A glass with high crack initiation load: Role of fictive temperature-independent mechanical properties

The crack initiation load of a series of calcium aluminosilicate glasses and selected commercial glasses were evaluated using Vickers indentation. The results showed that a calcium aluminosilicate glass containing 80 mol% SiO₂, 10 mol% Al₂O₃ and 10 mol% CaO exhibited a high crack initiation load comparable to that of the less-brittle glass (LB glass) developed by Asahi Glass Co., Ltd. It has previously been determined that glasses experience a fictive temperature increase by indentation. The indented region of a glass, therefore, acquires, in general, different mechanical properties, such as hardness and elastic moduli, from the original, unindented glass. The extent of these mechanical property changes depends upon the glass composition and a certain glass composition with fictive temperature-independent mechanical properties can have the deformed region with matching mechanical properties to those of the undeformed region of the glass. It was found that the calcium aluminosilicate glass having no fictive temperature dependence on elastic moduli gave the highest crack initiation load. However, this composition did not coincide with fictive temperature-independence of hardness or density.     

Synthesis and characterization of calcium phosphate based bioactive quaternary P2O5-CaO-Na2O-K2O glasses

Calcium phosphate based bioactive quaternary glass systems P₂O₅-CaO-Na₂O-K₂O were prepared by melt growth technique. Glasses were prepared in five different compositions by fixing P₂O₅ at 47 mol% and CaO at 30.5 mol% and by varying the K₂O and Na₂O concentrations. The structural properties of the glasses are analyzed using X-ray diffraction (XRD) studies and scanning electron microscopy (SEM) studies; and the composition of the glasses are studied using energy dispersive X-ray spectrum (EDS). The microhardness of the glass systems are studied by Vickers hardness measurements and the bioactivity of the glasses are studied using in vitro study. The thermal properties have been examined by means of thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The ultrasonic velocity measurements show that the addition of K₂O contents produces non-bridging oxygen ion and hence weaken of the glass structure. The weakening of the glass structure reduces the ultrasonic velocity and hence an increase in attenuation.     

Plasticity induced by nanoparticle dispersions in bulk metallic glasses

We show room temperature plasticity in several ZrCu-based bulk metallic glasses (BMG) after dispersions of crystalline nanoparticles were generated prior to mechanical testing. BMGs are heated in synchrotron light in transmission such that annealing can be interrupted at the very first detection of nucleation of the crystallites. Effect of embedded nanocrystals on the mechanical properties of BMG-Composites was investigated by compressive testing. When nanocrystal dispersions were generated, zirconium-copper-based BMGs that initially showed no plastic deformation prior to fracture, exhibited ductile behavior in compression with about 10% deformation.     

Superscratch-resistant glass by means of a transparent nanostructured inorganic coating

Silica nanoparticles were synthesized by a reverse microemulsion method and deposited on soda-lime silica substrates. The deposition of these nanoparticles by dip-coating gave rise to close-packed layers, which significantly modify the scratch resistance of the surface. The silica nanoparticles are found to spread out the stress at the surface/indenter contact and to favor microductile behavior.     

Structure of potassium germanophosphate glasses by X-ray and neutron diffraction: 2. Medium-range order

Characteristics of the medium-range order (MRO) of K₂O-GeO₂-P₂O₅ (KGP) glasses are obtained from X-ray and neutron scattering data. The behavior of the MRO is expressed in changes of pre-peaks and smooth contributions in the structure factors, S(Q), for Q < 12 nm^-1. Peaks at Q = (7.5 ± 0.5) nm^-1 (Q - magnitude of the scattering vector) are the outstanding features and reach maximum intensity for a glass of ∼25/50/25 mol% K₂O/GeO₂/P₂O₅. The pre-peaks are explained by a structural model in which K-rich and Ge-rich regions are separated by PO₄ units. The distance of repetition of similar regions (∼1 nm) is responsible for the pre-peak at ∼7.5 nm^-1. The intensity of this pre-peak is reduced and finally eliminated for glass compositions approaching the binary GeO₂-P₂O₅ system. The pre-peak is changed to a smooth scattering contribution and finally shifted to ∼9 nm^-1 for glass compositions approaching the binary K₂O-GeO₂ system. The strong tendency of the PO₄ units to coordinate K⁺ and Ge neighbors at their four corners is the source for the special MRO of the KGP glasses.     

