键级守恒法研究甲酸在过渡金属上的分解机理

用键级守恒-Morse势方法研究了甲酸在Ag(111)、Ni(111)和Fe/W(110)面上极低覆盖度及较高覆盖度下的分解机理。计算结果表明,在极低覆盖度下甲酸分解通过HCOO中间体进行,其分解能力依Ag相似文献   

Theoretical Approach for the Luminescent Properties of Ir(III) Complexes to Produce Red–Green–Blue LEC Devices

With an appropriate mixture of cyclometalating and ancillary ligands, based on simple structures (commercial or easily synthesized), it has been possible to design a family of eight new Ir(III) complexes (1A, 1B, 2B, 2C, 3B, 3C, 3D and 3E) useful as luminescent materials in LEC devices. These complexes involved the use of phenylpyridines or fluorophenylpyridines as cyclometalating ligands and bipyridine or phenanthroline-type structures as ancillary ligands. The emitting properties have been evaluated from a theoretical approach through Density Functional Theory and Time-Dependent Density Functional Theory calculations, determining geometric parameters, frontier orbital energies, absorption and emission energies, injection and transport parameters of holes and electrons, and parameters associated with the radiative and non-radiative decays. With these complexes it was possible to obtain a wide range of emission colours, from deep red to blue (701–440 nm). Considering all the calculated parameters between all the complexes, it was identified that 1B was the best red, 2B was the best green, and 3D was the best blue emitter. Thus, with the mixture of these complexes, a dual host–guest system with 3D-1B and an RGB (red–green–blue) system with 3D-2B-1B are proposed, to produce white LECs.     

Overview of the Structure–Dynamics–Function Relationships in Borohydrides for Use as Solid-State Electrolytes in Battery Applications

The goal of this article is to highlight crucial breakthroughs in solid-state ionic conduction in borohydrides for battery applications. Borohydrides, M^z+B_xH_y, form in various molecular structures, for example, nido-M⁺BH₄; closo-M²⁺B₁₀H₁₀; closo-M²⁺B₁₂H₁₂; and planar-M⁶⁺B₆H₆ with M = cations such as Li⁺, K⁺, Na⁺, Ca²⁺, and Mg²⁺, which can participate in ionic conduction. This overview article will fully explore the phase space of boron–hydrogen chemistry in order to discuss parameters that optimize these materials as solid electrolytes for battery applications. Key properties for effective solid-state electrolytes, including ionic conduction, electrochemical window, high energy density, and resistance to dendrite formation, are also discussed. Because of their open structures (for closo-boranes) leading to rapid ionic conduction, and their ability to undergo phase transition between low conductivity and high conductivity phases, borohydrides deserve a focused discussion and further experimental efforts. One challenge that remains is the low electrochemical stability of borohydrides. This overview article highlights current knowledge and additionally recommends a path towards further computational and experimental research efforts.     

An Efficient Approach to the Synthesis of Hydrazinyl Pseudo‐Peptides

New hydrazinyl pseudo‐peptides have been obtained from Ugi four‐component reaction (4CR). The 5‐hydrazinyl‐5‐oxopentanoic acids used as starting materials were prepared by the reaction of hydrazides with anhydrides. Mild reaction conditions, high atom economy, bond‐forming efficiency, and easy workup are advantages of this approach. The products have four amide bonds and high potential for H‐bonding.     

