聚酰胺-胺树形大分子吸附分离材料的构筑及应用研究进展

聚酰胺-胺(PAMAM)树形大分子具有高度支化的分子结构和丰富的叔胺、酰胺和氨基等功能基团,且各功能基团随树形大分子代数增加呈规律性增加和排布,为吸附位点的集中、层次性分布提供了理想的模板。同时,PAMAM树形大分子具有良好的水溶性、稳定性和pH响应性,可通过调控树形大分子的代数、中心核、外层端基以及溶液pH等提升其对不同水体环境的适应性及对目标物的选择性吸附分离性能,因此,以PAMAM树形大分子构筑吸附分离材料在金属离子、染料、生物分子和药物分子以及CO2的吸附分离领域具有重要应用。本文对PAMAM树形大分子吸附分离材料的构筑及应用研究进展进行了全面总结,并展望了该类材料未来的应用前景和发展方向。     

树形大分子/金属配合物及其纳米复合材料的制备与性能研究进展

树形大分子是具有确定代数和末端基的蓬勃发展的新型合成高分子。大量具有不同的中心核、支链和末端基团的树形大分子已经被合成和应用于不同的领域,其功能化和应用是目前树形大分子研究领域的热点。本文综述了树形大分子/金属配合物及其纳米复合材料的制备与性能的研究进展,重点介绍了树形大分子/金属配合物材料和树形大分子/金属纳米复合材料的制备与性能研究的最新进展。     

树形大分子基药物传输系统结合强度及构型的分子动力学研究

采用全原子分子动力学方法系统研究了聚酰胺(PAMAM)型树形大分子非共价搭载4种抗癌药物分子(CE6,DOX,MTX及SN38)的药物传输复合体系.考察了药物分子种类、数量及树形大分子的代数和聚乙二醇化表面修饰对复合体系的结合强度、尺寸及溶剂中扩散行为的影响.研究发现,PAMAM自身变形能对药物-PAMAM间的结合有重要影响.搭载较多的药物分子可以使PAMAM自身增大,但同样搭载条件下经过聚乙二醇化修饰过的PAMAM变化并不明显.PAMAM分子表面的聚乙二醇化可以更高的强度结合更多的药物分子,并减缓其扩散速度,因而提高药物分子的搭载效率和体内滞留时间.为新型树形大分子基药物传输体系的设计提供理论依据.     

树枝状大分子聚酰胺-胺的荧光特性

聚酰胺-胺( PAMAM) 树形大分子是近年来得到迅速发展的一类新型聚合物,其独特结构、功能化和应用价值引起了化学家们的极大研究兴趣.并在多个领域显示出良好的应用前景.近来又发现(PAMAM)在适当的pH值条件下发射较强的荧光,本文主要介绍了PAMAM对荧光物质的增强作用,PAMAM作为模板制备纳米粒子中的荧光效应,以及PAMAM自身荧光的发现及对其荧光机理的研究,并对PAMAM的荧光应用进行了展望.PAMAM 树型大分子由于具有良好的生物相容性、优异的能量转移机制等,有可能成为新型的生物荧光标记物.     

树形聚酰胺胺与 Cu2＋的络合作用

合成了4.0代聚酰胺胺 (PAMAM)树形分子 ,并合成出端基为羟基的PAMAM树形分子衍生物。用分光光度法研究了4.0代PAMAM树形分子及其衍生物与Cu2 的络合作用。结果表明当存在树形聚酰胺胺分子时 ,Cu2 水溶液的最大吸收波长显著紫移 ,随n(Cu2 )/n(PAMAM)增加 ,最大吸收波长红移 ;PAMAM树形分子与Cu2 的络合作用有多种形式 ,对端胺基树形分子主要存在Cu -N4 和Cu -N2 两种配位方式 ;对端羟基树形分子主要存在Cu -N2 的配位方式 ;随Cu2 的加入 ,络合形式和各种络合形式的相对比例发生变化 ;pH对络合形式有较大影响;随代数的增加 ,树形分子所能络合Cu2 的最大数目不断增加 ,但理论值与实验值有一定的误差     

以乙二胺为核心的聚酰胺-胺树形高分子的合成及毛细管电泳分离研究

在-30℃下合成了1．0G～6.0G聚酰胺．胺(PAMAM)树形高分子,并采用核磁共振、元素分析对其进行了表征;采用毛细管电泳对1．0GPAMAM进行了分离。结果表明：在该温度下合成的PAMAM具有较好的结构完整性,而毛细管电泳是一种有效的分离提纯PAMAM树形高分子的方法。     

