Photochemical cleavage and release of para-substituted phenols from alpha-keto amides

In aqueous media alpha-keto amides 4-YC6H4OCH2COCON(R)CH(R')CH3 (5a, R = Et, R' = H; 5b, R = iPr, R' = Me) with para-substituted phenolic substituents (Y = CN, CF3, H) undergo photocleavage and release of 4-YC6H4OH with formation of 5-methyleneoxazolidin-4-ones 7a,b. For both 5a,b quantum yields range from 0.2 to 0.3. The proposed mechanism involves transfer of hydrogen from an N-alkyl group to the keto oxygen to produce zwitterionic intermediates 8a-c that eliminate the para-substituted phenolate leaving groups. The resultant imminium ions H2C=C(OH)CON+(R)=C(R')CH3 9a,b cyclize intramolecularly to give 7a,b. The quantum yields for photoelimination decrease in CH3CN, CH2Cl2, or C6H6 due to competing cyclization of 8a,b to give oxazolidin-4-one products which retain the leaving group 4-YC6H4O- (Y = H, CN). A greater tendency to undergo cyclization in nonaqueous media is observed for the N,N-diethyl amides 5a than the N,N-diisopropyl amides 5b. With para electron releasing groups Y = CH3 and OCH3 quantum yields for photoelimination significantly decrease and 1,3-photorearrangment of the phenolic group is observed. The 1,3-rearrangement involves excited state ArO-C bond homolysis to give para-substituted phenoxyl radicals, which can be observed directly in laser flash photolysis experiments.     

C6F5Xe]+ and [C6F5XeNCCH3]+ salts of the weakly coordinating borate anions, [BY4]- (Y = CN, CF3, or C6F5)

New examples of [C6F5Xe]+ salts of the weakly coordinating [BY4]- (Y = CN, CF3, or C6F5) anions were synthesized by metathesis of [C6F5Xe][BF4] with MI[BY4] (MI = K or Cs; Y = CN, CF3, or C6F5) in CH3CN at -40 degrees C, and were crystallized from CH2Cl2 or from a CH2Cl2/CH3CN solvent mixture. The low-temperature (-173 degrees C) X-ray crystal structures of the [C6F5Xe]+ cation and of the [C6F5XeNCCH3]+ adduct-cation are reported for [C6F5Xe][B(CF3)4], [C6F5XeNCCH3][B(CF3)4], [C6F5Xe][B(CN)4], and [C6F5XeNCCH3][B(C6F5)4]. The [C6F5Xe]+ cation, in each structure, interacts with either the anion or the solvent, with the weakest cation-anion interactions occurring for the [B(CF3)4]- anion. The solid-state Raman spectra of the [C6F5Xe]+ and [C6F5XeNCCH3]+ salts have been assigned with the aid of electronic structure calculations. Gas-phase thermodynamic calculations show that the donor-acceptor bond dissociation energy of [C6F5XeNCCH3]+ is approximately half that of [FXeNCCH3]+. Coordination of CH3CN to [C6F5Xe]+ is correlated with changes in the partial charges on mainly Xe, the ipso-C, and N, that is, the partial charge on Xe increases and those on the ipso-C and N decrease upon coordination, typifying a transition from a 2c-2e to a 3c-4e bond.     

Silver(I) and copper(I) complexes supported by fully fluorinated 1,3,5-triazapentadienyl ligands

