FTIR and ultrasonic investigations on modified bismuth borate glasses

Studies on xRO · 30Bi₂O₃ · (70−x)B₂O₃ glasses have been carried out (0 ? x ? 30 mol%, R = Zn, Ba). Elastic properties and Debye temperature have been investigated using sound velocity measurements at 4 MHz. The ultrasonic parameters along with the IR spectroscopic studies have been employed to explore the role of divalent cations in the structure of the studied glasses. Analysis of infrared spectra indicates that RO is preferentially incorporated into the borate network, forming BO₄ units. It is assumed that Bi₂O₃ enters the structure in the form of BiO₆ only. The change of density and molar volume with RO content reveals that BO₄ units linked to R²⁺ cations are denser than those linked to positive sites in the Bi₂O₃ network. Predicted values of four co-ordinated boron put forward questions about the reliability of assignment of structural units that Bi₂O₃ may form.     

The effect of composition on UV-vis-NIR spectra of iron doped glasses in the systems Na2O/MgO/SiO2 and Na2O/MgO/Al2O3/SiO2

Glasses with the compositions xNa₂O · 10MgO · (90 − x)SiO₂, 10Na₂O · xMgO · (90 − x)SiO₂, 5Na₂O · 15MgO · xAl₂O₃ · (80 − x)SiO₂, xNa₂O · 10MgO · 10Al₂O₃ · (80 − x)SiO₂, 10Na₂O · 10MgO · xAl₂O₃ · (80 − x)SiO₂, 10Na₂O · 5MgO · 10Al₂O₃ · (80 − x)SiO₂ were melted and studied using UV-vis-NIR spectroscopy in the wavenumber range from 5000 to 30 000 cm⁻¹. At [Al₂O₃] > [Na₂O], the UV-cut off is strongly shifted to smaller wavenumbers and the NIR peak at around 10 000 cm⁻¹ attributed to Fe²⁺ in sixfold coordination gets narrower. Furthermore, the intensity of the NIR peak at 5500 cm⁻¹ increases. This is explained by the incorporation of iron in the respective glass structures.     

Bioactive glasses in the system CaO-B2O3-P2O5: Preparation, structural study and in vitro evaluation

Glasses in the system x B₂O₃(1 − x) [y CaO P₂O₅], (x = 0, 0.1, 0.2, 0.3, y = 2, 2.6, 3, 4, 5) have been prepared by fast quenching of high temperature melts. The presence of B₂O₃ affected the glass forming ability, allowing the preparation of calcium phosphate glasses with y ? 2.6. The structure of glasses was analyzed by μ-Raman and infrared spectroscopy. The analysis indicated that the glass network is dominated by highly charged species from phosphate tetrahedra with 3 (pyro) or 4 (ortho) NBOs, while the boron atoms are incorporated mainly in 3 coordinated sites in the form of B∅₃ or B∅₂O⁻ units. A small fraction of units was also evident from the spectra analysis of glasses with high CaO content. All calcium borophosphate glasses exhibited bioactivity after soaking in SBF solution within a few days. This was observed by μ-Raman and SEM microscopy, while XRD patterns clearly revealed growth of hydroxyapatite phase. The presence of boron in the glass network has a catalytic effect at favoring bioactivity of the otherwise bioinert calcium phosphate glasses.     

Structural analysis and devitrification of glasses based on the CaO-MgO-SiO2 system with B2O3, Na2O, CaF2 and P2O5 additives

Glasses, whose basic composition was based on the CaO-MgO-SiO₂ system and doped with B₂O₃, P₂O₅, Na₂O, and CaF₂, were prepared by melting at 1400 °C for 1 h. Raman and infrared (IR) spectroscopy revealed that the main structural units in the glass network were predominantly Q¹ and Q² silicate species. The presence of phosphate and borate units in the structure of the glasses was also evident in these spectra. X-ray analysis showed that the investigated glasses devitrified at 750 °C and higher temperatures. The crystalline phases of diopside and wollastonite dominated, but weak peaks, assigned to akermanite and fluorapatite, were also registered in the diffractograms. The presence of B₂O₃, Na₂O, and CaF₂ had a negligible influence on the assemblage of the crystallized phases, but it caused a reduction of crystallization temperature, comparing to similar glasses of the CaO-MgO-SiO₂ system.     

