Self organized nano crystallinity of magnetite precipitated from a 4.9Na2O · 33.3CaO · 17.1Fe2O3 · 44.7B2O3 glass

Glasses with the mol% composition 4.9Na₂O · 33.3CaO · 17.1Fe₂O₃ · 44.7B₂O₃ were melted, rapidly quenched using a twin roller technique, and subsequently tempered in the range from 550 to 620 °C. This led to the crystallization of magnetite with mean crystallite sizes in the 10-20 nm range. Using higher temperatures resulted in a larger quantity of formed crystallites and slightly larger mean crystallite sizes. Larger tempering times did not lead to substantial crystal growth. The time law of Ostwald ripening was not followed. This is explained by an increase in viscosity of the residual glassy phase during nucleation and crystal growth. Here, the smaller iron concentration near the crystals leads to higher viscosities and to the formation of a diffusional barrier around the crystals, which reduces further crystal growth. The crystallization stops, if T_g of the residual glassy phase is equal to the tempering temperature. Magnetite nano crystals with sizes in the 10-20 nm range offer a wide range of applications, such as the preparation of ferrofluids or of materials for medical diagnostics and therapy.     

Effect of pressure on the refractive index and relative density of the CaO · Al2O3 · 6SiO2 glass

The refractive index for glass of the CaO · Al₂O₃ · хSiO₂ system with х = 6 in the range of pressures up to 6.0 GPa was measured using a polarization-interference microscope and an apparatus with diamond anvils. The changes in the relative density characterizing the compressibility of glass were estimated from the measured refractive indices within the framework of the theory of photoelasticity. The data were compared with the previous data for glasses of the same system with х = 2 and 4. The most compressible of the three glasses in the range 2.0-6.0 GPa was the CaO · Al₂O₃ · 6SiO₂ glass. For glasses with х = 2, 4 and 6 we calculated the degrees of polymerization of silicon-aluminum-oxygen network, NBO/T (NBO - non-bridging oxygen), which are determined as the ratio of the number of gram-ions of non-bridging oxygen atoms to the total number of gram-ions of network formers. The structure-chemical parameter NBO/T was calculated with due regard for the formation of triclusters and highly coordinated aluminum. The degree of polymerization of the CaO · Al₂O₃ · хSiO₂ glasses increases with increasing х, which agrees with the change of their relative density under pressure.     

Optical properties of Cr ion in lithium metasilicate Li2O · SiO2 transparent glass-ceramics

The optical properties of Cr³⁺ ions in lithium metasilicate (Li₂O · SiO₂) transparent glass-ceramics were investigated. The main crystalline phase precipitated was the lithium metasilicate (Li₂O · SiO₂) crystal. The percent crystallinity and crystalline size were ranging 65-75% and 20-35 nm, respectively. The color changes drastically to deep pink from emerald green upon crystallization. New and strong absorption bands appeared and the absorption intensity increases by about 10 times that in glass. These new absorption bands are found to be derived from Cr³⁺ ions in octahedral sites in the lithium metasilicate crystal lattice. Cr³⁺ ions substitute for three Li⁺ ions and occupy the distorted octahedral site between single [SiO₄]_n chains of lithium metasilicate crystal. The ligand field parameters can be estimated: 10Dq = 13 088 cm⁻¹, B = 453 cm⁻¹, Dq/B = 2.89 and C = 2036 cm⁻¹. The near-infrared luminescence centered at 1250 nm was not detected in the deep pink glass-ceramics unlike emerald green glass.     

Ionic conduction, diffusion and glass transition in 0.2[XNa2O · (1−X)Rb2O] · 0.8B2O3

We have investigated the ionic transport in the 0.2[XNa₂O · (1−X)Rb₂O] · 0.8B₂O₃ mixed-alkali system with X=0.0, 0.2, 0.4, 0.6, 0.8, and 1.0 in the glassy and the undercooled-liquid state by means of impedance spectroscopy and tracer diffusion experiments. The calorimetric glass-transition temperature T_g obtained by differential scanning calorimetry shows a minimum with composition. The composition dependence of the electrical conductivity below T_g exhibits a minimum, as well. These deviations from an ‘ideal’ linear mixing rule are usually denoted as mixed-alkali effect. The dc conductivities times temperature σ_dc×T follow the Arrhenius law in the range below and above T_g, respectively. The glass transition appears as a kink in the Arrhenius presentation of σ_dc×T. Below the glass-transition temperature the onset frequency ν_on of the conductivity dispersion has an Arrhenius-like temperature dependence. According to ‘Summerfield scaling’ the activation enthalpies of σ_dc×T and ν_on are expected to be the same. This is indeed observed but only for the single-alkali compositions. The activation enthalpies of σ_dc×T as a function of composition show a classical mixed-alkali maximum, however the activation enthalpies of the onset frequencies as a function of composition exhibit a nearly constant behavior in contrast to the expectation from Summerfield scaling. The tracer diffusion measurements reveal a major difference in diffusion of ⁸⁶Rb and ²²Na in mixed-alkali glasses. A diffusivity crossover of tracer diffusion coefficients of ²²Na and ⁸⁶Rb occurs near X=0.2. By comparison of tracer and conductivity diffusivities the Haven ratio is deduced which shows a maximum near the conductivity minimum composition.     

