Synthesis and characterization of a new fluorinated polyether glycol prepared by radical grafting of hexafluoropropylene onto polytetramethylene glycol

A new fluorinated polyether glycol (PTMG-g-HFP) was prepared by radical grafting of hexafluoropropylene (HFP) onto polytetramethylene glycol (PTMG) in the presence of different initiators. The structure of PTMG-g-HFP was characterized by means of IR, ¹H NMR and ¹³C NMR. The effects of nature and amount of initiator, reaction time and reaction temperature on grafting HFP onto PTMG were investigated. The results showed di-tert-butyl peroxide (DTBP) was the most efficient in the reaction and the optimal reaction conditions were: [DTBP]₀/[PTMG]₀, 0.12; reaction temperature, 140 °C; reaction time, 6 h.     

Cyanoesterification of norbornenes catalyzed by palladium: facile synthetic methodology to introduce cyano and ester functionalities via direct carbon-carbon bond cleavage of cyanoformates

Addition of cyanoformates (NC-COOR) to norbornene at 110 °C in the presence of Pd(PPh₃)₄ (10 mol %) as a catalyst affords with high selectivity the corresponding doubly functionalized polar norbornane derivatives bearing both cyano and ester groups. By using benzonorbornadiene and norbornadienes as the substrates, the reaction can be extended to synthesis of various functionalized norbornene derivatives in moderate to excellent yields. In most cases alkyl groups such as methyl, ethyl, n-propyl, iso-propyl, n-butyl, tert-butyl, and benzyl in the ester functionalities are applicable to the reactions. Oxidative addition of cyanoformates to Pd(0), insertion of norbornenes, and reductive elimination of the corresponding adducts constitute the proposed catalysis pathway.     

Determination of some endocrine disrupter chemicals in urban wastewater samples using liquid chromatography-mass spectrometry

An analytical method for the simultaneous determination of trace amounts of fourteen endocrine disrupter chemicals (EDCs) in urban wastewater samples has been developed. The studied compounds were: bisphenol A and its chlorinated derivatives (monochloro, dichloro, trichloro and tretrachlorobisphenol A), three alkylphenols (4-n-nonyl, 4-n-octyl and 4-(tert-octyl)phenol) and six well known phthalate esters (dimethyl, diethyl, di-n-butyl, butylbenzyl, bis(2-ethylhexyl) and di-n-octylphthalate). The method involves extraction from the samples and preconcentration of the analytes using a solid-phase extraction (SPE) procedure and subsequent liquid chromatographic separation with mass spectrometric detection (LC−MS). Bisphenol F was used as a surrogate. Quantification limits found ranged between 12 ng L^− 1 for diethylphthalate and 69 ng L^− 1 for 4-(tert-octyl)phenol. The method was satisfactorily used for determination of these chemicals in urban wastewater samples of Granada City (Spain) and validated using a recovery assay with spiked samples.     

A new efficient synthesis of isothiocyanates from amines using di-tert-butyl dicarbonate

Alkyl and aryl amines are converted smoothly to the corresponding isothiocyanates via the dithiocarbamates in good to excellent yields using di-tert-butyl dicarbonate (Boc₂O) and 1-3 mol % of DMAP or DABCO as catalyst. As most of the byproducts are volatile, the work-up involves simple evaporation of the reaction mixture.     

Stable free radical polymerization of n-butyl acrylate in the presence of high-temperature initiators

Living radical polymerizations of acrylate are known to be difficult to achieve using TEMPO as a mediator. The stable free radical polymerization (SFRP) of acrylate tends to stop at low monomer conversion due to the accumulation of TEMPO in the medium as a result of unavoidable bimolecular termination. Rather than solving this problem by destroying the excess nitroxide using ascorbic acid or glyceraldehyde associated with pyridine as reported recently, high temperature initiators were used to slowly and continuously generate new radicals throughout the polymerization to consume the excess TEMPO molecules. Polymerizations of n-butyl acrylate initiated by the alkoxyamine unimer (1-benzoyloxy)-2-phenyl-2-(2′,2′,6′,6′-tetramethyl-1′-piperidinyloxy)ethane (BST) were performed between 130 °C and 134 °C in the presence of a series of high temperature peroxide and azo initiators. The best results in this study were obtained by the continuous addition of small amounts of di-tert-amyl peroxide throughout the polymerization. Under these conditions, the acrylate polymerizations fulfilled the criteria of a controlled polymerization process although the molecular weight distributions were slightly broad (M_w/M_n ∼ 1.5).     

