Solid state reduction of chromium (VI) pollution for Al2O3–Cr metal ceramics application

Reduction of chromium (VI) from Na₂CrO₄ through aluminothermic reaction and fabrication of metal-ceramic materials from the reduction products have been investigated in this study. Na₂CrO₄ could be successfully reduced into micrometer-sized Cr particles in a flowing Ar atmosphere in presence of Al powder. The conversion ratio of Na₂CrO₄ to metallic Cr attained 96.16% efficiency. Al₂O₃–Cr metal-ceramic with different Cr content (5 wt%, 10 wt%, 15 wt%, 20 wt%) were further prepared from the reduction product Al₂O₃–Cr composite powder, and aluminum oxide nanopowder via pressure-less sintering. The phase composition, microstructure and mechanical properties of metal-ceramic composites were characterized to ensure the potential of the Al₂O₃–Cr composite powder to form ceramic materials. The highest relative density and bending strength can reach 93.4% and 205 MP, respectively. The results indicated that aluminothermic reduction of chromium (VI) for metal-ceramics application is a potential approach to remove chromium (VI) pollutant from the environment.     

Novel clays: Solid-state synthesis,characterization and cation exchange selectivity

Several novel swelling mica-type clays have been synthesized by solid-state processes. Synthetic clays of ideal compositions such as Na₂Si₆Al₂Mg₆O₂₀F₄ · xH₂O (Na-2-mica), Na₃Si₅Al₃Mg₆O₂₀F₄ · xH₂O (Na-3-mica) and Na₄Si₄Al₄Mg₆O₂₀F₄ · xH₂O (Na-4-mica) have been prepared and characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and ²⁷Al and ²⁹Si solid-state magic angle spinning nuclear magnetic resonance (MASNMR) spectroscopy. Powder XRD showed that all syntheses yielded water swollen micas with c-axis spacing of ∼1.2 nm except in the case of Na-2-mica which also showed a small peak of anhydrous mica phase with a c-axis spacing of 0.96 nm. Solid-state ²⁷Al MASNMR spectroscopy revealed that almost all the Al is present in the tetrahedral environment of the different micas. Solid-state ²⁹Si MASNMR spectroscopy revealed different Si (Al) nearest neighbor environments depending upon the composition of the various micas. Selective cation exchange studies were performed on the various micas using 0.5 N NaCl solution containing 12.9 ppm Sr²⁺ or 8.12 ppm of La³⁺. The results showed, for the first time, that Na-3-mica has a high selectivity for the trivalent cation tested. The previously reported high selectivity of these synthetic micas for the divalent cations has been confirmed. These selective cation exchange studies are of relevance in cation separations from drinking and waste waters.     

Thin-film formation of Si clathrates on Si wafers

In this study, we prepared Si clathrate films (Na₈Si₄₆ and Na_xSi₁₃₆) using a single-crystalline Si substrate. Highly oriented film growth of Zintl-phase sodium silicide, which is a precursor of Si clathrate, was achieved by exposing Na vapour to Si substrates under an Ar atmosphere. Subsequent heat treatment of the NaSi film at 400 °C (3 h) under vacuum (<10⁻² Pa) resulted in a film of Si clathrates having a thickness of several micrometres. Furthermore, this technique enabled the selective growth of Na₈Si₄₆ and Na_xSi₁₃₆ using the appropriate crystalline orientation of Si substrates.     

Synthesis and characterization of Eu2+ activated X12Al10.6Si3.4O32Cl5.4 (X=Sr,Ca) phosphors

In this article, we have reported emission characteristics of Eu²⁺ activated Sr₁₂Al_10.6Si_3.4O₃₂Cl_5.4 and Ca₁₂Al_10.6Si_3.4O₃₂Cl_5.4 phosphors, prepared by combustion synthesis. The PL excitation was monitored at two different wavelengths 254 nm (mercury excitation) and 354 nm (mercury free excitation), which shows broad-blue emission bands at 432 nm, and 438 nm for 354 nm excitation wavelength. Under mercury excitation at 254 nm it shows emission wavelengths at 470 nm, 589 nm, 592 nm, and 617 nm for the prepared Sr₁₂Al_10.6Si_3.4O₃₂Cl_5.4 and Ca₁₂Al_10.6Si_3.4O₃₂Cl_5.4 phosphors. Further it was characterized by XRD, for the investigation of phase and purity of the phosphors. Thermal degradation of the phosphors was also studied at different temperatures.     