Synthesis of the perfluorinated 1,3,5-triazapentadiene [N{(CF(3))C(C(6)F(5))N}(2)]H and the use of its conjugate base as a supporting ligand for the isolation of silver(i) and copper(i) complexes are reported. Some of the related chemistry involving [N{(C(3)F(7))C(C(6)F(5))N}(2)](-) (that has bulkier -C(3)F(7) groups on the 1,3,5-triazapentadienyl ligand backbone) is also presented. X-ray crystallographic data show a wide variety of structures ranging from intermolecular, hydrogen-bonded chain structure for [N{(CF(3))C(C(6)F(5))N}(2)]H with a twisted W-shaped N(3)C(2) core, monomeric [N{(CF(3))C(C(6)F(5))N}(2)]Ag(CN(t)Bu)(2) and [N{(C(3)F(7))C(C(6)F(5))N}(2)]Ag(CN(t)Bu)(2) where the κ(1)-bonded triazapentadienyl ligand bonding to the metal fragment via the central nitrogen atom, monomeric [N{(CF(3))C(C(6)F(5))N}(2)]Ag(PPh(3))(2) and [N{(C(3)F(7))C(C(6)F(5))N}(2)]Ag(PPh(3))(2) that feature κ(1)-bonded triazapentadienyl ligand bonding to the metal fragment via one of the terminal nitrogen atoms, to that of the monomeric [N{(CF(3))C(C(6)F(5))N}(2)]Cu(CN(t)Bu)(2) containing a κ(2)-bonded triazapentadienyl ligand and a U-shaped NCNCN ligand backbone. The isocyanide adducts show relatively high ν(CN) values in the IR spectra.     

Synthesis and characterization of silver(I) adducts supported solely by 1,3,5-triazapentadienyl ligands or by triazapentadienyl and other N-donors

Halogenated 1,3,5-triazapentadienyl ligands [N{(C(3)F(7))C(C(6)F(5))N}(2)](-), [N{(CF(3))C(C(6)F(5))N}(2)](-) and [N{(C(3)F(7))C(2,6-Cl(2)C(6)H(3))N}(2)](-), alone or in combination with other N-donors like CH(3)CN, CH(3)(CH(2))(2)CN, and N(C(2)H(5))(3), have been used in the stabilization of thermally stable, two-, three- or four-coordinate silver(i) adducts. X-Ray crystallographic analyses of {[N{(C(3)F(7))C(C(6)F(5))N}(2)]Ag}(n), {[N{(C(3)F(7))C(C(6)F(5))N}(2)]Ag(NCCH(3))}(n), {[N{(C(3)F(7))C(2,6-Cl(2)C(6)H(3))N}(2)]Ag(NCCH(3))}(n), {[N{(CF(3))C(C(6)F(5))N}(2)]Ag(NCCH(3))(2)}(n) and {[N{(C(3)F(7))C(C(6)F(5))N}(2)]Ag(NCC(3)H(7))}(n) revealed the presence of bridging 1,3,5-triazapentadienyl ligands bonded to silver through terminal nitrogen atoms. These adducts are polymeric in the solid state. [N{(C(3)F(7))C(2,6-Cl(2)C(6)H(3))N}(2)]AgN(C(2)H(5))(3) is monomeric and features a 1,3,5-triazapentadienyl ligand bonded to Ag(I) in a κ(1)-fashion via only one of the terminal nitrogen atoms. The solid state structure of [N{(C(3)F(7))C(C(6)F(5))N}(2)]H has also been reported and it forms polymeric chains via inter-molecular N-H···N hydrogen-bonding.     

Effect of dimerization and racemization processes on the electron density and the optical rotatory power of hydrogen peroxide derivatives

The variation of the electron density properties and optical rotatory power of the monomers and dimers of seven monosubstituted hydrogen peroxide derivatives, HOOX (X = CCH, CH(3), CF(3), t-Bu, CN, F, Cl), upon racemization has been studied using DFT (B3LYP/6-31+G) and MP2 (MP2/6-311+G) methods. The geometrical results have been rationalized on the basis of natural bond orbital (NBO) analysis. The atomic partition of the electron density properties within the atoms in molecules (AIM) methodology has allowed investigating the energy and charge redistribution in the different structures considered. The calculated optical rotatory power (ORP) of the dimers are, in general, twice of the values obtained for the monomers.     

Syntheses, solution multi-NMR characterization, and reactivities of [C6F5Xe]+ salts of weakly coordinating borate anions, [BY4]- (Y = CF3, C6F5, CN, or OTeF5)

