Photocatalytic patterning of monolayers for the site-selective deposition of quantum dots onto TiO2 surfaces

A novel photochemical mechanism is reported for the site-selective deposition of quantum dots onto nanocrystalline TiO2 films. The patterning mechanism involves the combination of surfactant-mediated self-assembly and monolayer photolithography. In the self-assembly process, CdS and CdSe quantum dots were attached to TiO2 surfaces through bifunctional mercaptoalkanoic acid (MAA) linkers. MAAs were adsorbed to the TiO2 surface as the deprotonated carboxylates, primarily through monodentate coordination to Ti4+ sites. CdSe quantum dots were bound to the terminal thiol groups of surface-adsorbed MAAs, with a surface adduct formation constant, Kad, of (2.1 +/- 0.7) x 104 M-1. The color and optical density of the quantum dot-functionalized TiO2 films were tunable. Monolayer photopatterning involved the TiO2-catalyzed oxidative degradation of surface-adsorbed mercaptohexadecanoic acid (MHDA). A mechanism is proposed wherein MHDA degradation occurs through both oxidative decarboxylation and the formation of interchain disulfides. These MHDA photodegradation processes regulate the extent to which CdSe quantum dots adsorb onto the TiO2 surface. Illumination through a photomask yielded optically patterned, quantum dot-functionalized TiO2 films that were characterized by scanning electron microscopy and energy-dispersive X-ray analysis.     

Chemical deposition and characterization of thin polypyrrole films on glass plates: role of organosilane treatment

 Thin chloride-doped polypyrrole films (PPyCl) were deposited chemically onto untreated and silane-treated planar glass plates from aqueous solutions. The organosilanes used to treat the glass substrates were methyltriethoxysilane (Cl), propyltrimethoxysilane (C3), octyltrimethoxysilane (C8) and aminopropyltriethoxysilane (APS). The decreasing order of hydrophobic character of silane-treated glass slides, as measured by water contact angle measurements, was glass–APS ≅ glass–C8 > glass–C3 > glass–C1 > glass. X-ray photoelectron spectroscopy was used to determine the surface chemical composition of the glass plates before and following coating with the silane coupling agents and/or the PPy thin layer, respectively. The attenuation in intensity of the glass Na_{1 s} peak enabled the average thickness of the various organosilane overlayers to be estimated. Atomic force microscopy showed that the morphology of the organosilane overlayers was islandlike. The domains have a structure which depends upon the nature of the organosilane in question. Scanning electron microscope images showed that the morphology of the PPyCl thin films was homogeneous when coated onto glass–APS and glass–C8, but wrinkled at the surface of glass, glass–C1 and glass–C3 plates. Qualitative peel tests using 3M adhesive tape showed very good adhesion of PPyCl to the glass–APS substrate, whereas adhesion was fairly poor in the case of glass–PPy and PPy–alkylsilane–glass interfaces. The results of this multitechnique study suggest that hydrophobic interactions are important to obtain homogeneous and continuous thin PPy films, but Lewis acid–base interactions are the driving forces for strong and durable PPy–glass adhesion. Received: 3 January 2000/Accepted: 19 May 2000     

Nanopatterning of functional materials by gas phase pattern deposition of self-assembled molecular thin films in combination with electrodeposition

We present a general methodology to pattern functional materials on the nanometer scale using self-assembled molecular templates on conducting substrates. A soft lithographic gas phase edge patterning process using poly(dimethylsiloxane) molds was employed to form electrically isolating organosilane patterns of a few nanometer thickness and a line width that could be tuned by varying the time of deposition. Electrodeposition was employed to deposit patterns of Ni and ZnO on these prepatterned substrates. Deposition occurred only on patches of the substrate where no organosilane monolayer was present. The process is simple, inexpensive, and scalable to large areas. We achieved formation of metallic and oxide material patterns with a lateral resolution of 80 nm.     

Optical and morphological characterization of bispyrazole thin films for gas sensing applications

The optical gas recognition capabilities of thin film layer of 4-[bis[(3,5-dimethyl-1H-pyrazol-1-yl)methyl]-amino]phenol deposed on quartz substrates were studied. The dynamic gas responses to the following analytes have been investigated as air pollutants (SO₂, NO₂, CO, CH₄ and NH₃). The spin-coated bispyrazole layer appears to have reversible response towards SO₂ and a very low and irreversible response to NO₂. The selectivity of the thin film based on bispyrazole layer with respect to other analytes was also examined and the present data show that the thin sensing layer in the presence of CO, CH₄ and NH₃ in low concentration does not influence its optical properties.     

