Direct oxidation of L-cysteine by [FeIII(bpy)2(CN)2]+ and [FeIII(bpy)(CN)4]-

The oxidation of L-cysteine by the outer-sphere oxidants [Fe(bpy)2(CN)2]+ and [Fe(bpy)(CN)4]- in anaerobic aqueous solution is highly susceptible to catalysis by trace amounts of copper ions. This copper catalysis is effectively inhibited with the addition of 1.0 mM dipicolinic acid for the reduction of [Fe(bpy)2(CN)2]+ and is completely suppressed with the addition of 5.0 mM EDTA (pH<9.00), 10.0 mM EDTA (9.010.0) for the reduction of [Fe(bpy)(CN)4]-. 1H NMR and UV-vis spectra show that the products of the direct (uncatalyzed) reactions are the corresponding Fe(II) complexes and, when no radical scavengers are present, L-cystine, both being formed quantitatively. The two reactions display mild kinetic inhibition by Fe(II), and the inhibition can be suppressed by the free radical scavenger PBN (N-tert-butyl-alpha-phenylnitrone). At 25 degrees C and micro=0.1 M and under conditions where inhibition by Fe(II) is insignificant, the general rate law is -d[Fe(III)]/dt=k[cysteine]tot[Fe(III)], with k={k2Ka1[H+]2+k3Ka1Ka2[H+]+k4Ka1Ka2Ka3{/}[H+]3+Ka1[H+]2+Ka1Ka2[H+]+Ka1Ka2Ka3}, where Ka1, Ka2, and Ka3 are the successive acid dissociation constants of HSCH2CH(NH3+)CO2H. For [Fe(bpy)2(CN)2]+, the kinetics over the pH range of 3-7.9 yields k2=3.4+/-0.6 M(-1) s(-1) and k3=(1.18+/-0.02)x10(6) M(-1) s(-1) (k4 is insignificant in the fitting). For [Fe(bpy)(CN)4]- over the pH range of 6.1-11.9, the rate constants are k3=(2.13+/-0.08)x10(3) M(-1) s(-1) and k4=(1.01+/-0.06)x10(4) M(-1) s(-1) (k2 is insignificant in the fitting). All three terms in the rate law are assigned to rate-limiting electron-transfer reactions in which various thiolate forms of cysteine are reactive. Applying Marcus theory, the self-exchange rate constant of the *SCH2CH(NH2)CO2-/-SCH2CH(NH2)CO2- redox couple was obtained from the oxidation of L-cysteine by [Fe(bpy)(CN)4]-, with k11=4x10(5) M(-1) s(-1). The self-exchange rate constant of the *SCH2CH(NH3+)CO2-/-SCH2CH(NH3+)CO2- redox couple was similarly obtained from the rates with both Fe(III) oxidants, a value of 6x10(6) M(-1) s(-1) for k11 being derived. Both self-exchange rate constants are quite large as is to be expected from the minimal rearrangement that follows conversion of a thiolate to a thiyl radical, and the somewhat lower self-exchange rate constant for the dianionic form of cysteine is ascribed to electrostatic repulsion.     

Electronic structure of mononuclear bis(1,2-diaryl-1,2-ethylenedithiolato)iron complexes containing a fifth cyanide or phosphite ligand: a combined experimental and computational study

A series of mononuclear square-based pyramidal complexes of iron containing two 1,2-diaryl-ethylene-1,2-dithiolate ligands in various oxidation levels has been synthesized. The reaction of the dinuclear species [Fe(III)2(1L*)2(1L)2]0, where (1L)2- is the closed shell di-(4-tert-butylphenyl)-1,2-ethylenedithiolate dianion and (1L*)1- is its one-electron-oxidized pi-radical monoanion, with [N(n-Bu)4]CN in toluene yields dark green crystals of mononuclear [N(n-Bu)4][Fe(II)(1L*)2(CN)] (1). The oxidation of 1 with ferrocenium hexafluorophosphate yields blue [Fe(III)(1L*)2(CN)] (1ox), and analogously, a reduction with [Cp2Co] yields [Cp2Co][N(n-Bu)4][Fe(II)(1L*)(1L)(CN)] (1red); oxidation of the neutral dimer with iodine gives [Fe(III)(1L*)2I] (2). The dimer reacts with the phosphite P(OCH3)3 to yield [Fe(II)(1L*)2{P(OCH3)3}] (3), and [Fe(III)2(3L*)2(3L)2] reacts with P(OC6H5)3 to give [Fe(II)(3L*)2{P(OC6H5)3}] (4), where (3L)2- represents 1,2-diphenyl-1,2-ethylenedithiolate(2-). Both 3 and 4 were electrochemically one-electron oxidized to the monocations 3ox and 4ox and reduced to the monoanions 3red and 4red. The structures of 1 and 4 have been determined by X-ray crystallography. All compounds have been studied by magnetic susceptibility measurements, X-band EPR, UV-vis, IR, and M?ssbauer spectroscopies. The following five-coordinate chromophores have been identified: (a) [Fe(III)(L*)2X]n, X = CN-, I- (n = 0) (1ox, 2); X = P(OR)3 (n = 1+) )3ox, 4ox) with St = 1/2, SFe = 3/2; (b) [Fe(II)(L*)2X]n, X = CN-, (n = 1-) (1); X = P(OR)3 (n = 0) (3, 4) with St = SFe = 0; (c) [Fe(II)(L*)(L)X]n <--> [Fe(II)(L)(L*)X]n, X = CN- (n = 2-) (1red); X = P(OR)3 (n = 1-) (3red, 4red) with St = 1/2, SFe = 0 (or 1). Complex 1ox displays spin crossover behavior: St = 1/2 <--> St = 3/2 with intrinsic spin-state change SFe = 3/2 <--> SFe = 5/2. The electronic structures of 1 and 1(ox) have been established by density functional theoretical calculations: [Fe(II)(1L*)2(CN)]1- (SFe = 0, St = 0) and [Fe(III)(1L*)2(CN)]0 (SFe = 3/2, St = 1/2).     