Elastic properties and structural studies on lead-boro-vanadate glasses

This paper describes elastic properties and spectroscopic studies on the xPbO-50B₂O₃-(50 - x)V₂O₅ (where x = 20, 25, 30, 35, 40, 45 and 49 mol%) glass system. Elastic moduli and spectroscopic parameters exhibit compositional dependent trends and the existence of characteristic borovanadate groups in these glasses. The bulk modulus and shear modulus increase with the concentration of [BO_4/2]⁻ and [B₂V₂O₉]²⁻ groups, which increases the dimensionality of the network. The scheme of modification of borate and vanadate groups has been explained by considering the Sanderson’s electronegativity principle. Analysis of infrared(IR) and magic angle spinning-nuclear magnetic resonance (MAS-NMR) spectra suggests the presence of characteristic diborovanadate groups also in these glasses. The results are examined in view of the structural groups formed due to the presence of PbO as a modifier.     

Structural investigation of bismuth borate glasses and crystalline phases

Glasses of the system: xBi₂O₃-(100−x)B₂O₃ (x = 20 to 66 mol%) were prepared and characterized by density, DSC, UV-visible absorption and ¹¹B MAS-NMR spectroscopy. Glass molar volume increases while the glass transition temperature decreases with Bi₂O₃ concentration. Densities of some bismuth borate glasses are found to be greater or very close to those of single crystal phases with equal composition. B¹¹ MAS-NMR studies determined that the fraction of tetrahedrally coordinated borons (N₄) is maximum at 42 mol% of Bi₂O₃ and that there is a local maxima in N₄ at Bi₂O₃ concentration of 50 mol%. Glasses containing Bi₂O₃ concentration of 33 mol% and higher show an unusual, intense absorption band just below the optical band gap. Two crystalline phases: Bi₃B₅O₁₂ and Bi₄B₂O₉ were prepared by devitrification of glasses and characterized by X-ray diffraction, FTIR and ¹¹B MAS-NMR studies. Both crystalline phases contained significantly lower N₄ than glasses with equal composition.     

Thermal properties and crystallization of iron phosphate glasses containing up to 25 wt% additions of Si-, Al-, Na- and U-oxides

The thermal properties (expansion, T_g and T_SOFT.) of glasses, having 56-66% P₂O₅, 14.8-34.2% Fe₂O₃ and 2-25 wt% additions of SiO₂, Al₂O₃, Na₂O and UO₂, were comparatively estimated from dilatometric measurements in similar conditions. The T_g reversibility was clearly verified by varying the heating rates between 1 and 5 °C min⁻¹. From linear equations fits of the various glass properties as functions of the six components it is suggested the iron, sodium and uranium oxides decrease the thermal expansion (for 50 < T ? 300 °C), T_g and T_SOFT. From DTA/XRD analysis of three glasses it was confirmed the crystallization tendency decreased with increasing the UO₂ level in the glasses. Leaching test data for two compositions containing Na₂O suggest addition of UO₂ increases the chemical durability of the related glass. The roles of UO₂, Na₂O and Fe-oxide species as structural components of the glass network are discussed.     

Electron spin resonance and magnetic studies on CaO-SiO2-P2O5-Na2O-Fe2O3 glasses

Room temperature electron spin resonance (ESR) spectra and temperature dependent magnetic susceptibility measurements have been performed to investigate the effect of iron ions in 41CaO · (52 − x)SiO₂ · 4P₂O₅ · xFe₂O₃ · 3Na₂O (2 ? x ? 10 mol%) glasses. The ESR spectra of the glass exhibited the absorptions centered at g ≈ 2.1 and g ≈ 4.3. The variation of the intensity and linewidth of these absorption lines with composition has been interpreted in terms of variation in the concentration of the Fe²⁺ and Fe³⁺ in the glass and the interaction between the iron ions. The magnetic susceptibility data were used to obtain information on the relative concentration and interaction between the iron ions in the glass.     