Freezing of polymer thin films and surfaces: The small molecular weight puzzle

Experimental observations (ellipsometry, scanning force microscopy, and nuclear magnetic recsonance (NMR)) of the freezing behavior of thin supported films as well as the free surface of atactic polystyrene are reported, taken at a particularly small molecular weight of 2 kg/mol. Remarkably, we find the same effect of reduction of the glass transition temperature, T_g, as observed earlier with much longer molecules. Furthermore, surface melting is observed by NMR, with the molten layer thickness similar to what has been observed with larger molecular weight. We conclude that molecular geometry effects cannot account for these observations, and that a consistent explanation must be presentable in a continuum picture. On the basis of the capillary mode spectrum of the free surface and of the supported films, we present such a model and find that it accounts very consistently with all observations made so far, at least with polystyrene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2968–2979, 2006     

Optimization of large area pulsed laser deposition of YBaCuO thin films by SNMS depth profiling and rutherford backscattering

The scaling up of established deposition techniques like pulsed laser deposition (PLD) to larger substrate diameter is a main condition for the technological application of high-T_c superconducting (HTSC) thin films. SNMS depth profiling and RBS have been used to control the homogeneity of film thickness and stoichiometry of Au/YBaCuO/CeO₂ thin film systems deposited on 3-inch sapphire wafers by PLD. A systematic dependence has been found for the relative SNMS sensitivity factors (RSF) on the structural state of YBaCuO. Therefore, a calculation of the composition of the epitaxial YBaCuO thin films is not possible using RSF determined from polycrystalline YBaCuO target material. The interdiffusion of thin films and substrate has been investigated in dependence on the deposition temperature by SNMS depth profiling. The obtained homogeneity of film thickness and stoichiometry over the entire 3-inch diameter proofs the suitability of PLD for in-situ deposition of 3-inch wafers by YBaCuO thin film systems for microwave applications.     

Fabrication of high performance thin films from metal fluorocomplex aqueous solution by the liquid phase deposition

The hetro-structured oxide thin films from metal fluorocomplex solution have been prepared by the liquid phase deposition (LPD) method. The Pt/Nb₂O₅ and Au/Nb₂O₅ composite films can be prepared from a mixed solution of niobium source, H₃BO₃, Pt(NH₃)₄Cl₂ and HAuCl₄ aqueous solutions under the ambient temperature and atmosphere. In the case of Au/SiO₂ composite film, (NH₄)₂SiF₆ solution is used as a mother solution. The Pt and Au ionic species are deposited in Nb₂O₅ and SiO₂ matrices. They are reduced to their metallic state after treatment above 200 °C. The size of dispersed particles can be controlled by heat treatment temperature. It is also clear that, gold nanoparticles are also found to interact with SiO₂, although the interaction is smaller than that with Nb₂O₅ showing the size of Au nanoparticles remain smaller in Nb₂O₅ that in SiO₂.     

X-ray diffraction area mapping of preferred orientation and phase change in TiO2 thin films deposited by chemical vapor deposition

This paper reports on an investigation into the formation of TiO(2) thin films, whereby X-ray diffraction is used to map systematic changes in preferred orientation and phase observed throughout the films. The key to this strategy is the recording of X-ray diffraction patterns of specific and isolated areas of a substrate, ensuring this specificity by the use of a small X-ray sample illumination area (approximately 3-5 mm(2)). A map of the variation in film composition can then be built up by recording such diffraction patterns at regular intervals over the whole substrate. Two titania films will be presented, grown using atmospheric pressure chemical vapor deposition, at 450 and 600 degrees C, from TiCl(4) and ethyl-acetate precursors. The film grown at 450 degrees C showed a systematic change in preferred orientation, while the film grown at 600 degrees C was composed of a mixture of the rutile and anatase phases of TiO(2) with the ratio of these phases altering with position on the substrate. The results of physical property measurements and electron microscopy carried out on the films are also reported, conducted at locations identified by the X-ray diffraction mapping procedure as having different compositions, and hence different physical responses. We found that the photocatalytic activity and hydrophobicity were dependent on the rutile:anatase ratio at any given location on the film.     

Selective ablation of Xe from silicon surfaces: molecular dynamics simulations and experimental laser patterning

The mechanism of laser-induced removal of Xe overlayers from a Si substrate has been investigated employing MD simulations and evaluated by buffer layer assisted laser patterning experiments. Two distinct regimes of overlayer removal are identified in the simulations of a uniform heating of the Si substrate by a 5 ns laser pulse: The intensive evaporation from the surface of the Xe overlayer and the detachment of the entire Xe overlayer driven by explosive boiling in the vicinity of the hot substrate. Simulations of selective heating of only a fraction of the silicon substrate suggest that the lateral heat transfer and bonding to the unheated, colder regions of the Xe overlayer is very efficient and suppresses the separation of a fraction of the overlayer from the substrate. Interaction with surrounding cold Xe is responsible for significant increase in the substrate temperature required for achieving the spatially selective ablation of the overlayer. The predictions of the MD simulations are found to be in a qualitative agreement with the results of experimental measurements of the threshold laser power required for the removal of Xe overlayers of different thickness and the shapes of metallic stripes generated by buffer-assisted laser patterning.     

