One-pot synthesis of 1-aryl-3-methyl-1,3-dienes using methallyl(trimethyl)silane and aldehydes and their low temperature (Z)→(E) isomerization induced by sulfur dioxide

2-Methylprop-2-ene-1-sulfonyl fluorides can be easily prepared via the ene reaction of methallylsilanes and SO₂. In the presence of a base, aldehydes and 2-methylprop-2-ene-1-sulfonyl fluorides give 1,3-(E) and (Z)-dienes. Their (Z)→(E) isomerization by classical means fails or leads to their polymerization. It is shown that SO₂ can isomerize 1-aryl-3-methyl-1,3-dienes at low temperature, without formation of sulfolenes (cheletropic addition/elimination). Preliminary mechanistic studies suggest that SO₂ adds to 1,3-dienes forming 1,4-diradical intermediates that are responsible for the (Z)→(E) isomerizations.     

Copper-Catalyzed Regiodivergent Internal Allylic Alkylations

We report a copper-catalyzed, regioselective, and stereospecific alkylation of unbiased internal allylic carbonates with functionalized alkyl and aryl Grignard reagents. The reactions exhibit high stereospecificity and regioselectivity for either S_N2 or S_N2′ products under two sets of copper-catalyzed conditions, which enables the preparation of a broad range of products with E-alkene selectivity. Density functional theory calculations reveal the origins of the regioselectivity based on the different behaviors of homo- and heterocuprates.     

Carbon-carbon double bond in pillar[5]arene cavity: Selective binding of cis/trans-olefin isomers

The binding behavior of pillar[5]arenes (P5As) towards a series of olefin guests ((E)-1,4-dichlorobut-2-ene (1E), (Z)-1,4-dichlorobut-2-ene (1Z), (E)-but-2-ene-1,4-diol (2E), and (Z)-but-2-ene-1,4-diol (2Z), as well as an alkyne derivative 1,4-dichlorobut-2-yne (3)) have been studied in organic solution. P5As exhibit considerable selectivities for the trans-olefin isomers (1E and 2E) over their cis-isomers (1Z and 2Z). The cis/trans-selective interactions hold the potential of utilizing P5As to separate olefin isomers.     

Ruthenium-catalyzed linear selective allylic aminations of monosubstituted allyl acetates

The ruthenium-catalyzed highly linear selective allylic amination of monosubstituted allylic acetates with secondary amines was developed. The regioselectivity was controlled by the Ru₃(CO)₁₂/2-DPPBA catalyst, and a linear-type aminated product was obtained as a single regioisomer.     

A third generation chiral phosphorus-containing dendrimer as ligand in Pd-catalyzed asymmetric allylic alkylation

The synthesis of a third generation phosphorus-containing dendrimer possessing 24 chiral iminophosphine end groups derived from (2S)-2-amino-1-(diphenylphosphinyl)-3-methylbutane is described. In situ complexation of this dendrimer by [Pd(η³-C₃H₅)Cl]₂ affords a catalyst, which is used in asymmetric allylic alkylations of rac-(E)-diphenyl-2-propenyl acetate and pivalate. The percentage of conversion, the yield of isolated 2-(1,3-diphenylallyl)-malonic acid dimethyl ester, and its enantiomeric excess have been measured in each case, and were found to be good to very good (ee from 90% to 95%). Furthermore, the dendritic catalyst can be recovered and reused at least two times, with almost the same efficiency.     

From precursor to catalyst: the involvement of [Ru(η-Cp)Cl2]2 in highly branch selective allylic etherification of cinnamyl chlorides

(RuCp^∗Cl₂)₂, a general entry into Cp^∗Ru sandwich and half-sandwich chemistry was first used as a precatalyst in allylic etherification of cinnamyl chlorides with up to 98:2 regioselectivity (19 examples). Both the solvent effect and the exsiccant reaction condition are crucial to the reactivity and selectivity. Preliminary mechanism studies and the demonstration of Fluoxetine synthesis were presented in this work as well.     

First example of the C-alkylation of indoles with Baylis-Hillman acetates

Baylis-Hillman acetates undergo S_N2′ allylic substitution with indoles in the presence of 20 mol % of indium tribromide under mild conditions to afford a new class of substituted indoles in high yields with (E)-stereoselectivity. The stereochemistry of the products was assigned by various NMR experiments.     

DFT Rationalization of the Diverse Outcomes of the Iodine(III)‐Mediated Oxidative Amination of Alkenes

A computational study of the mechanism for the iodine(III)‐mediated oxidative amination of alkenes explains the experimentally observed substrate dependence on product distribution. Calculations with the M06 functional have been carried out on the reaction between PhI(N(SO₂Me)₂)₂ and three different representative substrates: styrene, α‐methylstyrene, and (E)‐methylstilbene. All reactions start with electrophilic attack by a cationic PhI(N(SO₂Me)₂)⁺ unit on the double bond, and formation of an intermediate with a single C?I bond and a planar sp² carbocationic center. The major path, leading to 1,2‐diamination, proceeds through a mechanism in which the bissulfonimide initially adds to the alkene through an oxygen atom of one sulfonyl group. This behavior is now corroborated by experimental evidence. An alternative path, leading to an allylic amination product, takes place through deprotonation at an allylic C?H position in the common intermediate. The regioselectivity of this amination depends on the availability of the resonant structures of an alternate carbocationic intermediate. Only in cases where a high electronic delocalization is possible, as in (E)‐methylstilbene, does the allylic amination occur without migration of the double bond.     

