High field electrical switching behavior of Ge10Se90−xTlx glasses

Electrical switching studies on bulk Ge₁₀Se_90−xTl_x (15 ? x ? 34) glasses have been undertaken to examine the type of switching, composition and thickness dependence of switching voltages. Unlike Ge-Se-Tl thin films which exhibit memory switching, the bulk Ge₁₀Se_90−xTl_x glasses are found to exhibit threshold type switching with fluctuations seen in their current-voltage (I-V) characteristics. Further, it is observed that the switching voltages (V_T) of Ge₁₀Se_90−xTl_x glasses decrease with the increase in the Tl concentration. An effort has been made to understand the observed composition dependence on the basis of nature of bonding of Tl atoms and a decrease in the chemical disorder with composition. In addition, the network connectivity and metallicity factors also contribute for the observed decrease in the switching voltages of Ge₁₀Se_90−xTl_x glasses with Tl addition. It is also interesting to note that the composition dependence of switching voltages of Ge₁₀Se_90−xTl_x glasses exhibit a small cusp around the composition x = 22, which is understood on the basis of a thermally reversing window in this system in the composition range 22 ? x ? 30. The thickness dependence of switching voltages has been found to provide an insight about the type of switching mechanism involved in these samples.     

Thermal diffusivity measurements on As-Te-Ga glasses by photo-thermal deflection technique: Composition dependence and topological thresholds

The thermal diffusivity (α) of As₂₀Te_80−xGa_x glasses (7.5 ? x ? 18.5) has been measured using photo-thermal deflection (PTD) technique. It is found that the thermal diffusivity is comparatively lower for As₂₀Te_80−xGa_x glasses, which is consistent with the memory type of electrical switching exhibited by these samples. Further, the thermal diffusivity of As₂₀Te_80−xGa_x glasses is found to increase with the incorporation of gallium initially (for x ? 9), which is consistent with the metallicity of the additive. This increase in α results in a maximum at the composition x = 9; beyond x = 9, a decrease is seen in α leading to a minimum at the composition x = 15. The observed composition dependence of thermal diffusivity of As₂₀Te_80−xGa_x glasses has been found to be similar to that of Al₂₀As_xTe_100−x glasses, based on which it is proposed that As₂₀Te_80−xGa_x glasses exhibit an extended stiffness transition with compositions x = 9 and x = 15 being its onset and completion, respectively. Also, the composition x = 17.5 at which a second maximum is seen in the thermal diffusivity has been identified to be the chemical threshold (CT) of the As₂₀Te_80−xGa_x glassy system, as at CT, the glass is configurationally closest to the crystalline state and the scattering of the diffusing thermal waves is minimal for the chemically ordered phase.     

A sharp thermally reversing window in As45Te55−xIx chalcohalide glasses revealed by alternating differential scanning calorimetry and photo thermal deflection studies

The composition dependence of different thermal parameters such as glass transition temperature, non-reversing enthalpy, thermal diffusivity etc., of bulk As₄₅Te_55−xI_x chalcohalide glasses (3 ? x ? 10), has been evaluated using the temperature modulated Alternating Differential Scanning Calorimetry (ADSC) and Photo Thermal Deflection (PTD) studies. It is found that there is not much variation in the glass transition temperature of As₄₅Te_55−xI_x glasses, even though there is a wide variation in the average coordination number . This observation has been understood on the basis that the variation in glass transition temperature of network glasses is dictated by the variation in average bond energy rather than . Further, it is found that both the non-reversing enthalpy (ΔH_nr) and the thermal diffusivity (α) exhibit a sharp minimum at a composition x = 6. A broad hump is also seen in glass transition and crystallization temperatures in the composition range 5 ? x ? 7. The results obtained clearly indicate a sharp thermally reversing window in As₄₅Te_55−xI_x chalcohalide glasses around the composition x = 6.     

Signatures of an extended rigidity percolation in the photo-degradation behavior and the composition dependence of photo-response of Ge-Te-In glasses

Time dependent photocurrent measurements have been undertaken on bulk Ge₁₅Te_85−xIn_x (1 ? x ? 11) series of glasses. It is found that samples with x < 3 do not exhibit any photo-degradation whereas a decrease in photo-conductivity under illumination is observed in samples with x ? 3. Further, the photosensitivity of Ge₁₅Te_85−xIn_x glasses is found to reveal specific signatures at compositions x = 3 and 7. The observed composition dependent photo-degradation behavior and photo-response of these glasses have been understood on the basis of an extended rigidity percolation and its influence on network related properties.     

