卷烟主流烟气中氨的捕集及其离子色谱法测定

设计了高效的烟气捕集装置,建立了一种稀硫酸吸收、离子色谱法测定的卷烟主流烟气中氨的分析新方法.与早期的比色法、容量法、氨电极法、气相色谱法相比,该方法快速、简便,不需要复杂的样品前处理,完成一次分析只需12 min.检出限为0.005 mg/L,RSD为3.7%,空白加标回收率在87%～102%之间,吸烟加标回收率在98%～106%之间.测定了国内50种主要品牌卷烟,其主流烟气中氨含量范围为6.50～14.22μg/支烟.     

Iron pentacarbonyl detection limits in the cigarette smoke matrix using FT-IR spectroscopy

Endogenous metals present in tobacco from agricultural practices have been purported to generate metal carbonyls in cigarette smoke. Transition metal catalysts, such as iron oxide, have been investigated for the reduction of carbon monoxide (CO) in cigarette smoke. These studies motivated the development of an analytical method to determine if iron pentacarbonyl [Fe(CO)(5)] is present in mainstream smoke from cigarette models having cigarette paper made with iron oxide. An FT-IR puff-by-puff method was developed and the detection limit was determined using two primary reference spectra from different sources to estimate the amount of Fe(CO)(5) present in a high-pressure steel cylinder of CO. We do not detect Fe(CO)(5) in a single 35 mL puff from reference cigarettes or from those cigarette models having cigarette paper made with iron oxide, with a 30-ppbV limit of detection (LOD). Also, it was shown that a filter containing activated carbon would remove Fe(CO)(5).     

Measurement of acrolein and 1,3-butadiene in a single puff of cigarette smoke using lead-salt tunable diode laser infrared spectroscopy

Acrolein and 1,3-butadiene in cigarette smoke generally are measured using two separate analytical methods, a carbonyl derivative HPLC method for acrolein and a volatile organic compound (VOC) GC/MS method for 1,3-butadiene. However, a single analytical method having improved sensitivity and real-time per puff measurement will offer more specific information for evaluating experimental carbon filtered cigarettes designed to reduce the smoke deliveries of these constituents. This paper describes an infrared technique using two lead-salt tunable diode lasers (TDLs) operating with liquid nitrogen cooling with emissions at 958.8 cm(-1) and 891.0 cm(-1) respectively for the simultaneous measurement of acrolein and 1,3-butadiene, respectively, in each puff of mainstream cigarette smoke in real time. The dual TDL system uses a 3.1l volume, 100 m astigmatic multiple pass absorption gas cell. Quantitation is based on a spectral fit that uses previously determined infrared molecular line parameters generated in our laboratory, including line positions, line strengths and nitrogen-broadened half-widths for these species. Since acrolein and ethylene absorption lines overlap and 1,3-butadiene, ethylene and propylene absorption lines overlap, the per puff deliveries of ethylene and propylene were determined since their overlapping absorption lines must be taken into account by the spectral fit. The acrolein and 1,3-butadiene total cigarette deliveries for the 1R5F Kentucky Reference cigarette were in agreement with the HPLC and GC/MS methods, respectively. The limit of detection (LOD) for 1,3-butadiene and acrolein was 4 ng/puff and 24 ng/puff, respectively, which is more than adequate to determine at which puff they break through the carbon filter. The retention and breakthrough behavior for the two primary smoke constituents depend on the cigarette design and characteristics of the carbon filter being evaluated.     

Ultra‐sensitive Amperometric Hydrazine Sensing via Dimethyl Glyoxomat Derived NiO Nanostructures

Here we report the synthesis of NiO nanostructures via glyoxomat assisted precipitation protocol using hydrothermal route under the influence of ammonia followed by annealing at 450 ^oC. These nanostructures were characterized via Scanning Electron Microscopy (SEM) and X‐ray Diffraction (XRD) method. The morphological investigation of the finally prepared NiO revealed foam‐like porous nanostructures. These NiO nanostructures were immobilized onto glassy carbon electrode (GCE) with nafion as binding material and used as highly sensitive and selective sensor for determining hydrazine in the range of 100–500 nM and 600–1600 nM with a calculated limit of detection (LOD) equal to 5 nM. The as prepared sensor was tested for the presence of various interfering species such as Na⁺, Cu²⁺, uric acid, hydrogen peroxide and glucose in the presence of equimolar concentration of hydrazine and negligible interference was noticed. The sensor was further tested for hydrazine detection using square wave voltammetry (SWV) however it only worked in the range of 50–1200 μM. Finally the sensor was successfully implemented for hydrazine determination in real water samples using amperometric protocol.     

