive polymer cushions with varied hydrophilicity

We report the successful formation of supported multicomponent lipid bilayer membranes (sLBMs) on polymer cushions consisting of a set of alternating maleic acid copolymers. The formation of sLBMs was triggered by a transient reduction of the electrostatic repulsion between the polymer cushions and the lipid vesicles by lowering the solution's pH to 4. Upon formation, the stability of the sLBMs was not affected by subsequent variations of the environmental pH. The degree of hydrophilicity and swelling of the anionic polymer cushions was found to determine both the kinetics of the membrane formation and the mobility of the lipid bilayer with lipid diffusion coefficients in the range from 0.26 to 2.6 microm2s(-1). The introduced polymer cushion system is concluded to provide a versatile base for the integration of active transmembrane proteins in sLBMs.     

Supported lipid bilayers lifted from the substrate by layer-by-layer polyion cushions on self-assembled monolayers

The formation of lipid bilayers, lifted from the solid substrate by layer-by-layer polyion cushions, on self-assembled monolayers (SAMs) on gold was investigated by surface plasmon resonance (SPR) and fluorescence recovery after photobleaching (FRAP). The polyions poly(diallyldimethylammonium chloride) (PDDA) and polystyrene sulfonate (PSS) sodium salt were used for the layer-by-layer polyion macromolecular assembly. The cushion was formed by electrostatic interaction of PDDA/PSS/PDDA layers with a negatively charged surface of an SAM of 11-mercaptoundecanoic acid (MUA) on gold. The lipid bilayer membranes were deposited by vesicle fusion with different compositions of SOPS (an anionic lipid, 1-stearoyl-2-oleoyl-phosphatidylserine) and POPC (a zwitterionic lipid, 1-palmitoyl-2-oleoylphosphatidylcholine). In the case of pure SOPS and for lipid mixtures with a POPC composition up to 25%, single bilayers were deposited. FRAP experiments showed that single bilayers supported on PDDA/PSS/PDDA/MUA were mobile at room temperature, with lateral coefficients of approximately (1.2–2.1)×10⁻⁹ cm²/s. The kinetics of the addition of the ion-channel-forming peptide protegrin-1 to the supported bilayers was detected by SPR. A two-step interaction was observed, similar to the association behavior of protegrin-1 with bilayers supported on PDDA/MUA. The results are similar to that of supported lipid bilayers without a layer-by-layer cushion. The model membrane system in this work is a potential biosensor for mimicking the natural activities of biomolecules and is a possible tool to investigate the fundamental properties of biomembranes.     

New lipopolymers for the fixation of lipid bilayers

Here we report the synthesis of end functionalized lipopolymers. For this purpose different lipoinitiators with a bromo group have been prepared, based on monoalkyl and dialkyl N‐substituted 2‐bromo‐propionamides. Theses lipoinitiators could then be used as initiators for atom transfer radical polymerization of acrylamides. Different lipopolymers were synthezised. The polymer back bone was either a homopolymer or a copolymer. Thin polymer films of 20 Å thickness of the copolymers were self‐assembled onto surfaces and, finally, vesicle fusion on these polymer cushions was studied.     

Probing the interplay between amyloidogenic proteins and membranes using lipid monolayers and bilayers

Many degenerative diseases such as Alzheimer's and Parkinson's involve proteins that have a tendency to misfold and aggregate eventually forming amyloid fibers. This review describes the use of monolayers, bilayers, supported membranes, and vesicles as model systems that have helped elucidate the mechanisms and consequences of the interactions between amyloidogenic proteins and membranes. These are twofold: membranes favor the formation of amyloid structures and these induce damage in those membranes. We describe studies that show how interfaces, especially charged ones, favor amyloidogenic protein aggregation by several means. First, surfaces increase the effective protein concentration reducing a three-dimensional system to a two-dimensional one. Second, charged surfaces allow electrostatic interactions with the protein. Anionic lipids as well as rafts, rich in cholesterol and gangliosides, prove to play an especially important role. Finally, these amphipathic systems also offer a hydrophobic environment favoring conformational changes, oligomerization, and eventual formation of mature fibers. In addition, we examine several models for membrane permeabilization: protein pores, leakage induced by extraction of lipids, chaotic pores, and membrane tension, presenting illustrative examples of experimental evidence in support of these models. The picture that emerges from recent work is one where more than one mechanism is in play. Which mechanism prevails depends on the protein, its aggregation state, and the lipid environment in which the interactions occur.     

