Tailoring porous silica films through supercritical carbon dioxide processing of fluorinated surfactant templates

The tailoring of porous silica thin films synthesized using perfluoroalkylpyridinium chloride surfactants as templating agents is achieved as a function of carbon dioxide processing conditions and surfactant tail length and branching. Well-ordered films with 2D hexagonal close-packed pore structure are obtained from sol-gel synthesis using the following cationic fluorinated surfactants as templates: 1-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-octyl)pyridinium chloride (HFOPC), 1-(3,3,4,4,5,5,6,6,7,8,8,8-dodecafluoro-7-trifluoromethyl -octyl)pyridinium chloride (HFDoMePC), and 1-(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluoro-decyl)pyridinium chloride (HFDePC). Processing the sol-gel film with CO2 (69-172 bar, 25 and 45 degrees C) immediately after coating results in significant increases in pore diameter relative to the unprocessed thin films (increasing from 20% to 80% depending on surfactant template and processing conditions). Pore expansion increases with CO2 processing pressure, surfactant tail length, and surfactant branching. The varying degree of CO2 induced expansion is attributed to the solvation of the "CO2-philic" fluorinated tail and is interpreted from interfacial behavior of HFOPC, HFDoMePC, and HFDePC at the CO2-water interface.     

Microtribological study of internal surfaces of fluorinated mesoporous silica films

Fluorinated mesoporous silica films were synthesized via sol-gel co-condensation and coated on glass substrates. Surfactant template concentrations were varied to examine the effect of encapsulated organic functionality on the microtribological properties of films using atomic force microscopy. Films were tested as synthesized and also after being abraded to expose interior mesostructured surfaces. Results indicate that templating allows fluorinated moieties to become encapsulated within the film, which affect the tribological properties of the exposed internal surfaces. Depending on the amount of template added, the interior surfaces were able to achieve a friction level comparable to that of conventional monolayers. The dependence of friction on sliding speed revealed that fluorinated templated films have tribological properties intermediate to those of a nonfunctional surface and a conventional fluorinated monolayer.     

Unusual dependence of particle architecture on surfactant concentration in partially fluorinated decylpyridinium templated silica

A series of porous silica particles is prepared with different concentrations of the fluorinated cationic surfactant 1-(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10)-heptadecafluorodecyl)pyridinium chloride (HFDePC) to trace the changes in pore structure and particle morphology as the surfactant concentration increases. At the lowest concentration studied (1.5 mmol/L), the product consists of small round particles with close-packed cylindrical mesopores. As the HFDePC concentration increases, macroporous voids are introduced to create multi-chambered hollow particles with mesoporous walls. With a still higher concentration of HFDePC the macropore volume decreases, and elongated, tactoid-like nanoparticles are formed with random mesh-phase pores oriented with silica layers perpendicular to the main axis of the particles. Further increasing the concentration of HFDePC eventually leads to the formation of round particles with disordered pores. These changes are consistent with increasing HFDePC concentration favoring increasingly oblate or disklike micelles. The process of forming the elongated particles with random mesh-phase structure is investigated by TEM of chilled and dried samples. The results indicate that the oriented tactoid-like structure forms spontaneously within 2 min by co-assembly of silica and HFDePC rather than by preferred growth perpendicular to the layers. The particle shape and layer orientation are consistent with what would be expected for a liquid-crystal particle with orientation-dependent surface tension. Finally, we compare samples prepared with a high HFDePC and with good or poor mixing. With inadequate mixing, a gel layer forms at the top of the sample which is composed of elongated mesoporous particles with a thick coating of microporous silica. The lower particulate phase contains small disordered particles similar to those obtained in a well-mixed sample. Presumably, the structure of the upper layer results from initial immiscibility of the precursor and slow diffusion of silicates out of the gel.     