Determination of Nicotine-Related Alkaloids in Tobacco and Cigarette Smoke by GC-FID

A simple and accurate method, gas chromatography (GC) with flame-ionization detection (FID) has been used for determination of the four main nicotine-related alkaloids in tobacco. Tobacco samples were treated with a small quantity of aqueous ammonia solution, to loosen the tobacco tissue and to convert all alkaloids to free bases, then extracted with 1:3 CH₃OH-CH₂Cl₂. A method for further simultaneous and comprehensive determination of six nicotine-related alkaloids in cigarette smoke was also developed. Because of the complexity of the cigarette smoke matrix and the small amounts of alkaloids, except nicotine, in cigarette smoke, the smoke extract was concentrated after removal of the acidic and neutral fractions. To reduce the adsorption and thermal degradation of alkaloids in the liner, especially for nornicotine, a suitable injector temperature was selected and pulsed injection mode was studied. Different cigarette smokes and tobaccos were analyzed for levels of nicotine-related alkaloids.Revised: 3 January and 21 March 2005     

Prediction of precision from signal and noise measurement in liquid chromatography: Limit of detection

Summary A method to determine the limit of detection (LOD) in high performance liquid chromatography (HPLC) is described. The power spectral density of instrumental baseline variation is fitted by the simplex least squares methods with a mixed random process of white noise and Markov process as a model. The white noise is characterized by standard deviation (SD),; the Markov process by the SD, , and auto-correlation degree, ρ. All required parameters for calculating the LOD signal are obtained by experiment without repeat measurements. No arbitrary constants are needed. The LOD signal is uniquely determined and is characterized by 33.3 % relative standard deviation (RSD) of analyte measurements and 0.13 % of the error of the first type. This signal also specifies that the signal-to-noise ratio =3, using the definition of noise originating from the white noise and Markov process. The theoretical conclusion is verified by the Monte Carlo simulation using real baseline and peaks. The LOD concentrations for naphthalene, acenaphthene, pyrene and perylene are given. First part of series cited as Ref. [1].     

Determining the lowest sulfur detection limit in diesel fuel by ultraviolet fluorescence

Abstract

This technical review article focuses on determining a robust and precise lower-level sulfur detection procedure. When measuring under 0.1?ppm and approaching zero values, the limits of the instrument are pushed to separate real signal response from noise. One of the performance parameters in method validation studies is to determine these near-zero value samples reliably when the instrument works near the noise signal level. The study examined the early stages of the method development process, regarding the determination of the validation parameters limit of blank, limit of detection (LOD), and limit of quantification (LOQ). The sulfur content in diesel fuel was determined with guidance from the standard ISO 20846:2011. The average sulfur readings of a diesel test sample and blank (99% iso-octane) were measured as 3.9 and 0.0196?ppm, respectively. For a 1.5% diluted diesel test sample the mean sulfur value was measured as 0.0613?ppm and this value was verified as the LOD. For a 3% diluted diesel test sample the mean sulfur value was measured as 0.1158?ppm and this result was verified as the LOQ. The LOD and LOQ were tested for conformity. The accuracy of these tested values was checked according to EUROCHEM guidelines.     

Intra-puff CO and CO2 measurements of cigarettes with iron oxide cigarette paper using quantum cascade laser spectroscopy