A study of reconstituted anion channels using lipid bilayers

A chloride channel from impermeant sarcoplasmic reticulum (SR) was embedded in a planar lipid bilayer (BLM) and its electrical properties determined. Studies using ER-derived vesicles fused with BLMs have shown that they are permeable to Na⁺, K⁺, choline and Cl⁻ but less permeable to Ca²⁺ and Mg²⁺. Though highly permeable to K⁺, the liver ER membrane has been postulated to a lack of an efficient ion-conducting structure for K⁺ channel in the SR. The present study was undertaken with the aim to look at the anionic, Ca²⁺ and K⁺ permeability pathways present in the ER membrane. Our reconstituted system exhibits considerable anionic permeability following the sequence: SCN⁻>I⁻>Br⁻Cl⁻>gluconate. The findings suggest the chloride channels have low field-strength sites. It can be pharmacologically dissected to Zn²⁺-sensitive and DIDS-sensitive types. The gating of the channel is weakly voltage-dependent and at higher positive or negative voltages the channel prefers the low sub-conductance states.     

Thermodynamic study of benzocaine insertion into different lipid bilayers

Despite the general consensus concerning the role played by sodium channels in the molecular mechanism of local anesthetics, the potency of anaesthetic drugs also seems to be related with their solubility in lipid bilayers. In this respect, this work represents a thermodynamic study of benzocaine insertion into lipid bilayers of different compositions by means of molecular dynamics simulation. Thus, the free energy profiles associated with benzocaine insertion into symmetric lipid bilayers composed of different proportions of dipalmitoylphosphatidylcholine and dipalmitoylphosphatidylserine were studied. From the simulation results, a maximum in the free energy (ΔG) profile was measured in the region of the lipid/solution interface. This free energy barrier appears to be very much dependent on the lipid composition of the membrane. On the other hand, the minimum free energy (ΔG) within the bilayer remained almost independent of the lipid composition of the bilayer. By repeating the study at different temperatures, it was seen how the spontaneity of benzocaine insertion into the lipid bilayer is due to an increase in the entropy associated with the process.     

Flexoelectricity of lipid bilayers

Abstract

The direct flexoeffect in single lipid bilayers in the form of black lipid membranes has been investigated experimentally by the oscillating pressure technique in the regime of voltage measurement. Black lipid membranes of various composition have been studied in order to check the effect of lipid surface charge on the curvature-electric response and its frequency dependence; these include egg yolk lecithin (low negative charge); egg yolk lecithin plus phosphatidyl serine (high negative charge); egg yolk lecithin with surface adsorbed ions of uranyl acetate (high positive charge). An increase of the response has been found by increasing the surface charge and a reversal of the sign of the flexoelectric coefficient from positive to negative has been obtained by changing the sign of the surface charge from negative to positive. These results underline the leading role of the contribution of the surface charge to the flexoelectricity of lyotropics. Their theoretical interpretation provides further insight into the molecular mechanism of this phenomenon.     