Combined XPS,electrochemical and Kelvin probe measurements of NaY zeolite

In the present study X-ray Photoelectron Spectroscopy (XPS) combined with in situ electrochemical and Kelvin probe measurements was used in order to get a deeper insight on the mechanism of the cation transport through NaY zeolite and the charge transfer through the Au electrode/zeolite interface. It is shown that by imposing a potential gradient across the NaY powder which is sandwiched between two electrodes, Na⁺ ions can be electrically transferred to or from the Au working electrode area, following the direction of the applied potential between the two electrodes. Two peaks corresponding to sodium species were detected by means of in situ XPS investigation during potential application. The first peak of Na1s photoelectrons with binding energy at 1072.2 ± 0.2 eV is attributed to Na adsorbed on the grounded Au electrode with its coverage remaining unchanged upon potential imposition. The second peak is directly associated with Na present in the zeolite and upon potential application its binding energy varies proportionally with the variation of the surface potential measured by Kelvin probe. Upon varying the potential from − 4 to + 4 V between the working and counter electrode, the Na⁺ concentration decreases by ca30% at the Au/zeolite interface. However the invariant amount of Na on the Au electrode under vacuum shows that the variation in Na⁺ concentration is not due to ionic transfer onto the Au surface but instead Na⁺ accumulation can be assumed at the Au/zeolite interface. On the other hand, current or potential application under O₂ atmosphere promotes the electrocatalytic reaction of Na⁺ towards the formation of Na₂O on the Au electrode surface.     

Effect of Sr2+-doping on structure and luminescence properties of BaAl2Si2O8:Eu2+ phosphors

Sr²⁺ doped BaAl₂Si₂O₈:Eu²⁺ phosphor was synthesized by chemical co-precipitation method. With the increase of Sr²⁺ concentration, the phase structure of (Ba_0.965 ? xSr_xEu_0.035)Al₂Si₂O₈ changes from hexagonal phase to monoclinic phase owing to large activation energy in SrAl₂Si₂O₈ system. (Ba_0.965 ? xSr_xEu_0.035)Al₂Si₂O₈ phosphor exhibits a broad blue band peaking at 425 nm due to the 4f⁶5d–4f⁷(⁸S_7/2) transition of Eu²⁺ ions. The emission intensity increases, accompanied by the blue shift of emission maximum from 459 to 417 nm with the Sr²⁺ doping concentration increasing. The optimal concentration of Sr²⁺ ion is 40%, and the phosphor shows high color stability in CIE chromaticity diagram. The result indicates that Sr²⁺ doped phosphor not only can enhance the relative intensity but also can adjust the chromaticity coordinate.     

Electrical conductivity and thermal expansion of the oxy-cuspidine Gd4Al2O9 substituted with Ca and Sr

The series of Gd_4 ? xM_xAl₂O_9 ? x/2 (M = Ca, Sr) with x = 0, 0.01, 0.05, 0.10 and 0.25 was prepared by the citrate complexation method. Both Gd_4 ? xCa_xAl₂O_9 ? x/2 and Gd_4 ? xSr_xAl₂O_9 ? x/2 show the monoclinic cuspidine structure with space group of P2₁/c up to 0.05–0.1 and 0.01–0.05 mol for Ca and Sr, respectively. Beyond the substitution limit of Gd₄Al₂O₉, GdAlO₃ and SrGd₂Al₂O₇ appear as additional phases. The highest electrical conductivity obtained at 900 °C yielded σ = 1.49 × 10^? 4 S/cm for Gd_3.95Ca_0.05Al₂O_8.98. In comparison, the conductivity of pure Gd₄Al₂O₉ was σ = 1.73 × 10^? 5 S/cm. The conductivities determined are in a similar range as those of other cuspidine materials investigated previously. The thermal expansion coefficient of Gd₄Al₂O₉ at 1000 °C was 7.4 × 10^? 6 K^? 1. The phase transition between 1100 and 1200 °C reported earlier changes with increasing substitution of Ca and Sr.     