Multi-Matrix Approach for the Analysis of Bicalutamide Residues in Oncology Centers by HPLC–FLD

Cytostatics are toxic pharmaceuticals, whose presence in surfaces puts healthcare workers at risk. These drugs might also end up in hospital effluents (HWW), potentially damaging aquatic ecosystems. Bicalutamide is a cytostatic extensively consumed worldwide, but few analytical methods exist for its quantification and most of them require advanced techniques, such as liquid chromatography mass spectrometry (LC-MS), which are very complex and expensive for large monitoring studies. Therefore, a simple but reliable multi-matrix high performance liquid chromatographic method, with fluorescence detection, was developed and validated to rapidly screen abnormal concentrations of bicalutamide in HWW and relevant contamination levels of bicalutamide in indoor surfaces (>100 pg/cm²), prior to confirmation by LC-MS. The method presents good linearity and relatively low method detection limits (HWW: 0.14 ng/mL; surfaces: 0.28 pg/cm²). Global uncertainty was below 20% for concentrations higher than 25 ng/mL (HWW) and 50 pg/cm² (surfaces); global uncertainty was little affected by the matrix. Therefore, a multi-matrix assessment could be achieved with this method, thus contributing to a holistic quantification of bicalutamide along the cytostatic circuit. Bicalutamide was not detected in any of the grab samples from a Portuguese hospital, but an enlarged sampling is required to conclude about its occurrence and exposure risks.     

Chemical Approach to the Optimization of Conditions Using HS-SPME/GC–MS for Characterization of Volatile Compounds in Eugenia brasiliensis Fruit

Grumixama (Eugenia brasiliensis Lam.) is a native fruit of the Brazilian Atlantic Forest, belonging to the Myrtaceae family, which designatesthe most significant number of species with food potential. It stands out due to its phytochemical characteristics because of the presence of polyphenols and volatile organic compounds. Volatile compounds are substances released by foods that give off an aroma and influence flavor. Solid-phase microextraction is a technique that allows for low-cost, fast, and solvent-free extraction, has an affinity for numerous analytes, and is easily coupled to gas chromatography. The objectives of this work were to evaluate the efficiency of different fibers of SPME (solid-phase microextraction) in the extraction of volatile organic compounds from grumixama pulp; optimize a method for extraction time, temperature, and sample weight; and to determine the characteristic volatile profile of this fruit. For the extraction of volatile compounds, three fibers of different polarities were used: polar polyacrylate (PA) fibers, divinylbenzene/carboxyne/polydimethylsiloxane (DVB/CAR/PDMS) semipolar fibers, and polydimethylsiloxane/divinylbenzene (PDMS/DVB). Fourteen volatile organic compounds (VOCs) were identified by DVB/CAR/PDMS, six by PA, and seven by PDMS/DVB through solid-phase microextraction in the headspace mode (SPME-HS). Considering the total number of compounds identified, regardless of the fiber used, and the optimization of the method, Eugenia brasiliensis presented sesquiterpene fractions (85.7%, 83.3%, and 85.7% of total VOCs) higher than the monoterpene fractions (14.3%, 16.7%, and 14.3%) for DVB/CAR/PDMS, PA, and PDMS/DVB, respectively in its composition. In addition, it was possible to verify that the fiber DVB/CAR/PDMS presented a better efficiency due to the larger chromatographic area observed when the grumixama pulp was subjected to conditions of 75 °C, 2.0 g, and an adsorption time of 20 min.     

An Efficient Solid-Phase Microextraction–Gas Chromatography–Mass Spectrometry Method for the Analysis of Methyl Farnesoate Released in Growth Medium by Daphnia pulex

Methyl farnesoate (MF), a juvenile hormone, can influence phenotypic traits and stimulates male production in daphnids. MF is produced endogenously in response to stressful conditions, but it is not known whether this hormone can also be released into the environment to mediate stress signaling. In the present study, for the first time, a reliable solid-phase microextraction–gas chromatography–mass spectrometry (SPME-GC-MS) method was developed and validated for the ultra-trace analysis of MF released in growth medium by Daphnia pulex maintained in presence of crowding w/o MK801, a putative upstream inhibitor of MF endogenous production. Two different clonal lineages, I and S clones, which differ in the sensitivity to the stimuli leading to male production, were also compared. A detection limit of 1.3 ng/L was achieved, along with good precision and trueness, thus enabling the quantitation of MF at ultra-trace level. The achieved results demonstrated the release of MF by both clones at the 20 ng/L level in control conditions, whereas a significant decrease in the presence of crowding was assessed. As expected, a further reduction was obtained in the presence of MK801. These findings strengthen the link between environmental stimuli and the MF signaling pathway. Daphnia pulex, by releasing the juvenile hormone MF in the medium, could regulate population dynamics by means of an autoregulatory feedback loop that controls the intra- and extra-individual-level release of MF produced by endogenous biosynthesis.     