4,2-Ribbon like ferromagnetic cyano-bridged Fe(III)2Ni(II) chains: a magneto-structural study

The low-spin iron(III) complex AsPh(4)[Fe(III)(bpy)(CN)(4)].CH(3)CN (1) [AsPh(4) = tetraphenylarsonium cation] and the heterobimetallic chains [{Fe(III)(L)(CN)(4)}(2)Ni(II)(H(2)O)(2)].4H(2)O with L = bpy (2) and phen (3) [bpy = 2,2'-bipyridine and phen = 1,10-phenanthroline] have been prepared and their structures determined by X-ray diffraction methods. The structure of 1 consists of mononuclear [Fe(bpy)(CN)(4)](-) anions, tetraphenylarsonium cations and acetonitrile molecules of crystallization. The iron(III) is hexacoordinated with two nitrogen atoms of the bidentate bpy and four carbon atoms of four terminal cyanide groups building a distorted octahedral surrounding around the metal atom. 2 and 3 are isomorphous compounds whose structure is made up of neutral 4,2-ribbon like bimetallic chains of formula [{Fe(III)(L)(CN)(4)}(2)Ni(II)(H(2)O)(2)] where the [Fe(III)(L)(CN)(4)](-) unit acts as a bis-monodentate bridging ligand toward the trans-diaquanickel(II) units through two of its four cyanide groups in cis positions. The chains exhibit two orientations in the unit cell and they interact with each other through hydrogen bonds involving the coordination and crystallization water molecules together with the uncoordinated cyanide nitrogen atoms of the [Fe(L)(CN)(4)](-) units. Compounds 2 and 3 behave as ferromagnetic Fe(III)(2)Ni(II) chains which interact ferromagnetically at very low temperatures in the case of 2, whereas metamagnetic-like behaviour is observed for with a critical field (H(c)) around 200 G. For H > H(c) the ferromagnetic Fe(III)(2)Ni(II) chains of 3 exhibit a frequency dependence of the out-of-phase ac susceptibility signal at T < 3.5 K.     

Charge-transfer phase transition and zero thermal expansion in caesium manganese hexacyanoferrates

A series of caesium manganese hexacyanoferrates is prepared; Cs(I)(1.78)Mn(II)[Fe(II)(CN)6]0.78[Fe(III)(CN)6](0.22) (1), Cs(I)(1.57)Mn(II)[Fe(II)(CN)6]0.57[Fe(III)(CN)6](0.43) (2), Cs(I)(1.51)Mn(II)[Fe(II)(CN)6]0.51[Fe(III)(CN)6](0.49) (3), and Cs(I)(0.94)Mn(II)[Fe(II)(CN)6]0.21[Fe(III)(CN)6](0.70).0.8H2O (4). 1-3 show charge-transfer phase transitions between the high-temperature (HT) and low-temperature (LT) phases with transition temperatures (T(1/2 downward arrow), T(1/2 upward arrow)) of (207 K, 225 K) (1), (190 K, 231 K) (2), and (175 K, 233 K) (3) at a cooling and warming rates of 0.5 K min(-1). Variable temperature IR spectra indicate that the valence states of the LT phases of 1-3 are Cs(I)(1.78)Mn(II)(0.78)Mn(III)(0.22)[Fe(II)(CN)6], Cs(I)(1.57)Mn(II)(0.57)Mn(III)(0.43)[Fe(II)(CN)6], and Cs(I)(1.51)Mn(II)(0.51)Mn(III)(0.49) [Fe(II)(CN)6], respectively. The XRD measurements for 1-3 show that crystal structures of the HT and LT phases are cubic structures (Fm3[combining macron]m), but the lattice constants decrease from the HT phase to the LT phase; a = 10.5446(17) --> 10.4280(7) A (1), 10.5589(17) --> 10.3421(24) A (2), and 10.5627(11) --> 10.3268(23) A (3). The magnetization vs. temperature curves and the magnetization vs. external magnetic field curves show that the LT phases are ferromagnetic with Curie temperatures of 4.3 (1), 5.0 (2), and 5.6 K (3). At a cooling rate of -0.5 K min(-1), 4 does not show the charge-transfer phase transition, but does show a behavior of zero thermal expansion with a thermal expansivity of +0.2 x 10(-6) K(-1) throughout the temperature range 300 and 20 K.     

