Microfluidic Synthesis Enables Dense and Uniform Loading of Surfactant‐Free PtSn Nanocrystals on Carbon Supports for Enhanced Ethanol Oxidation

Developing new synthetic methods for carbon supported catalysts with improved performance is of fundamental importance in advancing proton exchange membrane fuel cell (PEMFC) technology. Continuous‐flow, microfluidic reactions in capillary tube reactors are described, which are capable of synthesizing surfactant‐free, ultrafine PtSn alloyed nanoparticles (NPs) on various carbon supports (for example, commercial carbon black particles, carbon nanotubes, and graphene sheets). The PtSn NPs are highly crystalline with sizes smaller than 2 nm, and they are highly dispersed on the carbon supports with high loadings up to 33 wt %. These characteristics make the as‐synthesized carbon‐supported PtSn NPs more efficient than state of the art commercial Pt/C catalysts applied to the ethanol oxidation reaction (EOR). Significantly enhanced mass catalytic activity (two‐times that of Pt/C) and improved stability are obtained.     

Synthesis of Hollow Platinum–Palladium Nanospheres with a Dendritic Shell as Efficient Electrocatalysts for Methanol Oxidation

Engineering the size, composition, and morphology of platinum‐based nanomaterials can provide a great opportunity to improve the utilization efficiency of electrocatalysts and reinforce their electrochemical performances. Herein, three‐dimensional platinum–palladium hollow nanospheres with a dendritic shell (PtPd‐HNSs) are successfully fabricated through a facile and economic route, during which SiO₂ microspheres act as the hard template for the globular cavity, whereas the triblock copolymer F127 contributes to the formation of the dendritic shell. In contrast with platinum hollow nanospheres (Pt‐HNSs) and commercial platinum on carbon (Pt/C) catalyst, the novel architecture shows a remarkable activity and durability toward the methanol oxidation reaction (MOR) owing to the coupled merits of bimetallic nanodendrites and a hollow interior. As a proof of concept, this strategy is also extended to trimetallic gold–palladium–platinum hollow nanospheres (AuPdPt‐HNSs), which paves the way towards the controlled synthesis of other bi‐ or multimetallic platinum‐based hollow electrocatalysts.     

High‐Efficiency Encapsulation of Pt Nanoparticles into the Channel of Carbon Nanotubes as an Enhanced Electrocatalyst for Methanol Oxidation

Pt‐based nanostructures serving as anode catalysts for the methanol oxidation reaction (MOR) have been widely studied for many years. Nevertheless, challenging issues such as poor reaction kinetics and the short‐term stability of the MOR are the main drawbacks of such catalysts and limit their applications. Herein, we have developed a facile approach to encapsulate Pt nanoparticles (NPs) inside the nanochannels of porous carbon nanotubes (CNTs; Pt‐in‐CNTs) as a new enhanced electrocatalytic material. The as‐prepared CNTs offer simultaneously ordered diffusion channels for ions and a confinement effect for the NPs, which both facilitate the promotion of catalytic kinetics and avoid the Ostwald ripening of Pt NPs, thus leading to high activity and durable cycle life as an anode catalyst for MOR. This work provides a new approach for enhancing the stability and activity by optimizing the structure of the catalyst, and the Pt‐in‐CNTs represent the most durable catalysts ever reported for MOR.     

Ultrathin-Polyaniline-Coated Pt–Ni Alloy Nanooctahedra for the Electrochemical Methanol Oxidation Reaction

Controlling the morphology and composition of nanocatalysts constructed from metals and conductive polymers has attracted attention owing to their great potential for the development of high-efficiency catalysts for various catalytic applications. Herein, a facile synthetic approach for ultrathin-polyaniline-coated Pt–Ni nanooctahedra (Pt-Ni@PANI hybrids) with controllable PANI shell thicknesses is presented. Pt–Ni nanooctahedra/C catalysts enclosed by PANI shells with thicknesses from 0.6 to 2.4 nm were obtained by fine control over the amount of aniline. The various Pt-Ni@PANI hybrids exhibited electrocatalytic activity toward the methanol oxidation reaction that is highly dependent on the thickness of the PANI shell. Pt-Ni@PANI hybrids with the thinnest PANI shells (0.6 nm) showed markedly improved electrocatalytic performance for the methanol oxidation reaction compared with Pt-Ni@PANI hybrids with thicker PANI shells, Pt–Ni nanooctahedra/C, and commercial Pt/C due to synergistic benefits of ultrathin PANI shells and Pt–Ni alloy.     