Deposition behaviors and patterning of TiO2 thin films on different SAMs surfaces from titanium sulfate aqueous solution

Patterning of TiO₂ thin films was successfully obtained on different self-assembled monolayers (SAMs) in aqueous solution by micro-contact printing (μCP) method. The substrates were immersed in an aqueous solution containing titanium sulfate (Ti(SO₄)₂) and hydrogen peroxide for deposition at 80 °C. The growth rates on various surfaces were as follows: sulfonic (–SO₃H) > amino (–NH₂) > methyl (–CH₃) > hydroxyl (–OH). According to the XPS results, SAMs with the terminal groups of –SO₃H and –NH₂ were favorable for the deposition. The TiO₂ film deposited on the SAM with the terminal group of –CH₃ could be easily peeled off. Clearly, TiO₂ patterns were obtained on the prepatterned surfaces of –SO₃H/–CH₃ and –NH₂/–CH₃ SAMs. The deposition mechanism might be relevant to electrostatic interaction, Stern layer, lone pair electrons and Van der Vaals forces. The TiO₂ film was anatase after annealing at 500 °C and comprised particles with an average diameter of ca. 10 nm.     

Kinetic rules of precipitation of thin films of titanium dioxide from the gas phase containing titanium tetraisopropylate

Precipitation of titanium dioxide layers from the gas phase in the reaction system containing titanium tetraisopropylate and oxygen at the total pressure 1 kPa is studied. It is shown that in the range of 300–500°C the precipitation proceeds in the kinetic regime and is accompanied by the formation of layers of monotonous thickness containing nanocrystalline phases of anatase and rutile. In the temperature range 300–350°C the activation energy value was 92.7 kJ mol^?1, and at higher temperatures (up to 500°C) it decreased to 17.5 kJ mol^?1. The increase in the precipitation temperature caused the increase in relative amount of rutile in the precipitated layers.     

Novel optical techniques for the analysis of polymer surfaces and thin films

Summary We report on novel optical techniques, based on evanescent waves, for the characterization of polymer surfaces and thin films. We first describe photo-ablation studies with polysilane films investigated by surface plasmon microscopy, a technique which is particularly well-suited for ultrathin samples. Thicker films that are homogeneous enough to carry optical waveguide modes can be characterized with high lateral resolution by the recently developed waveguide microscopy. We demonstrate this for a thin film of a solid polyelectrolyte. Finally, we report on surface plasmon field-enhanced Raman-spectroscopic and -imaging investigations of ultrathin Langmuir-Blodgett-Kuhn-layers of cadmium arachidate.W. Hickel is now with HOECHST AG, Angewandte Physik, W-6230 Frankfurt 80     

Ion-induced spectroscopic methods for the analysis of surfaces,interfaces and thin films

A shift is taking place in modern surface and thin-film spectroscopic techniques from the field of surface science in a pure academic sense to problem-oriented applications related to material science and technology. This has been rendered possible and promoted among other things by a number of significant methodological and instrumental developments in ion-induced spectroscopic methods.     

Layer-by-layer growth of metal-metal bonded supramolecular thin films and its use in the fabrication of lateral nanoscale devices

Layer-by-layer self-assembly of metal-metal bonded supramolecules is demonstrated and utilized to fabricate lateral nanoelectronic devices. Mercaptoethylpyridine is used to bind to Au substrates and to template the sequential assembly of alternating layers of redox active dirhodium complexes [Rh2(DAniF)2]2(O2CCH2CO2)2 (DAniF = N,N'-di-p-anisylformamidinate) and conjugated organic ligands trans-1,2-bis(4-pyridyl)ethylene. Optical spectroscopy and atomic force microscopy show that the structure and composition of these thin films are similar to those found in tightly packed single crystals. Electrochemical studies of these films grown on Au substrates reveal a reversible oxidation wave at approximately 406 mV, corresponding to the one electron oxidation of the Rh24+ center. This directed assembly technique has been used to fabricate lateral nano-electronic devices in which the supramolecules span the channels. Tailoring the chemistry of the templating ligand enables assembly on desired surfaces and engineering the chemistry of the supramolecules' dimetal units and coordinating ligands may tune the device characteristics.     