New examples of [C6F5Xe]+ salts of the weakly coordinating anions [B(CF3)4]-, [B(C6F5)4]-, [B(CN)4]-, and [B(OTeF5)4]- have been synthesized by metathesis reactions of [C6F5Xe][BF4] with the corresponding MI[BY4] salts (MI = K or Cs; Y = CF3, C6F5, CN, or OTeF5). The salts were characterized in solution by multi-NMR spectroscopy. Their stabilities in prototypic solvents (CH3CN and CH2Cl2) and decomposition products are reported. The influence of the coordinating nature of [BY4]- on the decomposition rate of [C6F5Xe]+ as well as the presence of the weakly nucleophilic [BF4]- ion has been studied. The electrophilic pentafluorophenylation of C6H5F by [C6F5Xe][BY4] in solvents of different coordinating abilities (CH3CN and CH2Cl2) and the effects of stronger nucleophiles (fluoride and water) on the pentafluorophenylation process have been investigated. Simulations of the 19F and 129Xe NMR spectra of [C6F5Xe]+ have provided the complete set of aryl 19F-19F and 129Xe-19F coupling constants and their relative signs. The 19F NMR parameters of the [C6F5Xe]+ cation in the present series of salts are shown to reflect the relative degrees of cation-solvent interactions.     

Photoactivation of amino-substituted 1,4-benzoquinones for release of carboxylate and phenolate leaving groups using visible light

Upon exposure to visible light, 2-pyrrolidino-substituted 3,6-dimethyl-1,4-benzoquinones photocyclize to give benzoxazolines with quantum yields of 0.07-0.10 in CH2Cl2, 0.02-0.04 in CH3CN, and <0.01 in 30% aq CH3CN. With carboxylate or phenolate leaving groups incorporated via coupling to a 5-hydroxymethyl group of the quinones, the photocyclizations give benzoxazolines that eliminate the leaving groups in a dark reaction. Lifetimes for elimination of 4-YC6H4OH in 30% phosphate buffer in CD3CN (pD 7) at 17 degrees C are 13.1, 0.54, and 0.13 h for Y = H, CF3, and CN, respectively, and the linear equation log k (h(-1)) = 0.998(-pKa) + 8.80 gives a best fit to the data. Carboxylate leaving groups are rapidly eliminated upon photolysis of the quinones in aq CH3CN to produce an o-quinone methide intermediate that is trapped by 4 + 2 cycloaddition with unreacted starting material or with added 3-(dimethylamino)-5,5-dimethyl-2-cyclohexen-1-one. The ortho-quinone methide is observed at 339 and 455 nm by conventional absorption spectroscopy and gives a pseudo-first-order fit of the decay kinetics with tau1/2 = 34.9 min in 30% phosphate buffer in CH3CN at 20 degrees C.     

V@CN催化的芳烃的氧气羟基化反应

制备了V@CN催化剂,并用于氧气条件下芳烃的直接羟基化反应。结果表明,在V@CN催化剂作用下,带有不同吸电子基团(CN, NO2, COOH, CF3和COCH3)的芳烃均可被O2氧化得到相应的酚,产率中等。含有卤素(F, Cl和Br)的芳烃也可在该催化体系作用下转化为相应的酚。     

Generalized principle of designing neutral superstrong Brønsted acids

A generalized principle of designing superstrong Br?nsted acids is suggested according to the following scheme: M=O --> M=Z(X)(n). It consists of the formal replacement of =O fragment in carbonyl, sulfonyl, etc. groups in various acidic systems (e.g., CH(3)CHO, FSO(3)H, where M is the CH(3)CH= or FSO(2)H=fragment, respectively) by =NSO(2)F, =NCN, =C(CN)(2), =P(SO(2)F)(3), =S(CN)(4), or any other formally bivalent group =Z(X)(n) (where the formal valency of the central atom Z is n + 2), leading to highly acidic systems (e.g., HC(=P(CN)(3))NH(2), FS(=C(CN)(2))(2)OH, etc.). It is demonstrated that in several cases the introduction of the double-bonded substituent at the central atom (e.g., N, C, P, S, Cl) that carries the potentially acidic proton or the acidity site (e.g., OH, NH(2), CH(3), etc. groups) will lead to the enormous (up to ca. 120 kcal/mol or 88 pK(a) units!) increase of the intrinsic acidity of the respective parent acid. The acidity of the resulting acids and the scope and limitations of the principle are explored using density functional theory calculations at B3LYP 6-311+G level. Some of the resulting acids (or their anions) were found to undergo fragmentation in the course of the geometry optimization. The general trend that follows from the results of the calculations is that the stability of the resulting compounds is influenced by both the M and the Z. If M is a first row element (carbon or nitrogen), then stable species are produced with almost any Z. If M is a second row element (sulfur or phosphorus), then the species with first row Z are mostly predicted to be stable, but most of the species with second row Z are expected to undergo fragmentation during the geometry optimization. The Z = N and Z = C derivatives (e.g., =NSO(2)CF(3), =C(CN)(2), =C(SO(2)CF(3))(2), etc.) are predicted to be the most stable. However, they have relatively modest electron-accepting power as compared to their penta-, hexa-, and heptavalent counterparts. The acidifying effects of the =Z(X)(n)() groups with the same X increase with increasing n: =NCN < =C(CN)(2) < =P(CN)(3) < =S(CN)(4) and =NSO(2)F < =C(SO(2)F)(2) < =P(SO(2)F)(3). Also, the acidifying effect of a fluorosulfonyl-substituted substituent is higher than that of the corresponding cyano-substituted substituent.     