Synthesis of tertiary-butyl acrylate polymers and preparation of diblock copolymers using atom transfer radical polymerization

The synthesis of tert-butyl acrylate by atom transfer radical polymerization (ATRP) is reported. This polymer was prepared using FeCl₂ · 4H₂O(PPh₃)₂ catalyst system in conjunction with methyl 2-bromopropionate as initiator, in bulk and in solution using acetone as a solvent. The addition of solvent was necessary in order to decrease the polymerization rate and to afford low polydispersity polymers. The number-average molecular weights of the resulting polymers increased in direct proportion to the monomer conversion, and the polydispersities (M_w/M_n) were as low as 1.2. In addition, the preparation of an AB diblock copolymer of poly (n-butyl methacrylate)-block-poly (tert-butyl acrylate) by ATRP is reported. The resulting polymers and copolymers were characterized by means of size exclusion chromatography and ¹H-NMR Spectroscopy.     

N-tert-Butoxycarbonylation of amines using H3PW12O40 as an efficient heterogeneous and recyclable catalyst

The commercially available heteropoly acid H₃PW₁₂O₄₀ (0.5 mol %) is a very efficient and environmentally benign catalyst for N-tert-butoxycarbonylation of amines (primary, secondary) with di-tert-butyl dicarbonate at room temperature in short reaction times (<10 min). No competitive side products such as isocyanates, ureas, N,N-di-tert-butoxycarbonyls, O-Boc and oxazolidinones were observed. Chiral α-amino alcohols and esters afforded the corresponding N-Boc derivatives chemoselectively in excellent yields.     

Hindered, 1,1-disubstituted monomers. Chain transfer to benzene in the radical polymerisation of di-n-butyl itaconate

The transfer constant to benzene in the radical polymerisation of di-n-butyl itaconate, DBI, was measured at 60 °C and found to have the value of 2.2 × 10⁻³. This value is surprisingly high considering that benzene has no readily extractable hydrogen atoms and is usually considered to be a relatively inert solvent in radical polymerisations. The high values of transfer constants in the radical polymerisation of itaconates must be taken into consideration when planning the tailored polymerisation of these monomers.     

An exception to the normal Mitsunobu reaction with phenols; the formation of hydrazones from salicylaldehydes

The reaction of 2-hydroxybenzaldehydes with alkanols in the presence of triphenylphosphine and di-tert-butyl azodicarboxylate (DBAD), under the Mitsunobu reaction conditions, gives rise to the formation of hydrazones as the major products rather than the expected alkyl aryl ethers.     

N-Alkylation of carbamates and amides with alcohols catalyzed by a CpIr complex

New atom-economical catalytic systems consisting of [Cp^∗IrCl₂]₂/NaOAc (Cp^∗=pentamethylcyclopentadienyl) for the N-alkylation of carbamates and amides using alcohols as alkylating agents under solvent-free conditions have been developed. For example, the reaction of n-butyl carbamate with benzyl alcohol in the presence of [Cp^∗IrCl₂]₂ (5.0 mol % Ir) and NaOAc (5.0 mol %) at 130 °C under the absence of solvent gives n-butyl N-benzylcarbamate in the yield of 94%. The present catalytic system is applicable to not only carbamates but also amides, and only harmless water is produced as co-product.     

Di-tert-butyl dicarbonate: a versatile carboxylating reagent

Carbon nucleophiles generated by a non-nucleophilic base (LDA) were effectively trapped with di-tert-butyl dicarbonate (Boc-anhydride) to provide the corresponding tert-butyl aryl acetates, di-tert-butyl aryl malonates, unsymmetrical aryl malonates and tert-butyl benzoates in high yields. This reaction represents another useful way to prepare a variety of tert-butyl carboxylates and highlights the synthetic utility of di-tert-butyl dicarbonate as a versatile carboxylating reagent.     