Effect of antimony addition on the thermal and electrical-switching behavior of bulk Se-Te glasses

The thermal properties and electrical-switching behavior of semiconducting chalcogenide Sb_xSe_55−xTe₄₅ (2 ? x ? 9) glasses have been investigated by alternating differential scanning calorimetry and electrical-switching experiments, respectively. The addition of Sb is found to enhance the glass forming tendency and stability as revealed by the decrease in non-reversing enthalpy ΔH_nr, and an increase in the glass-transition width ΔT_g. Further, the glass-transition temperature of Sb_xSe_55−xTe₄₅ glasses, which is a measure of network connectivity, exhibits a subtle increase, suggesting a meager network growth with the addition of Sb. The crystallization temperature is also observed to increase with Sb content. The Sb_xSe_55−xTe₄₅ glasses (2 ? x ? 9) are found to exhibit memory type of electrical switching, which can be attributed to the polymeric nature of network and high devitrifying ability. The metallicity factor has been found to dominate over the network connectivity and rigidity in the compositional dependence of switching voltage, which shows a profound decrease with the addition of Sb.     

Electrical switching studies on Ge-Te-Tl chalcogenide glasses: Effect of thallium on the composition dependence of switching voltages

Bulk Ge₁₇Te_83−xTl_x glasses (0 ≤ x ≤ 13), have been found to exhibit memory type electrical switching. The switching voltages (also known as threshold voltage — V_th) of Ge₁₇Te_83−xTl_x glasses are found to decrease with increasing thallium content. The rate of decrease of V_th is greater at lower concentrations and V_th falls at a slower rate for higher thallium concentrations (x ≥ 6).The addition of thallium to the Ge-Te network fragments the covalent network and introduces ionic nature to it; the reduction in network connectivity leads to the decrease in switching voltages with thallium content. The decrease in the glass transition temperatures of Ge₁₇Te_83−xTl_x glasses with increasing thallium concentration supports the idea of decrease in network connectivity with Tl addition. The more metallic nature of Tl also contributes to the observed reduction in the switching voltages of Ge₁₇Te_83−xTl_x glasses with Tl content.Further, there is an interesting correlation seen between the threshold voltage V_th and the average bond energy, as a function of Tl content. In addition, the switching voltages of Ge₁₇Te_83−xTl_x glasses have been found to decrease with sample thickness almost linearly. The set-reset studies indicate that the Ge₁₇Te₈₁Tl₂ sample can be switched for more than 10 cycles, whereas other glasses could not be reset beyond two switching cycles.     

Electrical switching in As-Te-Ag system-composition and temperature dependence

The current-voltage characteristics related to switching phenomena in silver doped arsenic telluride glasses, As₂₀Te_80−xAg_x and As₄₀Te_60−xAg_x, have been investigated over a wide composition range (4?x?14). The samples are found to show threshold switching behavior with the number of switching cycles withstood by the samples depending on the ON state current. The switching voltages are found to decrease with increase in silver content and a sharp minimum is seen at the composition x=12 for the As₂₀Te_80−xAg_x glasses and x=11 for the As₄₀Te_60−xAg_x glasses. An effort has been made to understand the observed composition dependence on the basis of increase in the conductance of the samples with silver addition and local structural effects.     

Electrical switching and thermal studies on bulk Ge-Te-Bi glasses

Bulk, melt quenched Ge₁₈Te_82-xBi_x glasses (1 ≤ x ≤ 4) have been found to exhibit memory type electrical switching behavior, which is in agreement with the lower thermal diffusivity values of Ge-Te-Bi samples. A linear variation in switching voltages (V_th) has been found in these samples with increase in thickness which is consistent with the memory type electrical switching. Also, the switching voltages have been found to decrease with an increase in temperature which happens due to the decrease in the activation energy for crystallization at higher temperatures. Further, V_th of Ge₁₈Te_82-xBi_x glasses have been found to decrease with the increase in Bi content, indicating that in the Ge-Te-Bi system, the resistivity of the additive has a stronger role to play in the composition dependence of V_th, in comparison with the network connectivity and rigidity factors. In addition, the composition dependence of crystallization activation energy has been found to show a decrease with an increase in Bi content, which is consistent with the observed decrease in the switching voltages. X-ray diffraction studies on thermally crystallized samples reveal the presence of hexagonal Te, GeTe, Bi₂Te₃ phases, suggesting that bismuth is not taking part in network formation to a greater extent, as reflected in the variation of switching voltages with the addition of Bi. SEM studies on switched and un-switched regions of Ge-Te-Bi samples indicate that there are morphological changes in the switched region, which can be attributed to the formation of the crystalline channel between two electrodes during switching.     

