Phase formation in the ZrO(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>-H<Subscript>3</Subscript>PO<Subscript>4</Subscript>-CsF-H<Subscript>2</Subscript>O system at low concentration of the phosphorus-containing component

The ZrO(NO₃)₂-H₃PO₄-CsF-H₂O system was studied at 20°C along the section at a molar ratio of PO₄³⁻/Zr = 0.5 (which is of the greatest interest in the context of phase formation) at ZrO₂ concentrations in the initial solutions of 2–14 wt % and molar ratios of CsF: Zr = 1−6. The following compounds were isolated for the first time: crystalline fluorophosphates CsZrF₂PO₄ · H₂O, amorphous oxofluorophosphate Cs₂Zr₃O₂F₄(PO₄)₂ · 3H₂O, and amorphous oxofluorophosphate nitrate CsZr₃O_1.25F₄(PO₄)₂(NO₃)_0.5 · 4.5H₂O. The compound Cs₃Zr₃O_1.5F₆(PO₄)₂ · 3H₂O was also isolated, which forms in a crystalline or glassy form, depending on conditions. The formation of the following new compounds was established: Cs₂Zr₃O_1.5F₅(PO₄)₂ · 2H₂O, Cs₂Zr₃F₂(PO₄)₄ · 4.5H₂O, and Zr₃O₄(PO₄)_1.33 · 6H₂O, which crystallize only in a mixture with known phases. All the compounds were studied by X-ray powder diffraction, crystal-optical, thermal, and IR spectroscopic analyses.     

Thermal Decomposition of the System CO(NH<Subscript>2</Subscript>)<Subscript>2</Subscript>-H<Subscript>3</Subscript>PO<Subscript>4</Subscript> in the Presence of Nitrate Compounds

Chemical, derivatographic, IR spectral, and X-ray diffraction analyses were used to study thermal transformations in the system CO(NH₂)₂-H₃PO₄ and in the same system with addition of KNO₃, CsNO₃, LiNO₃ · 3H₂O, and NH₄NO₃ salts in the temperature range 20–600°C. The influence of the chosen nitrate compounds on the process of reorganization of the constituent ingredients, evolution of nitrogen into the gas phase, yield of the solid residue, and preservation of nitrogen and phosphorus was revealed.     

Effect of CuO–Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> on low temperature sintered MnZn-ferrite by sol–gel auto-combustion method

A sol–gel auto-combustion method was investigated to incorporate small amounts of additives of Cu and Bi uniformly into soft magnetic MnZn-ferrite nanoparticles, which were prepared by Fe(NO₃)₃·9H₂O, Mn(NO₃)₂ and Zn(NO₃)₂·6H₂O dissolved in water and citric acid. The powder was characterized by the X-ray diffraction analysis and transmission electron microscope method. The effects of nano-particle sized powders in microstructure development and adding CuO–Bi₂O₃ into MnZn-ferrite on phase formation, densification process as well as magnetic properties were studied by scanning electron microscope and vibrating sample magnetometer techniques. The sample without additive can be sintered well at 930 °C, while the samples with a small amount of the additive can be sintered at less than 900 °C. Obviously, the micron-sized powders exhibited high sintering activity. It was also found that CuO–Bi₂O₃ additive promoted the growth of grains and improved magnetic properties. The permeability and the saturation magnetization were improved substantially by adding CuO–Bi₂O₃ into MnZn-ferrite and the sintering temperature was lowered to 875 °C, which may be associated with the redistribution of cations on the tetrahedral (A) sites and octahedral (B) sites within the spinel lattice.     

FTIR-ATR <Emphasis Type="Italic">in situ</Emphasis> observation on the efflorescence and deliquescence processes of Mg(NO<Subscript>3</Subscript>)<Subscript>2</Subscript> aerosols