Analysis of the effects of N-substituents on some aspects of the aromaticity of imidazoles and pyrazoles

The influence of the N-substituent on the aromaticity of azoles is a subject that has not yet been addressed in detail, in contrast to the good understanding of the corresponding C-substitution. In the present work, we analyze the aromaticities of a series of 1,2- and 1,3-azoles (pyrazoles and imidazoles, respectively) with the N-substituents NH(2), OH, Cl, SH, H, NO(2), CN, SO(2)F, SO(2)CF(3), and N(SO(2)CF(3))(2), which are also compared with the aromaticities of the corresponding substituted benzene series. The larger stabilitiy of the imidazole ring is due not to a higher aromaticity, but rather to the weakness of the N-N bond in the pyrazole series. The aromaticity of azoles was found to be significantly less robust to N-substitutions than that of their C-substituted benzene counterparts.     

Methyl and phenyl substitution effects on the proton affinities of hydrides of first and second row elements and substituent effects on the proton affinities of ring carbons in benzene: a DFT study

Theoretical calculations using B3LYP density functional theory (DFT) with the 6-311++G(d,p) basis set have been performed to determine proton affinities (PAs) of a series of H-X compounds and the corresponding methyl- (H(3)C-X) and phenyl- (Ph-X) substituted derivatives with a variety of proton acceptor atoms, such as C, O, N, F, Si, P, S, Cl, etc. Our results illustrate an interesting substituent effect on PAs. The PAs of ring carbon atoms for a series of monosubstituted benzene molecules (Y-C(6)H(5); Y = F, Cl, CH(3), OCH(3), NH(2), PH(2), OH, SH, SiH(3), CN, CF(3), and NO(2)) have also been estimated. Correlations between proton affinities of H-X, H(3)C-X, and Ph-X and substituent effects on the PAs of the ring carbon atoms for a series of monosubstituted benzene molecules have been studied. It has been observed that substituent effects on the PAs of the ring carbon atoms follow a good Hammett-type correlation.     

Iron-catalyzed homo-coupling of simple and functionalized arylmagnesium reagents

Iron-catalyzed homo-coupling of simple and functionalized arylmagnesium reagents is described. The reaction is highly chemoselective (CN, COOEt and NO(2) groups are tolerated). The procedure was used to perform intramolecular couplings. This cyclization reaction is the key step of the total synthesis of the N-methylcrinasiadine.     

Reliable low-cost theoretical procedures for studying addition-fragmentation in RAFT polymerization

