Estimation of source infrared spectra profiles of acetylspiramycin active components from troches using kernel independent component analysis

Kernel independent component analysis (KICA), a kind of independent component analysis (ICA) algorithms based on kernel, was preliminarily investigated for blind source separation (BSS) of source spectra profiles from troches. The robustness of different ICA algorithms (KICA, FastICA and Infomax) was first checked by using them in the retrieval of source infrared (IR), ultraviolet (UV) and mass spectra (MS) from synthetic mixtures. It was found that KICA is the most robust method for retrieval of source spectra profiles. KICA algorithm is subsequently adopted in the analysis of diffuse reflection IR of acetylspiramycin (ASPM) troches. It is observed that KICA is able to isolate the theoretically predicted spectral features corresponding to the ASPM active components, excipients and other minor components as different independent (spectral) component. A troche can be authenticated and semi-quantified using the estimated ICs. KICA is an useful method for estimation of source spectral features of molecules with different geometry and stoichiometry, while features belonging to very similar molecules remain grouped.     

Identifying constituents in commercial gasoline using Fourier transform-infrared spectroscopy and independent component analysis

A new method is proposed that enables the identification of five refinery fractions present in commercial gasoline mixtures using infrared spectroscopic analysis. The data analysis and interpretation was carried out based on independent component analysis (ICA) and spectral similarity techniques. The FT-IR spectra of the gasoline constituents were determined using the ICA method, exclusively based on the spectra of their mixtures as a blind separation procedure, i.e. assuming unknown the spectra of the constituents. The identity of the constituents was subsequently determined using similarity measures commonly employed in spectra library searches against the spectra of the constituent components. The high correlation scores that were obtained in the identification of the constituents indicates that the developed method can be employed as a rapid and effective tool in quality control, fingerprinting or forensic applications, where gasoline constituents are suspected.     

Independent component analysis (ICA) algorithms for improved spectral deconvolution of overlapped signals in 1H NMR analysis: application to foods and related products

The major challenge facing NMR spectroscopic mixture analysis is the overlapping of signals and the arising impossibility to easily recover the structures for identification of the individual components and to integrate separated signals for quantification. In this paper, various independent component analysis (ICA) algorithms [mutual information least dependent component analysis (MILCA); stochastic non‐negative ICA (SNICA); joint approximate diagonalization of eigenmatrices (JADE); and robust, accurate, direct ICA algorithm (RADICAL)] as well as deconvolution methods [simple‐to‐use‐interactive self‐modeling mixture analysis (SIMPLISMA) and multivariate curve resolution‐alternating least squares (MCR‐ALS)] are applied for simultaneous ¹H NMR spectroscopic determination of organic substances in complex mixtures. Among others, we studied constituents of the following matrices: honey, soft drinks, and liquids used in electronic cigarettes. Good quality spectral resolution of up to eight‐component mixtures was achieved (correlation coefficients between resolved and experimental spectra were not less than 0.90). In general, the relative errors in the recovered concentrations were below 12%. SIMPLISMA and MILCA algorithms were found to be preferable for NMR spectra deconvolution and showed similar performance. The proposed method was used for analysis of authentic samples. The resolved ICA concentrations match well with the results of reference gas chromatography–mass spectrometry as well as the MCR‐ALS algorithm used for comparison. ICA deconvolution considerably improves the application range of direct NMR spectroscopy for analysis of complex mixtures. Copyright © 2014 John Wiley & Sons, Ltd.     

A new approach to near-infrared spectral data analysis using independent component analysis

This paper presents a new approach to near-infrared spectral (NIR) data analysis that is based on independent component analysis (ICA). The main advantage of the new method is that it is able to separate the spectra of the constituent components from the spectra of their mixtures. The separation is a blind operation, since the constituent components of mixtures can be unknown. The ICA based method is therefore particularly useful in identifying the unknown components in a mixture as well as in estimating their concentrations. The approach is introduced by reference to case studies and compared to other techniques for NIR analysis including principal component regression (PCR), multiple linear regression (MLR), and partial least squares (PLS) as well as Fourier and wavelet transforms.     