The efflorescence and deliquescence processes of Mg(NO₃)₂ aerosol particles deposited on ZnSe substrate have been investigated through in situ Fourier transform infrared-attenuated total reflection (FTIR-ATR) technique at the molecular level. At relative humidity (RH) of ∼3%, Mg(NO₃)₂ particles existed as amorphous states. The amorphous Mg(NO₃)₂ particles were transformed into crystalline Mg(NO₃)₂ · nH₂O (n ≤ 5) with slight increasing of RH. Thermodynamically stable Mg(NO₃)₂·6H₂O crystals were gradually formed on the particle surface and started to be dissolved at the saturation point (∼53% RH). At the same time, a continuous phase transition from Mg(NO₃)₂ · nH₂O (n≤5) to Mg(NO₃)₂·6H₂O occurred on the particle surface. This led the solid particles to completely deliquesce at 76% RH, which was much higher than the saturation point of 53% RH. In the efflorescence process, Mg(NO₃)₂ droplets entered into the supersaturated region due to the gradual evaporation of water. Finally, amorphous particles were formed when RH decreased below 5%. In the FTIR-ATR spectra of the supersaturated Mg(NO₃)₂ droplets, the absorbance of the symmetric stretching vibration of NO ₃ ⁻ (v ₁- NO ₃ ⁻ ) clearly became stronger. It resulted from the continuous formation of solvent share ion pairs (SIPs), and even the contact ion pairs (CIPs) between Mg²⁺ and NO ₃ ⁻ . Supported by the Trans-Century Program Foundation for the Talents by the Ministry of Education of China, the National Natural Science Foundation of China (Grant Nos. 20073004, 20473012, and 20673010), the 111 Project (B07012), and the State Key Laboratory of Physical Chemistry for Solid Surface of Xiamen University     

Synthesis characterization and catalytic evaluation of Ni/ZrO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> aerogels catalysts

The Ni/ZrO₂/SiO₂ aerogels catalysts were synthesized via three different routes: (i) impregnation ZrO₂–SiO₂ composite aerogels with a aqueous solution of Ni(NO₃)₂, (ii) impregnation SiO₂ aerogels with a mixed aqueous solution of Ni(NO₃)₂ and ZrO(NO₃)₂ · 2H₂O, (iii) one-pot sol–gel procedure from precursors Ni(NO₃)₂/ZrO(NO₃)₂ · 2H₂O/Si(OC₂H₅)₄. These catalysts were characterized by X-ray diffraction (XRD), temperature-programmed reduction (TPR), ammonia temperature-programmed desorption (NH₃-TPD), N₂ adsorption–desorption isotherms and Fourier transform infrared (FT-IR). The Liquid-phase hydrogenation of maleic anhydride (MA) was performed over these catalysts. The results revealed that the different preparation routes result in a difference between the obtained samples, concerning the crystal structure and composition, surface acidity, mixed level of each component, texture, and catalytic selectivity.     

Coordination characteristics of trivalent lanthanides and actinides in molten hydrate salts of Ca(NO<Subscript>3</Subscript>)<Subscript>2</Subscript> and CaCl<Subscript>2</Subscript>

Distribution behavior of Ce(III), Am(III), and Cm(III) between tri-n-butyl phosphate solution and molten calcium nitrate hydrate Ca(NO₃)₂·RH₂O or molten calcium chloride hydrate CaCl₂·RH₂O was studied radiochemically. In Ca(NO₃)₂·RH₂O systems, maximum separation factors of Ce and Cm to Am were observed to be 12 (Ce/Am) and 1.7 (Cm/Am). The distribution ratios of these elements increased with the decrease of water activity in the hydrates, and the extractabilities at the water deficient region was less sensitive compared to those at the water abundant region. This trend was similar to the coordination circumstance change observed in electronic absorption spectra of Nd(III) in the hydrates.     

Glass formation in the Al<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript>-Al(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system

Glass formation boundaries in the Al₂(SO₄)₃-Al(NO₃)₃-H₂O system were determined. IR spectra were studied. Schemes of structural rearrangements within the boundaries of a second glass formation region in the Al(NO₃)₃-H₂O binary subsystem are suggested. A structure is suggested for glassy Al(NO₃)₃H₂O.     

Structural and thermal studies on the solid products in the system MnSeO<Subscript>3</Subscript>-SeO<Subscript>2</Subscript>-H<Subscript>2</Subscript>O

The solubility of MnSeO₃-SeO₂-H₂O system was studied in the temperature region 25–300°C. The compounds of the three-component system were identified by the Schreinemaker’s method. The phase diagram of manganese(II) selenites was drawn and the crystallization fields for the different phases were determined. Depending on the conditions for hydrothermal synthesis, MnSeO₃·H₂O, MnSeO₃·3/4H₂O, MnSeO₃·l/3H₂O and MnSe₂O₅ were obtained. The different phases were proven and characterized by chemical, powder X-ray diffraction and thermal analyses, as well as IR spectroscopy. The kinetics of dehydration and decomposition of MnSeO₃·H₂O was studied under non-isothermal heating. Based on 4 calculation procedures and 27 kinetic equations, the values of activation energy and pre-exponential factor in Arrhenius equation were calculated for both processes.     