Organo-modified mesoporous silica for sorption of carbon dioxide

Abstract  

Organo-modified mesoporous silica SBA-15 has been studied for sorption of carbon dioxide (CO₂). The SBA-15 sample was functionalized with a branched chain polymer, polyethylenimine (PEI), of different molecular weights (1,300 and 2,000 g mol⁻¹). Surface modification was carried out by impregnation of silica by PEI or by grafting with (3-chloropropyl)triethoxysilane, followed by substitution of chlorine atoms by PEI ligands. The prepared modified mesoporous materials were characterized by nitrogen adsorption/desorption at 77 K, high-resolution transmission electron microscopy, small-angle X-ray scattering, and thermal methods. Sorption of CO₂ was studied by gravimetric method at 303 K. The total amount of sorbed CO₂ varied between 0.19–0.67 mmol/g for respective samples. Regeneration of the materials after adsorption was achieved by thermal treatment at 343 K.     

A novel ordered cubic mesoporous silica templated with tri-head group quaternary ammonium surfactant

An ordered mesoporous silica with novel cubic structure (space group Fd3m) has been synthesized by using tri-head group quaternary ammonium surfactants [CmH2m + 1N+(CH3)2CH2CH2N+(CH3)2CH2CH2CH2N+(-)(CH3)(3).3Br-] (Cm-2-3-1, m = 14, 16, 18) as the structure-directing agents under basic conditions at low temperature.     

Thin films of bicontinuous cubic mesostructured silica templated by a nonionic surfactant

Thin films ofbicontinuous cubic mesostructured silica were formed using the nonionic poly(oxyethylene)-alkyl ether surfactant Brij-56 as a structure-directing agent. The synthesis conditions were chosen such that the estimated volume fraction of surfactant in the silica/surfactant films corresponded approximately to the composition at which the bicontinuous cubic phase occurs in the water/surfactant phase diagram. Small-angle X-ray scattering and transmission electron microscopy measurements reveal that the cubic phase corresponds to the Ia3(-)d double-gyroid structure, with some distortion due to anisotropic film shrinkage. The cubic structure grows as faceted domains that are well-oriented with respect to the substrate and often occur in coexistence with a lamellar phase. By adjusting the temperature at which the films are aged, it is possible to create films with 2D hexagonal, cubic, or lamellar structures at a single composition.     

Three-dimensional low symmetry mesoporous silica structures templated from tetra-headgroup rigid bolaform quaternary ammonium surfactant

Two kinds of highly ordered mesoporous silica materials (FDU-11, FDU-13) with novel three-dimensional (3-D) tetragonal and orthorhombic structures were synthesized by using tetra-headgroup rigid bolaform quaternary ammonium surfactant [(CH(3))(3)NCH(2)CH(2)CH(2)N(CH(3))(2)CH(2)(CH(2))(11)OC(6)H(4)C(6)H(4)O(CH(2))(11)CH(2)N(CH(3))(2)CH(2)CH(2)CH(2)N(CH(3))(3).4Br] (C(3-12-12)(-)(3)) as a template under alkaline conditions. High-resolution transmission electron microscopy (HRTEM), small-angle X-ray scattering (SAXS), and X-ray diffraction (XRD) show that mesoporous silica FDU-11 has primitive tetragonal P4/mmm structure with cell parameters a = b = 8.46 nm, c = 5.22 nm, and c/a ratio = 0.617. N(2) sorption isotherms show that calcined FDU-11 has a high BET surface area of approximately 1490 m(2)/g, a uniform pore size of approximately 2.72 nm, and a pore volume of approximately 1.88 cm(3)/g. Mesoporous silica FDU-13 has primitive orthorhombic Pmmm structure. The cell parameters are a = 9.81, b = 5.67, and c = 3.66 nm. N(2) sorption isotherms show that calcined FDU-13 has a high BET surface area of 1210 m(2)/g, a uniform mesopore size of approximately 1.76 nm, and a large pore volume of approximately 1.83 cm(3)/g. Such low symmetries for 3-D mesostructures (tetragonal and orthorhombic system) have not been observed before even in amphiphilic liquid crystals, which maybe resulted from an oblate aggregation of the bolaform surfactant and its strong electrostatic interaction with inorganic precursor. A probable mechanism has been proposed for the formation of such a 3-D low symmetrical mesostructure. These results will further extend the synthesis of mesoporous materials and may open up new opportunities for their new applications in catalysis, separation, and nanoscience.     