Cyanide-bridge Fe-Fe and Fe-Co molecular squares: structures and electrochemistry of

Cyanide-bridged iron-iron and iron--cobalt molecular squares of [Fe(II/4)(mu-CN)4(bpy)8[(PF6)4 x 4H2O (1), [Fe(II/2)Co(II/2)(mu-CN)4(bpy)8](PF6)4 x 3CHCl3 x 2CH3CN (2), and [Fe(II/2)Co(III/2)(mu-CN)4(bpy)8](PF6)6 x 2CHCl3 x 4CH3NO2 (3) (bpy =2,2'-bipyridine) were prepared. X-ray structure analyses for 1-3 were performed and their electrochemistry was studied. In 1-3, four metal ions are bridged by cyanide groups to form tetranuclear macrocycles ("molecular squares"). Each metal ion in the square is six-coordinate: four of the coordination sites are occupied by the nitrogen atoms of two of bpy ligands and the remaining cis coordination sites are occupied by cyanide-carbon or cyanide-nitrogen atoms. In 1, Fe-C (cyanide) (1.899(4)-1.927(4)A) and Fe-N(cyanide) (1.929(4)-1.950(4)A) distances are typical of low-spin Fe2+ ions. In 2, Fe-C(cyanide) and Co(2+)-N(cyanide) bond lengths are in the range 1.919(5)-1.963(5)A and 1.850(5)-2.017(5) A, respectively: in contrast, shorter bond lengths are observed for the metal to cyanide-carbon and cyanide-nitrogen (1.878(7)- 1.893(7) A) in 3. As a result, the molecular squares in 1. 2, and 3 have sides of 4.947(1)4.986(1) A, 5.001(1)-5.053(1) A, and 4.910(1)-4.918(1) A, respectively. Magnetic susceptibility measurements revealed that the Fe2+ and Co3- ions in 1 and 3 are diamagnetic, while the high-spin Co2+ ions in 2 are weakly coupled through the low-spin Fe2 ions. Cyclic voltammograms of the squares are presented, and the electrochemically generated mixed-valent species [Fe(II/2)Fe(III/2)(mu-CN)4(bpy)8]6+ was discussed in terms of the intervalence transfer band.     

Kinetics and mechanism of the interaction of nitric oxide with pentacyanoferrate(II). Formation and dissociation of [Fe(CN)5NO]3 -

The interaction of NO with [Fe(CN)(5)H(2)O](3)(-) (generated by aquation of the corresponding ammine complex) to produce [Fe(CN)(5)NO](3)(-) was studied by UV-vis spectrophotometry. The reaction product is the well characterized nitrosyl complex, described as a low-spin Fe(II) bound to the NO radical. The experiments were performed in the pH range 4-10, at different concentrations of NO, temperatures and pressures. The rate law was first-order in each of the reactants, with the specific complex-formation rate constant, k(f)( )()= 250 +/- 10 M(-)(1) s(-)(1) (25.4 degrees C, I = 0.1 M, pH 7.0), DeltaH(f)() = 70 +/- 1 kJ mol(-)(1), DeltaS(f)() = +34 +/- 4 J K(-)(1) mol(-)(1), and DeltaV(f)() = +17.4 +/- 0.3 cm(3) mol(-)(1). These values support a dissociative mechanism, with rate-controlling dissociation of coordinated water, and subsequent fast coordination of NO. The complex-formation process depends on pH, indicating that the initial product [Fe(CN)(5)NO](3)(-) is unstable, with a faster decomposition rate at lower pH. The decomposition process is associated with release of cyanide, further reaction of NO with [Fe(CN)(4)NO](2)(-), and formation of nitroprusside and other unknown products. The decomposition can be prevented by addition of free cyanide to the solutions, enabling a study of the dissociation process of NO from [Fe(CN)(5)NO](3)(-). Cyanide also acts as a scavenger for the [Fe(CN)(5)](3)(-) intermediate, giving [Fe(CN)(6)](4)(-) as a final product. From the first-order behavior, the dissociation rate constant was obtained as k(d) = (1.58 +/- 0.06) x 10(-)(5) s(-)(1) at 25.0 degrees C, I = 0.1 M, and pH 10.2. Activation parameters were found to be DeltaH(d)() = 106.4 +/- 0.8 kJ mol(-)(1), DeltaS(d)() = +20 +/- 2 J K(-)(1) mol(-)(1), and DeltaV(d)() = +7.1 +/- 0.2 cm(3) mol(-)(1), which are all in line with a dissociative mechanism. The low value of k(d) as compared to values for the release of other ligands L from [Fe(II)(CN)(5)L](n)()(-) suggests a moderate to strong sigma-pi interaction of NO with the iron(II) center. It is concluded that the release of NO from nitroprusside in biological media does not originate from [Fe(CN)(5)NO](3)(-) produced on reduction of nitroprusside but probably proceeds through the release of cyanide and further reactions of the [Fe(CN)(4)NO](2)(-) ion.     