The objective of this research was to apply Fourier transform infrared spectroscopy (FTIR) and tunable infrared laser differential absorption spectroscopy (TILDAS) for measuring selected gaseous constituents in mainstream (MS) and sidestream (SS) smoke for experimental cigarettes designed to reduce MS CO using iron oxide cigarette papers. These two complimentary analytical techniques are well suited for providing per puff smoke deliveries and intra-puff evolution profiles in cigarette smoke respectively. The quad quantum cascade (QC) laser high resolution infrared spectroscopy system has the necessary temporal and spectral resolution and whole smoke analysis capabilities to provide detailed information for CO and CO(2) as they are being formed in both MS and SS smoke. The QC laser system has an optimal data rate of 20 Hz and a unique puffing system, with a square wave shaped puff, that allows whole smoke to enter an 18 m, 0.3 L multi-pass gas cell in real time (0.1s cell response time) requiring no syringe or Cambridge filter pad. Another similar multi-pass gas cell with a 36 m pathlength simultaneously monitors the sidestream cigarette smoke. The smoke from experimental cigarettes manufactured with two types of iron oxide papers were compared to the smoke from cigarettes manufactured similarly without iron oxide in the paper using both instrument systems. The delivery per puff determined by the QC laser method agreed with FTIR results. MS CO intra-puff evolution profiles for iron oxide prototype cigarettes demonstrated CO reduction when compared to cigarettes without iron oxide paper. Additionally, both CO and CO(2) intra-puff evolution profiles of the cigarettes with iron oxide paper showed a significant reduction at the initial portion of the 2 s puff not observed in the non-iron oxide prototype cigarettes. This effect also was observed for ammonia and ethylene, suggesting that physical parameters such as paper porosity and burn rate are important. The SS CO and CO(2) deliveries for the experimental cigarettes evaluated remained unaffected. The iron oxide paper technology remains under development and continues to be evaluated.     

Determination of molecular line parameters for acrolein (C(3)H(4)O) using infrared tunable diode laser absorption spectroscopy

Acrolein (C(3)H(4)O) molecular line parameters, including infrared (IR) absorption positions, strengths, and nitrogen broadened half-widths, must be determined since they are not included in the high resolution transmission (HITRAN) molecular absorption database of spectral lines. These parameters are required for developing a quantitative analytical method for measuring acrolein in a single puff of cigarette smoke using tunable diode laser absorption spectroscopy (TDLAS). The task is complex since acrolein has many highly overlapping infrared absorption lines in the room temperature spectrum and the cigarette smoke matrix contains thousands of compounds. This work describes the procedure for estimating the molecular line parameters for these overlapping absorption lines in the wavenumber range (958.7-958.9 cm(-1)) using quantitative reference spectra taken with the infrared lead-salt TDLAS instrument at different pressures and concentrations. The nitrogen broadened half-width for acrolein is 0.0937 cm(-1)atm(-1) and to our knowledge, is the first time it has been reported in the literature.     

Optical Gas Sensor Fabrication Based on Porphyrin-Anchored Electrostatic Self-Assembly onto Tapered Optical Fibers

Tapered optical fibers with nano-assembled coatings of thicknesses of order tens of nanometres were used for the detection of ammonia gas. The film coating was composed of alternate layers of tetrakis-(4-sulfophenyl) porphine (TSPP) and poly(allylamine hydrochloride) (PAH), which were deposited using the electrostatic self-assembly process (ESA). Exposure of a PAH/TSPP nano-assembled non-adiabatic tapered optical fiber with a waist diameter of 10 µm to ammonia induced significant optical changes in the transmission spectrum of the optical fiber. The fiber optic sensor showed a linear sensitivity to the concentration of ammonia in the range of 10–100 ppm, with response and recovery times less than 100 and 240 sec, respectively. The 3σ limit of detection (LOD) was estimated to be ca. 2 ppm.     

卷烟主流烟气中相关成分含量的快速检测方法

建立了一种快速测定卷烟主流烟气中相关成分的方法,其中包括一氧化碳、4-(甲基亚硝氨基)-3-吡啶-1-丁酮(NNK)、苯酚、巴豆醛、氨和氰化氢6种相关成分.采用在吸烟机上同时使用溶剂捕集和滤片捕集的方式,溶剂捕集氨、氰化氢和巴豆醛,滤片捕集NNK、氨、氰化氢和苯酚,样品采集后分别在高效液相色谱、离子色谱和液相色谱/质谱...     

一种基于协同效应的肼荧光探针及其在细胞成像中的应用

开发了一种基于协同效应的新型肼荧光探针.通过在发色团上引入两种不同的识别位点,双识别位点的协同效应使得该探针对肼具有良好的专一性和灵敏度,检测限可达0.05~10.0μmol·L^-1.此外,该探针还可用于细胞(Bt-474)中肼的检测.     