Phase behavior and preparation of mesoporous silica in aqueous mixtures of fluorinated surfactant and hydrophobic fluorinated polymer

The phase behavior and formation of self-assemblies in the ternary water/fluorinated surfactant (C(8)F(17)EO(10))/hydrophobic fluorinated polymer (C(3)F(6)O)(n)COOH system and the application of those assemblies in the preparation of mesostructured silica have been investigated by means of phase study, small angle X-ray scattering, and rheology. Hexagonal (H(1)), bicontinuous cubic (V(1)) with Ia3d symmetry, and polymer rich lamellar (L(alpha)(')) are observed in the ternary diagram. C(8)F(17)EO(10) molecules are dissolved in polymer rich aggregates, whereas (C(3)F(6)O)(n)COOH molecules are practically insoluble in the surfactant lamellar phase due to packing restrictions. Hence, two types of lamellar phases exist: one with surfactant rich (L(alpha)) and the other with polymer rich (L(alpha)(')) in the water/C(8)F(17)EO(10)/(C(3)F(6)O)(n)COOH system. As suggested by rheological measurements, worm-like micelles are present in C(8)F(17)EO(10) aqueous solutions but a rod-sphere transition takes place by solubilization of (C(3)F(6)O)(n)COOH. C(8)F(17)EO(10) acts as a structure directing agent for the preparation of hexagonal mesoporous silica by the precipitation method. The addition of (C(3)F(6)O)(n)COOH induces the formation of larger but disordered pores.     

Elemental distribution in fluorinated amorphous carbon thin films

Focused ion beam-secondary ion mass spectrometry (FIB-SIMS) with 20 nm spatial resolution has been used to analyze amorphous fluorinated carbon thin films, deposited by plasma assisted chemical vapor deposition (PACVD), at micro- to nano-scale. Mass spectra and ion imaging of film surface were acquired and the presence and distribution of contaminants were investigated. Surface images show the secondary ion distribution for F(-), CH(-), CF(-). A change in size and topology of fluorine-rich areas is correlated with film hardness and with microstructure transition from diamond-like to polymer-like, as indicated by infrared and Raman spectroscopies. Based on the surface distributions of CF(-) and CH(-) and on the vibrational spectroscopy results, a mechanism of fluorine substitution for hydrogen and an attempt to explain the film structure and microstructure is proposed.     

Fabrication and photoluminescent properties of ZnO/mesoporous silica composites templated by a chelating surfactant

A novel anionic surfactant-templated synthesis of ZnO/mesoporous silica nanocomposites has been carried out by using N-hexadecylethylenediamine triacetate (HED3A), a triprotic surfactant, as the structure-directing agent. The chelating template can capture zinc ions in solution and then direct the mesophase formation, enabling an amount of zinc oxide to be embedded in the porous silica matrix during calcination. With variation of the molar ratio of Zn(2+) to HED3A in the template, a series of composites with different doping amounts were obtained after the removal of organic components. The variation of the zinc ion concentration in the initial template solution induces an evolution of the silica mesophase, presumably due to the change in electronegativity of the HED3A headgroup caused by the chelating effect. Spectroscopic studies show a strong host-guest interaction between the silica pore walls and ultrafine ZnO nanoparticles. The photoluminescence properties of the resulting composites exhibit a size-dependent light emission and quantum-confinement effect of ZnO, accompanied by an infrequent violet emission originating from the ZnO-SiO(2) interface.     