Characterization of radix rehmanniae processing procedure using FT-IR spectroscopy through nonnegative independent component analysis

A method is proposed for monitoring the radix rehmanniae proparate processing procedure and determining the endpoint of the process using attenuated total reflectance (ATR) FT-IR through nonnegative independent component analysis (ICA). In the proposed method, ATR FT-IR spectra of the samples were firstly measured at different steaming periods. Then, nonnegative ICA was used for direct estimation of the feature spectra of the pure components in the mixture without pre-separation and other prior information. The estimated independent components (ICs) and their variation of the relative concentrations were used to characterize the processing procedure and determine the endpoint. The results show that the estimated three ICs are consistent with that of the chemical components in the mixtures, i.e. catalpol/rehmaionoside, glucose, and other compounds that nearly keep invariant during the processing procedure. The endpoint determined by the IR-ICA method is 15 h, which was located in the range obtained by expert sensory analysis, whereas the endpoint determined by the traditional sensory analysis is 14 ∼ 17 h and even 14 ∼ 20 h, which showed the significant deviation of the endpoints determined by different operators. Figure Characterisation of radix rehmanniae processing procedure using FT-IR spectroscopy through nonnegative independent component analysis     

A new regression method based on independent component analysis

Based on independent component analysis (ICA), a new regression method, independent component regression (ICR), was developed to build the model of NIR spectra and the routine components of plant samples. It is found that ICR and principal component regression (PCR) are completely equivalent when they are applied in quantitative prediction. However, independent components (ICs) can give more chemical explanation than principal components (PCs) because independence is a high-order statistic that is a much stronger condition than orthogonality. Three ICs are obtained by ICA from the NIR spectra of plant samples; it is found that they are strongly correlated to the NIR spectra of water, hydrocarbons and organonitrogen compounds, respectively. Therefore, ICA may be a promising tool to retrieve both quantitative and qualitative information from complex chemical data sets.     

Independent component analysis as a pretreatment method for parallel factor analysis to eliminate artefacts from multiway data

Parallel factor analysis (PARAFAC) has successfully been used in many applications for the analysis of excitation-emission fluorescence data. However, some measurement “artefacts”, such as Rayleigh or Raman scattering, can pose a problem for the extraction of the PARAFAC components and their interpretation. Replacing the spectral zones corresponding to these signals by missing values in the data is not necessarily a method of choice in the cases where informative signals lie in the same wavelength regions. In this article, independent component analysis (ICA) is used on the unfolded cubic array, and the independent components related to the Rayleigh and Raman scattering are identified and removed prior to the reconstruction of the excitation-emission fluorescence data cube. PARAFAC is then applied on these data reconstructed after selective artefact removal, and satisfactory models can be obtained. This procedure, although particularly useful for 3D fluorescence data, may be applied to other types of data as well.     

Standardless multicomponent qNMR analysis of compounds with overlapped resonances based on the combination of ICA and PULCON

A fast and reliable nuclear magnetic resonance (NMR) method for quantitative analysis of targeted compounds with overlapped signals in complex mixtures has been established. The method is based on the combination of chemometric treatment for spectra deconvolution and the PULCON principle (pulse length based concentration determination) for quantification. Independent component analysis (ICA) (mutual information least dependent component analysis (MILCA) algorithm) was applied for spectra deconvolution in up to six component mixtures with known composition. The resolved matrices (independent components, ICs and ICA scores) were used for identification of analytes, calculating their relative concentrations and absolute integral intensity of selected resonances. The absolute analyte concentrations in multicomponent mixtures and authentic samples were then calculated using the PULCON principle. Instead of conventional application of absolute integral intensity in case of undisturbed signals, the multiplication of resolved IC absolute integral and its relative concentration in the mixture for each component was used. Correction factors that are required for quantification and are unique for each analyte were also estimated. The proposed method was applied for analysis of up to five components in lemon and orange juice samples with recoveries between 90% and 111%. The total duration of analysis is approximately 45 min including measurements, spectra decomposition and quantification. The results demonstrated that the proposed method is a promising tool for rapid simultaneous quantification of up to six components in case of spectral overlap and the absence of reference materials. Copyright © 2015 John Wiley & Sons, Ltd.     