Preparation of (5.0%)Er3+:Y3Al5O12/Pt-(TiO2-Ta2O5) nanocatalysts and application in sonocatalytic decomposition of ametryn in aqueous solution

(5.0%)Er³⁺:Y₃Al₅O₁₂/Pt-(TiO₂-Ta₂O₅) powder, as a high effective sonocatalyst, was prepared using sol-gel and calcination method. Then it was characterized by X-ray diffractometer (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX). In order to evaluate the sonocatalytic activity of the prepared (5.0%)Er³⁺:Y₃Al₅O₁₂/Pt-(TiO₂-Ta₂O₅) powder, the sonocatalytic decomposition of ametryn was studied. In addition, some influencing factors such as different Ti/Ta molar ratios on the sonocatalytic activity of the prepared (5.0%)Er³⁺:Y₃Al₅O₁₂/Pt-(TiO₂-Ta₂O₅) powder, catalyst added amount with ultrasonic irradiation time and used times on the sonocatalytic decomposition efficiency were examined by using ion chromatogram determination. The experimental results showed that the best sonocatalytic decomposition ratio of ametryn were 77.50% based on the N atom calculation and 95.00% based on the S atom calculation, respectively, when the conditions of 10.00 mg/L initial concentration, 1.00 g/L prepared (5.0%)Er³⁺:Y₃Al₅O₁₂/Pt-(TiO₂-Ta₂O₅) powder (Ti/Ta = 1.00:0.25 heat-treated at 550 °C for 3.0 h) added amount, 150 min ultrasonic irradiation (40 kHz frequency and 300 W output power), 100 mL total volume and 25–28 °C temperature were adopted. Therefore, the (5.0%)Er³⁺:Y₃Al₅O₁₂/Pt-(TiO₂-Ta₂O₅) composite nanoparticles could be considered as an effective sonocatalyst for decomposition of ametryn in aqueous solution.     

Luminescence behaviour of beryl (aquamarine variety) from Turkey

Natural blue-green beryl from Turkey has been investigated using scanning electron microscopy-energy-dispersive spectroscopy (SEM-EDS), X-ray diffraction (XRD) and Cathodoluminescence (CL). Beryl has the chemical formula Be₃Al₂Si₆O₁₈ and is hexagonal with space group P6/mcc. Chemical analyses of the beryl sample utilised inductively coupled plasma-atomic emission spectroscopy (ICP-AES) for major oxides and trace elements. It shows that the beryl sample is rich in Cs (531 ppm) and contains low concentrations of transition-metal ions, in total 2.29 wt.% Fe, 269 ppm Mn, V<5 ppm and Cr 20 ppm. Ideas on the origin of the green colour of this mineral are presented. The CL spectrum of the bulk sample display intense broad band emission from ～360 to ～800 nm.     

Ionic conductivities of Nasicon-type glass-ceramic superionic conductors in the system Na2O–Y2O3–XO2–SiO2 (X = Ti,Ge, Te)

Glass-ceramics of the titanium-, germanium- or tellurium-containing Na₅RSi₄O₁₂-type (R = rare earth; Y) Na⁺-superionic conductors (N5YXS) were prepared by crystallization of glasses with the composition Na_3+3xY_1 ? xX_ySi_3 ? yO₉ (X = Ti; NYTiS, Ge; NYGeS, X = Te; NYTeS), and the effects of X elements on the separation of the phase and the microstructural effects on the conduction properties of glass-ceramics were discussed. The combination of x and y was most varied in N5YGeS and more limited in the order of N5YTeS > N5YTiS. Their conductivities and activation energies are of the order of 10^? 2 S/cm at 300 °C and of 15 to 24 kJ/mol, respectively. The conductivity of the glass-ceramic N5YXS decreases giving the order N5YGeS > N5YTeS > N5YTiS. It is considered that this order corresponds to the N5 single phase region. Large enhancement of electrical conductivity was observed in the glass-ceramics as the grain growth was promoted with increase of heating temperature and heating time for crystallization.     