Preparation and characterization of mesoporous silica thin films from polyethoxysiloxanes

Tetraethoxysilane (TEOS) and polyethoxysiloxanes (PEOSs; prepared by the acid‐catalyzed hydrolytic polycondensation of TEOS) were subjected to the sol–gel process in the presence of cetyltrimethylammonium bromide (CTAB), respectively. The PEOSs with M_w 700–26,000, as prepared by sol–gel coating of TEOS and PEOS under various conditions, were used. Uniform and crack‐free thin films of thickness 276–613 nm were prepared by spin‐coating of a PEOS solution containing CTAB. When the coating films were sintered at 400 °C, the combustion of ethoxy groups and CTAB took place to provide porous silica thin films. The structure of the thin films was found to be dependent on the molecular weight of PEOS and the molar ratio of CTAB/Si: lamellar or hexagonal phase was observed for M_w less than 15,000 and for CTAB/Si molar ratios greater than 0.10. Honeycomb structures were observed for M_w less than 5000 and for CTAB/Si molar ratios of 0.15. The honeycomb structure was also observed by atomic force microscopy and transmission electron microscope. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2542–2550, 2006     

Modeling carbon dioxide adsorption on polyethylenimine-functionalized TUD-1 mesoporous silica

Samples of porous, foam-like TUD (Technische Universit?t Delft)-1 mesoporous silica were functionalized with polyethylenimine and were used as a substrate for CO(2) adsorption. Produced solids were characterized by means of electron microscopy, thermogravimetric analysis, and N(2) adsorption/desorption at 77K, in order to prove that polymer chains efficiently filled the pores of functionalized samples. CO(2) adsorption isotherms on polyethylenimine-containing TUD-1 were evaluated at T=298, 313, 328, and 348 K for pressures up to 100 kPa by means of a volumetric technique. The CO(2) adsorption capacity proved to be significantly dependent on temperature, with the highest capacity encountered at T=348 K. The experimental data for CO(2) adsorption were satisfactorily described by means of the Langmuir isotherm, and the dependence of the isosteric heat on the fractional coverage of the adsorbent was evaluated by means of the van't Hoff equation, showing values in the order of 80 kJ/mol for a fractional coverage of about 50%.     

Assessment of the intrinsic interactions of mesoporous silica with carbon dioxide

Three mesoporous silica, SBA-16, SBA-15 and MCM-41, with different structures and porosities were synthesized via a hydrothermal method and their interactions with carbon dioxide (CO₂) were investigated through thermal programmed desorption (TPD) and differential scanning calorimetry. TPD measurements provided precise assessments of the intrinsic affinity towards CO₂, without the influence of moisture. All silica materials were found to exhibit intrinsic affinity towards carbon dioxide, but the surface basicity, expressed in terms of retained CO₂ amount, is markedly influenced by increases in pore size and framework structures. SBA-15 displayed the highest CRC values, explained in terms of larger pore size, lower numbers of acidic out-of plane Si–OH and higher numbers of much less acidic in-plane silanols. These findings provide valuable information for a better understanding of the role of the silica structure in the intrinsic basicity, prior to further modifications for improving the affinity towards CO₂ or merely for catalysis purposes involving CO₂ as reagents, intermediates or products.     

Single molecule spectroscopy studies of diffusion in mesoporous silica thin films

Single molecule spectroscopy is applied in studies of diffusion and surface adsorption in sol-gel-derived mesoporous silica thin films. Mesoporous films are obtained by spin casting surfactant-templated sols onto glass substrates. Small-angle X-ray diffraction results are consistent with hexagonally ordered mesophases in as-synthesized (i.e., surfactant-containing) films. Upon calcination, a 30% contraction and disordering of these structures occurs. Nile Red is used as a fluorescent probe of both the as-synthesized and calcined films. It is loaded into the samples at subnanomolar levels either prior to spin casting or after calcination. Fluorescence imaging and single-point fluorescence time transients show the dye molecules to be relatively mobile in the as-synthesized samples. In contrast, the molecules appear entrapped at fixed locations in dry calcined films. In calcined films rehydrated under high humidity conditions, the Nile Red molecules again become mobile. Time transients obtained from the as-synthesized and rehydrated samples provide clear evidence for frequent reversible adsorption of the dye to the silica surfaces. Autocorrelations of the time transients provide quantitative data on the mean diffusion coefficients (D = 2.4 x 10(-10) and 2.6 x 10(-10) cm2/s) and mean desorption times (1/k = 25 and 40 s) for the as-synthesized and rehydrated films, respectively. The results prove both water and surfactant play important roles in governing matrix interactions and mass transport.     