整体柱高效液相色谱法测定草甘膦原药中甲醛含量

建立了衍生化-高效液相色谱法对草甘膦原药中痕量甲醛含量进行测定的方法。样品中残留甲醛经超声波水浴提取，与2，4-二硝基苯肼衍生反应，生成的2，4-二硝基苯腙用反相整体柱色谱进行快速分离，在360nm紫外波长下检测，外标法定量。该分析方法在2．0～200mg/L浓度范围呈良好线性，添加回收率在88％～105％之间，相对标准偏差小于5％。样品中甲醛的最小检测浓度为0．5mg/kg。比较了整体色谱柱和常规C18反相柱分离效果，表明整体色谱柱可在1．5min内实现衍生化产物的快速分离并进行定性定量，同时发现相对于常规柱，采用整体柱提高了检测灵敏度约10倍。     

Evaluation of two liquid chromatography/tandem mass spectrometry platforms for quantification of monensin in animal feed and milk

Monensin is an anticoccidial drug that has been used as an additive in medicated feed. The United States Food and Drug Administration (USFDA) has included monensin in the national surveillance schemes for residues in foodstuff. In this study, two simple, selective and rapid methods were developed to determine monensin content in animal feed and milk. The methods enabled the detection of monensin residues as low as 1 ppb. Moreover, the two methods were used as models to compare two common liquid chromatography/tandem mass spectrometry (LC/MS/MS) platforms; an LC linear ion trap (LC/LIT) and an LC triple quadrupole (LC/QqQ). The two instrument platforms were evaluated for their matrix effect dependence, precision and accuracy. The LC/QqQ presented a lower limit of detection and limit of quantitation (LOD and LOQ) and showed less matrix dependence as compared to the LC/LIT. The LC/QqQ instrument also demonstrated a better intermediate precision. For example, the intermediate precision standard deviation calculated for 27 analyses across three days was 4% and 11% for LC/QqQ and LC/LIT, respectively. Overall, the LC/QqQ represents a better choice for analysis of monensin with respect to LOD, LOQ, matrix interference and precision. Copyright © 2010 John Wiley & Sons, Ltd.     

Prediction of precision from signal and noise measurement in liquid chromatography: Limit of detection

Summary A method to determine the limit of detection (LOD) in high performance liquid chromatography (HPLC) is described. The power spectral density of instrumental baseline variation is fitted by the simplex least squares methods with a mixed random process of white noise and Markov process as a model. The white noise is characterized by standard deviation (SD), w; the Markov process by the SD, m, and auto-correlation degree, . All required parameters for calculating the LOD signal are obtained by experiment without repeat measurements. No arbitrary constants are needed. The LOD signal is uniquely determined and is characterized by 33.3% relative standard deviation (RSD) of analyte measurements and 0.13% of the error of the first type. This signal also specifies that the signal-to-noise ratio=3, using the definition of noise originating from the white noise and Markov process. The theoretical conclusion is verified by the Monte Carlo simulation using real baseline and peaks. The LOD concentrations for naphthalene, acenaphthene, pyrene and perylene are given.First part of series cited as Ref. [1].     

一种检测水合肼荧光探针的合成与应用

基于香豆素类染料,设计合成了一种具有较高选择性和灵敏度,可在生理条件(pH 7.4)下检测水合肼的荧光探针,同时利用核磁共振和高分辨质谱对探针的分子结构进行了表征。基于水合肼进攻探针分子结构中的4-丁酸酯,生成酚氧负离子,同时发生分子内环化反应后生成具有强烈荧光的亚胺香豆素,实现了探针分子对水合肼的检测。光谱学研究表明,当向探针溶液加入水合肼(0~100μmol/L)后,探针溶液在绿色光谱区域(502 nm)呈现一个显著的荧光增强响应(增强至55倍)。并且,探针可以检测相对较低浓度的水合肼,检出限为1.7×10~(-7)mol/L。此外,相对于其他阴离子和亲核试剂,探针对水合肼的识别显示出较高的选择性和灵敏度。探针成功实现了细胞内水合肼的荧光成像,证明其在细胞成像中具有潜在的应用能力。     

A coumarin based chemodosimetric probe for ratiometric detection of hydrazine

A coumarin-based sensor containing trifluoroacetyl acetonate moiety was designed, synthesized, and applied for hydrazine detection. Hydrazinolysis of the chemodosimeter results in a prominent chromogenic and fluorescence ratiometric response toward hydrazine within 3 min. The probe is highly selective toward hydrazine over other important amines and other biologically and environmentally abundant analytes. The limit of detection (LOD) of the probe is in 10⁻⁶ M range. The sensing mechanism was supported by NMR and HRMS analysis. The experimentally observed change in structure and electronic properties of the sensor after reaction with hydrazine was modeled by Density Functional Theory (DFT) and Time Dependent Density Functional Theory (TDDFT) computational calculations, respectively.     