Application of MATLAB package for the automation of the chemometric processing of spectrometric signals in the analysis of complex mixtures

We describe three types of automatic software for the chemometric processing of spectrometric data. The software was developed in the MATLAB working environment and includes data import, mathematical preprocessing, chemometric analysis, and generation of a report file. The software is designed to solve problems regarding identification of some components of multicomponent mixtures, determination of compounds with overlapping signals, and differentiation of samples by their spectral responses. To test the software, we present examples of spectrometric analyses of coffee, fruit juices, and alcoholic beverages using chemometric methods of independent component analysis (ICA) and partial least squares–discriminant analysis (PLS–DA). In particular, we simulated electronic absorption spectra for the identification of three artificial colors (E110, E102, and E122) in alcoholic beverages, NMR spectra for the simultaneous determination of five components (acetic acid, γ-aminobutyric acid, arginine, acetaldehyde, and proline) in orange juice without using reference standards, and NMR spectra of coffee samples to determine its varietal authenticity (Arabica or Robusta). The duration of automatic chemometric processing did not exceed 1 min per sample. The developed software can be optimized for other matrices and/or brands of spectrometers.     

独立组分分析在红外光谱分析中的应用

针对红外光谱的黑色体系分析,提出了一种基于独立组分分析(ICA)的红外光谱定性分析方法.其主要优点在于可从混合光谱中分离出独立组分的光谱,且这种分离是盲源分离,混合物的组分预先是未知的.对ICA在正己醇、丙酮和正丁醇的混合中红外光谱分离中的应用进行了研究,验证了体系的独立性,并对ICA算法做了一定的改进,讨论了各种预处理方法对其分离结果的误差.     

Cross validation and uncertainty estimates in independent component analysis

A data analysis tool, known as independent component analysis (ICA), is the main focus of this paper. The theory of ICA is briefly reviewed, and the underlying statistical assumptions and a practical algorithm are described. This paper introduces cross validation/jack-knifing and significance tests to ICA. Jack-knifing is applied to estimate uncertainties for the ICA loadings, which also serve as a basis for significance tests. These tests are shown to improve ICA performance, indicating how many components are mixed in the observed data, and also which parts of the extracted sources that contain significant information. We address the issue of stability for the ICA model through uncertainty plots. The ICA performance is compared to principal component analysis (PCA) for two selected applications, a simulated experiment and a real world application.     

Independent Components Analysis of the Overlapping Voltammetric Signals

This paper introduces the Independent Components Analysis (ICA) to voltammetry and extends possibility of the qualitative and quantitative analysis of binary mixtures of similar oxidation/reduction potentials. It was demonstrated that even in the case of distance between peaks potentials equal to 10 mV, determinations may be realized according to typical validation criteria. The methodology was presented using the simulated data and capabilities and limitations of the method were described. Further, the usefulness of ICA was presented for voltammograms registered during simultaneous determination of copper and antimony, and thallium and indium. The results of high practical importance for chemical analysis were achieved and documented. In the quantitative analysis a property was extensively used, that ICA is an unsupervised method.     