The effect of alumina on the Sn/Sn redox equilibrium and the incorporation of tin in Na2O/Al2O3/SiO2 melts

Glasses with the basic compositions 10Na₂O · 10CaO · xAl₂O₃ · (80 − x)SiO₂ (x=0, 5, 15, 25) and 16Na₂O · 10CaO · xAl₂O₃ · (74 − x)SiO₂ (x=0, 5, 10, 15, 20) doped with 0.25-0.5 mol% SnO₂ were studied using square-wave-voltammetry at temperatures in the range from 1000 to 1600 °C. The voltammograms exhibit a maximum which increases linearly with increasing temperature. With increasing alumina concentration and decreasing Na₂O concentration the peak potentials get more negative. Mössbauer spectra showed two signals attributed to Sn²⁺ and Sn⁴⁺. Increasing alumina concentrations did not affect the isomer shift of Sn²⁺; however, they led to increasing quadrupole splitting, while in the case of Sn⁴⁺ both isomer shift and quadrupole splitting increased. A structural model is proposed which explains the effect of the composition on both the peak potentials and the Mössbauer parameters.     

Devitrification behavior and structure of Li2O-B2O3-Al2O3 composite gels from metal alkoxides

(30 − x/2)Li₂O·(70 − x/2)B₂O₃·xAl₂O₃(x = 0, 5 and 10) composite gels have been fabricated by the sol-gel method. LiOCH₃, B(OC₄H₉)₃, and Al(OC₄H₉)₃ were used as precursor for Li₂O, B₂O₃, and Al₂O₃, respectively. B(OC₄H₉)₃ and Al(OC₄H₉)₃ were hydrolyzed separately and then mixed. The crystallization behavior and structure of the gels upon thermal treatment temperatures between 150 and 550 °C are characterized on the basis of SEM, XRD and IR analyses. Xerogel with x = 0 exhibits non-crystal features, whereas crystalline phases are found in the xerogels with x = 5 and 10. The crystalline phases are not found with increasing heat treatment temperatures from 150 to 450 °C, but crystalline phases appear present at 550 °C. The xerogel with x = 0, subject to thermal treatment below 450 °C, is found to be still amorphous, and a 550 °C heat treatment leads its structure changing from glassy to crystalline.     

Nuclear magnetic resonance studies of the glasses in the system K2OB2O3P2O5

B¹¹ NMR spectra have been used to study the structure of glasses in the system K₂OB₂O₃P₂O₅. The results indicate that the glasses do not contain an appreciable number of boron atoms in BO₃ units with one or two non-bridging oxygens. The fraction N₄ of boron atoms in BO₄ units is measured and analyzed according to a structural model containing the following elements. (1) If the binary borophosphate system forms glasses, they consist of a borophosphate (BPO₄) network and a borate network for K<1, or a borophosphate (BPO₄) network and a phosphate network for K>1, where K = mol.% P₂O₅/mol.% B₂O₃. (2) The conversion rates of BO₄ units (i.e. the rate of production or destruction by added oxygens) in the borate network and the borophosphate (BPO₄) network are given as (+2) and (?0.38), respectively. (3) K⁺¹ ions are proportionally shared between the two networks; (i.e. between the borate and borophosphate (BPO₄) networks for K<1, and between the phosphate and borophosphate (BPO₄) networks for K>1).     

Structure and electrical conductivity of new Li2O-CeO2-B2O3 glasses

Fourier transformation infrared spectra, density and DC electrical conductivity of 30Li₂O · xCeO₂⋅(70 − x)B₂O₃ glasses, where x ranged between 0 and 15 mol%, have been investigated. The results suggested that CeO₂ plays the role of network modifier up to 7.5 mol%. At higher concentrations it plays a dual role; where most of ceria plays the role of network former. The density was observed to increase with increasing CeO₂ content. The effect on density of the oxides in the glasses investigated is in the succession: B₂O₃ < Li₂O < CeO₂. Most of CeO₂ content was found to be associated with B₂O₃ network to convert BO₃ into B O₄⁻ units. The contribution of Li⁺ ions in the conduction process is much more than that due to small polarons. The conductivity of the glasses is mostly controlled by the Li⁺ ions concentration rather than the activation energy for CeO₂ > 5 mol%. Lower than 5 mol% CeO₂ the conductivity is controlled by both factors. The dependence of W on BO₄⁻ content supports the idea of ionic conduction in these glasses.     