Structure and dynamics of liquid Al1−xSix alloys by ab initio molecular dynamics simulations

First-principles molecular dynamics (MD) simulations are performed to study the structure and dynamics of liquid Al_1−xSi_x (x = 0.0, 0.12, 0.2, 0.4, 0.6, 0.8) at the temperature of 1573 K. The composition dependence of static structure factors, pair correlation functions, and diffusion constants are investigated. We found that the structure of the liquid Al_1−xSi_x alloys is strongly dependent on the composition. From our simulation and analysis, we can see that although liquid Al_1−xSi_x is metallic, there are some degrees of covalent tetrahedral short-range order in the liquid. The degree of tetrahedral short-range order increases linearly as the Si concentration in the liquid increased. The diffusion coefficients of both Al and Si atoms in liquid Al_1−xSi_x alloys at 1573 K are not very sensitive to the composition.     

The electrical switching and thermal behavior of bulk Ge15Te85 − xSnx and Ge17Te83 − xSnx glasses

Bulk Ge₁₅Te_85 ? xSn_x and Ge₁₇Te_83 ? xSn_x glasses, are found to exhibit memory type electrical switching. The switching voltages (V_t) and thermal stability of Ge₁₅Te_85 ? xSn_x and Ge₁₇Te_83 ? xSn_x glasses are found to decrease with Sn content. The composition dependence of V_t has been understood on the basis of the decrease in the OFF state resistance and thermal stability of these glasses with tin addition. X-ray diffraction studies reveal that no elemental Sn or Sn compounds with Te or Ge are present in thermally crystallized Ge–Te–Sn samples. This indicates that Sn atoms do not interact with the host matrix and form a phase separated network of its own, which remains in the parent glass matrix as an inclusion. Consequently, there is no enhancement of network connectivity and rigidity. The thickness dependence of switching voltages of Ge₁₅Te_85 ? xSn_x and Ge₁₇Te_83 ? xSn_x glasses is found to be linear, in agreement with the memory switching behavior shown by these glasses.     

Thermally reversing window in Ge15Te85 − xInx glasses: Nanoindentation and micro-Raman studies

Nanoindentation studies on Ge₁₅Te_85 ? xIn_x glasses indicate that the hardness and elastic modulus of these glasses increase with indium concentration. While a pronounced plateau is seen in the elastic modulus in the composition range 3 ≤ x ≤ 7, the hardness exhibits a change in slope at compositions x = 3 and x = 7. Also, the density exhibits a broad maximum in this composition range. The observed changes in the mechanical properties and density are clearly associated with the thermally reversing window in Ge₁₅Te_85 ? xIn_x glasses in the composition range 3 ≤ x ≤ 7. In addition, a local minimum is seen in density and hardness around x = 9, the chemical threshold of the system. Further, micro-Raman studies reveal that as-quenched Ge₁₅Te_85 ? xIn_x samples exhibit two prominent peaks, at 123 cm^? 1 and 155 cm^? 1. In thermally annealed samples, the peaks at 120 cm^? 1 and 140 cm^? 1, which are due to crystalline Te, emerge as the strongest peaks. The Raman spectra of polished samples are similar to those of annealed samples, with strong peaks at 123 cm^? 1 and 141 cm^? 1. The spectra of lightly polished samples outside the thermally reversing window resemble those of thermally annealed samples; however, the spectra of glasses with compositions in the thermally reversing window resemble those of as-quenched samples. This observation confirms the earlier idea that compositions in the thermally reversing window are non-aging and are more stable.     

Effect of Ti addition on the crystallization behavior and glass-forming ability of Zr-Al-Cu alloys

The crystallization behavior of melt-spun (Zr₆₅Al_7.5Cu_27.5)_100−xTi_x (x = 0-15; in at.%) metallic glasses has been investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). The DSC traces showed an altered crystallization mode in the vicinity of 3 at.% Ti addition. A metastable icosahedral quasicrystal precipitated at the first crystallization stage of the Ti-bearing metallic glasses, which subsequently transformed to the stable Zr₂Cu-type phase in the followed exothermic reaction. The glass-forming abilities (GFAs) of these metallic glasses were assessed by the recognized GFA indicators T_rg, ΔT_x and γ. BMGs were easily made in the compositions containing 3-7 at.% Ti by means of copper mold casting. The validity of these parameters was clarified using the critical BMG forming diameter evidence.     