Hybrid materials containing organometallic cations and 3-D anionic metal dicyanamide networks of type [Cp*2M][M'(dca)3

A new series of hybrid materials of type [Cp*2M][M'(dca)3] has been prepared by cation templation and structurally characterised (M = Fe(III), Co(III); M'= Mn(II), Fe(II), Co(II), Ni(II), Cd(II); dca-= N(CN)2-). The crystallographic analysis of [Cp*2Fe][Cd(dca)(3)] showed that the [Cd(dca)3]- anionic framework is of a symmetrical 3-D alpha-polonium type, containing octahedral Cd nodes and micro (1,5)-dca bridging ligands. The [Cp*2Fe]+ cations occupy the cube-like cavities within the framework. The cationic and anionic-framework sublattices remain magnetically independent and display susceptibilities, over the range 300 to 2 K, of a Curie-Weiss nature obtained by adding a S= 1/2 (Cp*2Fe+) or a S= 0 (Cp*2Co+) contribution to those of the weakly antiferromagnetically coupled frameworks of M'. These hybrid species do not show any intrinsic long-range magnetic order. The present [Cp*2Fe]M'(dca)3] series display the characteristic, unusually shaped [Cp*2Fe]+ Mossbauer line, in the range 295-5 K, assigned (below 101 K) as the sum of a narrow and a broad line. Relaxation effects were evident. The [Fe(dca)3]- compound showed superimposed low-spin Fe(III) and high-spin Fe(II) lines, the latter giving relaxation broadening effects.     

Synthesis, characterization, and reactivity of [Ru(bpy)(CH3CN)3(NO2)]PF6, a synthon for [Ru(bpy)(L3)NO2] complexes

We report a high yield, two-step synthesis of fac-[Ru(bpy)(CH3CN)3NO2]PF6 from the known complex [(p-cym)Ru(bpy)Cl]PF6 (p-cym = eta(6)-p-cymene). [(p-cym)Ru(bpy)NO2]PF6 is prepared by reacting [(p-cymene)Ru(bpy)Cl]PF6 with AgNO3/KNO2 or AgNO2. The 15NO2 analogue is prepared using K15NO2. Displacement of p-cymene from [(p-cym)Ru(bpy)NO2]PF6 by acetonitrile gives [Ru(bpy)(CH3CN)3NO2]PF6. The new complexes [(p-cym)Ru(bpy)NO2]PF6 and fac-[Ru(bpy)(CH3CN)3NO2]PF6 have been fully characterized by 1H and 15N NMR, IR, elemental analysis, and single-crystal structure determination. Reaction of [Ru(bpy)(CH3CN)3NO2]PF6 with the appropriate ligands gives the new complexes [Ru(bpy)(Tp)NO2] (Tp = HB(pz)3-, pz = 1-pyrazolyl), [Ru(bpy)(Tpm)NO2]PF6 (Tpm = HC(pz)3), and the previously prepared [Ru(bpy)(trpy)NO2]PF6 (trpy = 2,2',6',2' '-terpyridine). Reaction of the nitro complexes with HPF6 gives the new nitrosyl complexes [Ru(bpy)TpNO][PF6]2 and [Ru(bpy)(Tpm)NO][PF6]3. All complexes were prepared with 15N-labeled nitro or nitrosyl groups. The nitro and nitrosyl complexes were characterized by 1H and 15N NMR and IR spectroscopy, elemental analysis, cyclic voltammetry, and single-crystal structure determination for [Ru(bpy)TpNO][PF6]2. For the nitro complexes, a linear correlation is observed between the nitro 15N NMR chemical shift and 1/nu(asym), where nu(asym) is the asymmetric stretching frequency of the nitro group.     