Theoretical investigation of the inversion parameter in Co3 − sAlsO4 (s = 0–3) spinel structures

The structural, energetic, and thermodynamic properties of the Co_3 ? sAl_sO₄ (s = 0, 1, 2, and 3) crystal family are studied using periodic DFT calculations. We provide a quantitative discussion of the cation distribution effect on the cell parameter, the oxygen Wyckoff position, the interatomic distances and the energies of the structures. It is demonstrated that the low cobalt containing CoAl₂O₄ spinel is the most stable structure of the Co_3 ? sAl_sO₄ (s = 0, 1, 2, and 3) crystal family.     

Sonochemical fabrication of Fe3O4 nanoparticles on reduced graphene oxide for biosensors

This study synthesized Fe₃O₄ nanoparticles of 30–40 nm by a sonochemical method, and these particles were uniformly dispersed on the reduced graphene oxide sheets (Fe₃O₄/RGO). The superparamagnetic property of Fe₃O₄/RGO was evidenced from a saturated magnetization of 30 emu/g tested by a sample-vibrating magnetometer. Based on the testing results, we proposed a mechanism of ultrasonic waves to explain the formation and dispersion of Fe₃O₄ nanoparticles on RGO. A biosensor was fabricated by modifying a glassy carbon electrode with the combination of Fe₃O₄/RGO and hemoglobin. The biosensor showed an excellent electrocatalytic reduction toward H₂O₂ at a wide, linear range from 4 × 10^?6 to 1 × 10^?3 M (R² = 0.994) as examined by amperometry, and with a detection limit of 2 × 10^?6 M. The high performance of H₂O₂ detection is attributed to the synergistic effect of the combination of Fe₃O₄ nanoparticles and RGO, promoting the electron transfer between the peroxide and electrode surface.     

The sonochemical decolourisation of textile azo dye Orange II: Effects of Fenton type reagents and UV light

The removal of Orange II (O-II) from aqueous solution under irradiation at 850 kHz has been studied. The effects of both homogeneous (with FeSO₄/H₂O₂)_, and heterogeneous (Fe containing ZSM-5 zeolite/H₂O₂) Fenton type reagents are reported together with the effect of UV irradiation in combination with ultrasound both alone and with homogeneous Fenton-type reagent.Degrees of decolourisation of 6.5% and 28.9% were observed using UV radiation and ultrasound, respectively, whereas under the simultaneous irradiation of ultrasound and UV light, the decolourisation degree reached 47.8%, indicating a synergetic effect of ultrasound and UV light. The decolourisation was increased with the addition of Fenton’s reagent with an optimal Fenton molar reagent ratio, Fe²⁺:H₂O₂ of 1:50. In the combined process of ultrasound and UV light with the homogeneous Fenton system 80.8% decolourisation could be achieved after 2 h indicating that UV improves this type of Orange II degradation. The degree of decolourisation obtained using the heterogeneous sono-Fenton system (Fe containing ZSM-5 zeolite catalysts + H₂O₂ + ultrasound) were consistently lower than the traditional homogeneous ultrasound Fenton system. This can be attributed to the greater difficulty of the reaction between Fe ions and hydrogen peroxide.In all cases the Orange II ultrasonic decolourisation was found to follow first order kinetics.     

Molecular weight distribution,rheological property and structural changes of sodium alginate induced by ultrasound

In this study, the effects of ultrasound with different ultrasonic frequencies on the properties of sodium alginate (ALG) were investigated, which were characterized by the means of the multi-angle laser light scattering photometer analysis (GPC-MALLS), rheological analysis, circular dichroism (CD) spectrometer and scanning electron microscope (SEM). It showed that the molecular weight (M_w) and molecular number (M_n) of the untreated ALG was 1.927 × 10⁵ g/mol and 4.852 × 10⁴ g/mol, respectively. The M_w of the ultrasound treated ALG was gradually increased from 3.50 × 10⁴ g/mol to 7.34 × 10⁴ g/mol while the M_n of ALG was increased and then decreased with the increase of the ultrasonic frequency. The maximum value of M_n was 9.988 × 10⁴ g/mol when the ALG was treated by ultrasound at 40 kHz. It indicated that ultrasound could induce ALG degradation and rearrangement. The number of the large molecules and small molecules of ALG was changed by ultrasound. The value of d_n/d_c suggested that the ultrasound could enhance the stability of ALG. Furthermore, it was found that ALG treated by ultrasound at 50 kHz tended to be closer to a Newtonian behavior, while the untreated and treated ALG solutions exhibited pseudoplastic behaviours. Moreover, CD spectra demonstrated that ultrasound could be used to improve the strength of the gel by changing the ratio of M/G, which showed that the minimum ratio of M/G of ALG treated at 135 kHz was 1.34. The gel-forming capacity of ALG was correlated with the content of G-blocks. It suggested that ALG treated by ultrasound at 135 kHz was stiffer in the process of forming gels. The morphology results indicated that ultrasound treatment of ALG at 135 kHz increased its hydrophobic interaction and interfacial activity. This study is important to explore the effect of ultrasound on ALG in improving the physical properties of ALG as food additives, enzyme and drug carriers.     