Preparation of CuCr<Subscript>2</Subscript>O<Subscript>4</Subscript> nanopowders using two different chromium sources

CuCr₂O₄ spinel powders were synthesized starting from different chromium sources, namely (i) chromium oxide (α-Cr₂O₃) and (ii) ammonium dichromate ((NH₄)₂Cr₂O₇). The copper source was a Cu(II) carboxylate-type complex. The Cu(II) carboxylate complex was obtained by the redox reaction between Cu(NO₃)₂·3H₂O and 1,3-propanediol (1,3PG) at 130 °C. In the first case (i), we have started from a mixture of α-Cr₂O₃, Cu(NO₃)₂·3H₂O and 1,3PG that upon heating formed the copper malonate complex, which decomposed around 220 °C forming an oxide mixture (CuO + α-Cr₂O₃). In the second case (ii), (NH₄)₂Cr₂O₇, Cu(NO₃)₂·3H₂O and 1,3PG were homogenously mixed. Heating this mixture at 130 °C resulted, in situ, in the Cu(II) complex. On controlled temperature increase, the violent decomposition of (NH₄)₂Cr₂O₇ took place at 180 °C along with the decomposition of the Cu(II) complex, leading to an amorphous oxide mixture of Cr₂O_3+x and CuO. By annealing the samples in the temperature range 400–1000 °C, the spinel phase (CuCr₂O₄) was obtained in both cases: (i) at 800 °C and (ii) at 600 °C as a result of the interactions between the precursors used, when the oxide system was amorphous and highly reactive. The presence of CuCr₂O₄ was highlighted by XRD and FTIR analyses.     

Synthesis of La<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>7</Subscript> by thermal treatment of mechanically activated salt mixture

A lanthanum zirconate La₂Zr₂O₇ was synthesized by soft mechanochemical method using zirconium oxynitrate ZrO(NO₃)₂·6H₂O and lanthanum carbonate La₂(CO₃)₃·8H₂O as reagents. Mechanical activation of the reagents was carried out in a centrifugal planetary ball mill. The processes occurring during calcination of the jointly and the separately mechanically activated salt mixture were studied using DSC, TG coupled with mass spectrometry, XRD analysis, and FTIR spectroscopy. It was shown that in the course of joint mechanical activation in the mill alongside with intimate mixing of the reagents and their amorphization exchange reaction occurred, producing lanthanum nitrate, basic lanthanum nitrate, basic zirconium carbonate, and hydrated zirconium oxide. The DSC curve of the jointly mechanically activated salt mixture showed a strong exothermic peak at 878 °C which was not associated with mass loss. This peak was attributed to La₂Zr₂O₇ crystallization in agreement with XRD data. Nanocrystalline lanthanum zirconate synthesized by annealing of the jointly mechanically activated salt mixture was characterized using XRD analysis, scanning, and transmission electron microscopy.     

Monolithic FeO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts for ammonia oxidation and nitrous oxide decomposition

(1.2–8.3)%FeO_х/Al₂O₃ monolith catalysts have been prepared by impregnating alumina with aqueous solutions of iron(III) nitrate and oxalate and have been tested in NH₃ oxidation and in the selective decomposition of N₂O in mixtures resulting from ammonia oxidation over a Pt–Rh gauze pack under conditions of nitric acid synthesis (800–900°C). In the case of the support calcined at 1200°C, the catalyst is dominated by bulk Fe₂O₃ particles localized on the Al₂O₃ surface. The activity of these samples in both reactions decreases with a decreasing active component content, thus limiting the potential of Fe₂(C₂O₄)₃ · 5H₂O, an environmentally friendlier but poorly soluble compound, as a substitute for Fe(NO₃)₃ · 9H₂O. Decreasing the support calcination temperature to 1000°C or below leads to the formation of a highly defective Fe–Al–O solid solution in the (1.2–2.7)%FeO_х/Al₂O₃ catalysts. The surface layers of the solid solution are enriched with iron ions or stabilize ultrafine FeO_х particles. The catalytic activity of these samples in both reactions is close to the activities measured for ~8%FeO_х/Al₂O₃ samples prepared using iron nitrate.     