Mechanism of oxidation of benzaldehyde by polypyridyl oxo complexes of Ru(IV)

The oxidation of benzaldehyde and several of its derivatives to their carboxylic acids by cis-[Ru(IV)(bpy)2(py)(O)]2+ (Ru(IV)=O2+; bpy is 2,2'-bipyridine, py is pyridine), cis-[Ru(III)(bpy)2(py)(OH)]2+ (Ru(III)-OH2+), and [Ru(IV)(tpy)(bpy)(O)]2+ (tpy is 2,2':6',2'-terpyridine) in acetonitrile and water has been investigated using a variety of techniques. Several lines of evidence support a one-electron hydrogen-atom transfer (HAT) mechanism for the redox step in the oxidation of benzaldehyde. They include (i) moderate k(C-H)/k(C-D) kinetic isotope effects of 8.1 +/- 0.3 in CH3CN, 9.4 +/- 0.4 in H2O, and 7.2 +/- 0.8 in D2O; (ii) a low k(H2O/D2O) kinetic isotope effect of 1.2 +/- 0.1; (iii) a decrease in rate constant by a factor of only approximately 5 in CH3CN and approximately 8 in H2O for the oxidation of benzaldehyde by cis-[Ru(III)(bpy)2(py)(OH)]2+ compared to cis-[Ru(IV)(bpy)2(py)(O)]2+; (iv) the appearance of cis-[Ru(III)(bpy)2(py)(OH)]2+ rather than cis-[Ru(II)(bpy)2(py)(OH2)]2+ as the initial product; and (v) the small rho value of -0.65 +/- 0.03 in a Hammett plot of log k vs sigma in the oxidation of a series of aldehydes. A mechanism is proposed for the process occurring in the absence of O2 involving (i) preassociation of the reactants, (ii) H-atom transfer to Ru(IV)=O2+ to give Ru(III)-OH2+ and PhCO, (iii) capture of PhCO by Ru(III)-OH2+ to give Ru(II)-OC(O)Ph+ and H+, and (iv) solvolysis to give cis-[Ru(II)(bpy)2(py)(NCCH3)]2+ or the aqua complex and the carboxylic acid as products.     

Synthesis, crystal structures, and magnetic properties of a new family of heterometallic cyanide-bridged Fe(III)2M(II)2 (M=Mn, Ni, and Co) square complexes

New heterobimetallic tetranuclear complexes of formula [Fe(III){B(pz)(4)}(CN)(2)(μ-CN)Mn(II)(bpy)(2)](2)(ClO(4))(2)·CH(3)CN (1), [Fe(III){HB(pz)(3)}(CN)(2)(μ-CN)Ni(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (2a), [Fe(III){B(pz)(4)}(CN)(2)(μ-CN)Ni(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (2b), [Fe(III){HB(pz)(3)}(CN)(2)(μ-CN)Co(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (3a), and [Fe(III){B(pz)(4)}(CN)(2)(μ-CN)Co(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (3b), [HB(pz)(3)(-) = hydrotris(1-pyrazolyl)borate, B(Pz)(4)(-) = tetrakis(1-pyrazolyl)borate, dmphen = 2,9-dimethyl-1,10-phenanthroline, bpy = 2,2'-bipyridine] have been synthesized and structurally and magnetically characterized. Complexes 1-3b have been prepared by following a rational route based on the self-assembly of the tricyanometalate precursor fac-[Fe(III)(L)(CN)(3)](-) (L = tridentate anionic ligand) and cationic preformed complexes [M(II)(L')(2)(H(2)O)(2)](2+) (L' = bidentate α-diimine type ligand), this last species having four blocked coordination sites and two labile ones located in cis positions. The structures of 1-3b consist of cationic tetranuclear Fe(III)(2)M(II)(2) square complexes [M = Mn (1), Ni (2a and 2b), Co (3a and 3b)] where corners are defined by the metal ions and the edges by the Fe-CN-M units. The charge is balanced by free perchlorate anions. The [Fe(L)(CN)(3)](-) complex in 1-3b acts as a ligand through two cyanide groups toward two divalent metal complexes. The magnetic properties of 1-3b have been investigated in the temperature range 2-300 K. A moderately strong antiferromagnetic interaction between the low-spin Fe(III) (S = 1/2) and high-spin Mn(II) (S = 5/2) ions has been found for 1 leading to an S = 4 ground state (J(1) = -6.2 and J(2) = -2.7 cm(-1)), whereas a moderately strong ferromagnetic interaction between the low-spin Fe(III) (S = 1/2) and high-spin Ni(II) (S = 1) and Co(II) (S = 3/2) ions has been found for complexes 2a-3b with S = 3 (2a and 2b) and S = 4 (3a and 3b) ground spin states [J(1) = +21.4 cm(-1) and J(2) = +19.4 cm(-1) (2a); J(1) = +17.0 cm(-1) and J(2) = +12.5 cm(-1) (2b); J(1) = +5.4 cm(-1) and J(2) = +11.1 cm(-1) (3a); J(1) = +8.1 cm(-1) and J(2) = +11.0 cm(-1) (3b)] [the exchange Hamiltonian being of the type H? = -J(S?(i)·S?(j))]. Density functional theory (DFT) calculations have been used to substantiate the nature and magnitude of the exchange magnetic coupling observed in 1-3b and also to analyze the dependence of the exchange magnetic coupling on the structural parameters of the Fe-C-N-M skeleton.     