Crystallization of Na2OSiO2 gel and glass

The crystallization behavior of a 19 wt% soda silica gel and gel-derived glass was compared to that of the ordinary glass of the same composition. Both bulk and ground glass samples were utilized. X-ray diffraction measurements were made to identify the crystalline phases and gauge the extent of crystallization. It was found that the gel crystallized in a distinctive manner, while the gel glass behavior was not qualitatively different from that of the ordinary glass.     

Spectrometric and ellipsometric studies of (1 − x)TiO2 · xLn2O3 (Ln = Nd, Sm, Gd, Er, Yb) thin films

Spectrometric and ellipsometric studies of (1 − x)TiO₂ · xLn₂O₃ (Ln = Nd, Sm, Gd, Er, Yb; x = 0.33, 0.5) thin films at room temperature were performed. The obtained dispersion dependences of refractive indices are successfully described by the optical-refractometric relation. The dependence of optical pseudogap and refractive indices on composition and molar mass of the films is investigated. The influence of compositional disordering on the energy width of the exponential absorption edge is studied.     

Nano-crystallization in LaF3–Na2O–Al2O3–SiO2 glass

Aiming at tailoring optical properties, the precipitation of LaF₃ nano-crystals in LaF₃–Na₂O–Al₂O₃–SiO₂ glass-ceramics is studied thoroughly on the nano-scale using advanced transmission electron microscopic techniques. Nano-sized phase-separation droplets enriched in lanthanum and silicon are formed already in the base glass. Within these less than 20 nm large droplets, LaF₃ crystallizes upon heat treatment. The nano-crystallization mechanism revealed is self-limited since growth is restricted by the size of the droplets. An average crystallite size of around 12 nm is achieved with a narrow size distribution since the phase-separation droplets also contain silicon not incorporated into the growing crystal. Instead, excess silicon relocated to the periphery of the pre-existing phase-separation droplets forms a diffusion barrier around the LaF₃ nano-crystals preventing further crystal growth and/or ripening.     

Crystallization and glass transition kinetics in Cu ion substituted Cux-Ag1 − xI-Ag2O-V2O5 superionic glasses

Crystallization kinetics and thermal properties in superionic glasses Cu_xAg_1 − xI-Ag₂O-V₂O₅ for x = 0.1-0.3 have been thoroughly investigated. X-ray diffraction and differential scanning calorimetry measurements confirm the precipitation of at least three compounds during crystallization, viz. AgI, Ag₄V₂O₇ and Ag₈I₄V₂O₇. The activation energies for structural relaxation (E_s) and crystallization (E_c) obtained using Moynihan and Kissinger formulation exhibit interesting trends with CuI substitution. The E_s value decreases with CuI substitution in the system. Further, the E_c values corresponding to precipitation of Ag₄V₂O₇ and Ag₈I₄V₂O₇ exhibit increasing trend, whereas, for that of AgI precipitation a decreasing trend with CuI content. The Avrami parameter calculated from Augis-Bennett method and Ozawa equation suggests predominantly surface crystallization in the glassy system. The electrical conductivity-temperature (σ-T) cycles interestingly demonstrate increasing precipitation of AgI with CuI content in the glass matrix.     

Sodium tracer diffusion in glasses of the type (Na2O)0.2(B2O3)y(SiO2)0.8 − y

Sodium tracer diffusion coefficients, D^?_Na, have been measured in sodium borosilicate glasses of the type (Na₂O)_0.2(B₂O₃)_y(SiO₂)_0.8−y as a function of temperature and the composition parameter y. At constant temperature, the tracer diffusion coefficient of sodium decreases as y increases. The activation enthalpy derived from sodium tracer diffusion data for temperatures up to about 350 °C increases about linearly with increasing values of y from about 70 to 100 kJ/mol. The pre-exponential factor of the sodium tracer diffusion coefficient as a function of y varies by about one order of magnitude and has a minimum at near y = 0.3.     