Enthalpies for the beta-scission reactions, R'SC(*)(Z)SR --> R'SC(Z)=S + (*)R (for R, R' = CH(3), CH(2)CH(3), CH(2)CN, C(CH(3))(2)CN, CH(2)COOCH(3), CH(CH(3))COOCH(3), CH(2)OCOCH(3), CH(2)Ph, C(CH(3))(2)Ph, and CH(CH(3))Ph and Z = CH(3), H, Cl, CN, CF(3), NH(2), Ph, CH(2)Ph, OCH(3), OCH(2)CH(3), OCH(CH(3))(2), OC(CH(3))(3), and F) have been calculated using a variety of DFT, MP2, and ONIOM-based methods, as well as G3(MP2)-RAD, with a view to identifying an accurate method that can be practically applied to larger systems. None of the DFT methods examined can reproduce the quantitative, nor qualitative, values of the fragmentation enthalpy; in most cases the relative errors are over 20 kJ mol(-1) and in some cases as much as 55 kJ mol(-1). The ROMP2 methods fare much better, but fail when the leaving group radical (R(*)) is substituted with a group (such as phenyl or CN) that delocalizes the unpaired electron. However, provided the primary substituents on the leaving group radical are included in the core system, an ONIOM-based approach in which the full system is studied via ROMP2 (or SCS- or SOS-MP2) calculations with the 6-311+G(3df,2p) basis set and the core system is studied at G3(MP2)-RAD can reproduce the corresponding G3(MP2)-RAD values of the full systems within 5 kJ mol(-1) and is a practical method for use on larger systems.     

VO(salen)(X) catalysed asymmetric cyanohydrin synthesis: an unexpected influence of the nature of anion X on the catalytic activity

The nature of the anionic ligand X (X = EtOSO3, BF4, Cl, Br, OSO2CF3, F or CN) in vanadium(V)salen complexes [V+ O(salen) X-] was found to have a significant influence on the catalytic activity of the complexes, but not on their enantioselectivities; with the complexes in which X = Cl or F being most active and the complex with X = OSO2CF3 being totally inactive.     

Mixed-metal assemblies containing multiply bonded dirhenium species linked through thiocyanate- and cyanide-containing bridging units

The lability of the terminal Re-Cl bond that is cis to the bridging CO ligand in the edge-sharing bioctahedral complexes Re(2)(mu-Cl)(mu-CO)(mu-PP)(2)Cl(3)(L), where PP = Ph(2)PC(=CH(2))PPh(2) (dppE) when L = CO (1) and PP = Ph(2)PCH(2)PPh(2) (dppm) when L = CO (2) or XyINC (3), has been exploited in the preparation of mixed-metal Re(4)Pd(2), Re(2)Ag, Re(2)W, Re(2)Pt, and Re(2)Rh assemblies, in which the dirhenium units are bound to the other metals through NCS or CN bridges. These complexes, which retain the Re=Re bonds of the parent dirhenium complexes, comprise the novel centrosymmetric complex [Re(2)Cl(3)(mu-dppE)(2)(CO)(2)(mu-NCS)](2)Pd(2)(mu-SCN)(mu-NCS)Cl(2) (9), and the trimetallic complexes Re(2)Cl(3)(mu-dppE)(2)(CO)(2)[(mu-NC)Ag(CN)] (10), Re(2)Cl(3)(mu-dppE)(2)(CO)(2)[(mu-NC)W(CO)(5)] (11), [Re(2)Cl(3)(mu-dppE)(2)(CO)(2)[(mu-NC)Pt(CN)(CN-t-Bu)(2)]]PF(6) (12), [Re(2)Cl(3)(mu-dppE)(2)(CO)(2)[(mu-N(CN)(2))Rh(CO)(PPh(3))(2)]]O(3)SCF(3) (13), and Re(2)Cl(3)(mu-dppm)(2)(CO)(2)[(mu-NC)W(CO)(5)] (16). The identities of 9 and 16 have been established by X-ray crystallography, and all complexes characterized by IR and NMR spectroscopy and cyclic voltammetry. The reactions of the dicarbonyl complex 1, and the isomeric pair of complexes Re(2)Cl(4)(mu-dppm)(2)(CO)(CNXyl), which have edge-sharing bioctahedral (ESBO) (3) and open bioctahedral (OBO) (4) geometries, with Na[N(CN)(2)] and K[C(CN)(3)] have been used to prepare complexes in which the uncoordinated CN groups have the potential to coordinate other mono- or dimetal units to form extended arrays. The complexes which have been prepared and characterized are the monosubstituted species Re(2)Cl(3)(X)(mu-dppE)(2)(CO)(2) (X = N(CN)(2) (14) or C(CN)(3) (15)) and Re(2)Cl(3)(X)(mu-dppm)(2)(CO)(CNXyl) (X = N(CN)(2) (17) or C(CN)(3) (18) with ESBO structures; X = N(CN)(2) (19) or C(CN)(3) (20) with OBO structures), of which 15, 18, and 20 have been characterized by single-crystal X-ray structure determinations. The substitutional labilities of the Re-Cl bonds in the complexes Re(2)Cl(4)(mu-dppm)(2)(CO) (5), Re(2)Cl(4)(mu-dppm)(2)(CNXyl) (6), and Re(2)Cl(4)(mu-dppm)(2) (7) toward Na[N(CN)(2)] and K[C(CN)(3)] have also been explored and the complexes Re(2)Cl(3)(X)(mu-dppm)(2)(CO) (X = N(CN)(2) (21) or C(CN)(3) (22)), Re(2)Cl(3)(X)(mu-dppm)(2)(CNXyl) (X = N(CN)(2) (23) or C(CN)(3) (24)), Re(2)Cl(2)(X)(2)(mu-dppm)(2)(CNXyl) (X = N(CN)(2) (25) or C(CN)(3) (26)), Re(2)[N(CN)(2)](4)(mu-dppm)(2) (27), and Re(2)[C(CN)(3)](4)(mu-dppm)(2) (28) isolated in good yield. Single-crystal X-ray structure determinations of 24, 26, and 27 have shown that the Re-Re triple bonds present in the starting materials 5-7 are retained in these products.     