Liquid–liquid equilibria for binary systems of tert-amyl ethyl ether (TAEE), isopropyl tert-butyl ether (IPTBE) and di-sec-butyl ether (DSBE) with water and for ternary systems with methanol or ethanol

The liquid–liquid equilibria for binary systems of tert-amyl ethyl ether (TAEE) + water, isopropyl tert-butyl ether (IPTBE) + water and di-sec-butyl ether (DSBE) + water are analytically determined in the temperature range 278.65–358 K. Additionally, tie-lines for six ternary systems of TAEE, IPTBE and DSBE with methanol and water or with ethanol and water are also measured at 298.15 K. All the measured binary and ternary data were correlated with the NRTL and UNIQUAC model. The reliability of the experimental tie-line data for ternary systems was ascertained by using the Othmer–Tobias correlation.     

X-ray crystal structure of the tetra(tert-butyl)erbate anion and attempts to prepare tetravalent organolanthanide complexes

The new [Li(DME)₃⁺] salt of the previously-known tetra(tert-butyl)erbate(III) anion [Er(t-Bu)₄⁻] has been prepared and structurally characterized. The erbium(III) center is ligated by four tert-butyl groups in an approximately tetrahedral arrangement. The C–Er–C angles between the tert-butyl groups range from 108.8(3)° to 111.2(3)° and the Er–C distances range from 2.352(6) to 2.395(6) Å. The lithium cation is surrounded by three DME molecules, which form a distorted octahedral coordination sphere. Attempts to oxidize the analogous terbate complex [Li(DME)₃][Tb(t-Bu)₄] and its cerium analog to electrically neutral tetra(alkyl)lanthanide(IV) compounds are described.     

Synthesis of urethane—acrylic multi-block copolymers via electrochemically mediated ATRP

The electrochemically mediated atom transfer radical polymerisation (eATRP) of n-butyl acrylate was investigated under a variety of catalyst concentrations. Poly(n-butyl acrylate)-block-polyurethane-block-poly(n-butyl acrylate) copolymers were prepared via electrochemically mediated atom transfer radical polymerisation (eATRP) using only 7 × 10^?6 mole % of Cu^II complex. The successful chain extension and formation of penta-block copolymers confirmed the living nature of the poly(alkyl acrylates) prepared by eATRP. In this work, the tri-block and penta-block urethane-acrylate copolymers were synthesised for the first time by using tertiary bromine-terminated polyurethane macro-initiators as transitional products reacting with n-butyl acrylate, and subsequently with tert-butyl acrylate in the presence of the Cu^IIBr₂/TPMA catalyst complex. The results of ¹H NMR spectral studies support the formation of tri-block poly(n-butyl acrylate)-block-polyurethane-block-poly(n-butyl acrylate) copolymers, and penta-block poly(tert-butyl acrylate)-block-poly(n-butyl acrylate)-block-polyurethane-block-poly(n-butyl acrylate)-block-poly(tert-butyl acrylate) copolymers.     

Convenient removal of N-tert-butyl from amides with scandium triflate

Scandium triflate has been used as a convenient and efficient catalyst for removal of N-tert-butyl from amide groups. A variety of N-tert-butyl aryl and alkyl amides under these conditions gave the corresponding primary amide in high yields. With the use of microwave heating the deprotection reaction could be completed within 1 h.     

Synthesis of a ferrocenyl uracil PNA monomer for insertion into PNA sequences

The deprotection of the tert-butyl group of a ferrocenyl uracil Peptide Nucleic Acid (PNA) monomer, Fmoc-aeg(R)-O^tBu (1) was achieved using a two step synthesis involving hydrolysis in basic conditions to give first the zwitterion of ⁺NH₃-aeg(R)-O⁻ (7). Compound 7 was reacted in situ with N-(9-fluorenylmethoxycarbonyloxy)succinimide to obtain the expected compound Fmoc-aeg(R)-OH (2) (Abbreviations: Aeg = (2-aminoethyl)-glycine; Fmoc = 9-fluorenylmethoxycarbonyl; O^tBu = tert-butyl; R = 5-(N-ferroce-nylmethylbenzamido)uracyl).     