Platinum Nanoparticles Stabilized by Cucurbit[6]uril with Enhanced Catalytic Activity and Excellent Poisoning Tolerance for Methanol Electrooxidation

Three sub‐10 nm platinum nanoparticles (PtNPs) with distinctive morphologies were developed by using cucurbit[6]uril (CB[6]) as stabilizing agent and support. Both the size and shape of the PtNPs were simultaneously controlled by tuning the reducing agents. The prepared NPs have been comprehensively characterized by X‐ray diffraction, X‐ray photoelectron spectroscopy, transmission electron microscopy, and cyclic voltammetry. On account of the presence of CB[6] and its unique structural features, the as‐prepared PtNPs are homogeneous in morphologies and exhibit higher activities toward methanol electrooxidation than commercial Pt/C. CB[6] has the ability to bind small molecules that can promote CO oxidation, therefore, all the three PtNPs showed enhanced poisoning tolerance. Such unique abilities of CB[6] can even promote the poisoning tolerance of commercial Pt/C through simple physical mixing.     

Single Pt–Pd Bimetallic Nanoparticle Electrode: Controllable Fabrication and Unique Electrocatalytic Performance for the Methanol Oxidation Reaction

Understanding the electrocatalytic activity at single nanoparticles/nanoclusters level is extremely important. In this work, a method for the electro-deposition of single Pt–Pd nanoparticles (NPs) is described using a single nanopore electrode as a template. The electro-deposition process was investigated carefully and the results show that the process is controlled by diffusion and electro-crystallization process, simultaneously, and the glass sheath property around the nanopore has a large impact on the formation of single Pt–Pd NPs due to the “edge effect”. The prepared single Pt–Pd NPs exhibit excellent electrocatalytic activity in the methanol oxidation reaction, which can be used to screen electrocatalysts with high efficiency for utility in the energy field.     

Advanced Catalytic Performance of Au–Pt Double‐Walled Nanotubes and Their Fabrication through Galvanic Replacement Reaction

Bimetallic tubular nanostructures have been the focus of intensive research as they have very interesting potential applications in various fields including catalysis and electronics. In this paper, we demonstrate a facile method for the fabrication of Au–Pt double‐walled nanotubes (Au–Pt DWNTs). The DWNTs are fabricated through the galvanic displacement reaction between Ag nanowires and various metal ions, and the Au–Pt DWNT catalysts exhibit high active catalytic performances toward both methanol electro‐oxidation and 4‐nitrophenol (4‐NP) reduction. First, they have a high electrochemically active surface area of 61.66 m² g^?1, which is close to the value of commercial Pt/C catalysts (64.76 m² g^?1), and the peak current density of Au–Pt DWNTs in methanol oxidation is recorded as 138.25 mA mg^?1, whereas those of Pt nanotubes, Au/Pt nanotubes (simple mixture), and commercial Pt/C are 24.12, 40.95, and120.65 mA mg^?1, respectively. The Au–Pt DWNTs show a markedly enhanced electrocatalytic activity for methanol oxidation compared with the other three catalysts. They also show an excellent catalytic performance in comparison with common Au nanotubes for 4‐nitrophenol (4‐NP) reduction. The attractive performance exhibited by these prepared Au–Pt DWNTs can be attributed to their unique structures, which make them promising candidates as high‐performance catalysts.     

Preparation of Surfactant-Free Pt and PtRu Nanoparticles with High Activity for Methanol Oxidation

A simple and green approach to synthesize highly active electro-catalysts for methanol oxi- dation reaction （MOR） without using any organic agents is described. Pt nanoparticles are directly deposited on the pre-cleaned and pre-oxidized multiwall carbon nanotubes （MWC- NTs） from Pt salt by using CO as the reductant. MOR activity has been characterized by both cyclic voltammetry and chronoamperometry, the current density and mass specific current at the peak potential （ca. 0.9 V vs. RHE） reaches 11.6 mA/cm^2 and 860 mA/mgpt, respectively. After electro-deposition of Ru onto the Pt/MWCNTs surface, the catalysts show steady state mass specific current of 20 and 80 mA/mgpt at 0.5 and 0.6 V, respectively.     