Substituent cross-interaction effects on the electronic character of the C=N bridging group in substituted benzylidene anilines--models for molecular cores of mesogenic compounds. A 13C NMR study and comparison with theoretical results

13C NMR chemical shifts delta(C)(C=N) were measured in CDCl3 for a wide set of mesogenic molecule model compounds, viz. the substituted benzylidene anilines p-X-C6H4CH=NC6H4-p-Y (X = NO2, CN, CF3, F, Cl, H, Me, MeO, or NMe2; Y = NO2, CN, F, Cl, H, Me, MeO, or NMe2). The substituent dependence of delta(C)(C=N) was used as a tool to study electronic substituent effects on the azomethine unit. The benzylidene substituents X have a reverse effect on delta(C)(C=N): electron-withdrawing substituents cause shielding, while electron-donating ones behave oppositely, the inductive effects clearly predominating over the resonance effects. In contrast, the aniline substituents Y exert normal effects: electron-withdrawing substituents cause deshielding, while electron-donating ones cause shielding of the C=N carbon, the strengths of the inductive and resonance effects being closely similar. Additionally, the presence of a specific cross-interaction between X and Y could be verified. The electronic effects of the neighboring aromatic ring substituents systematically modify the sensitivity of the C=N group to the electronic effects of the benzylidene or aniline ring substituents. Electron-withdrawing substituents on the aniline ring decrease the sensitivity of delta(C)(C=N) to the substitution on the benzylidine ring, while electron-donating substituents have the opposite effect. In contrast, electron-withdrawing substituents on the benzylidene ring increase the sensitivity of delta(C)(C=N) to the substituent on the aniline ring, while electron-donating substituents act in the opposite way. These results can be rationalized in terms of the substituent-sensitive balance of the electron delocalization (mesomeric effects). The present NMR characteristics are discussed as regards the computational literature data. Valuable information has been obtained on the effects of the substituents on the molecular core of the mesogenic model compounds.     

Efficient synthesis of functionalized furans via ruthenium-catalyzed cyclization of epoxyalkyne derivatives

Ruthenium catalyst TpRuPPh(3)(CH(3)CN)(2)Cl is found to effect the cyclization of epoxyalkynes to furans in the presence of Et(3)N. The reactions worked well for various epoxyalkynes with suitable oxygen and nitrogen functionalities with low loading of catalyst. It failed with disubstituted epoxyalkynes. The mechanism was elucidated by a deuterium labeling experiment that suggested that the mechanism involved a ruthenium-vinylidenium intermediate.     