Hydrothermal synthesis and thermodynamic properties of 2CaO·3B<Subscript>2</Subscript>O<Subscript>3</Subscript>·H<Subscript>2</Subscript>O

2CaO·3B₂O₃·H₂O which has non-linear optical (NLO) property was synthesized under hydrothermal condition and identified by XRD, FTIR and TG as well as by chemical analysis. The molar enthalpy of solution of 2CaO·3B₂O₃·H₂O in HCl·54.572H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HCl·54.501H₂O and of CaO in (HCl+H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(5733.7±5.2) kJ mol⁻¹ of 2CaO·3B₂O₃·H₂O was obtained. Thermodynamic properties of this compound were also calculated by a group contribution method.     

Synthesis,structure and thermal decomposition of [Ni(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>][VO(O<Subscript>2</Subscript>)<Subscript>2</Subscript>(NH<Subscript>3</Subscript>)]<Subscript>2</Subscript>

The compound [Ni(NH₃)₆][VO(O₂)₂(NH₃)]₂ was prepared and characterized by elemental analysis and vibrational spectra. The single crystal X-ray study revealed that the structure consists of [Ni(NH₃)₆]²⁺ and [VO(O₂)₂(NH₃)]⁻ ions. As a result of weak interionic interactions V′···O_p (O_p-peroxo oxygen), ([VO(O₂)₂(NH₃)]⁻)₂ dimers are formed in the solid-state. The thermal decomposition of [Ni(NH₃)₆][VO(O₂)₂(NH₃)]₂ is a multi-step process with overlapped individual steps; no defined intermediates were obtained. The final solid products of thermal decomposition up to 600°C were Ni₂V₂O₇ and V₂O₅.     

Supramolecular 2D structure of [Co(2-Me-Pyz)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>4</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

The complex [Co(2-Me-Pyz)₂(H₂O)₄](NO₃)₂ is synthesized and its structure is determined. The crystals are monoclinic: space group P2₁/n, a = 10.685(2) Å, b = 6.837(1), c = 12.515(3) Å, β = 91.84(3)°, V = 913.8(3) ų, ρ_calcd = 1.042 g/cm ³, Z = 2. The Co²⁺ ion (in the inversion center) is coordinated at the vertices of the distorted octahedron by two nitrogen atoms of methylpyrazine and four oxygen atoms of the water molecules (Co(1)–N(1) 2.180(3), average Co(1)–O(w) 2.079(3) Å, angles at the Co atom 87.9(1)–92.1(1)°). Supramolecular pseudometallocycles are formed in the structure through the O(w)–H…N(1) hydrogen bonds between the coordinated H₂O molecules and the terminal nitrogen atoms of the 2-methylpyrazine molecules. Their interaction results in the formation of supramolecular layers joined by the NO₃ groups into a three-dimensional framework.     

Behavior of silver sulfide in the system Ag<Subscript>2</Subscript>S-Fe(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>-HNO<Subscript>3</Subscript>-H<Subscript>2</Subscript>O

Behavior of silver sulfide in the system Ag₂S-Fe(NO₃)₃-HNO₃-H₂O was studied at 25, 55, and 80°C using the method of the simplex-lattice experiment design. The quantitative dependences of Ag₂S oxidation on the concentrations of the acid and Fe³⁺ were determined. The isoconcentration diagrams were obtained.     

Effect of cerium dioxide on the properties of monolithic CuO-ZnO-CeO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/cordierite catalysts in methanol decomposition

Cerium dioxide as a component of CuO-ZnO-CeO₂/Al₂O₃/cordierite catalysts stabilizes their action in the decomposition of methanol by preventing carbon deposition on the surface and facilitating hydrogen formation with selectivity and yield in the range 85–96%. The optimal indices for this reaction are obtained for a CeO₂-CuO/Al₂O₃/cordierite sample prepared using an ammonium precursor for cerium, (NH₄)₂Ce(NO₃)₆. This catalyst displays enhanced reductive capacity relative to the analogous CeO₂-CuO composition prepared using Ce(NO₃)₃·6H₂O.     