Field-assisted sustainable O− ion emission from fluorine-substituted 12CaO·7Al2O3 with improved thermal stability

We examined the electric field-assisted thermionic emission of atomic oxygen radical anion (O^?) in a vacuum from fluorine-substituted derivatives of 12CaO·7Al₂O₃ (C12A7) with a composition of (12 ? x)CaO·7Al₂O₃·xCaF₂ (0 ≤ x ≤ 0.8). Unsubstituted C12A7 easily decomposed into 5CaO?3Al₂O₃ (C5A3) and 3CaO?Al₂O₃ (C3A) above 830 °C during the emission experiment in a vacuum. The decomposition temperature range became narrower as the amount of F^? ion substitution increased, e.g. the sample with x = 0.4 kept a single phase after the emission experiment at 900 °C. The emitted anionic species from the x = 0.4 sample were dominated by O^? ions (～ 92%) together with a small amount of O₂^? ions (～ 4%) and F^? ions (～ 4%). The absence of an O₂ gas supply to the opposite side of the emission surface led to a nearly steady co-emission of O^? ions and electrons with a ratio of < 1/1. The O₂ gas supply markedly enhanced the O^? ion emission, and suppressed the electron emission. A sustainable and high-purity O^? ion emission with a current density of 11 nA cm^? 2 was achieved at 830 °C with the supply of 40 Pa O₂ gas. The similarity in these emission features to the unsubstituted C12A7, together with the improved thermal stability demonstrates that the F^? ion-substituted C12A7 is a promising material for higher intensity O^? ion emission at higher temperatures.     

Influence of the antireflection,window, and active layers on optical properties of exponential-doping transmission-mode GaAs photocathode modules

In order to well study the influence of the thickness and doping concentration on optical properties of transmission-mode GaAs photocathode, three exponential-doping and one uniform-doping photocathode modules were prepared by molecular beam epitaxy with a structure of glass/Si₃N₄/Ga_1 ? xAl_xAs/GaAs. By use of the spectrophotometer, the optical properties were separately measured including the reflectivity and transmissivity curves. Based on thin film optical principles, the optical properties and their integral values are calculated by matrix formula for the four-layer photocathode module. The result shows that the antireflection and window layers affect the peak and valley of the optical property curves and the active layer influences the absorptivity values of the transmission-mode cathode modules. The photocathode module has high absorptivity within the response waveband when the optimal module has the Si₃N₄ antireflection layer of 0.1 μm, the Ga_1 ? xAl_xAs window layer of more than 0.4 μm, and the GaAs active layer of 1.5 μm–2 μm and low average doping concentration.     

Ionic and electronic conductivities,stability and thermal expansion of La10 − x(Si,Al)6O26 ± δ solid electrolytes

Apatite-type La_10 − xSi_6 − yAl_yO_{27 − 3x/2 − y/2} (x = 0–0.33; y = 0.5–1.5) exhibit predominant oxygen ionic conductivity in a wide range of oxygen partial pressures. The conductivity of silicates containing 26.50–26.75 oxygen atoms per formula unit is comparable to that of gadolinia-doped ceria at 770–870 K. The average thermal expansion coefficients are (8.7–10.8) × 10^− 6 K^− 1 at 373–1273 K. At temperatures above 1100 K, silicon oxide volatilization from the surface layers of apatite ceramics and a moderate degradation of the ionic transport with time are observed under reducing conditions, thus limiting the operation temperature of Si-containing solid electrolytes.     