2[Mn(acacen)]+ + 1[Fe(CN)5NO]- polynuclear heterobimetallic coordination compounds of different dimensionality in the solid state

Depending on the synthetic conditions, five heterometallic Mn(III)Fe(II) polynuclear compounds with the same ratio of constituents, 2[Mn(acacen)](+)/[Fe(CN)(5)NO](2-), of different nuclearity and dimensionality (0D, 1D, 2D) were isolated. A [Mn(acacen)MeOH](2)[Fe(CN)(5)NO]·1.5MeOH, 1 complex has been prepared by reaction of Mn(III)/Schiff base (SB) complex, [Mn(acacen)Cl] (H(2)acacen is N,N'-ethylenebis(acetylacetoneimine)) with sodium nitroprusside (NP). Single crystal X-ray diffraction analyses reveal that crystallization of 1 from coordinating or non-coordinating solvents results in different coordination polynuclear materials: from C(2)H(5)OH [{Mn(acacen)H(2)O}(2)Fe(CN)(5)NO]·C(2)H(5)OH, 2, a trinuclear complex is formed; from CH(3)CN [{Mn(acacen)H(2)O}(4)Fe(CN)(5)NO][Fe(CN)(5)NO]·4CH(3)CN, an ionic compound with a pentanuclear bimetallic cation is formed 3; from i-C(3)H(7)OH [{Mn(acacen)}(2)(i-PrOH)Fe(CN)(5)NO](n), a coordination chain polymer 4 is formed; from toluene [{Mn(acacen)}(2)Fe(CN)(5)NO](n), a layered network 5 is formed. As the magnetic measurements show, for all compounds the weak interaction between Mn(III)S = 2 spins through the NP bridge is antiferromagnetic and exhibits no significant photoactivity.     

A starburst-shaped heterometallic compound incorporating six densely packed gd(3+) ions

The heterotritopic ligand [bpy(DTTA)2]8- has two diethylenediamine-tetraacetate units for selective lanthanide(III) coordination and one bipyridine function for selective Fe(II) coordination. In aqueous solution and in the presence of these metals, the ligand is capable of self-assembly to form a rigid supramolecular metallostar structure, [Fe[Gd2bpy(DTTA)2(H2O)4]3]4-. We report here the physicochemical characterization of the dinuclear complex [Gd2bpy(DTTA)2(H2O)4]2- and the metallostar [Fe[Gd2bpy(DTTA)2(H2O)4]3]4- with regard to potential MRI contrast agent applications. A combination of pH potentiometry and 1H NMR spectroscopy has been used to determine protonation constants for the ligand [bpy(DTTA)2]8- and for the complexes [Fe[bpy(DTTA)2]3]22- and [Y2bpy(DTTA)2]2-. In addition, stability constants have been measured for the dinuclear chelates [M2bpy(DTTA)2]n- formed with M = Gd3+ and Zn2+ (log K(GdL) = 18.2; log K(ZnL) = 18.0; log K(ZnHL) = 3.4). A multiple field, variable-temperature 17O NMR and proton relaxivity study on [Gd2bpy(DTTA)2(H2O)4]2- and [Fe[Gd2bpy(DTTA)2(H2O)4]3](4-) yielded the parameters for water exchange and the rotational dynamics. The 17O chemical shifts are indicative of bishydration of the lanthanide ion. The exchange rates of the two inner-sphere water molecules are very similar in the dinuclear [Gd2bpy(DTTA)2(H2O)(4)]2- and in the metallostar (k(ex)298 = 8.1 +/- 0.3 x 10(6) and 7.4 +/- 0.2 x 10(6) s(-1), respectively), and are comparable to k(ex)298 for similar Gd(III) poly(amino carboxylates). The rotational dynamics of the metallostar has been described by means of the Lipari-Szabo approach, which involves separating global and local motions. The difference between the local and global rotational correlation times, tau(lO)298 = 190 +/- 15 ps and tau(gO)298 = 930 +/- 50 ps, respectively, shows that the metallostar is not completely rigid. However, the relatively high value of S2 = 0.60 +/- 0.04, describing the restriction of the local motions with regard to the global one, points to a limited flexibility compared with previously reported macromolecules such as dendrimers. As a result of the two inner-sphere water molecules, with their near-optimal exchange rate, and the limited flexibility, the metallostar has a remarkable molar proton relaxivity, particularly at high magnetic fields (r1 = 33.2 and 16.4 mM(-1) s(-1) at 60 and 200 MHz, respectively, at 25 degrees C). It packs six efficiently relaxing Gd(III) ions into a small molecular space, which leads, to the best of our knowledge, to the highest relaxivity per molecular mass ever reported for a Gd(III) complex. The [bpy(DTTA)2]8- ligand is also a prime candidate as a terminal ligand for constructing larger sized, Fe(II) (or Ru(II))-based metallostars or metallodendrimers loaded with Gd(III) on the surface.     