A kinetic treatment of glass formation. VIII: Critical cooling rates for Na2OSiO2 and K2OSiO2 glasses

The critical cooling rates required to form glass have been measured for Na₂OSiO₂ compositions containing 15.4, 20.6, 29.9 and 34.0 wt% Na₂O and for K₂OSiO₂ compositions containing 15.3, 21.7, 34.3, 41.8 and 43.9 wt% K₂O. Pronounced minima in critical cooling rate are observed in the ranges about 25 wt% Na₂O and 33 wt% K₂O. The locations of these minima correlate with regions of low liquidus temperatures (near eutectics) in the phase diagrams.Calculations of critical cooling rates have been carried out using the analysis of crystallization statistics and the simplified model of glass formation. In both cases, the models predict well the measured critical cooling rates and their variation with composition.     

RDF analysis, positron annihilation and Raman spectroscopy of xTiO2-(60 − x)SiO2-40Na2O non-linear optical glasses: III. Non-bridging oxygen bonds tracing and structure analysis

xTiO₂-(60 − x)SiO₂-40Na₂O glasses have proven an interesting linear and non-linear optical properties [M. Abdel-Baki, F. Abdel Wahab, F. El-Diasty, Mater. Chem. Phys. 96 (2006) 201]. The investigated glasses show one order of magnitude enhancement for the second-order index of refraction and third-order optical susceptibility over some TiO₂ silicate glasses. In this work, we continue studying these glasses using three different techniques to analyze the glass structures seeking to provide a deep insight for the relation between structure, compositions and the optical characteristics of these glasses. Radial Distribution Function analysis (RDF) combined Raman spectroscopy are used to study these glasses. Positron annihilation lifetime spectroscopy and Doppler broadening measurements are carried out to investigate the change in the glass structure as the incorporation of TiO₂ concentration into glass. The origin of the non-bridging oxygen (NBO) bonds has been traced to correlate their existence with the measured non-linear optical properties of the investigated glasses.     

The glass transition temperature and infrared absorption spectra of: (70−x)TeO2 + 15B2O3 + 15P2O5 + xLi2O glasses

Glasses of the system: (70−x) TeO₂ + 15B₂O₃ + 15P₂O₅ + xLi₂O, where x = 5, 10, 15, 20, 25 and 30 mol% were prepared by melt quench technique. Dependencies of their glass transition temperatures (T_g) and infrared (IR) absorption spectra on composition were investigated. It is found that the gradual replacement of oxides, TeO₂ by Li₂O, decreases the glass transition temperature and increases the fragility of the glasses. Also, IR spectra revealed broad weak and strong absorption bands in the investigated range of wave numbers from 4000 to 400 cm⁻¹. These bands were assigned to their corresponding bond modes of vibration with relation to the glass structure.     

Sodium tracer diffusion in glasses of the type (Na2O)0.2[(BO1.5)x(SiO2)1 − x]0.8

Sodium tracer diffusion coefficients, D_Na*, have been measured in sodium borosilicate glasses of the type (Na₂O)_0.2[(BO_1.5)_x(SiO₂)_1 − x]_0.8 as a function of temperature and the composition parameter x. In these glasses, which can alternatively also be described by using the formula Na₂O·(2B₂O₃)_x·(4SiO₂)_1 − x, one network former unit, SiO₂, is replaced by another one, BO_1.5, while keeping the sodium concentration constant. At constant temperature, the tracer diffusion coefficient of sodium as a function of x has a shallow minimum at about x = 0.7. At temperatures below about 310 °C the temperature dependences of the measured tracer diffusion coefficients are of Arrhenius-type; at higher temperatures one observes an increase in the temperature dependence with increasing temperature. The activation energy derived from sodium tracer diffusion data for temperatures up to about 310 °C increases about linearly with increasing x from about 70 to 80 kJ/mol. The pre-exponential factor as a function of x varies by about one order of magnitude and has a minimum at about x = 0.4. Values derived for the Haven-ratio are smaller than one and show a shallow minimum as a function of x at around x = 0.75. Furthermore, it was investigated whether there is a significant, directly measurable uptake of water during annealing in moist atmospheres and whether water taken up from moist atmospheres can influence the diffusion of sodium.     

The comparative structure, properties, and ionic conductivity of LiI + Li2S + GeS2 glasses doped with Ga2S3 and La2S3

