一种两性三元共聚物的合成

选用聚乙二醇二丙烯酸酯(PEGDA)为扩链剂,以丙烯酰胺(AM)、2-甲基-2-丙烯酰胺基丙磺酸(AMPS)、甲基丙烯酰氧乙基三甲基氯化铵(DMC)为主单体,采用水溶液聚合方法合成了两性三元共聚物AM/AMPS/DMC;测定了共聚物的性能,并利用红外光谱研究了其分子结构.结果表明,所合成的共聚物具有良好的耐酸和高温稳定性,以及高抗剪切率.     

丙烯酰胺-丙烯酰氧乙基三甲基氯化铵共聚合的竞聚率测定

采用溶液聚合制备了新型阳离子共聚物--聚丙烯酰胺基-丙烯酰氧乙基三甲基氯化铵(P(AM-DAC)),采用滴定法测定了其阳离子共聚物的阳离子度.分别采用Fineman-Ross 法、Kelen-Tudos 法和Yezrielev-Brokhina-Roskin法计算出单体竞聚率.结果表明,KT法和YBR法计算较为准确,丙烯酰氧乙基三甲基氯化铵和丙烯酰胺的竞聚率分别为rDAC=0.383 5,rAM=2.286 4.     

以PAAS为模板AM与DMC的模板共聚合反应

在水溶液中以聚丙烯酸钠(PAAS)为模板,进行了丙烯酰胺(AM)与2-甲基丙烯酰氧乙基三甲基氯化铵(DMC)的共聚合反应。研究了其聚合动力学,并对模板共聚物的序列结构进行了表征,最后对其进行了絮凝性能评价。结果表明:聚合反应符合模板聚合Ⅰ型机理,聚合反应速率分别与单体浓度和引发剂浓度的1.63和1.64次方成正比,此种共聚物与无模板参与聚合的普通共聚物相比具有更长的DMC序列长度,对高岭土悬浮液的絮凝沉降速率优于普通共聚物。     

(2-甲基丙烯酰氧乙基)三甲基氯化铵-丙烯酰胺反相微乳液共聚合特性研究

选用SPAN80与OP10复合乳化剂、K₂S₂O₈-Na₂SO₃氧化还原引发剂,进行(2-甲基丙烯酰氧乙基)三甲基氯化铵-丙烯酰胺反相微乳液共聚合反应.研究了单体配比、电解质浓度和乳化体系的油水比对共聚物分子量及离子度的影响,考察了该共聚合体系的反应特性.     

硫酸铵水溶液中分散聚合法制备两性共聚物P(AM-co-AA-co-DAC-co-DMC)

利用分散聚合技术,在硫酸铵水溶液中以丙烯酰胺(AM)、丙烯酸(AA)、丙烯酰氧乙基三甲基氯化铵(DAC)、甲基丙烯酰氧乙基三甲基氯化铵(DMC)为单体,合成了两性共聚物P(AM-co-AA-co-DAC-co-DMC).用FTIR,13C-NMR,TEM等方法表征了聚合物的结构和组成.考察了不同分散稳定剂、正负离子单体配比和pH对分散聚合的影响,并对P(AM-co-AA-co-DAC-co-DMC)水基分散聚合条件及稳定性进行了一些探讨.实验表明,在硫酸铵水溶液中制得较稳定的P(AM-co-AA-co-DAC-co-DMC)分散体系,应选用非离子型或阳离子型的分散稳定剂,如聚乙烯吡咯烷酮(PVP)、聚甲基丙烯酰氧乙基三甲基氯化铵(PDMC)、聚丙烯酰氧乙基三甲基氯化铵(PDAC),而其pH应在2到4之间.当选用占总质量1.5%的聚乙烯吡咯烷酮(PVP)为分散稳定剂,引发温度为40℃,正负离子单体物质的量比值大于1,pH=3时,可以制得总离子度超过25%的纳米级两性聚合物.     

阴离子疏水单体改性的P(AM-co-DMC)的合成及絮凝性能

在少量阴离子疏水单体4-(ω-丙烯酰氧乙氧基)苯甲酸(PEBA)的参与下,合成了丙烯酰胺(AM)-丙烯酰氧乙基三甲基氯化铵(DMC)共聚物。通过表观黏度及芘探针发射谱测定了疏水改性P(AM-co-DMC)溶液的临界缔合浓度(CAC)。透射电镜观察表明:在水溶液中,当疏水改性P(AM-co-DMC)浓度高于CAC时,因静电及疏水作用可形成微球状缔合体。对高岭土悬浮液的絮凝表明,与普通P(AM-co-DMC)共聚物相比,疏水改性P(AM-co-DMC)具有较好的絮凝能力及较宽的窗体用量。pH对絮凝效果的影响表明,除疏水作用外,高分子链间的静电作用是提高絮凝效果的另一原因。     

季铵盐单体在蒙脱土中的插层原位聚合反应

通过四种结构相似的可聚合季铵盐(二甲基二烯丙基氯化铵、三甲基烯丙基氯化铵、丙烯酰氧乙基三甲基氯化铵、甲基丙烯酰氧乙基三甲基氯化铵), 通过蒙脱土层间构型排布的模拟及分析比较, 从分子水平上探讨了原位插层聚合反应中, 单体分子排列角度及构型对聚合反应的影响.     