Crystallization behavior and microstructure of powdered and bulk ZnO-Al2O3-SiO2 glass-ceramics

The crystallization behavior of glass with the composition: 55.6 mol% SiO₂, 22.8 mol% Al₂O₃, 17.7 mol% ZnO and 3.84 mol% of TiO₂ as nucleating agent and with different particle sizes has been studied by differential scanning calorimetry (DSC), X-ray diffraction (XRD) and tranmission electron microscopy (TEM). In glass powders two crystalline phases: zinc-aluminosilicate s.s. with high-quartz structure, Zn_x/2Al_xSi_3−xO₆, (x varies dependent on heat-treatment temperature) and gahnite are formed. The ratio of these phases depends on particle sizes. In bulk glass, however, gahnite is the sole crystalline phase. The composition of initially formed zinc-aluminosilicate s.s. was determined by Rietveld refinement of XRD patterns to be Zn_0.69Al_1.38Si_1.62O₆. With temperature increase, the amount of zinc-aluminosilicate s.s decreased with simultaneous reduce of zinc and aluminum incorporated in the structure. Eventually at 1423 K almost pure high-quartz structure was formed. The activation energies of zinc-aluminosilicate s.s. and gahnite crystallization were determined by non-isothermal method to be 510 ± 18 and 344 ± 17 kJ mol⁻¹, respectively. The latter value matches well with those cited in literature for crystal growth of gahnite in similar glasses. That is attributed to the fact that the high-quartz structure acts as a precursor for gahnite crystallization.     

Non-isothermal crystallization kinetics study on new amorphous Ga20Sb5S75 and Ga20Sb40S40 chalcogenide glasses

Bulk glasses of the system Ga₂₀Sb_xS_80−x (x = 5 and 40) were prepared for the first time by the known melt quenching technique. Non-isothermal differential scanning calorimetric (DSC) measurements of as-quenched Ga₂₀Sb_xS_80−x (x = 5 and 40) chalcogenide glasses reveal that the characteristic temperatures e.g. the glass transition temperature (T_g), the temperature corresponding to the maximum crystallization rate (T_p) recorded in the temperature range 400-650 K for x = 5 and 480-660 K for x = 40 are strongly dependent on heating rate and Sb content. Upon heating, these glasses show a single glass transition temperature (T_g) and double crystallization temperatures (T_p1 and T_p2) for x = 5 which overlapped and appear as a single crystallization peak (T_p) for x = 40. The activation energies of crystallization E_c were evaluated by three different methods. The crystallization data were examined in terms of recent analysis developed for non-isothermal conditions. The crystalline phases resulting from (DSC) have been identified using X-ray diffraction.     

Nano- and micro-indentation studies on lithium borate-barium bismuth niobate glasses

The structure and mechanical properties of multifunctional lithium tetra-borate based glasses and glass-ceramics of the system (100 − x) Li₂B₄O₇₋x(BaO-Bi₂O₃-Nb₂O₅) with x = 10, 20 and 30 in molar ratio, have been characterized. Nano- and micro-indentation techniques were employed to evaluate the elastic modulus, hardness and toughness of the as-cast and annealed glasses. These were complemented with detailed structural investigations using X-ray diffraction, microscopy (optical, scanning electron and high resolution transmission electron microscopies) and nuclear magnetic resonance spectroscopy. These investigations reveal a smooth variation of the mechanical properties with composition except for the composition corresponding to x = 20. This deviation has been attributed to subtle changes in the glass-structure due to amorphous phase-separation and heat-treatment-assisted nano-crystallization.     

Crystallization kinetics of Fe73.5−xMnxCu1Nb3Si13.5B9 (x = 0, 1, 3, 5, 7) amorphous alloys

In this study, we have investigated the effect of substituting Mn for Fe on the crystallization kinetics of amorphous Fe_73.5−xMn_xCu₁Nb₃Si_13.5B₉ (x = 1, 3, 5, 7) alloys. The samples were annealed at 550 °C and 600 °C for 1 h under an argon atmosphere. The X-ray diffraction analyses showed only a crystalline peak belonging to the α-Fe(Si) phase, with the grain size ranging from 12.2 nm for x = 0 to 16.7 nm for x = 7. The activation energies of the alloys were calculated using Kissinger, Ozawa and Augis-Bennett models based on differential thermal analysis data. The Avrami exponent n was calculated from the Johnson-Mehl-Avrami equation. The activation energy increased up to x = 3, then decreased with increasing Mn content. The values of the Avrami exponent showed that the crystallization is typical diffusion-controlled three-dimensional growth at a constant nucleation rate.     