The well known and characterized fast ion conducting (FIC) LiI + Li₂S + GeS₂ glass-forming system has been further optimized for higher ionic conductivity and improved thermal and chemical stability required for next generation solid electrolyte applications by doping with Ga₂S₃ and La₂S₃. These trivalent dopants are expected to eliminate terminal and non-bridging sulfur (NBS) anions thereby increasing the network connectivity while at the same time increasing the Li⁺ ion conductivity by creating lower basicity [(Ga or La)S_4/2]⁻ anion sites. Consistent with the finding that the glass-forming range for the Ga₂S₃ doped compositions is larger than that for the La₂S₃ compositions, the addition of Ga₂S₃ is found to eliminate NBS units to create bridging sulfur (BS) units that not only gives an improvement to the thermal stability, but also maintains and in some cases increases the ionic conductivity. The compositions with the highest Ga₂S₃ content showed the highest T_gs of ∼325 °C. The addition of La₂S₃ to the base glasses, by comparison, is found to create NBS by forming high coordination octahedral LaS₆³⁻ sites, but yet still improved the chemical stability of the glass in dry air and retained its high ionic conductivity and thermal stability. Significantly, at comparable concentrations of Li₂S and Ga₂S₃ or La₂S₃, the La₂S₃-doped glasses showed the higher conductivities. The addition of the LiI to the glass compositions not only improved the glass-forming ability of the compositions, but also increased the ionic conductivity glasses. LiI concentrations from 0 to 40 mol% improved the conductivities of the Ga₂S₃ glasses from ∼10⁻⁵ to ∼10⁻³ (Ω cm)⁻¹ and of the La₂S₃ glasses from ∼10⁻⁴ to ∼10⁻³ (Ω cm)⁻¹ at room temperature. A maximum conductivity of ∼10⁻³ (Ω cm)⁻¹ at room temperature was observed for all of the glasses and this value is comparable to some of the best Li ion conductors in a sulfide glass system. Yet these new compositions are markedly more thermally and chemically stable than most Li⁺ ion conducting sulfide glasses. LiI additions decreased the T_gs and T_cs of the glasses, but increased the stability towards crystallization (T_c − T_g).     

Comment on ‘Modification of vacuum-ultraviolet absorption of SiOH groups in SiO2 glass with temperature, F2 laser irradiation, and H-D isotope exchange’ by K. Kajihara et al. [J. Non-Cryst. Solids 2307 (2006)]

The modification of SiOH groups in SiO₂ by F₂ laser irradiation studied in the paper by Kajihara et al. [K. Kajihara, M. Hirano, L. Skuja, H. Hosono, J. Non-Cryst Solids 352 (2006) 2307] is discussed on the base of ab initio calculations. The calculated energy barrier of transformation of an oxygen tricluster (bridging oxygen forming the third covalent bond with an hydrogen atom) into a silanol group and the frequency of OH stretching vibration in the tricluster suggest that the triclusters can be products of F₂ laser irradiation of ‘wet’ silica glass.     

Spectroscopic and magnetic behavior of xNd2O3(1−x)(3Bi2O3 · PbO) glasses

Glasses of the xNd₂O₃(1−x)(3Bi₂O₃ · PbO) system with 0?x?0.30 were obtained and studied by IR spectroscopy, X-ray photoelectron spectroscopy (XPS), density and magnetic susceptibility measurements. IR and density measurements show that the addition of neodymium ions produces structural changes and the neodymium ions play a network modifier role in the host glass matrix. XPS investigation permitted following the evolution of the structural disorder, of the degree of polymerization of bismuthate chains and of the fraction of bridging oxygens with respect to the neodymium ion concentration of the studied glasses. Magnetic susceptibility data show that the Nd³⁺ ions are present as isolated species for x?0.05 and as both isolated and exchange coupled species for higher x values.     

Structure of partially reduced xPbO (1 − x)SiO2 glasses: combined EXAFS and MD study

We have studied the structure of partially reduced lead-silicate glasses using combined EXAFS (extended X-ray absorption fine structure) and MD (molecular dynamics) methods. The analysis was performed for glasses of x[(1 − p)Pb pPbO] (1 − x)SiO₂ composition, x = 0.3, 0.5, 0.7, where parameter (1 − p) describes the degree of reduction, i.e. the content of the granular metallic phase, appearing as the result of the reduction process (e.g. annealing in hydrogen atmosphere). In the EXAFS experiment (1 − p) was expressed via the time of reduction realized at 400 °C (1.5 h, 24 h, 70 h), whereas in the MD simulations it was determined precisely by using proper numbers of particles (corresponding to (1 − p) = 0.0, 0.25, 0.5, 0.75 and 1.0). In the paper we describe in detail the local structure around lead atoms and its changes in the function of glass composition and reduction degree. The tendency for agglomeration of Pb⁰ into clusters, the formation of the granular metallic phase, and continuity of silica and lead oxide subnetworks are discussed. A good agreement between EXAFS-extractcd and MD-extracted parameters of the short-range structure encouraged us to preform a medium-range order analysis, based on the MD simulations only. Moreover, combining the EXAFS and MD methods we could correlate the reduction time (technological parameter) with the degree of reduction (1 − p) and the actual state of the granular structure. The latter relation may be useful for controlled production of reduced glasses of pre-requcstcd physical properties.