Effect of low frequency ultrasound on the surface properties of natural aluminosilicates

Structural and surface properties of different natural aluminosilicates (layered, chain and framework structural types) exposed of 20 kHz ultrasound irradiation (0–120 min) in aqueous and 35 wt%. aqueous H₂O₂ dispersions were studied by X-ray diffraction (XRD), dynamic light scattering (DLS), nitrogen adsorption–desorption, thermal analysis, and Fourier transform infrared spectroscopy (FTIR) techniques. It was confirmed that sonication caused slight changes in the structure of investigated minerals whereas their textural properties were significantly affected. The aqueous dispersions of montmorillonite (Mt), clinoptilolite (Zlt), glauconite (Glt) and palygorskite (Pal) were represented by several particles size fractions according to DLS-study. Ultrasound irradiation produced a decrease of the average particle diameter by 4–6 times in water and by 1.3–5 times in H₂O₂ dispersions except for Pal, which underwent strong agglomeration. A significant increase of total pore volume and pore diameter was observed for Glt sonicated in H₂O₂ dispersions whereas for Pal mainly micropore volume sharply increased in both aqueous and H₂O₂ dispersions.     

Sonocatalytic rapid degradation of Congo red dye from aqueous solution using magnetic Fe0/polyaniline nanofibers

Nano-sized magnetic Fe⁰/polyaniline (Fe⁰/PANI) nanofibers were used as an effective material for sonocatalytic degradation of organic anionic Congo red (CR) dye. Fe⁰/PANI_, was synthesized via reductive deposition of nano-Fe⁰ onto the PANI nanofibers at room temperature. Prepared catalyst was characterized using HR-TEM, FE-SEM, XRD, FTIR instruments. The efficacy of catalyst in removing CR was assessed colorimetrically using UV–visible spectroscopy under different experimental conditions such as % of Fe⁰ loading into the composite material, solution pH, initial concentration of dye, catalyst dosage, temperature and ultrasonic power. The optimum conditions for sonocatalytic degradation of CR were obtained at catalyst concentrations = 500 mg.L⁻¹, concentration of CR = 200 ppm, solution pH = neutral (7.0), temperature = 30 °C, % of Fe⁰ loading = 30% and 500 W ultrasonic power. The experimental results showed that ultrasonic process could remove 98% of Congo red within 30 min with higher Q_max value (Q_max = 446.4 at 25 °C). The rate of degradation of CR dye was much faster in this ultrasonic technique rather than conventional adsorption process. The degradation efficiency declined with the addition of common inorganic salts (NaCl, Na₂CO₃, Na₂SO₄ and Na₃PO₄). The rate of degradation suppressed more with increasing salt concentration. Kinetic and isotherm studies indicated that the degradation of CR provides pseudo-second order rate kinetic and Langmuir isotherm model compared to all other models tested. The excellent high degradation capacity of Fe⁰/PANI under ultrasonic irradiation can be explained on the basis of the formation of active hydroxyl radicals (OH) and subsequently a series of free radical reactions.     

Solid state interactions in nano-sized oxides

Comparative study of reactivity of nano- and micro-sized alumina and nickel oxide, obtained by the electrical explosion of metal wires in oxidizing atmosphere, was carried out for the reactions NiO + MoO₃, NiO + Al₂O₃, and Al₂O₃ + Bi₂O₃ by coupled anneals of ceramics, measurements of the conductivity of individual oxides and raw oxide mixtures, X-ray diffraction and differential thermal analysis. The total conductivity of nano-structured oxides was found lower than that of micro-structured ceramics. Mixing bismuth oxide with nano-structured alumina leads to stabilization of the low temperature polymorph α-Bi₂O₃ up to 780 °C. The diffusion permeability of NiMoO₄ layer grown at the surface of NiO ceramics, having submicron grains, was found 2 times lower if compared to NiMoO₄ grown at micro-sized NiO ceramics. NiO and Al₂O₃ nano-powders preserve the high reactivity even when heated up to 1000 °C. The results are discussed in terms of size effects on the solid state reactivity of oxides.