Comparison of ATR–FTIR and O-PTIR Imaging Techniques for the Characterisation of Zinc-Type Degradation Products in a Paint Cross-Section

ATR–FTIR (attenuated total reflection–Fourier-transform infrared) microscopy with imaging is widely used in the heritage field to characterise complex compositions of paint cross-sections. However, some limitations include the need for ATR crystal contact with the sample and the inability to resolve particle size below the IR diffraction limit. Recently, a novel O-PTIR (optical-photothermal infrared) spectroscopy technique claimed to open a new avenue for non-invasive, efficient, and reliable analysis at sub-micron resolution. O-PTIR produces transmission-like FTIR spectra for interpretation, without the need to touch the sample, which are highly favourable attributes for analysing heritage samples. This paper reports the comparison of O-PTIR and ATR–FTIR techniques applied to a cross-section embedding a thin paint fragment that delaminated from a late 19th to early 20th-century oil portrait. The hazy paint fragment consisted of zinc soaps (both crystalline and amorphous), gordaite (NaZn₄Cl(OH)₆SO₄·6H₂O), and zinc lactate, that could not all be well-resolved with ATR–FTIR imaging. With O-PTIR analysis, the degradation compounds could be resolved at sub-micron resolution with an equivalent or better signal-to-noise ratio. This case study shows how the two techniques can be used to obtain comprehensive information at a broad level with ATR–FTIR and a detailed level with O-PTIR.     

Using Non‐Destructive Analysis Techniques to Examine the Artworks of Taiwanese Artist Cheng‐Po Chen (1895‐1947)

This study employed the non‐destructive techniques to analyze and examine the artworks of the Taiwanese artist Cheng‐Po Chen (1895‐1947) for disclosing the damage to Chen's artworks and determine his creation habits. Ten pieces of artworks that required restoration were examined using ultraviolet examination techniques. Based on the differences in their fluorescence characteristics, various parts of these works were shown to have been retouched, thus, original and retouched regions were distinguished. Examining these works using Infrared instrument revealed that Chen did not use charcoal to prepare drafts, and he directly applied oil paint to the canvases. Subsequently, these two examination techniques were adopted to examine sketches. The results showed that residues imprinted on them cause of storage methods were organic materials from charcoal and not carbon granules. The X‐ray examination identified numerous creations beneath the surface of several artworks. The X‐ray fluorescence spectrometer was used for elemental analysis of the pigments. The results corresponded with the pigments listed in Chen's purchase form, thus, we summarized the composition of palettes used by Chen. In general, this study acquired a considerable amount of information from the pigment examinations and established a database of the pigments that Chen commonly employed in his artworks.     

Use of the Interpolyelectrolyte Complexes of Poly(acrylic acid)‐Chitosan as Inductors of Tolerance Against Pathogenic Fungi in Tomato (Lycopersicon esculentum Mill. var. Floradade)

The interpolyelectrolyte complexes of poly(acrylic acid)‐chitosan were investigated as inductor of systemic resistance potentially useful in the organic production of vegetables. These complexes, which are water soluble, were tested in tomato (Lycopersicon esculentum Mill. var. Floradade). The seed treatments were carried out using solutions consisting of 0.1 vol.‐% of the complex and 5 g · L^?1 NaCl in water. The data showed that this treatment produced a higher resistance to the attack by Fusarium oxysporum and Phytophthora capsici pathogens in tomato seedlings.

Formation of the interpolyelectrolyte complex of poly(acrylic acid) and chitosan.     