Chitosan‐Functionalized Carbon Nanotubes as Support for the High Dispersion of PtRu Nanoparticles and their Electrocatalytic Oxidation of Methanol

Carbon nanotubes (CNTs) were non‐covalently functionalized with chitosan (Chit) and then employed as the support for PtRu nanoparticles. The functionalization was carried out at room temperature without the use of corrosive acids, thereby preserving the integrity and the electronic conductivity of the CNTs. Transmission electron microscopy reveals that PtRu nanoparticles were highly dispersed on the surface of Chit‐functionalized CNTs (CNT‐Chit) with small particle‐size. Cyclic voltammetry studies indicated that the PtRu nanoparticle/CNT‐Chit nanohybrids have a higher electrochemical surface area, electrocatalytic performance, and stability towards methanol oxidation compared to PtRu nanoparticles supported on the pristine CNTs.     

多价MnOx/C电催化剂用于高效氮还原反应

氨在人类的生产生活中起着重要的作用,但目前工业上合成氨广泛采用的Haber-Bosch法耗能大,且污染严重。 而N₂电还原反应(ENRR)被认为是一种有效的替代方法,由于N₂的键能较高,目前仍然缺乏高活性的催化剂。 在这里,通过简单的浸渍法和氧化还原法制备了多价态的MnO_x/C催化剂,该催化剂具有较高的氮还原反应活性(氨产率达到7.8 μg_NH3/(h·mg_cat),法拉第效率高达9.2%) 。进一步研究表明,多价态MnO_x/C催化剂具有高氮还原反应活性的主要原因是不同价态的Mn离子(Mn²⁺、Mn³⁺、Mn⁴⁺)之间存在协同效应。     

铂纳米晶的合成及其甲醇电催化性能

以草酰胺作为保护剂,采用胶体法合成铂纳米晶,考察了不同溶液pH值、前驱体与保护剂反应物配比对铂纳米晶形貌及其甲醇电催化氧化活性的影响. 测试表明,pH = 5、反应物配比1:20合成的铂纳米晶的甲醇电催化氧化活性最佳,其峰电流密度达到1709 μA·cm^-2. 空气中搁置3个月后,其表面形貌变化不大,但甲醇的电催化活性显著降低. 0.05 ~ 1.2 V电位范围循环扫描100周期,其循环伏安曲线明显变化,晶体表面原子排列方式也发生变化,由易毒化(100)面逐渐转化为(110)面,其甲醇电催化活性增加.     

Synthesis and Characterization of Ligand-Linked Pt Nanoparticles: Tunable,Three-Dimensional,Porous Networks for Catalytic Hydrogen Sensing

Porous networks of Pt nanoparticles interlinked by bifunctional organic ligands have shown high potential as catalysts in micro-machined hydrogen gas sensors. By varying the ligand among p-phenylenediamine, benzidine, 4,4‘‘-diamino-p-terphenyl, 1,5-diaminonaphthalene, and trans-1,4-diaminocyclohexane, new variants of such networks were synthesized. Inter-particle distances within the networks, determined via transmission electron microscopy tomography, varied from 0.8 to 1.4 nm in accordance with the nominal length of the respective ligand. While stable structures with intact and coordinatively bonded diamines were formed with all ligands, aromatic diamines showed superior thermal stability. The networks exhibited mesoporous structures depending on ligand and synthesis strategy and performed well as catalysts in hydrogen gas microsensors. They demonstrate the possibility of deliberately tuning micro- and mesoporosity and thereby transport properties and steric demands by choice of the right ligand also for other applications in heterogeneous catalysis.     

Size‐Dependent Electrocatalytic Activity of Free Gold Nanoparticles for the Glucose Oxidation Reaction

Understanding the fundamental relationship between the size and the structure of electrode materials is essential to design catalysts and enhance their activity. Therefore, spherical gold nanoparticles (GNSs) with a mean diameter from 4 to 15 nm were synthesized. UV/Vis spectroscopy, transmission electron microscopy, and under‐potential deposition of lead (UPD_Pb) were used to determine the morphology, size, and surface crystallographic structure of the GNSs. The UPD_Pb revealed that their crystallographic facets are affected by their size and the growth process. The catalytic properties of these GNSs toward glucose electrooxidation were studied by cyclic voltammetry, taking into account the scan rate and temperature effects. The results clearly show the size‐dependent electrocatalytic activity for glucose oxidation reactions that are controlled by diffusion. Small GNSs with an average size of 4.2 nm exhibited high catalytic activity. This drastic increase in activity results from the high specific area and reactivity of the surface electrons induced by their small size. The reaction mechanism was investigated by in situ Fourier transform infrared reflectance spectroscopy. Gluconolactone and gluconate were identified as the intermediate and the final reaction product, respectively, of the glucose electrooxidation.     