树形聚酰胺胺与Cu^2＋的络合作用

合成了4．0代聚酰胺胺（PAMAM）树形分子,并合成出端基为羟基的PAMAM树形分子衍生物,用分光光度法研究了4．0代PAMAM树形分子及其衍生物与Cu^2 的络合作用,结果表明当存在树形聚胺胺分子时,Cu2 水溶液的最大吸收波长显著紫移,随n(Cu2 )/n(PAMAM)增加,最大吸收波长红移,PAMAM树形分子与Cu2 的络合作用有多种形式,对端胺基树形分子主要存在Cu-N4和Cu-N2两种配位方式;对端羟基树形分子主要存在Cu-N2的配位方式,随Cu2 的加入,络合形式和各种络合形式的相对比例发生变化,PH对络合形式有较大影响;随代数的增加,杩形分子所能络合Cu2 的最大数目不断增加,但理论与实验值有一定的误差。     

AgBr纳米簇：PAMAM树形分子模板法制备及光催化性能研究

以酯端基聚酰胺-胺(PAMAM)树形分子为模板，原位制备了AgBr纳米簇。由于酯端基的半代PAMAM树形分子起到“内模板”作用，制得的AgBr纳米簇粒径小、尺寸分布窄、稳定性好，并通过改变Ag⁺∶PAMAM树形分子的物质的量的比可以精确控制纳米簇的尺寸。AgBr纳米簇/树形分子纳米复合材料在光催化降解甲基橙方面具有很好的催化能力，且随纳米簇的尺寸减小，其催化能力增强。     

不同代PAMAM树状大分子与牛血清白蛋白的相互作用研究

采用发散法合成了以乙二胺为核的聚酰胺-胺型(PAMAM)树状大分子,并应用荧光光谱法研究了生理条件下(pH=7.4)3.0代(G3.0)、3.5代(G3.5)和4.0代(G4.0)PAMAM树状大分子与牛血清白蛋白(BSA)的相互作用.结果表明,三种PAMAM树状大分子都能引起牛血清白蛋白荧光猝灭,其程度主要取决于各自末端基团的性质,猝灭机制属于静态猝灭.G4.0PAMAM,G3.5PAMAM和G3.0PAMAM与BSA的猝灭常数分别为2.73,1.69,1.55L·mmol-1.同时考察了体系pH值及离子强度的变化对PAMAM与BSA相互作用的影响.此外,同步荧光和紫外光谱法(UV)以及红边激发荧光位移(REES)等方法的研究结果表明,PAMAM树状大分子的存在改变了BSA的构象.     

聚酰胺-胺树状大分子的应用

聚酰胺-胺(PAMAM)树状大分子是目前树状大分子化学中研究较为成熟的一类，是三种已经商品化的树状大分子之一，其功能化和应用是目前树状大分子领域的热点。PAMAM已在多个领域显示出良好的应用前景。本文主要对PAMAM在表面活性剂、催化剂、纳米复合材料、金属纳米材料、膜材料、导电材料等方面的应用进行评述。     

Microwave Synthesis and Characterization of a Silver–Poly (Amide Amine) Dendrimer Nanocomposite with Application as a Hydrogen Peroxide Sensor

A novel procedure to fabricate a nonenzymatic hydrogen peroxide sensor was developed based on a silver-poly (amide amine) dendrimer nanocomposite synthesized by a microwave procedure. The formation of silver nanoparticles functionalized with the poly (amide amine) dendrimer was confirmed by ultraviolet visible spectroscopy, high resolution transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The electroanalytical properties of a glassy carbon electrode modified with the silver-poly (amide amine) dendrimer nanocomposite were evaluated by the determination of hydrogen peroxide. The electrochemical sensor exhibited rapid response and high sensitivity to hydrogen peroxide with a linear dynamic range from 1.0 × 10–5 to 3.7 × 10–3 molar (r = 0.998) and a limit of detection of 5.06 micromolar. The sensitivity was 30.24 microampere · per millilmolar per square centimeter and the response time was three seconds at a working potential of ?0.35 volt. In addition, the sensor was unaffected by the presence of ascorbic acid, citric acid, and oxalic acid. These results indicate that the silver-poly (amide amine) dendrimer nanocomposite based sensor has application for the determination of hydrogen peroxide.     