Quantification of target components in complex mixtures using alternative moving window factor analysis and two-step iterative constraint method

Alternative moving window factor analysis (AMWFA) has shown the powerfulness for comprehensive comparison and individual identification of chemical components among different but related mixture systems. However, quantification of these components can only be attained after extraction of all spectra of pure components in samples with least square technique. In this study, a novel two-step iterative constraint method (TICM) is developed for independent quantification of the interested target analytes. The pure chromatographic profiles of the components can be mined out from mixtures with high complexity using a two-step iterative operation and stepwise purification of the targets from interferers. Some effective constraints of chromatographic profiles, such as non-negative and single-peaked properties, as well as zero-concentration outside of elution windows of components, are employed to further improve the efficiency of the method. One of the strong advantages of TICM is simplification of complex mixtures to several sub-systems for processing easily with the help of AMWFA, as well as bi-linear property of data sets obtained from coupled chromatographic instruments. It meets the urgent requirements and challenges of qualitative and quantitative analysis of complicated systems with multi-component in the investigation of herbal medicines (HMs), metabonomics and systems biology. From the results of simulated LC–DAD data, GC–MS data of volatile chemical components in three kinds of ginseng with different growth conditions, and four different medicinal parts of the same herb, good performance of the proposed method is achieved.     

Chemometrics-assisted spectrophotometric method for simultaneous determination of vitamins in complex mixtures

An advanced independent component analysis algorithm (MILCA) is applied for simultaneous chemometric determination of fat- and water-soluble vitamins in complex mixtures. The analysis is based on the decomposition of spectra of multicomponent mixtures in the UV region. The key features of the proposed method are simplicity, accuracy, and reliability. Comparisons between the new algorithm and other established methods (MCR-ALS, SIMPLISMA, other ICA techniques) were made. Our results indicate that in most cases, MILCA is comparable or even outperforms other chemometrics methods taken for comparisons. The influence of different factors (abundance of components, noise, step of spectral scan, and scan speed) on decomposition performance has been investigated. The optimal conditions for spectroscopic registration have been identified. The proposed method was used for analysis of model mixtures and real objects (multivitamin drugs, food additives, and energy drinks). The resolved concentrations match well with the declared amounts and the results of reference methods.     

Estimation of source spectra profiles and simultaneous determination of polycomponent in mixtures from ultraviolet spectra data using kernel independent component analysis and support vector regression

A method that use kernel independent component analysis (KICA) and support vector regression (SVR) was proposed for estimation of source ultraviolet (UV) spectra profiles and simultaneous determination of polycomponents in mixtures. In KICA-SVR procedure, the UV source spectra profiles were estimated using KICA, then the mixing matrix of the components were calculated using the estimated sources, and the calibration model was build using SVR based on the calculated mixing matrix. A simulated UV dataset of three-component mixtures was used to test the ability of KICA for estimating source spectra profiles from spectra data of mixtures. It was found that KICA has the potential power to estimate pure UV spectra profiles, and correlation coefficient of estimated sources correspond to the real adopted ones are better compared with that by FastICA and Infomax ICA. An UV dataset of polycomponent vitamin B was processed using the proposed KICA-SVR method. The results show that the estimated source spectra profiles are correlative with the real UV spectra of the components and chemically interpretable, and accurate results were obtained.     

Choline Chloride-Based DES as Solvents/Catalysts/Chemical Donors in Pharmaceutical Synthesis

DES are mixtures of two or more compounds, able to form liquids upon mixing, with lower freezing points when compared to the individual constituents (eutectic mixtures). This attitude is due to the specific hydrogen-bond interactions network between the components of the mixture. A notable characteristic of DES is the possibility to develop tailor-made mixtures by changing the components ratios or a limited water dilution, for special applications, making them attractive for pharmaceutical purposes. In this review, we focused our attention on application of ChCl-based DES in the synthesis of pharmaceutical compounds. In this context, these eutectic mixtures can be used as solvents, solvents/catalysts, or as chemical donors and we explored some representative examples in recent literature of such applications.     