Structure and properties of Ni60(Nb100−xTax)34Sn6 bulk metallic glass alloys

Refractory bulk metallic glasses and bulk metallic glass composites are formed in quaternary Ni-Nb-Ta-Sn alloy system. Alloys of composition Ni₆₀(Nb_100−xTa_x)₃₄Sn₆ (x = 20, 40, 60, 80) alloys were prepared by injection-casting the molten alloys into copper molds. Glassy alloys are formed in the thickness of half mm strips. With thicker strips (e.g., 1 mm), Nb₂O₅ and Ni₃Sn phases and the amorphous phase form an in situ composite. Glass transition temperatures, crystallization temperatures, and ΔT_x, defined as T_x1 − T_g (T_x1: first crystallization temperature, T_g: glass transition temperature) of the alloys increase dramatically with increasing Ta contents. These refractory bulk amorphous alloys exhibit high Young’s modulus (155-170 GPa), shear modulus (56-63 GPa), and estimated yield strength (3-3.6 GPa).     

The structure and optical properties of GeO2-GeS2 glasses

Oxy-chalcogenide glasses with compositions of xGeO₂-(100 − x)GeS₂, where 0 ? x ? 100 mol%, have been prepared and studied in terms of their structures and optical properties. X-ray fluorescence spectroscopy shows that Ge:S ratio can deviate from GeS₂ by ∼10 at.%, depending critically upon the preparation conditions. Raman scattering spectroscopy suggests that stoichiometric GeO₂-GeS₂ glasses have a heterogeneous structure in the scale of 1-100 nm. The optical gaps are nearly constant at 3.0-3.5 eV for glasses with 0 ? x ? 80 mol% and abruptly increase to ∼6 eV in GeO₂. This dependence suggests that the optical gap is governed by GeS₂ clusters, which are isolated and/or percolated. Composition-deviated glasses appear as orange and brown, and these glasses seem to have more inhomogeneous structures.     

Network topological thresholds in gallium doped As–Te glasses – Electrical and thermal investigations

Electrical switching and differential scanning calorimetric studies are undertaken on bulk As₂₀Te_80−xGa_x glasses, to elucidate the network topological thresholds. It is found that these glasses exhibit a single glass transition (T_g) and two crystallization reactions (T_c1 & T_c2) upon heating. It is also found that there is only a marginal change in T_g with the addition of up to about 10% of Ga; around this composition an increase is seen in T_g which culminates in a local maximum around x = 15. The decrease exhibited in T_g beyond this composition, leads to a local minimum at x = 17.5. Further, the As₂₀Te_80−xGa_x glasses are found to exhibit memory type electrical switching. The switching voltages (V_T) increase with the increase in gallium content and a local maximum is seen in V_T around x = 15. V_T is found to decrease with x thereafter, exhibiting a local minimum around x = 17.5. The composition dependence of T_c1 is found to be very similar to that of V_T of As₂₀Te_80−xGa_x glasses. Based on the present results, it is proposed that the composition x = 15 and x = 17.5 correspond to the rigidity percolation and chemical thresholds, respectively, of As₂₀Te_80−xGa_x glasses.     

A multinuclear NMR study of sodium-borovanadophosphate glasses

xNaVO₃ · yNaPO₃ · (1 − y)NaBO₂ glasses were prepared where x = 0.0, 0.05, 0.5 and 0 ? y ? 1. These glasses have been investigated with multinuclear MAS NMR. ⁵¹V NMR spectra show that two vanadate configurations are possible, assigned as four and five coordinated vanadium. The concentration of the latter group decreases upon addition of sodium-borate. The presence of four and three coordinated boron sites can be deduced from the ¹¹B NMR spectra. The latter boron sites appear only when borate groups are connected to each other. ³¹P NMR spectra of borophosphates and borovanadophosphates show that the ratio of pyro- and metaphosphates is greater in the glasses containing vanadate than in simple borophosphates. These results indicate phosphate to be the most acidic agent and therefore the best chain-terminating group in these glasses.