Thermal stability, spectra and laser properties of Yb: lead-zinc-telluride oxide glasses

A series of new glasses of 70TeO₂-(20 − x) ZnO-xPbO − 5La₂O₃-2.5K₂O-2.5Na₂O (mol%) doped with Yb³⁺ is presented. Thermal stability, spectra and laser properties of Yb³⁺ ions have been measured. It found that 70TeO₂-15PbO-5ZnO-5La₂O₃-2.5K₂O-2.5Na₂O composition glass had fine stability ((T_x−T_g)>190 °C), high-stimulated emission cross-section of 1.25 pm² for the ²F_5/2 → ²F_7/2 transition and existed measured fluorescence lifetime of 0.94 ms and the broad fluorescence effective linewidth of 72 nm. Evaluated from the good potential laser parameters, this system glass is excellent for short pulse generation in diode pumped lasers, short pulse generation tunable lasers, high-peak power and high-average power lasers.     

Deep-UV Raman spectroscopic analysis of structure and dissolution rates of silica-rich sodium borosilicate glasses

As part of ongoing studies to evaluate relationships between structure and rates of dissolution of silicate glasses in aqueous media, sodium borosilicate glasses of composition Na₂O·xB₂O₃·(3 − x)SiO₂, with x ≤ 1 (Na₂O/B₂O₃ ratio ≥ 1), were analyzed using deep-UV Raman spectroscopy. Results were quantified in terms of the fraction of SiO₄ tetrahedra with one non-bridging oxygen (Q³) and then correlated with Na₂O and B₂O₃ content. The Q³ fraction was found to increase with increasing Na₂O content, in agreement with studies on related glasses, and, as long as the value of x was not too high, this contributed to higher rates of dissolution in single pass flow-through testing. In contrast, dissolution rates were less strongly determined by the Q³ fraction when the value of x was near unity, and appeared to grow larger upon further reduction of the Q³ fraction. Results were interpreted to indicate the increasingly important role of network hydrolysis in the glass dissolution mechanism as the BO₄ tetrahedron replaces the Q³ unit as the charge-compensating structure for Na⁺ ions. Finally, the use of deep-UV Raman spectroscopy was found to be advantageous in studying finely powdered glasses in cases where visible Raman spectroscopy suffered from weak Raman scattering and fluorescence interference.     

A multinuclear NMR study of sodium-borovanadophosphate glasses

xNaVO₃ · yNaPO₃ · (1 − y)NaBO₂ glasses were prepared where x = 0.0, 0.05, 0.5 and 0 ? y ? 1. These glasses have been investigated with multinuclear MAS NMR. ⁵¹V NMR spectra show that two vanadate configurations are possible, assigned as four and five coordinated vanadium. The concentration of the latter group decreases upon addition of sodium-borate. The presence of four and three coordinated boron sites can be deduced from the ¹¹B NMR spectra. The latter boron sites appear only when borate groups are connected to each other. ³¹P NMR spectra of borophosphates and borovanadophosphates show that the ratio of pyro- and metaphosphates is greater in the glasses containing vanadate than in simple borophosphates. These results indicate phosphate to be the most acidic agent and therefore the best chain-terminating group in these glasses.     

The glass transition temperature and infrared absorption spectra of: (70−x)TeO2 + 15B2O3 + 15P2O5 + xLi2O glasses

Glasses of the system: (70−x) TeO₂ + 15B₂O₃ + 15P₂O₅ + xLi₂O, where x = 5, 10, 15, 20, 25 and 30 mol% were prepared by melt quench technique. Dependencies of their glass transition temperatures (T_g) and infrared (IR) absorption spectra on composition were investigated. It is found that the gradual replacement of oxides, TeO₂ by Li₂O, decreases the glass transition temperature and increases the fragility of the glasses. Also, IR spectra revealed broad weak and strong absorption bands in the investigated range of wave numbers from 4000 to 400 cm⁻¹. These bands were assigned to their corresponding bond modes of vibration with relation to the glass structure.     