The Use of Aryl-Substituted Homophthalic Anhydrides in the Castagnoli–Cushman Reaction Provides Access to Novel Tetrahydroisoquinolone Carboxylic Acid Bearing an All-Carbon Quaternary Stereogenic Center

Novel aryl-substituted homophthalic acids were cyclodehydrated to the respective homophthalic anhydrides for use in the Castagnoli–Cushman reaction. With a range of imines, this reaction proceeded smoothly and delivered hitherto undescribed 4-aryl-substituted tetrahydroisoquinolonic acids with remarkable diastereoselectivity, good yields and no need for chromatographic purification. These findings significantly extend the range of cyclic anhydrides employable in the Castagnoli–Cushman reaction and signify access to a novel substitution pattern around the medicinally relevant tetrahydroisoquinolonic acid scaffold.     

An Activity‐Based Sensing Approach for the Detection of Cyclooxygenase‐2 in Live Cells

Cyclooxygenase‐2 (COX‐2) overexpression is prominent in inflammatory diseases, neurodegenerative disorders, and cancer. Directly monitoring COX‐2 activity within its native environment poses an exciting approach to account for and illuminate the effect of the local environments on protein activity. Herein, we report the development of CoxFluor, the first activity‐based sensing approach for monitoring COX‐2 within live cells with confocal microscopy and flow cytometry. CoxFluor strategically links a natural substrate with a dye precursor to engage both the cyclooxygenase and peroxidase activities of COX‐2. This catalyzes the release of resorufin and the natural product, as supported by molecular dynamics and ensemble docking. CoxFluor enabled the detection of oxygen‐dependent changes in COX‐2 activity that are independent of protein expression within live macrophage cells.     

Physicochemical Characterization of the Loganic Acid–IR,Raman, UV-Vis and Luminescence Spectra Analyzed in Terms of Quantum Chemical DFT Approach

The molecular structure and vibrational spectra of loganic acid (LA) were calculated using B3LYP density functional theory, the 6–311G(2d,2p) basis set, and the GAUSSIAN 03W program. The solid-phase FTIR and FT-Raman spectra of LA were recorded in the 100–4000 cm⁻¹ range. The assignment of the observed bands to the respective normal modes was proposed on the basis of the PED approach. The stability of the LA molecule was considered using NBO analysis. The electron absorption and luminescence spectra were measured and discussed in terms of the calculated singlet, triplet, HOMO, and LUMO electron energies. The Stokes shift derived from the optical spectra was 20,915 cm⁻¹.     

Immobilization of Tyrosinase on Chitosan — An Optimal Approach to Enhance the Productivity of L‐DOPA from L‐Tyrosine

Tyrosinase was immobilized on Chitosan (CTS) beads to produce 3,4‐dihydroxy‐L‐phenylalanine (L ‐DOPA) from L ‐tyrosine. Epichlorohydrin (ECH), ethylene glycol diglycidyl ether (EGDE), and glutaraldehyde (GLU) were used as coupling agents, respectively. Ultraviolet/visible measurements on CTS films showed that the reaction intermediate (L ‐dopaquinone) attacked the amino groups on CTS, so the amine residues on chitosan were capped by acetic acid anhydride (Ac) or formaldehyde (Fm) to avoid the deactivation of the immobilized tyrosinase. The pH and temperature of the maximal rate to produce L‐DOPA were investigated. GLU (coupling agent) and Ac (capping agent) were selected for practical utility. A 7.5% (w/v) concentration of GLU was found to attain maximal activity of the immobilized enzyme. The thermal stability of tyrosinase immobilized on CTS‐GLU‐Ac, and after treatment with sodium borohydride, was enhanced to a great extent. The L ‐DOPA converting efficiency in the environmental conditions of this study decreased from 45.1% to 39.9% (between 1^st and 30^th batch). This immobilized tyrosinase can be used practically in the production of L‐DOPA from L‐tyrosine.