Collection and preparation of sidestream cigarette smoke for trace elemental determinations by graphite furnace atomic absorption spectrometry and inductively coupled plasma mass spectrometry.

A novel method for the collection and preparation of sidestream cigarette smoke condensate is described for trace elemental analysis by inductively coupled plasma mass spectrometry and graphite furnace atomic absorption spectrometry. The smoke collection method utilizes a specially designed chimney that collects and directs the sidestream smoke (SS) to a 2-stage trapping system consisting of an impaction trap followed by a 0.8 microm mixed cellulose ester filter. The samples are digested with nitric acid in a commercial heating block before analysis. The method limits of detection (LODs) are 1, 0.2, 2, 9, 6, and 7 ng/cigt for As, Cd, Pb, Ni, Se, and Cr, respectively. The SS collected from an industry reference cigarette, 1R4F, produced by the University of Kentucky was analyzed. The concentrations of As, Cd, and Pb in 1R4F were determined to be 27.3+/-2.1, 412+/-14, and 43.8+/-2.0 ng/cigt, respectively, while the concentrations of Ni, Cr, and Se are below the method LOD. Consequently, this novel method successfully addresses contamination, instrumentation, and collection issues for performing trace elemental analysis of sidestream cigarette smoke condensate.     

离子色谱法测定卷烟主流烟气中的硫化氢

建立了测定卷烟主流烟气中硫化氢含量的离子色谱法.采用玻璃纤维滤片捕集卷烟烟气粒相物,并用0.5%(体积分数)乙二胺-50 mmol/L氢氧化钠-250 mmol/L乙酸钠溶液萃取粒相物,吸收液吸收气相物中的硫化氢,合并粒相萃取液与气相吸收液,经离子色谱柱分离,以1.5 mol/L氢氧化钠-1 mol/L乙酸钠-2%(体积分数)乙二胺(40∶50∶10,体积比)为流动相,安培检测器检测并施加-100 mv的检测电位.运用方法对12种市售卷烟样品进行了测定,结果表明:方法的线性范围为0.1~5.0μg/mL,检出限为1.03μg/mL,定量限为3.41μg/mL,回收率为102.3%~107.2%,相对标准偏差小于5%.方法处理简单、准确度高,可以用于卷烟烟气中硫化氢含量的测定.     

Analysis of cigarette mainstream smoke for 1,1-dimethylhydrazine and vinyl acetate by gas chromatography-mass spectrometry

1,1-Dimethylhydrazine, also known as unsymdimethylhydrazine (UDMH) and vinyl acetate (VA), are both classified by the International Agency for Research on Cancer as 2B carcinogens (possibly carcinogenic to humans) and listed as cigarette smoke constituents; however, there is little or no quantitative data available on them. For UDMH in cigarette smoke, neither a yield nor a method has been published. For VA, the most recent information on yields dates back to 1965. To bridge this gap, we have developed new gas chromatographic-mass spectrometric methods for both compounds to determine their yields in cigarette smoke. UDMH is determined by derivatization with 2-nitrobenzaldehyde in methanol and is not found in cigarette smoke at levels above the detection limit of 19 ng/cig. In further experiments, when UDMH is added to the smoke stream or air stream of lit or unlit cigarettes, the derivative 2-nitrobenzaldehyde-2,2-dimethylhydrazone is found only in the air stream of the unlit cigarettes. From this, we conclude that UDMH is either not formed during smoking at all or, if it is, it reacts immediately and quantitatively with other smoke constituents (e.g., aldehydes) and is therefore not detectable in cigarette smoke. VA is determined by trapping in acetone at -78 degrees C and is found at a concentration of 270 ng/cig for a standard reference cigarette with a cellulose acetate filter (the reference cigarette 1 R4F). In the literature, VA is reported at concentrations of 1.6 microg/cig for a cigarette with a cellulose acetate/charcoal filter and 4 microg/cig for a cigarette with a cellulose acetate filter and for an unfiltered cigarette.