A new statistical method for the automated detection of peaks in UV-DAD chromatograms of a sample mixture

One of the major issues within the context of the fully automated development of chromatographic methods consists of the automated detection and identification of peaks coming from complex samples such as multi-component pharmaceutical formulations or stability studies of these formulations. The same problem can also occur with plant materials or biological matrices. This step is thus critical and time-consuming, especially when a Design of Experiments (DOE) approach is used to generate chromatograms. The use of DOE will often maximize the changes of the analytical conditions in order to explore an experimental domain. Unfortunately, this generally provides very different and “unpredictable” chromatograms which can be difficult to interpret, thus complicating peak detection and peak tracking (i.e. matching peaks among all the chromatograms). In this context, Independent Components Analysis (ICA), a new statistically based signal processing methods was investigated to solve this problem. The ICA principle assumes that the observed signal is the resultant of several phenomena (known as sources) and that all these sources are statistically independent. Under those assumptions, ICA is able to recover the sources which will have a high probability of representing the constitutive components of a chromatogram. In the present study, ICA was successfully applied for the first time to HPLC–UV-DAD chromatograms and it was shown that ICA allows differentiation of noise and artifact components from those of interest by applying clustering methods based on high-order statistics computed on these components. Furthermore, on the basis of the described numerical strategy, it was also possible to reconstruct a cleaned chromatogram with minimum influence of noise and baseline artifacts. This can present a significant advance towards the objective of providing helpful tools for the automated development of liquid chromatography (LC) methods. It seems that analytical investigations could be shortened when using this type of methodologies.     

A REVIEW OF HYPHENATED CHROMATOGRAPHIC INSTRUMENTATION

Samples presented for chemical analysis are invariably mixtures, often very complex mixtures. This has led to the widespread acceptance and application of what have become called hyphenated chromatographic techniques. These techniques are combinations of chromatographic instrumentation with some (usually) spectroscopic technique. In this review, we treat the most important and useful of these combinations. The basic instrumental features of each method are described, and possible applications are discussed. The relative capabilities of each technique are weighed, and tradeoffs are discussed. In closing, a list of suggested further reading is provided.     

Adaptive kernel independent component analysis and UV spectrometry applied to characterize the procedure for processing prepared rhubarb roots

By determination of the number of absorptive chemical components (ACCs) in mixtures using median absolute deviation (MAD) analysis and extraction of spectral profiles of ACCs using kernel independent component analysis (KICA), an adaptive KICA (AKICA) algorithm was proposed. The proposed AKICA algorithm was used to characterize the procedure for processing prepared rhubarb roots by resolution of the measured mixed raw UV spectra of the rhubarb samples that were collected at different steaming intervals. The results show that the spectral features of ACCs in the mixtures can be directly estimated without chemical and physical pre-separation and other prior information. The estimated three independent components (ICs) represent different chemical components in the mixtures, which are mainly polysaccharides (IC1), tannin (IC2), and anthraquinone glycosides (IC3). The variations of the relative concentrations of the ICs can account for the chemical and physical changes during the processing procedure: IC1 increases significantly before the first 5 h, and is nearly invariant after 6 h; IC2 has no significant changes or is slightly decreased during the processing procedure; IC3 decreases significantly before the first 5 h and decreases slightly after 6 h. The changes of IC1 can explain why the colour became black and darkened during the processing procedure, and the changes of IC3 can explain why the processing procedure can reduce the bitter and dry taste of the rhubarb roots. The endpoint of the processing procedure can be determined as 5-6 h, when the increasing or decreasing trends of the estimated ICs are insignificant. The AKICA-UV method provides an alternative approach for the characterization of the processing procedure of rhubarb roots preparation, and provides a novel way for determination of the endpoint of the traditional Chinese medicine (TCM) processing procedure by inspection of the change trends of the ICs.     

Uncommon multivariate statistical methods for environmental studies: A review

In this paper we describe the characteristics and the applications of the multivariate methods for spectroscopic and chromatographic techniques independent component analysis (ICA) and two-dimensional correlation spectroscopy (2DCOS) focused to their use in environmental studies. In our opinion, these methods are important because they allow to characterize environmental samples with different aims and scopes from those generally obtained by means of more common multivariate methods such as principal component analysis (PCA) and partial least squares (PLS). The new insights of these methods in recent environmental studies are reviewed and debated.