Spinodal dewetting of thin films with large interfacial slip: implications from the dispersion relation

We compare the dispersion relations for spinodally dewetting thin liquid films for increasing magnitude of interfacial slip length in the lubrication limit. While the shape of the dispersion relation, in particular the position of the maximum, are equal for no-slip up to moderate-slip lengths, the position of the maximum shifts to much larger wavelengths for large slip lengths. Here, we discuss the implications of this fact for recently developed methods to assess the disjoining pressure in spinodally unstable thin films by measuring the shape of the roughness power spectrum. For polystyrene (PS) films on octadecyltrichlorosilane (OTS) covered Si wafers (with slip length b approximately 1 microm), we predict a 20% shift of the position of the maximum of the power spectrum which should be detectable in experiments.     

Isolation of ethanol from its aqueous solution by liquid phase adsorption and gas phase desorption using molecular sieving carbon

A novel bioethanol separation process was proposed in this study employing molecular sieving carbon (MSC) as an adsorbent, whose pore diameter is close to molecular size of ethanol. In the proposed process, fermentation broth is first introduced to the adsorption bed packed with MSC. In this step, ethanol is selectively adsorbed onto MSC, with highly enriching ethanol in the micropore of MSC. Subsequently, the concentrated ethanol is desorbed from MSC to gaseous phase, resulting in further purification of ethanol owing to a considerable difference in desorption rate between water and ethanol; Because of molecular sieving effect of MSC, the desorption rate of ethanol is much smaller than that of water. To establish this process, adsorption equilibrium and kinetics of ethanol on various MSCs were investigated in aqueous phase as the first step. Also, desorption kinetics of ethanol and water in gaseous phase were investigated. As a result, it was suggested that highly concentrated ethanol could be obtained with high recovery ratio through these simple operations, meaning the proposed process is quite promising.     

Atomic layer deposition of tungsten(III) oxide thin films from W2(NMe2)6 and water: precursor-based control of oxidation state in the thin film material

The atomic layer deposition of W2O3 films was demonstrated employing W2(NMe2)6 and water as precursors with substrate temperatures between 140 and 240 degrees C. At 180 degrees C, surface saturative growth was achieved with W2(NMe2)6 vapor pulse lengths of >/=2 s. The growth rate was about 1.4 A/cycle at substrate temperatures between 140 and 200 degrees C. Growth rates of 1.60 and 2.10 A/cycle were observed at 220 and 240 degrees C, respectively. In a series of films deposited at 180 degrees C, the film thicknesses varied linearly with the number of deposition cycles. Time-of-flight elastic recoil analyses demonstrated stoichiometric W2O3 films, with carbon, hydrogen, and nitrogen levels between 6.3 and 8.6, 11.9 and 14.2, and 4.6 and 5.0 at. %, respectively, at substrate temperatures of 160, 180, and 200 degrees C. The as-deposited films were amorphous. Atomic force microscopy showed root-mean-square surface roughnesses of 0.7 and 0.9 nm for films deposited at 180 and 200 degrees C, respectively. The resistivity of a film grown at 180 degrees C was 8500 microhm cm.     

Adsorbed surfactants as templates for the synthesis of morphologically controlled polyaniline and polypyrrole nanostructures on flat surfaces: from spheres to wires to flat films

Nanostructures of polyaniline (PAni) and polypyrrole (PPy) with controlled morphologies have been synthesized on atomically flat surfaces using adsorbed surfactant molecules as templates. Atomic force microscopy (AFM) has been used to investigate polymer film formation on highly oriented pyrolytic graphite (HOPG) and chemically modified HOPG. Morphological control over the resulting polymer film is possible by the addition of coadsorbing molecules, manipulation of the length of the surfactant hydrophobe, or by changing the surface chemistry of the adsorbing substrate. Phase transitions between spheres, cylinders/wires, and featureless films have been observed which exactly parallel transitions between spheres, cylinders, and flat layers in the adsorbed surfactant. Parallel arrays of PAni nanowires can be synthesized with alignment evident over large areas in a simple self-assembly technique in which fabrication and arrangement take place simultaneously. Such a technique in which one can engineer sub-100-nm-ordered nanoscale pi-conjugated polymer structures of a desired shape by a simple self-assembly process presents potential as templates, sensors, and microelectronic devices.     

Self-assembly of perylenediimide and naphthalenediimide nanostructures on glass substrates through deposition from the gas phase

Micrometer-long nanobelt and nanowires from deposition of perylenediimide (PTCDI) and naphthalenediimide (NPDI) in glass substrates from the gas phase were demonstrated. The electron diffraction pattern of PTCDI shows that the PTCDI molecules are oriented with their long axis perpendicular to the belt and the pi-pi stacking direction parallel to the belt. No crystal structure of the NPDI nanowires was observed. This is a new strategy to assemble organic molecules to nanostructures, typically for those having very low solubility in solvents. The approach would completely eliminate the effect of side chains.