Reconstitution of channel proteins from Torpedo electroplax into virtually solvent-free lipid bilayers

The Torpedo electric organ has been the subject of intensive biochemical and biophysical investigations. It is a standard source of vesicle preparations containing large amounts of acetylcholine receptor protein as well as other proteins. Of these, the acetylcholine receptor channel and the chloride channel have been reconstituted into lipid bilayer membranes to date.In reconstitution experiments with virtually solvent-free lipid bilayers, we have detected a number of other ion channels, not described before, in bilayers containing solvents. This suggests that these channels are affected by the amount of solvent in the membrane, and that the Torpedo electroplax vesicles are a useful source for many physiologically relevant ion channel proteins.     

Synthetic analogues of glycosylphosphatidylinositol-anchored proteins and their behavior in supported lipid bilayers

Positioned at the C-terminus of many eukaryotic proteins, the glycosylphosphatidylinositol (GPI) anchor is a posttranslational modification that anchors the modified proteins in the outer leaflet of the plasma membrane. GPI-anchored proteins play vital roles in signal transduction, the vertebrate immune response, and the pathobiology of trypanosomal parasites. While many GPI-anchored proteins have been characterized, the biological functions of the GPI anchor have yet to be elucidated at a molecular level. We synthesized a series of GPI-protein analogues bearing modified anchor structures that were designed to dissect the contribution of various glycan components to the GPI-protein's membrane behavior. These anchor analogues were similar in length to native GPI anchors and included mimics of the native structure's three domains. A combination of expressed protein ligation and native chemical ligation was used to attach these analogues to the green fluorescent protein (GFP). These modified GFPs were incorporated in supported lipid bilayers, and their mobilities were analyzed using fluorescence correlation spectroscopy. The data from these experiments suggest that the GPI anchor is more than a simple membrane-anchoring device; it also may prevent transient interactions between the attached protein and the underlying lipid bilayer, thereby permitting rapid diffusion in the bilayer. The ability to generate chemically defined analogues of GPI-anchored proteins is an important step toward elucidating the molecular functions of this interesting post-translational modification.     

Solid-state NMR spectroscopy of aligned lipid bilayers at low temperatures

This study, for the first time, demonstrates that it is possible to mechanically align lipid bilayers at a very low temperature (as low as the gel-to-liquid crystalline phase transition temperature). Performing NMR experiments on mechanically aligned lipid bilayers at a low temperature increases the signal-to-noise ratio, the resolution, and the span of NMR parameters. The increased lifetime of the alignment and the nature of the bilayer sample would enhance the application of solid-state NMR techniques to study membrane proteins.     

Electrostatic model for mixed cationic-zwitterionic lipid bilayers

The current interest in mixed cationic-zwitterionic lipid membranes derives from their potential use as transfer vectors in nonviral gene therapy. Mixed cationic-zwitterionic lipid membranes have a number of structural properties that are distinct from the corresponding anionic-zwitterionic lipid membranes. As known from experiment and reproduced by computer simulations, the average cross-sectional area per lipid changes nonmonotonically with the mole fraction of the charged lipid, passing through a minimum at a roughly equimolar mixture. At the same time, the average orientation of the zwitterionic headgroup dipoles changes from more parallel to the membrane plane to more perpendicular. We suggest a simple mean-field model that reveals the physical mechanisms underlying the observed structural properties. To backup the mean-field calculations, we have also performed Monte Carlo simulations. Our model extends Poisson-Boltzmann theory to include (besides the cationic headgroup charges) the individual charges of the zwitterionic lipid headgroups. We model these charges to be arranged as dipoles of fixed length with rotational degrees of freedom. Our model includes, in a phenomenological manner, the changes in steric headgroup interactions upon reorientation of the zwitterionic headgroups. Our numerical results suggest that two different mechanisms contribute to the observed structural properties: one involves the lateral electrostatic pressure and the other the zwitterionic headgroup orientation, the latter modifying steric headgroup interactions. The two mechanisms operate in parallel as they both originate in the electrostatic properties of the involved lipids. We have also applied our model to a mixed anionic-zwitterionic lipid membrane for which neither a significant headgroup reorientation nor a nonmonotonic change in the average lateral cross-sectional area is predicted.