AM/(2-甲基丙烯酰氧乙基)三甲基氯化铵/2-丙烯酰胺基-2-甲基丙基磺酸钠的反相微乳液共聚合动力学研究

通过实验绘制了失水山梨醇单月桂酸酯(Span20)-聚氧乙烯山梨醇酐单脂酸酯(Tween80)复配乳化剂、丙烯酰胺、(2-甲基丙烯酰氧乙基)三甲基氯化铵、2-丙烯酰胺基-2-甲基丙基磺酸钠和环己烷的拟三元相图.采用过硫酸铵-亚硫酸氢钠氧化还原引发剂,通过动力学研究,得到了聚合反应的表观活化能为68.10 kJ/mol,并分别得到了聚合速率与产物特性粘数的动力学关系式Rp∝[M]1.74[APS]0.60[E]-1.28,[η]∝[M]0.78[APS]-0.23[E]-0.71,分析了单体浓度、引发剂浓度、乳化剂浓度对共聚合反应速率Rp和共聚物特性粘数[η]作用及影响的原因,在动力学研究的基础上初步探讨了聚合机理.     

反相乳液聚合制备壳聚糖接枝共聚物及应用

以壳聚糖、丙烯酰胺、甲基丙烯酰氧乙基三甲基氯化铵为原料,硝酸铈铵为引发剂,Span-20为乳化剂,通过反相乳液聚合技术,合成壳聚糖阳离子接枝共聚物。分析讨论了乳化剂用量、引发剂浓度、油水体积比、单体配比、反应时间、反应温度对共聚物接枝率的影响,并采用正交试验方法对合成条件进行了优化。研究了其对重金属离子Cu2 、Cd2 、Zn2 的吸附性能。结果表明,在Cu2 、Cd2 、Zn2 的混合离子体系中,该共聚物对Cu2 、Zn2 有选择性吸附。     

聚合方法对一种正离子聚丙烯酰胺结构与性能的影响

对相同进料比下,以过硫酸胺/亚硫酸氢钠为氧化还原引发剂,分别用溶液法和反相微乳液法合成的丙烯酰胺(AM)与2-甲基丙烯酰氧乙基三甲基氯化胺(MADQUAT)的共聚物P(AM-MADQUAT),根据单体竞聚率计算了两种共聚物的序列分布和组成分布.考察了两种聚合物结构对高岭土絮体尺寸、zeta电位降以及絮体压缩屈服应力的影响,初步建立了不同聚合方法合成的阳离子聚丙烯酰胺结构与絮凝性能之间的相关性.     

Furyl- and thienyl-silatranes and germatranes

We review our research on the synthesis and study of the physical and biological properties of furyl- and thienylgermatranes and -silatranes.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 725–732, June, 1992.     

Review and patents and literature

The use of the insect cell/baculovirus expression system for producing recombinant proteins of bacterial, plant, insect, and mammalian origin has become widespread. The popularity of this eukaryotic expression system is due to many factors, including (1) potentially high protein expression levels, (2) ease and speed of genetic engineering, (3) ability to accommodate large DNA inserts, (4) protein processing similar to higher eukaryotic cells (e.g., mammalian cells), and (5) ease of insect cell growth (e.g., suspension growth). The following review of the literature discusses two engineering aspects of recombinant protein synthesis by insect cell cultures: bioreactor scale-up and insect cell line selection. Following this review patent abstracts and additional literature pertaining to expression of recombinant proteins in insect cell culture are listed.     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...     

微量元素与疾病诊断治疗的研究现状及展望

对国内外微量元素与疾病的关系及其诊断治疗的研究现状及研究动向进行了综述，包括：微量元素与地方病、癌肿、心血管病、糖尿病、眼病、神经系统病等。参考文献72篇。     

Preparation and photolysis of poly-p-ethylacrylophenone and poly-p-chloroacrylophenone and their copolymers with styrene and methyl methacrylate

Poly-p-ethylacrylophenone (PPEtAP) and poly-p-chloroacrylophenone (PPClAP) and their copolymers with styrene (PEtAP/S) and (PClAP/S) and with methyl methacrylate (PEtAP/MMA) and (PClAP/MMA) were prepared. Quantum yields of main-chain scissions at 366 nm at room temperature in benzene solution are of the same order as those of the unsubstituted polyacrylophenone and its copolymers. Substitution with chlorine and ethyl group in the para position compared to the unsubstituted polyacrylophenone and its copolymers leads to an increase of the lifetime for the n–π^* excited triplet state, as is evident from the measured quenching constants of photolysis. The low-temperature emission spectra of the copolymers are similar to the spectra of the model compounds in a polymer film. For the homopolymer, however, the character of the emission spectrum changes considerably.     

Concentrations and distributions of trace and minor elements in Chinese and Canadian coals and ashes

A total of 35 trace and minor elements including some of environmental significance were determined in each of a selection of 15 Chinese and 6 Canadian thermal coals and their ashes by using the SLOWPOKE-2 nuclear reactor facility of the University of Toronto. The concentrations and distributions of these constituents among the coals and their combustion products (viz. ash and volatile matter) are presented together with an interpretation of their significance in relation to the large scale combustion of these coals as thermal fuels in industrialized countries such as China and Canada. The detailed results showed wide variations in trace impurity concentrations (up to a factor of 100 and more) among the coals studied with few large differences between those of Chinese and Canadian origin except that the rare earths, Sc, Th, U, I, and Se were much higher in the former, other halogens, As and Na were lower. Values for elemental enrichment factors (EF) relative to normal crustal abundances indicated that only As(EF=13), Br(5.7), I(16), S(230), Sb(11) and Se(320) were appreciably enriched in coal. During static ashing at 750°C most of the halogens, S and Se were volatilized whereas most other inorganic constituents were highly retained and concentrated in the ash by factors of 6 to 11.