Oxonitrates VO(NO<Subscript>3</Subscript>)<Subscript>3</Subscript> and MoO<Subscript>2</Subscript>(NO<Subscript>3</Subscript>)<Subscript>2</Subscript> and nitronium and nitrosonium nitratometallates as nitrating agents

Dissolution of vanadium in anhydrous HNO₃ followed by exposure of the solution in a dessicator over P₂O₅ gave liquid vanadyl trinitrate (I). The X-ray diffraction analysis of I was carried out for a single crystal grown on cooling the liquid in a sealed capillary. The structure is composed of VO(NO)₃ molecules in which the V atom has an unusually high C.N. 7; it coordinates the terminal O atom and three bidentate nitrate groups to form a distorted pentagonal bipyramid as the coordination polyhedron with the terminal O atom occupying one axial vertex. Using the GAMESS program package, ab initio calculation of the structure of VO (NO₃)₃ in the liquid phase was carried out. It was shown that in all three physical states, vanadyl trinitrate retains its molecular structure almost invariable. Toluene and naphthalene nitration using I and (NO₂)[Fe(NO₃)₄], NO[Cu(NO₃)₃], (NO)_3/4(NO₂)_1/4[Zr(NO₃)₅], and MoO₂(NO₃)₂ proceeds at high rates at low temperatures to give an unusually high para-nitrotoluene percentage in the products as compared with the ortho-isomer. The activity of the studied compounds in the nitration of naphthalene decreases in the series VO(NO₃)₃ > (NO)_3/4(NO₂)_1/4[Zr(NO₃)₅] > MoO₂(NO₃)₂.     

Thermal behaviour of [Mg(DMSO)<Subscript>6</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

Polymorphism and thermal decomposition of [Mg(DMSO)₆](NO₃)₂, where DMSO =(CH₃)₂SO, were studied by differential scanning calorimetry (DSC) and thermogravimetry (TG). The gaseous products of the decomposition were on-line identified by a quadruple mass spectrometer (QMS). Three phase transitions have been detected for this compound in the temperature range of 95–370 K between the following solid phases: stable KIb↔stable KIa at T _C3=195 K, metastable KII↔supercooled K0 at T _C2=230 K and stable KIa→stable K0 at T _C1=337 K. Thermal decomposition of the title compound proceeds in three main stages. In the first stage, which starts just above ca. 380 K, and is continued up to ca. 540 K, the compound loses in two steps four DMSO molecules per one formula unit and undergoes into [Mg(DMSO)₂](NO₃)₂. The second stage starts just immediately after liberating four DMSO ligands and is connected with the decomposition of [Mg(DMSO)₂](NO₃)₂ and the formation of a mixture of solid anhydrous magnesium sulfate, magnesium nitrate and magnesium oxide and also a mixture of gaseous products of the DMSO and Mg(NO₃)₂ decomposition. The third and the last stage corresponds to the decomposition of not decomposed yet magnesium nitrate and formation of magnesium oxide, nitrogen oxides and oxygen.     

Synthesis of phases of composition PbNb<Subscript>2</Subscript>O<Subscript>6</Subscript> and BaNb<Subscript>2</Subscript>O<Subscript>6</Subscript> with the use of active precursors

Low-temperature method for synthesis of phases of composition PbNb₂O₆ and BaNb₂O₆ and solid solutions based on these phases was developed using the results obtained in a study of the interaction of α-Nb₂O₅·xH₂O with PbO·xH₂O and Ba(OH)₂.     

Crystal structure of bis(semicarbazido)copper(II) nitrate [Cu(NH<Subscript>2</Subscript>NHC(O)NH<Subscript>2</Subscript>)<Subscript>2</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

The crystal structure of bis(semicarbazido)copper(II) nitrate [Cu(NH₂NHC(O)NH₂)₂](NO₃)₂ has been studied by X-ray diffraction. Monoclinic crystals, a = 6.835(2) Å, b = 7.733(2) Å, c = 10.320(3) Å, β = 105.701(3)°, V = 525.1(2) ų, space group P2₁/c, Z = 2, d _msd = 2.136 g/cm³, μ(MoK _α) = 2.143 mm⁻¹. The structure was solved with the program for automatic analysis of Patterson’s function and refined by full-matrix least squares in an anisotropic approximation for all non-hydrogen atoms using 753 independent reflections; R ₁ = 0.0203. The square environment of the Cu atom is formed from the amino nitrogen atoms of the hydrazine fragments and the C=O oxygen atoms of the two semicarbazide bidentate molecules (Cu-N 1.928 Å, Cu-O 1.999 Å). The axial positions are occupied by the O atoms of the NO ₃ ⁻ outer-spheric anions (Cu-O 2.505 Å). In the structure, the complex cations and the NO ₃ ⁻ anions are linked into a framework by N-H...O type hydrogen bonds. Original Russian Text Copyright ? 2007 by G. V. Romanenko, Z. A. Savelieva, and S. V. Larionov __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 48, No. 2, pp. 370–373, March–April, 2007.