Oxygen‐Tolerant Electrodes with Platinum‐Loaded Covalent Triazine Frameworks for the Hydrogen Oxidation Reaction

Reducing the use of platinum (Pt) on polymer electrolyte fuel cell anodes is critical for the widespread dissemination of these energy conversion systems. Although Pt usage can be minimized by the even dispersion of isolated Pt atoms, no atomically dispersed Pt catalysts that promote hydrogen oxidation at a rate required for practical fuel cells have been reported to date. Covalent triazine frameworks with atomically dispersed Pt atoms (0.29 wt %) are described and it is demonstrated that the material has a high electrocatalytic hydrogen oxidation activity without an overpotential. Importantly, when the loading amount was increased to 2.8 wt %, the electrocatalytic hydrogen oxidation activity of the resulting electrode was comparable to that of commercial carbon supported 20 wt % Pt catalysts, and the catalytic activity for oxygen reduction was markedly reduced. Thus, Pt‐modified covalent triazine frameworks selectively catalyze hydrogen oxidation, even in the presence of dissolved oxygen, which is critical for limiting cathode degradation during the start–stop cycles of fuel cells.     

Catalytic Activity Towards Hydrogen Evolution Dependent of the Degree of Conjugation and Absorption of Six Organic Chromophores

Conjugated materials can, in many cases, absorb visible light because of their delocalized π electron system. Such materials have been widely used as a photoactive layers in organic photovoltaic devices and as photosensitizers in dye-sensitized solar cells. Additionally, these materials have been reported for applications in solar fuel production, working as photocatalysts for the hydrogen evolution reaction (HER). The synthesis of three flexible vinyl groups-containing chromophores is reported. The catalytic activity towards hydrogen evolution of these chromophores has been investigated and compared to their non-vinyl-containing analogues. The catalytic effect was confirmed using two different approaches: electrochemical, using the chromophores to modify a working electrode, and photocatalytic, using the chromophores combined with platinum nanoparticles. A relationship between the degree of conjugation and the catalytic activity of the chromophores has been observed with the electrochemical method, while a relationship between the UV absorption in the solid state and the photocatalytic effect with platinum nanoparticles was observed.     

Carbon Monoxide Oxidation on Pt Single Crystal Electrodes: Understanding the Catalysis for Low Temperature Fuel Cells

Herein the general concepts of fuel cells are discussed, with special attention to low temperature fuel cells working in alkaline media. Alkaline low temperature fuel cells could well be one of the energy sources in the next future. This technology has the potential to provide power to portable devices, transportation and stationary sectors. With the aim to solve the principal catalytic problems at the anode of low temperature fuel cells, a fundamental study of the mechanism and kinetics of carbon monoxide as well as water dissociation on stepped platinum surfaces in alkaline medium is discussed and compared with those in acidic media. Furthermore, cations involved as promoters for catalytic surface reactions are also considered. Therefore, the aim of the present work is not only to provide the new fundamental advances in the electrocatalysis field, but also to understand the reactions occurring at fuel cell catalysts, which may help to improve the fabrication of novel electrodes in order to enhance the performance and to decrease the cost of low temperature fuel cells.     

Influence of Substrate Steps on the Catalytic Properties of Pt Layers: The Ethanol Electrooxidation Reaction

The ethanol oxidation reaction (EOR) is investigated on Pt/Au(hkl) electrodes. The Au(hkl) single crystals used belong to the [n(111)x(110)] family of planes. Pt is deposited following the galvanic exchange of a previously deposited Cu monolayer using a Pt²⁺ solution. Deposition is not epitaxial and the defects on the underlying Au(hkl) substrates are partially transferred to the Pt films. Moreover, an additional (100)‐step‐like defect is formed, probably as a result of the strain resulting from the Pt and Au lattice mismatch. Regarding the EOR, both vicinal Pt/Au(hkl) surfaces exhibit a behavior that differs from that expected for stepped Pt; for instance, the smaller the step density on the underlying Au substrate, the greater the ability to break the C?C bond in the ethanol molecule, as determined by in situ Fourier transform infrared spectroscopy measurements. Also, we found that the acetic acid production is favored as the terrace width decreases, thus reflecting the inefficiency of the surface array to cleave the ethanol molecule.     