Thermal and some physical properties of glasses in the La2O3−CaO−B2O3 ternary system

Glasses in the La₂O₃−CaO−B₂O₃ ternary system were studied. The glass forming range as determined by the appearance of the annealed cast was found to match previously published findings. Clear glasses were formed in the composition range of 5.7−19.1 mol% La₂O₃ with constant B₂O₃ content of 71.4 mol%, and in glasses of constant La₂O₃:CaO ratio of 1:4 with B₂O₃ content in the range of 71.4-55.0 mol%. The non-linear optical crystalline phase La₂Ca₂B₁₀O₁₉ was crystallized from the clear glasses after heat treatments, as determined by powder XRD. Two types of the LaBO₃ crystalline phases were detected in the partially and the fully crystallized glass compositions outside the glass forming range. Data are reported for the glass transition temperature (T_g), dilatometric softening point (T_d), linear coefficient of expansion (α), onset crystallization temperature (T_x), exothermal peak temperature (T_P), density (ρ) and index of refraction (n_D) in the clear glasses.     

Structure of potassium germanophosphate glasses by X-ray and neutron diffraction. Part 1: Short-range order

It has been reported that the addition of K₂O or P₂O₅ to binary germanate glasses increases the Ge−O coordination numbers (N_GeO). The present work describes X-ray and neutron diffraction studies aimed at clarifying the concomitant effects of both oxides on the structures of ternary K₂O-GeO₂-P₂O₅ glasses. The Ge−O coordination numbers obtained range from 4.2 to 5.1, less than what is predicted according to a model which assumes all oxygen atoms form network bridges similar to those found in the related crystal structures. This implies that the glass structures must include terminal oxygen sites, likely associated with the PO₄ tetrahedra, that are neutralized by coordinating K⁺ ions. The shapes of the high resolution first-neighbor diffraction peaks do not indicate distinctly different species of P−O and Ge−O bonds. The model for the increase of N_GeO which is based on an increase of the fraction of GeO₆ units, at the expense of GeO₄ units, is supported by the analysis of the two main components of the Ge−O peak used in the fits. However, the existence of a GeO₅ fraction cannot be excluded from the present data sets. A linear relation between the total Ge−O coordination numbers and mean Ge−O distances exists, assuming end members of units GeO₄ and GeO₆ with bond lengths of ∼0.175 and ∼0.190 nm, respectively.     

Solubility of glasses in the system P2O5-CaO-MgO-Na2O-TiO2: Experimental and modeling using artificial neural networks

Phosphate glasses in the system P₂O₅-CaO-MgO-Na₂O-TiO₂ for use as degradable implant materials were produced. In order to classify their solubility behavior, dissolution experiments were performed in deionized water for 60 min at 98 °C. Resulting solutions were analyzed using ICP-OES. In addition, pH measurements were carried out in physiological NaCl solution. With increasing phosphorus oxide content, the glasses showed a higher solubility and gave lower pH values in aqueous solution. This was caused by changes in the glass structure, as long phosphate chains are more susceptible to hydration than smaller phosphate groups. These changes in glass structure were followed by ³¹P MAS-NMR experiments. Increasing sodium oxide concentrations in exchange for calcium or magnesium oxide also increased the glass solubility by disrupting ionic cross links between chains. By contrast, addition of titania made the glasses more stable towards dissolution by cross linking smaller phosphate groups. The aim of this study was to find a relationship between glass composition and solubility behavior. As classical linear methods of data analysis were unsuitable due to the complexity of the relationship, preliminary artificial neural networks analyses were performed and were found to be an interesting tool for modeling the solubility behavior of phosphate glasses.     