Two isomeric fourteen-membered bis-dithioacetals derived from (<Emphasis Type="Italic">Z</Emphasis>)- and (<Emphasis Type="Italic">E</Emphasis>)-but-2-ene-1,4-dithiols

(Z)-But-2-ene-1,4-dithiol was found to undergo isomerization into the E isomer. Condensation of (Z)- and (E)-but-2-ene-1,4-dithiols with acetaldehyde gave isomeric fourteen-membered bis-dithioacetals whose structure was determined by X-ray analysis.     

New synthetic routes to allylic germatranes

Allylic germatranes derived from triethanolamine can be prepared with moderate control of regioselectivity by two complementary routes. The first of these is through the preparation of the precursor allylic germanium trichlorides by a transmetallation reaction between germanium(IV) chloride and the corresponding allylic tributylstannanes followed by alcoholysis and reaction with triethanolamine. The second route is via the palladium-catalyzed hydrogermylation of conjugated dienes by germatrane, N(CH₂CH₂O)₃GeH. The former route gives mixtures of E and Z stereoisomers, whereas the second route gives exclusively Z products.     

Highly stereoselective allylic ethylation with alkoxytitanacyclopropane reagents. Synthesis of (1R/S,7R)-1,7-dimethylnonyl propanoate, the Western corn rootworm sex attractant

Allylic ethylation of 2-((E)-dodec-2-en-4-yloxy)tetrahydro-2H-pyran with ethylmagnesium bromide in the presence of titanium(IV) isopropoxide proceeds via a S_N2′ pathway to afford (E)-3-methyltridec-4-ene with excellent syn-diastereoselecivity. This transformation is used as a key step in the synthesis of (1R/S,7R)-1,7-dimethylnonyl propanoate, the Western corn rootworm (Diabrotica virgifera virgifera) sex attractant.     

Asymmetric de novo synthesis of fluorinated d-glucitol and d-mannitol analogues

A highly efficient anti-S_E2′ electrophilic fluorination of enantioenriched allylsilanes a subsequent dihydroxylation of the resulting allylic fluorides were used as key steps for the synthesis of three fluorinated carbohydrate analogues, 1,5-di-O-benzyl-2-deoxy-2-fluoro-d-glucitol, 2,6-di-O-benzyl-5-deoxy-5-fluoro-l-glucitol and 1,5-di-O-benzyl-2-deoxy-2-fluoro-d-mannitol. A new catalytic asymmetric route to 1-benzyloxy-4-trimethylsilyl-but-3-yn-2-ol, a common precursor to two advanced allylsilanes, is also described featuring a Noyori asymmetric transfer hydrogenation reaction.     

Gold versus silver-catalyzed amination of allylic alcohols

Direct substitution of the hydroxy group in allylic alcohols by different nitrogenated nucleophiles is performed using low loadings of cationic gold(I) or silver salts as catalysts. Sulfonamides, carbamates and aromatic amines can be used as nucleophiles. Comparative studies between the best catalysts, cationic (triphenylphosphite)gold(I) complex and silver triflate, demonstrate that the former catalyst shows, in general, better performance than silver, working at lower loadings, in shorter reaction times and at lower temperatures. Representative allylic alcohols are used giving good γ-regioselectivity, specially in the case of penta-1,4-dien-3-ol and (E)-1-phenylbut-2-en-1-ol affording the corresponding allylic sulfonamides with total regio and stereoselectivity by a hydroamination mechanism. In the case of crotyl alcohol and (E)-4-phenylbut-3-en-2-ol mainly and exclusively α-substituted sulfonamides were obtained, respectively, by a cationic mechanism.     

SN2-Selective allylic substitution of chiral γ-aryl substituted allylic picolinates with alkynylcopper reagents

Substitution of γ-aryl secondary allylic picolinates with alkynyl copper reagents was studied. The copper reagent, prepared from TMSCCMgBr and CuBr·Me₂S in 2:1, was subjected to substitution of the picolinate derived from (E)-3-phenyl-1-methyl-2-propenyl alcohol at 0 °C for 1 h in THF to produce a mixture of α- and γ-products and the alcohol in 67:20:13, while the reagent in 3 or 4:1 ratio gave the α-product with 90-91% selectivity. On the contrary, reaction in CH₂Cl₂-THF (6-8:1) at 0 °C for 1 h furnished the α-product with 99% regioselectivity. The effect of CH₂Cl₂ was also demonstrated with eight more examples. Furthermore, 99% inversion was determined by transformation to the literature compound and by chiral HPLC.     