无表面活性剂条件下一锅法制备金属/氧化锌复合材料用于催化二氧化碳加氢制甲醇反应

Catalytic hydrogenation of CO₂ to methanol is an important chemical process owing to its contribution in alleviating the impacts of the greenhouse effect and in realizing the requirement for renewable energy sources. Owing to their excellent synergic functionalities and unique optoelectronic as well as catalytic properties, transition metal/ZnO (M/ZnO) nanocomposites have been widely used as catalysts for this reaction in recent years. Development of size-controlled synthesis of metal/oxide complexes is highly desirable. Further, because it is extremely difficult to achieve the strong-metal-support-interaction (SMSI) effect when the M/ZnO nanocomposites are prepared via physical methods, the use of chemical methods is more favorable for the fabrication of multi-component catalysts. However, because of the requirement for an extra H₂ reduction step to obtain the active metallic phase (M) and surfactants to control the size of nanoparticles, most M/ZnO nanocomposites undergo two- or multi-step synthesis, which is disadvantageous for the stable catalytic performance of the M/ZnO nanocomposites. In this work, we demonstrate facile one-pot synthesis of M/ZnO (M = Pd, Au, Ag, and Cu) nanocomposites in refluxed ethylene glycol as a solvent, without using any surfactants. During the synthesis process, Pd and ZnO species can stabilize each other from further aggregation by reducing their individual surface energies, thereby achieving size control of particles. Besides, NaHCO₃ serves as a size-control tool for Pd nanoparticles by adjusting the alkaline conditions. Ethylene glycol serves as a mild reducing agent and solvent owing to its capacity to reduce Pd ions to generate Pd crystals. The nucleation and growth of Pd particles are achieved by thermal reduction, while the ZnO nanocrystals are formed by thermal decomposition of Zn(OAc)₂. X-ray diffraction patterns of the M/ZnO and ZnO were analyzed to study the phase of the nanocomposites, and the results show that no impurity phase was detected. Transmission electron microscopy (TEM) was used to study the morphology and structural properties. In addition, X-ray photoelectron spectroscopy analysis was performed to further confirm the formation of M/ZnO hybrid materials, and the results confirm SMSI between Pd and ZnO. Inductively coupled plasma mass spectrometry was used to check the actual elemental compositions, and the results show that the detected atomic ratios of Pd/Zn were consistent with the values in the theoretical recipe. To investigate the effects of the Pd/Zn molar ratios and the added amount of NaHCO₃ on Pd size, the average sizes of Pd particles were calculated, and the results were confirmed by TEM observation. The Cu/ZnO/Al₂O₃ composite is a widely known catalyst for hydrogenation of CO₂ to methanol, and other M/ZnO composites are also catalytic for this reaction. Therefore, different M/ZnO hybrids were further studied as catalysts for hydrogenation of CO₂ to methanol, among which Pd/ZnO (1 : 9) demonstrated the best performance (30% CO₂ conversion, 69% methanol selectivity, and 421.9 g_methanol·(kg catalyst·h)^-1 at 240 ℃ and 5 MPa. The outstanding catalytic performance may be explained by the following two factors: first, Pd is a good catalyst for the dissociation of H₂ to give active H atoms, and second, SMSI between Pd and ZnO favors the formation of surface oxygen vacancies on ZnO. Moreover, most M/ZnO composites exhibit excellent performance in methanol selectivity, especially the Au/ZnO catalyst, which has the highest methanol selectivity (82%) despite having the lowest CO₂ conversion. Hopefully, this work would provide a simple route for synthesis of M/ZnO nanocomposites with clean surfaces for catalysis.     

电化学合成Pt-Au复合催化剂及其对甲醇的电催化氧化

在ITO导电玻璃上, 采用循环伏安法制备Pt-Au复合催化剂. 通过扫描电镜(SEM), X射线能量色散谱(EDX), X射线衍射(XRD)及其电化学方法对催化剂样品进行了表征. SEM结果表明, Pt-Au复合催化剂的形貌近似球状粒子. 循环伏安法和计时电流法的测试结果表明, 复合催化剂中Au的加入有利于甲醇的电催化氧化, 并提高了Pt对甲醇氧化的抗毒化能力. 同时研究了复合催化剂中Au的不同含量对甲醇氧化的影响, 结果表明, 当 Pt和Au物质的量比为1.07∶1时, Pt-Au/ITO催化剂具有最佳的甲醇电催化氧化活性.