Surface-immobilized PAMAM-dendrimers modified with cationic or anionic terminal functions: physicochemical surface properties and conformational changes after application of liquid interface stress

Functionalization of surfaces with highly branched dendrimer molecules has gained attractiveness for various applications because the number of functional groups exceeds those of surfaces functionalized with self-assembled monolayers. So far, little is known about the physicochemical properties of dendrimer functionalized surfaces, especially if the flexibility of dendrimer structure remains after covalent immobilization. Therefore, the purpose of this study was to covalently immobilize polyamidoamine (PAMAM) dendrimer molecules exhibiting terminal amine and carboxyl groups to silicon model surfaces and to explore their properties and structure at the solid-air and solid-liquid interface. Our results show that the surface free energy is higher for PAMAM coatings than for analogously terminated SAMs and also higher for carboxyl than amine functionalized coatings. Furthermore, several findings suggest that conformational freedom of the dendrimers was preserved after surface immobilization. Wet compared to dry PAMAMNH(2) surfaces show reduced hydrophilicity and increased contact angle hysteresis, whereas PAMAMCOOH surfaces become more hydrophilic and showed decreased hysteresis. Streaming current measurements showed an unexpected behavior for PAMAMCOOH surfaces in that they reveal a net positive surface charge over a wide pH range in spite of the carboxylated periphery. All of these results indicate a certain degree of masking, burrowing, back-folding and unfolding of functional groups upon environmental changes.     

Copper-free click conjugation of methotrexate to a PAMAM dendrimer platform

The synthesis of a generation 5 (G5) poly(amidoamine) (PAMAM) dendrimer platform having cyclooctyne ligands that were subsequently be used for a copper-free Huisgen 1,3-dipolar cycloaddition (click reaction) with azido modified methotrexate is described. The G5 PAMAM dendrimer was first partially (70%) acetylated and then coupled with 20 cyclooctyne ligands through amide bonds. The remaining primary amine groups on the dendrimer surface were neutralized by acetylation. The platform was then ‘clicked’ with different numbers (5, 10, and 17) of γ-azido functionalized methotrexate. The copper-free click reactions were stoichiometric with excellent yields.     

Construction of a well-defined multifunctional dendrimer for theranostics

A dendrimer-based building block for theranostics was designed. The multifunctional dendrimer is polyamide-based and contains nine azide termini, nine amine termini, and fifty-four terminal acid groups. Orthogonal functionalization of the multifunctional dendrimer with a near-infrared (NIR) cyanine dye afforded the final dendrimer that shows fluorescence in the NIR region and no toxicity toward T98G human cells. The synthetic strategy described here might be promising for fabricating the next generation of materials for theranostics.     

聚酰胺-胺树形分子荧光性能研究及其在指纹识别领域应用初探

研究了不同温度、浓度、pH值条件下,不同代数、不同端基类型(酯端基和胺端基)的PAMAM(聚酰胺-胺)树形分子的强荧光发射性能.PAMAM树形分子发射强荧光是沿树形结构方向的酰胺基团中的n→π^*跃迁和其密实的球状结构共同作用的结果.树形分子的荧光强度在低pH值或者低温条件下大幅度提高,并且在稀溶液中与浓度成线性关系,在高浓度或者高代数条件下逐渐偏离线性关系.本文还对上述规律的内在机理进行了研究:第一,低pH值条件下,PAMAM树形分子内的叔胺基被氢离子质子化,酰胺荧光发射中心和叔胺基团之间的光诱导电子转移作用被抑制,甚至中断,因此荧光强度急剧升高;第二,随着温度升高,PAMAM树形分子的去活作用增强,荧光强度降低;第三,浓度超过临界点浓度后,由于浓度消光作用,PAMAM树形分子的荧光强度不再随浓度增加而线性增强.最后,将PAMAM树形分子水溶液用于锡纸上油印潜指纹的识别,经处理后的指纹在365 nm紫外光的激发下发射出蓝色荧光,潜指纹被成功地清晰识别.     

Dendritic chelating agents. 1. Cu(II) binding to ethylene diamine core poly(amidoamine) dendrimers in aqueous solutions

This paper describes an investigation of the uptake of Cu(II) by poly(amidoamine) (PAMAM) dendrimers with an ethylenediamine (EDA) core in aqueous solutions. We use bench scale measurements of proton and metal ion binding to assess the effects of (i) metal ion-dendrimer loading, (ii) dendrimer generation/terminal group chemistry, and (iii) solution pH on the extent of binding of Cu(II) in aqueous solutions of EDA core PAMAM dendrimers with primary amine, succinamic acid, glycidol, and acetamide terminal groups. We employ extended X-ray absorption fine structure (EXAFS) spectroscopy to probe the structures of Cu(II) complexes with Gx-NH2 EDA core PAMAM dendrimers in aqueous solutions at pH 7.0. The overall results of the proton and metal ion binding measurements suggest that the uptake of Cu(II) by EDA core PAMAM dendrimers involves both the dendrimer tertiary amine and terminal groups. However, the extents of protonation of these groups control the ability of the dendrimers to bind Cu(II). Analysis of the EXAFS spectra suggests that Cu(II) forms octahedral complexes involving the tertiary amine groups of Gx-NH2 EDA core PAMAM dendrimers at pH 7.0. The central Cu(II) metal ion of each of these complexes appears to be coordinated to 2-4 dendrimer tertiary amine groups located in the equatorial plane and 2 axial water molecules. Finally, we combine the results of our experiments with literature data to formulate and evaluate a phenomenological model of Cu(II) uptake by Gx-NH2 PAMAM dendrimers in aqueous solutions. At low metal ion-dendrimer loadings, the model provides a good fit of the measured extent of binding of Cu(II) in aqueous solutions of G4-NH2 and G5-NH2 PAMAM dendrimers at pH 7.0.     