Kinetics and mechanism of the formation of nitroprusside from aquapentacyanoferrate(III) and NO: complex formation controlled by outer-sphere electron transfer

The kinetics and mechanism of the reaction between nitric oxide and aquapentacyanoferrate(III) were studied in detail. Pentacyanonitrosylferrate (nitroprusside, NP) was produced quantitatively in a pseudo-first-order process. The complex-formation rate constant was found to be 0.252 +/- 0.004 M(-1) s(-1) at 25.5 degrees C, pH 3.0 (HClO(4)), and I = 0.1 M (NaClO(4)), for which the activation parameters are DeltaH++ = 52 +/- 1 kJ mol(-1), DeltaS++ = -82 +/- 4 J K(-1) mol(-1), and DeltaV++ = -13.9 + 0.5 cm(3) mol(-1). These data disagree with earlier studies on complex-formation reactions of aquapentacyanoferrate(III), for which a dissociative interchange (I(d)) mechanism was suggested. The aquapentacyanoferrate(II) ion was detected as a reactive intermediate in the reaction of aquapentacyanoferrate(III) with NO, by using pyrazine and thiocyanate as scavengers for this intermediate. In addition, the reactions of other [Fe(III)(CN)(5)L](n-) complexes (L = NCS(-), py, NO(2)(-), and CN(-)) with NO were studied. These experiments also pointed to the formation of Fe(II) species as intermediates. It is proposed that aquapentacyanoferrate(III) is reduced by NO to the corresponding Fe(II) complex through a rate-determining outer-sphere electron-transfer reaction controlling the overall processes. The Fe(II) complex rapidly reacts with nitrite producing [Fe(II)(CN)(5)NO(2)](4)(-), followed by the fast and irreversible conversion to NP.     

Efficient energy transfer via the cyanide bridge in dinuclear complexes containing Ru(II) polypyridine moieties

We report the synthesis, structure and properties of the cyanide-bridged dinuclear complex ions [Ru(L)(bpy)(μ-NC)M(CN)(5)](2-/-) (L = tpy, 2,2';6',2'-terpyridine, or tpm, tris(1-pyrazolyl)methane, bpy = 2,2'-bipyridine, M = Fe(II), Fe(III), Cr(III)) and the related monomers [Ru(L)(bpy)X](2+) (X = CN(-) and NCS(-)). All the monomeric compounds are weak MLCT emitters (λ = 650-715 nm, ? ≈ 10(-4)). In the Fe(II) and Cr(III) dinuclear systems, the cyanide bridge promotes efficient energy transfer between the Ru-centered MLCT state and a Fe(II)- or Cr(III)-centered d-d state, which results either in a complete quenching of luminescence or in a narrow red emission (λ ≈ 820 nm, ? ≈ 10(-3)) respectively. In the case of Fe(III) dinuclear systems, an electron transfer quenching process is also likely to occur.     

Structure of an I- x (H2O)6 anion cluster in a 3D anion crystal host [I x (H2O)6Fe(CN)6 x H2O]4-

A planar structure of an anion cluster I- x (H2O)6 in a 3D supramolecular complex [Ru(bpy)3]2[I x (H2O)6Fe(CN)6 x H2O] has been determined by single-crystal X-ray analysis. In the supramolecule, the anion cluster I- x (H2O)6, together with the anion [Fe(CN)6 x H2O]2-, acts as a 3D crystal host, and the [Ru(bpy)3]2+ cations, as the guest molecules, occupy the vacancies of the 3D host framework. This is the first crystal example of the anion cluster I- x (H2O)6.     

Proton-induced luminescence of mono- and dinuclear rhenium(I) tricarbonyl complexes containing 4-pyridinealdazine

New mono- and dinuclear rhenium(I) tricarbonyls, of formulas [Re(bpy)(CO)3(PCA)]+ (1), [(bpy)(CO)3Re(I)(PCA)Re(I)(CO)3(bpy)]2+ (2), and [(bpy)(CO)3Re(I)(PCA)Ru(II)(NH3)5]3+ (3) (bpy = 2,2'-bipyridine, PCA = 4-pyridinecarboxaldehydeazine), have been synthesized as PF6- salts and characterized by spectroscopic, electrochemical, and photophysical techniques. These species do not emit at room temperature in CH(3)CN; however, in aqueous solutions, a decrease in pH induces luminescence in all of them, due to protonation of one of the N atoms of the -C=N-N=C- chain of PCA, as indicated by the pKa values of the ground states, obtained by absorption measurements, which are ca. 3 orders of magnitude lower than the pKa value of the pyridine N of PCA in complex 1. On the other hand, the values of pKa* of the excited states, obtained by emission measurements, of complexes 1 and 2 are similar (pKa* = 2.7 +/- 0.1 at I = 0.1 M) and higher than those of the corresponding ground states. At low values of pH, chemical decomposition takes place rapidly in complex 3, but not in 1 and 2, supporting the possible use of these latter species as luminescent sensors of pH. The heterodinuclear complex, of formula [(bpy)(CO)3Re(I)(PCA)Ru(III)(NH3)5]4+, was obtained by bromine oxidation of the [Re(I), Ru(II)] precursor in CH3CN solution; from spectral and electrochemical measurements, the recombination charge-transfer reaction [Re(II), Ru(II) ] --> [Re(I), Ru(III)], which occurs after photoexcitation, is predicted to lie in the Marcus inverted region.     