Stress-enhanced ion diffusion at the vicinity of a crack tip as evidenced by atomic force microscopy in silicate glasses

The slow advance of a crack in soda-silicate glasses was studied at nanometer scale by in-situ and real-time atomic force microscopy (AFM) in a well-controlled atmosphere. An enhanced diffusion of sodium ions in the stress-gradient field at the sub-micrometric vicinity of the crack tip was revealed through several effects: growth of nodules in AFM height images, changes in the AFM tip-sample energy dissipation. The nodules patterns revealed a dewetting phenomenon evidenced by ‘breath figures’. Complementary chemical micro-analyses were done. These experimental results were explained by a two-step process: (i) a fast migration (typical time: few milliseconds) of sodium ions towards the fracture surfaces as proposed by Langford et al. [J. Mat. Res. 6 (1991) 1358], (ii) a slow backwards diffusion of the cations as evidenced in these AFM experiments (typical time: few minutes). Measurements of the diffusion coefficient of that relaxing process were done at room temperature. Our results strengthen the theoretical concept of a near-surface structural relaxation due to the stress-gradient at the vicinity of the crack tip. The inhomogeneous migration of sodium ions might be a direct experimental evidence of the presence of sodium-rich channels in the silicate structure [A. Meyer et al., Phys. Rev. Let. 93 (2004) 027801].     

Sulfur behavior in silicate glasses and melts: Implications for sulfate incorporation in nuclear waste glasses as a function of alkali cation and V2O5 content

The presence of sulfur in radioactive waste to be incorporated in borosilicate glasses entails difficulties mainly due to the relatively low solubility of sulfates in the vitreous phase. In this work a study is presented on the effects of the ratio R = [Na₂O]/[B₂O₃], the type of sulfate added and the addition of V₂O₅ on the incorporation of sulfates in borosilicate glasses. Glass samples were prepared at the laboratory scale (up to 50-100 g) by melting oxide and sulfate powders under air in Pt/Au crucibles. XRF and ICP/AES chemical analysis, SEM/EDS, microprobe WDS and Raman spectroscopy were employed to characterize the fabricated samples. The main experimental results confirm that the incorporation of sulfates in borosilicate glasses is favored by the network depolymerization, which evolves with the ratio R. The addition of V₂O₅ seems to accelerate the kinetics of sulfur incorporation in the glass and, probably, increase the sulfate solubility by modifying the borate network and fostering the formation of voids of shape and size compatible with the sulfur coordination polyhedron in the glassy network. The kinetics of X₂SO₄ incorporation in the glass seems to be slower when X = Cs.     

Point defect formation and annihilation in silica glass by heat-treatment: Role of water and stress

It was discovered that E′ centers were created by heat-treatment when silica glass contains water and has residual stress. Silica glass samples were heat-treated at 1000 °C for various lengths of time in 355 torr (47 000 Pa) water vapor pressure and dry nitrogen gas atmospheres. The electron paramagnetic resonance (EPR) signal of E′ centers increased initially with heat-treatment time in both atmospheres but then decreased afterwards in the wet atmosphere. It is known that water molecules eliminate paramagnetic defects, such as E′ centers and non-bridging oxygen hole centers (NBOHCs) by reacting with these defects in the glass, transforming them to non-paramagnetic species such as Si-OH or Si-H. The present study indicates that water molecules are also capable of initially creating paramagnetic defects in the glass structure by breaking the silica network structure in the presence of stress. The present observation may be relevant to mechanical strength reduction of silica glasses, which is commonly observed in the presence of water and stress.     

The effect of thermal annealing on the structural and mechanical properties of a-C:H thin films prepared by the CFUBM magnetron sputtering method

a-C:H films were prepared by closed-field unbalanced magnetron (CFUBM) sputtering on silicon substrates using argon (Ar) and acetylene (C₂H₂) gases, and the effects of post-annealing temperature on structural and mechanical properties were investigated. Films were annealed at temperatures ranging from 300 °C to 700 °C in increments of 200 °C using rapid thermal annealing equipment in vacuum ambient. Variations in microstructure were examined using Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). Surface and mechanical properties were investigated by atomic force microscopy (AFM), nano-indentation, residual stress tester, and nano-scratch tester. We found that the mechanical properties of a-C:H films deteriorated with increased annealing temperature.