Conformation and distribution of groups on the surface of amphiphilic polyether-co-polyester dendrimers: effect of molecular architecture

Amphiphilic polyester-co-polyether (PEPE) dendrimers synthesized from poly(ethylene glycol) (PEG) were examined to understand the influence of alterations in the architecture of dendrimers on their conformation at interfaces and distribution of various groups on their surface. Effect of changes in the number of branching points, type of terminal functional groups and generation of dendrimer was primarily evaluated. Dendrimers were deposited on mica by spin coating at 0.1 mg/mL. Tapping mode atomic force microscopy (AFM) was employed for the visualization of dendrimer topographies while, X-ray photoelectron spectroscopy (XPS), AFM phase and force imaging were used as the tools for characterization of their surfaces. Individual dendrimer molecules could be imaged by AFM, which showed that they are round or oval in topography. Dendrimers were also flattened on mica but the extent of flattening differed with the chemical structure; for instance, third generation dendrimers were more flattened than second generation dendrimers whereas, dendrimers with higher number of branches had greater height above the mica surface. Hydrophilic and hydrophobic groups present towards the aerial interface existed in distinct zones rather than being distributed randomly, except in dendrimer with higher number of branches. The percentage of various hydrophobic groups on the surface of dendrimer was enhanced by increase in the number of branches but, was lowered by the presence of hydroxyl groups as the pendant terminal groups. Furthermore, the core of dendrimers was not always located towards the centre, its position was found to be altered by the number of branching points, type of terminal functional groups and the generation of dendrimer.     

Scavenging DPPH radicals catalyzed by binary noble metal-dendrimer nanocomposites

Catalytic activity of gold-platinum, gold-palladium, and platinum-palladium dendrimer nanocomposites for scavenging 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals was investigated. The gold-platinum and gold-palladium dendrimer nanocomposites were prepared via simultaneous reduction by sodium borohydride in the presence of poly(amidoamine) (PAMAM) dendrimers with amine or carboxyl terminal groups. The particles were not mixtures of monometallic particles but alloyed bimetallic particles. Bimetallic particles exhibited higher catalytic activity than monometallic ones.     

Structural characterization of chelator-terminated dendrimers and their synthetic intermediates by mass spectrometry

Herein, we report the structural analysis of a novel family of iron-chelating dendrimers and their synthetic intermediates utilizing matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and electrospray ionization ion trap (ESI IT) MS. These dendrimers share a benzene tricarbonyl core moiety attached to three tripodal branching units, each linking to three terminal groups, ranging from carboxyl, catechol and 3-hydroxy-6-methyl-pyran-4-one moieties and their protected analogs. In order to monitor the progression of dendrimer synthesis, all intermediates and final products were mass analyzed by conventional MALDI-TOF MS with and without alkali metal spiking. For structural characterization, interpretable post-source decay (PSD) and electrospray ionization ion trap MS/MS spectra were obtained from proton, sodium and potassium adducts of the dendrimers. One major route of dendrimer fragmentation was at or adjacent to the amide bonds either of the terminal chelating groups or near the core moiety. Fragmentation in the latter case was primarily at the N-terminal side of the amide bond and was directed by the proximity of a tertiary carbon of the branching unit. Furthermore, it was found that terminal ester, ether and amide linkages to the protecting and chelating groups could be sequentially broken in a single MS/MS spectrum through multiple cleavages resulting in product ions of decreasing intensity. Moreover, such cleavages could also be induced in a stepwise manner in a multistage ion trap MS(n) experiment.     

载入树状分子内部的纳米金修饰玻碳电极的制备及其对亚硝酸根的电化学测定

建立了一种简单、可靠的基于载入树状分子内部的纳米金修饰电极用于亚硝酸根测定的电化学分析方法.将壳聚糖(Chit)修饰在玻碳电极表面,在偶联活化剂碳二亚胺存在的条件下,4.5代羧基末端的树状分子(Dendrimer)通过其外围的羧基与壳聚糖的氨基形成酰胺键而连接在电极表面.Au(Ⅲ)通过与树状分子内部氮的配位作用被结合在...