Thermo-optic properties of B2O3 doped Li2O-Al2O3-SiO2 glass-ceramics

Reduction in the temperature coefficient of the optical path length, dS/dT of Li₂O-Al₂O₃-SiO₂ glass-ceramics with near-zero thermal expansion coefficient was attempted using control of the temperature coefficient of electronic polarizability, ?, and the thermal expansion coefficient, α. The dS/dT value of 2.6 mol% B₂O₃-doped glass-ceramic was 12.5  × 10⁻⁶/°C, which was 0.9 ×  10⁻⁶/°C smaller than that of B₂O₃-free glass-ceramic. On the other hand, reduction in dS/dT through B₂O₃ doping was not confirmed in precursor glasses. Results showed that reduction in dS/dT of the glass-ceramic through B₂O₃ doping is caused by the reduction in ?. The reduction in ? from B₂O₃ doping was probably attributable to numerical reduction in non-bridging oxide ions with larger ? value by the concentration of boron ions in the residual glass phase. In addition, application of hydrostatic pressure during crystallization was effective to inhibit precipitation of β-spodumene solid solution, which thereby decreases dS/dT. The dS/dT value of B₂O₃-doped glass-ceramic crystallized under 196 MPa was 11.7 ×  10⁻⁶/°C. That value was slightly larger than that of silica glass. The α value of this glass-ceramic was smaller than that of silica glass.     

Dielectric properties and structural features of barium-iron phosphate glasses

The dielectric constant of barium-iron phosphate glasses with the general composition (40−x)BaO · xFe₂O₃ · (60−x)P₂O₅ has been investigated at two fixed frequencies (100 kHz and 9.0 GHz). The dielectric constant measured using microwave technique, and the ratio O/P of these glasses increase with increasing Fe₂O₃ content. The structure and valence states of the iron ions in these glasses were investigated using Mössbauer spectroscopy, infrared spectroscopy and differential thermal analysis. Both Fe(II) and Fe(III) ions present in these glasses in octahedral coordination act as permanent dipoles, and the increase of the iron concentration increase these permanent dipoles, contributing to the dielectric constant.     

Theoretical studies of the spin Hamiltonian parameters and the local structures for the tetragonal Cu centers in the LKB glasses

The spin Hamiltonian parameters (g factors g_∥, g_⊥ and the hyperfine structure constants A_∥, A_⊥) for the Cu²⁺ centers in the lithium potassium borate (LKB) glasses xLi₂O·(30 − x)·K₂O·70B₂O₃ (0 ≤ x ≤ 25) were theoretically studied using the high-order perturbation formulas of these parameters for a 3d⁹ ion in a tetragonally elongated octahedron. The [CuO₆]¹⁰⁻ clusters in the LKB glasses are found to suffer the relative elongations of about 3% along the tetragonal axis due to the Jahn-Teller effect. The concentration dependences of the g factors are illustrated by the approximately linear decrease of the cubic field parameter Dq as well as the increases of the covalency factor N and the relative elongation ratio ρ due to the slight expansion of the cell volume or bond lengths with increasing the Li₂O concentration x. Meanwhile, the slow non-linear increases of the hyperfine structure constants are described as the rough exponential increase of the core polarization constant κ with x due to the increase of the tetragonality of the systems. The theoretical spin Hamiltonian parameters and their concentration dependences show good agreement with the experimental data. To evaluate validity and applicability of the present theoretical model and formulas, the EPR results of the Cu²⁺ centers in similar lithium sodium borate (LNB) xLi₂O·(30 − x)·Na₂O·70B₂O₃ (5 ≤ x ≤ 25 mol%) glasses are also analyzed and compared with those in the LKB systems using the uniform model and formulas.