Copper-catalyzed regioselective allylic oxidation of olefins via C–H activation

A regioselective oxidation of allylic C–H bond to C–O bond catalyzed by copper (I) was developed with diacyl peroxides as oxidants. The oxidation of allylic C–H bond was accomplished with good yield and regioselectivity under mild reaction conditions. This method has a broad substrate scope including cyclic olefins, terminal and internal acyclic olefins and allyl benzene compounds. The reaction proceeds by a radical mechanism as suggested by spin trapping experiments.     

Peracid dependent stereoselectivity and functional group contribution to the stereocontrol of epoxidation of (E)-alkene dipeptide isosteres

Twelve Boc-protected phenylalanyl-phenylalanine and phenylalanyl-glycine trans-vinyl isosteres were epoxidised with magnesium monoperoxyphtalate hexahydrate (MMPP) and trifluoroperacetic acid, and the results have been compared with those from earlier studies on epoxidations with m-CPBA. The alkenes were synthesised in high yields with high E/Z-selectivities using either the Julia or Schlosser reactions. The formation of threo isomers was favoured in all epoxidation reactions except with CF₃CO₃H on substrates containing two allylic/homoallylic functional groups directing the peracid to opposite faces of the alkene. The switch to erythro selectivity observed with CF₃CO₃H is suggested to emanate from coordination to the allylic ester functionalities via hydrogen bond donation from the peracid. The other peracid reagents seem to be preferentially coordinated to the allylic carbamate function. The contribution of individual functional groups to the stereopreference was also investigated.     

Cs2CO3-promoted synthesis of p-terphenyls from allyl ketones

An efficient Cs₂CO₃-promoted synthesis of acylated p-terphenyls from allylic ketones under mild conditions has been developed. The reaction occurred in moderate to good yields and tolerated γ-aryl substituted allylic aryl ketones containing functionalities such as alkanes, ethers and halogens.     

Schiff bases containing ferrocenyl and thienyl units and their utility in the palladium catalyzed allylic alkylation of cinnamyl acetate

The synthesis and characterization of two new ferrocenyl Schiff bases: [Fc-CHN-(CH₂)_n-(C₄H₃S)] (2) {Fc represents (η⁵-C₅H₅)Fe(η⁵-C₅H₄)- and n = 1(2a) or 2(2b)} containing the thienyl (C₄H₃S) group are reported. NMR studies indicate that 2 have the anti-(E) conformation in solution and the X-ray crystal structure of 2a confirms that it also adopts the anti-(E) form in the solid state. Ligands 2 have been tested in the palladium catalyzed allylic alkylation of (E)-3-phenyl-2-propen-1-yl (cinnamyl) acetate using sodium diethyl 2-methylmalonate as nucleophile. The reaction of 2 with [Pd(η³-1-Ph-C₃H₄)(μ-Cl)]₂ in the presence of a slight excess K[PF₆] produced [Pd(η³-1-Ph-C₃H₄){Fc-CHN-(CH₂)_n-(C₄H₃S)}][PF₆] {n = 1(5a) or 2(5b)}, which are the intermediates of this catalytic process. NMR studies of 5 reveal the coexistence of several isomers in solution. The stoichiometric reactions of 5 with the nucleophile are also reported. The comparison of the results obtained for 2, [Fc-CHN-(C₆H₄-2SMe)] (1a) and [(2,4,6-Me₃-C₆H₂)-CHN-(C₆H₄-2SMe)] (1b) has allowed to establish the importance of the nature of the substituents on the imine group on the regioselectivity of the process.     

Screening of ligands in the asymmetric metallocenethiolatocopper(I)-catalyzed allylic substitution with Grignard reagents

Screening of metallocenethiolate ligands for copper(I)-catalyzed substitution of allylic acetates with Grignard reagents has been carried out. The previously used ligand, lithium (R,S_p)-2-(1-dimethylaminoethyl)ferrocenylthiolate (4a), possessing both central and planar chirality, was the starting point for the screening. It was found that the diastereomeric ligand lithium (R,R_p)-2-(1-dimethylaminoethyl)ferrocenylthiolate (4b) exhibiting reversed planar chirality gave increased enantioselectivity in the allylic substitution, at least when cinnamyl acetate was used as a substrate. The ruthenocene-based ligand lithium (R,S_p)-2-(1-dimethylaminoethyl)ruthenocenylthiolate (4c) gave an enhanced reaction rate, but lower chiral induction. The use of disulfide bis[(R,S_p)-2-(1-dimethylaminoethyl)ferrocenyl]disulfide (7a) as a ligand precursor worked well but resulted in lower enantioselectivity.     

Fast and efficient preparation of Baylis-Hillman-derived (E)-allylic azides and related compounds in aqueous medium

A practical access to alkyl- and aryl-substituted (E)-2-(azidomethyl)alkenoates and related azido compounds from the corresponding allylic bromides in aqueous acetone is described. An alternative method to obtain the starting bromides based on heterogeneous catalysis under mild conditions was also investigated.