Haloacyl complexes of boron, [(CF3)3BC(O)Hal]- (Hal=F, Cl, Br, I)

The haloacyltris(trifluoromethyl)borate anions [(CF3)3BC(O)Hal]- (Hal=F, Cl, Br, I) have been synthesized by reacting (CF3)3BCO with either MHal (M=K, Cs; Hal=F) in SO2 or MHal (M=[nBu4N]+, [Et4N]+, [Ph4P]+; Hal=Cl, Br, I) in dichloromethane. Metathesis reactions of the fluoroacyl complex with Me3SiHal (Hal=Cl, Br, I) led to the formation of its higher homologues. The thermal stabilities of the haloacyltris(trifluoromethyl)borates decrease from the fluorine to the iodine derivative. The chemical reactivities decrease in the same order as demonstrated by a series of selected reactions. The new [(CF3)3BC(O)Hal]- (Hal=F, Cl, Br) salts are used as starting materials in the syntheses of novel compounds that contain the (CF3)3B-C fragment. All borate anions [(CF3)3BC(O)Hal]- (Hal=F, Cl, Br, I) have been characterized by multinuclear NMR spectroscopy (11B, 13C, 17O, 19F) and vibrational spectroscopy. [PPh4][(CF3)3BC(O)Br] crystallizes in the monoclinic space group P2/c (no. 13) and the bond parameters are compared with those of (CF3)3BCO and K[(CF3)3BC(O)F]. The interpretation of the spectroscopic and structural data are supported by DFT calculations [B3LYP/6-311+G(d)].     

High-accuracy thermochemistry of atmospherically important fluorinated and chlorinated methane derivatives

High-precision quantum chemical calculations have been performed for atmospherically important halomethane derivatives including CF, CF(3), CHF(2), CH(2)F, CF(2), CF(4), CHF, CHF(3), CH(3)F, CH(2)F(2), CCl, CCl(3), CHCl(2), CH(2)Cl, CCl(2), CCl(4), CHCl, CHCl(3), CH(3)Cl, CH(2)Cl(2), CHFCl, CF(2)Cl, CFCl(2), CFCl, CFCl(3), CF(2)Cl(2), CF(3)Cl, CHFCl(2), CHF(2)Cl, and CH(2)FCl. Theoretical estimates for the standard enthalpy of formation at 0 and 298.15 K as well as for the entropy at 298.15 K are presented. The determined values are mostly within the experimental uncertainty where accurate experimental results are available, while for the majority of the considered heat of formation and entropy values the present results represent the best available estimates.     

Tuning redox potentials of bis(imino)pyridine cobalt complexes: an experimental and theoretical study involving solvent and ligand effects

The structure and electrochemical properties of a series of bis(imino)pyridine Co(II) complexes (NNN)CoX(2) and [(NNN)(2)Co][PF(6)](2) (NNN = 2,6-bis[1-(4-R-phenylimino)ethyl]pyridine, with R = CN, CF(3), H, CH(3), OCH(3), N(CH(3))(2); NNN = 2,6-bis[1-(2,6-(iPr)(2)-phenylimino)ethyl]pyridine and X = Cl, Br) were studied using a combination of electrochemical and theoretical methods. Cyclic voltammetry measurements and DFT/B3LYP calculations suggest that in solution (NNN)CoCl(2) complexes exist in equilibrium with disproportionation products [(NNN)(2)Co](2+) [CoCl(4)](2-) with the position of the equilibrium heavily influenced by both the solvent polarity and the steric and electronic properties of the bis(imino)pyridine ligands. In strong polar solvents (e.g., CH(3)CN or H(2)O) or with electron donating substituents (R = OCH(3) or N(CH(3))(2)) the equilibrium is shifted and only oxidation of the charged products [(NNN)(2)Co](2+) and [CoCl(4)](2-) is observed. Conversely, in nonpolar organic solvents such as CH(2)Cl(2) or with electron withdrawing substituents (R = CN or CF(3)), disproportionation is suppressed and oxidation of the (NNN)CoCl(2) complexes leads to 18e(-) Co(III) complexes stabilized by coordination of a solvent moiety. In addition, the [(NNN)(2)Co][PF(6)](2) complexes exhibit reversible Co(II/III) oxidation potentials that are strongly dependent on the electron withdrawing/donating nature of the N-aryl substituents, spanning nearly 750 mV in acetonitrile. The resulting insight on the regulation of redox properties of a series of bis(imino)pyridine cobalt(II) complexes should be particularly valuable to tune suitable conditions for reactivity.