Chiral nematic assemblies of silver nanoparticles in mesoporous silica thin films

Silver nanoparticles (NPs) have been synthesized inside mesoporous silica films with chiral nematic structure. Circular dichroism measurements of the silver NP-loaded silica films show NP-based optical activity in the vicinity of the surface plasmon resonance. These materials, with an optical response associated with the chiral assembly of metal NPs, may be useful for developing new sensors.     

Fabrication of mesoporous metal chalcogenide nanoflake silica thin films and spongy mesoporous CdS and CdSe

Mesoporous silica metal oxide (ZnO and CdO) thin films have been used as metal ion precursors to produce the first examples of mesoporous silica metal sulfide (meso-SiO(2) @ZnS, meso-SiO(2) @CdS) or silica metal selenide (meso-SiO(2) @ZnSe, meso-SiO(2) @CdSe) thin films, in which the pore walls are made up of silica and metal sulfide or metal selenide nanoflakes, respectively. A gentle chemical etching with a dilute HF solution of the meso-SiO(2) @CdS (or meso-SiO(2) @CdSe) produces mesoporous cadmium sulfide (meso-CdS) (or cadmium selenide, meso-CdSe). Surface modified meso-CdS displays bright blue photoluminescence upon excitation with a UV light. The mesoporous silica metal oxides are formed as metal oxide nanoislands over the silica walls through a self-assembly process of a mixture of metal nitrate salt-two surfactants-silica source followed by calcination step. The reactions, between the H(2) S (or H(2) Se) gas and solid precursors, have been carried out at room temperature and monitored using spectroscopy and microscopy techniques. It has been found that these reactions are: 1)?taking place through the diffusion of sulfur or selenium species from the top metal oxide layer to the silica metal oxide interface and 2)?slow and can be stopped at any stage to obtain mesoporous silica metal oxide metal sulfide or silica metal oxide metal selenide intermediate thin films.     

Evaporation induced self-assembly of templated silica and organosilica thin films on various electrode surfaces

A new one-step method is reported for the deposition of hybrid mesoporous thin films on various electrode surfaces (gold, platinum, glassy carbon). Deposition was achieved by spin-coating sol–gel mixtures in the presence of a surfactant template to get mesostructured thin layers on the various conducting substrates. Film formation occurred by evaporation induced self-assembly (EISA) involving the hydrolysis and (co)condensation of silane and/or organosilane precursors on the electrode surface. Extraction of the surfactant from the ordered mesoporous films led to a large increase of mass transport rates into the materials and imparted high accessibility to the organic moieties in case of functionalized mesoporous overlayers. The electrochemical properties of the film-modified electrodes have been studied by cyclic voltammetry (CV), and also via the chemical accumulation of mercury ions prior to their stripping analysis by differential pulse voltammetry (i.e. for thiol-functionalized thin films). Some evidences to support the formation of self-assembled monolayers (SAMs) on electrodes, have been also discussed. The formation of well-adhering mesoporous thin films on solid electrode surfaces is expected to have a high impact on the development of new electrochemical sensors.     

Deposition of thin mesoporous silica films on glass substrates from basic solution

Transparent thin (ca. 100 nm) films of silica-surfactant mesostructured materials were deposited on borosilicate glass plates and soda-lime glass tubes from aqueous solutions containing tetraethoxysilane, alkyltrimethylammonium chloride, ammonia, and methanol. By calcination in air, the films became mesoporous (BET surface area of 700-900 m2 g-1) with pore diameter 2.0-2.8 nm.