Redox-active antifungal cobalt(II) and copper(II) complexes with sterically hindered o-aminophenol derivatives

Co(II) complexes with 4,6-di(tert-butyl)-2-aminophenol (HL^I) and 2-anilino-4,6-di(tert-butyl)phenol (HL^II) have been synthesized and characterized by means of physico-chemical methods. The compounds HL^I and HL^II coordinate in their singly deprotonated forms and behave as bidentate O,N-coordinated ligands; their low-spin Co(II) complexes are characterized by CoN₂O₂ coordination modes and square planar geometry. Both the free ligands and their Co(II) and Cu(II) complexes (we have produced and characterized the latter before) exhibit a pronounced antifungal activity against Aspergillus niger, Fusarium spp., Mucor spp., Penicillium lividum, Botrytis cinerea, Alternaria alternata, Sclerotinia sclerotiorum, Monilia spp., which in a number of cases is comparable with that of Nystatin and Terbinafine or even higher. The reducing properties of the ligands and their metal(II) complexes, as well as their antifungal activities, were found to decrease in the order: Cu(L^I)₂ > Cu(L^II)₂ ? Co(L^I)₂ > Co(L^II)₂ > HL^I > HL^II.     

Synthesis of cyanoalkyl indolines through cyanoalkylarylation of N-allyl anilines with alkyl nitriles under metal-free and neutral conditions

An α-C(sp³)−H functionalization of alkyl nitriles under metal-free and neutral conditions is presented. In the presence of di-tert-butyl peroxide (DTBP), N-allyl anilines underwent exo-selective cyanoalkylation/cyclization cascade, providing a direct access to 3-cyanoalkyl indolines. Previously, a transition-metal catalyst and/or a strong base were generally required to activate nitrilic α-C−H bonds. This reaction features a broad substrate scope and low cost, and primary, secondary and tertiary indolin-3-yl nitriles could all be assembled.     

Organomagnesium Synthesis of <Emphasis Type="Italic">sec</Emphasis>-Butyl- and <Emphasis Type="Italic">tert</Emphasis>-Alkylchlorogermanes and Their Reaction with Ethynylmagnesium Bromide

The limits of application of organomagnesium synthesis to the substitution of chlorine atoms in tetrachlorogermane with bulky alkyl groups are established. The reaction of tetrachlorogermane with 2-butylmagnesium chloride leads to the substitution of one, two, or three chlorine atoms, yielding the corresponding alkylchlorogermanes (MeEtCH)_nGeCl_4-n . The reaction of GeCl₄ with tert-alkylmagnesium halides leads to the substitution of only one chlorine atom, yielding tert-alkyltrichlorogermanes RMe₂CGeCl₃ (R = Me, Et, Bu). tert-Butyltrichlorogermane reacts with ethylmagnesium bromide to give ethyl(tert-butyl)dichlorogermane. Isopropyltrichlorogermane reacts with tert-butylmagnesium chloride to give isopropyl(tert-butyl)dichlorogermane. This shows that the organomagnesium synthesis does allow linking of two bulky substituents to the germanium atom. The reaction of tert-alkyltrichlorogermanes and 2-butyltrichlorogermane in THF with ethynylmagnesium bromide, in which the hydrocarbon group is the most sterically accessible, allows substitution of all the three chlorine atoms, yielding the corresponding alkyl(triethynyl)germanes. The latter compounds react with the Grignard reagent and trimethylchlorosilane to give the corresponding alkyl(trimethylsilylethynyl)germanes.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 5, 2005, pp. 757–761.Original Russian Text Copyright © 2005 by O. Yarosh, Voronkov, Zhilitskaya, N. Yarosh, Albanov, Korotaeva.     

C,N-chelated hexaorganodistannanes, and triorganotin(IV) hydrides and cyclopentadienides

Triorganotin(IV) hydrides and cyclopentadienides as well as hexaorganodistannanes containing the moiety L^CN (2-(N,N-dimethylaminomethyl)phenyl-) as chelating ligand and phenyl, n-butyl or t-butyl substituents were prepared and characterized by NMR and XRD. The compounds reveal trigonal bipyramidal geometry around the central tin atom except for the distannanes in which the tin atom has tetrahedral configuration. The di-n-butyl distannane cannot be oxidized by oxygen or heavier chalcogens and give no tin radical when irradiated by UV light or treated with the TEMPO - free radical at room temperature. L^CN(t-Bu)₂SnH undergoes reaction in solution toward the corresponding distannane. The hydrostannation reaction of L^CN(n-Bu)₂SnH with ferrocenylacetylene was investigated. The CO₂ activation by L^CN(n-Bu)₂SnH was also examined.