Controlled intramolecular electron transfers in cyanide-bridged molecular squares by chemical modifications and external stimuli

A series of cyanide bridged Fe-Co molecular squares, [Co(2)Fe(2)(CN)(6)(tp*)(2)(dtbbpy)(4)](PF(6))(2)·2MeOH (1), [Co(2)Fe(2)(CN)(6)(tp*)(2)(bpy)(4)](PF(6))(2)·2MeOH (2), and [Co(2)Fe(2)(CN)(6)(tp)(2)(dtbbpy)(4)](PF(6))(2)·4H(2)O (3) (tp = hydrotris(pyrazol-1-yl)borate, tp* = hydrotris(3,5-dimethylpyrazol-1-yl)borate, bpy =2,2'-bipyridine, dtbbpy =4,4'-di-tert-butyl-2,2'-bipyridine), were prepared by the reactions of [Fe(CN)(3)(L)](-) (L = tp or tp*) with Co(2+) and bidentate ligands (bpy or dtbbpy) in MeOH. In the molecular squares, Fe and Co ions are alternately bridged by cyanide ions, forming macrocyclic tetranuclear cores. Variable temperature X-ray structural analyses and magnetic susceptibility measurements confirmed that 1 exhibits two-step charge-transfer induced spin transitions (CTIST) centered at T(1/2) = 275 and 310 K in the solid state. The Fe and Co ions in 1 are the low-spin (LS) Fe(III) and high-spin (HS) Co(II) ions, described here in the high-temperature (HT) phase ([Fe(III)(LS2)Co(II)(HS2)]) at 330 K, while a low-temperature (LT) phase ([Fe(II)(LS2)Co(III)(LS2)]) with LS Fe(II) and Co(III) ions was dominant below 260 K. X-ray structural analysis revealed that in the intermediate (IM) phase at 298 K 1 exhibits positional ordering of [Fe(III)(LS2)Co(II)(HS2)] and [Fe(II)(LS2)Co(III)(LS2)] species with the 2:2 ratio. In photomagnetic experiments on 1, light-induced CTIST from the LT to the HT phase was observed by excitation of Fe(II) → Co(III) intervalence charge transfer (IVCT) band at 5 K and the trapped HT phase thermally relaxed to the LT phase in a two-step fashion. On the other hand, 2 and 3 are in the HT and LT phases, respectively, throughout the entire temperature range measured, and no CTIST was observed. UV-vis-NIR absorption spectral measurements and cyclic voltammetry in solution revealed that the different electronic states in 1-3 are ascribable to the destabilization of iron and cobalt ion d-orbitals by the introduction of methyl and tert-butyl groups to the ligands tp and bpy, respectively. Temperature dependence of UV-vis-NIR spectra confirmed that 1 exhibited a one-step CTIST in butyronitrile, of which T(1/2) varied from 227 to 280 K upon the addition of trifluoroacetic acid.     

Incorporation of substitutionally labile [V(III)(CN)6]3- into prussian blue type magnetic materials

A Prussian blue (PB) type material containing hexacyanovanadate(III), Mn(II)1.5[V(III)(CN)6].(0.30)MeCN (1), was formed from the reaction of [V(III)(CN)6](3-) with [Mn(NCMe)6](2+) in MeCN. This new material exhibits ferrimagnetic spin- or cluster-glass behavior below a Tc of 12K with observed magnetic hysteresis at 2 K (Hcr = 65 Oe and Mrem = 730 emu.Oe/mol). Reactions of [V(III)(CN)6](3-) with [M(II)(NCMe)6](2+) (M = Fe, Co, Ni) in MeCN lead to either partial (M = Co) or complete (M = Fe, Ni) linkage isomerization, resulting in compounds of Fe(II)(0.5)V(III)[Fe(II)(CN)6].(0.85)MeCN (2), (NEt4)(0.10)Co(II)(1.5- a)V(II)a[Co(III)(CN)6]a [V(III)(CN)6](1-a)(BF4)(0.10).(0.35)MeCN (3), and (NEt4)(0.20)V(III)[Ni(II)(CN)4](1.6).(0.10)MeCN (4) compositions. Compounds 2-4 do not magnetically order as a consequence of diamagnetic cyanometalate anions being present, i.e., [Fe(II)(CN)6](4-), [Co(III)(CN)6](3-), and [Ni(II)(CN)4](2-). Incorporation of [V(III)(CN)6](3-) into PB-type materials is synthetically challenging because of the lability of the cyanovanadate(III) anion.