Br掺杂对石墨烯带隙影响的实验研究

石墨烯独特的结构和性能使其在纳米电子、半导体器件等领域成为研究的热点,但其零带隙的特性严重限制了其应用.采用化学气化沉积法制备了多层石墨烯,并使用溴蒸汽对制备的多层石墨烯进行掺杂,分析研究了溴蒸汽化学掺杂对石墨烯带隙的影响.为了对比溴蒸汽掺杂对石墨烯带隙的影响,使用633 nm He-Ne光分别测量了石墨烯掺杂前和掺杂后的拉曼光谱,根据拉曼光谱计算了石墨烯费米能级移动与掺杂溴蒸汽之间的关系.实验结果表明:溴蒸汽掺杂对石墨烯拉曼光谱G带产生影响;随着掺杂溴蒸汽体积的增加,拉曼光谱G带向高频移动并逐渐趋于稳定;G带和2D带强度比也迅速增加,并最终趋于稳定.费米能级的移动与G峰位置成线性关系,利用G峰峰值位置与费米能级实验关系式计算了溴掺杂后石墨烯的费米能级,分析了化学掺杂对石墨烯带隙的影响.     

Interplay of externally doped and thermally activated holes in La(2-x)Sr(x)CuO4 and their impact on the pseudogap crossover

We presented the recent Hall effect data for a number of carriers in La(2-x)Sr(x)CuO4 as the sum of two components: the temperature independent term n0(x), which is due to external doping, and the thermally activated contribution. Their balance determines the crossover temperature T*(x) from the marginal Fermi liquid to pseudogap regime. The activation energy Delta(x) for thermally excited carriers equals the energy between the Fermi surface "arc" and the band bottom, as seen in angle-resolved photoemission spectroscopy experiments. Other implications for the (T, x)-phase diagram of cuprates are also discussed.     

SryBa1－yFCl0.5Br0.5:Sm2+在光谱

本文对无机光谱烧孔系列材料SryBa1－yFCl0.5Br0.5:Sm2+中不同组份的样品(y=0,0.25.0.5,0.75.1.00)4f5d能带的激发光谱、不同温度下5D2、5D1、5D0→7F0跃迁的荧光衰减进行了测量,研究了组份的变化对4f5d能带的位置,5D2、5D1、5D0→7F0跃迁的几率和烧孔效率的影响,并得出结论:在该系列材料中,随组份y的增加,4f5d带与5DJ能级更加接近,5D0→7F0的电子跃迁几率增大,烧孔效率提高。     

Laser-induced etching of titanium by Br2 and CCl3Br at 248 nm

A quartz crystal microbalance (QCM) has been used to study the KrF* excimer laser-induced etching of titanium by bromine-containing compounds. The experiment consists of focusing the pulsed UV laser beam at normal incidence onto the surface of a quartz crystal coated with 1 m of polycrystalline titanium. The removal of titanium from the surface is monitored in real time by measuring the change in the frequency of the quartz crystal. The dependence of the etch rate on etchant pressure and laser fluence was measured and found to be consistent with a two-step etching mechanism. The initial step in the etching of titanium is reaction between the etchant and the surface to form the etch product between laser pulses. The etch product is subsequently removed from the surface during the laser pulse via a laser-induced thermal desorption process. The maximum etch rate obtained in this work was 6.2 Å-pulse^–1, indicating that between two and three atomic layers of Ti can be removed per laser pulse. The energy required for desorption of the etch product is calculated to be 172 kJ-mole^–1, which is consistent with the sublimation enthalpy of TiBr₂ (168 kJ-mole^–1). The proposed product in the etching of titanium by Br₂ and CCl₃Br is thus TiBr₂. In the etching of Ti by Br₂, formation of TiBr₂ proceeds predominantly through the dissociative chemisorption of Br₂. In the case of etching with CCl₃Br, TiBr₂ is formed via chemisorption of Br atoms produced in the gas-phase photodissociation of CCl₃Br.     

Characterization of the Ground State of Br(2) by Laser-Induced Fluorescence Fourier Transform Spectroscopy of the B(3)Pi(0(+))(u)-X(1)Sigma(+)(g) System

The laser-induced fluorescence (LIF) spectrum of the B(3)Pi(0(+))(u)-X(1)Sigma(+)(g) system of Br(2) was recorded by Fourier transform spectroscopy (FTS). The LIF spectra were obtained by using continuous-wave dye laser excitation in the spectral region 16 800-18 000 cm(-1). About 1800 rotationally resolved lines were recorded in 96 fluorescence progressions, originating from the 10 相似文献   

Electronic structure and optical properties of RbPb2Br5

We report on density functional theory (DFT) calculations of the total and partial densities of states of rubidium dilead pentabromide, RbPb₂Br₅, employing the augmented plane wave+local orbitals (APW+lo) method as incorporated in the WIEN2k package. The calculations indicate that the Pb 6s and Br 4p states are the dominant contributors to the valence band: their main contributions are found to occur at the bottom and at the top of the band, respectively. Our calculations reveal that the bottom of the conduction band is formed predominantly from contributions of the unoccupied Pb 6p states. Data of total DOS derived in the present DFT calculations are found to be in agreement with the experimental X-ray photoelectron valence-band spectrum of this compound. The predominant contributions of the Br 4p states at the top of the valence band of rubidium dilead pentabromide are confirmed by comparison on a common energy scale of the X-ray emission band representing the energy distribution of the valence Br p states and the X-ray photoelectron valence-band spectrum of the RbPb₂Br₅ single crystal. Main optical characteristics of RbPb₂Br₅, such as dispersion of the absorption coefficient, real and imaginary parts of dielectric function, electron energy-loss spectrum, refractive index, extinction coefficient and optical reflectivity are explored for RbPb₂Br₅ by the DFT calculations.     

RF-PECVD掺溴非晶碳氢膜的Raman光谱分析

在室温条件下,以溴乙烷为单体、氢气为载气,用13.56 MHz射频等离子体化学气相淀积方法(RF-PECVD)在硅片衬底上生长了掺溴非晶碳氢薄膜(a-C:Br:H).通过对其进行Raman光谱分析,研究了工作气压对薄膜结构的影响.结果显示:随着气体工作压力从20 Pa下降至5 Pa,样品D峰强度增强,I_D/I_G值逐步由1.18增加至1.36,G峰的位置向高频轻微移动;与此同时,薄膜生长方式逐步转为低能态形式生长,薄膜中sp~2C逐步由链式结构向环式结构转化.     

Image-potential surface states on Ag(100): A reinvestigation

Employing inverse photoemission we have remeasured the energy dispersionE(k) of the lowest-lying image state on Ag(100) with improved energy resolution (electrons and photons, E=0.35 eV) andk-resolution (k<0.1 Å^–1). In a least-square fit with the binding energyE _B atk=0 and the effective massm ^* as parameters we obtainE _B =E _vac –0.67 eV andm ^*=1.5 m in agreement with our earlier findings but differing from the two-photon photoemission values (0.53 eV and 1.15 m).     

Optical properties of the alkaline-earth fluorohalides matlockite-type structure SrFX (X=Cl, Br, I) compounds

The optical properties of the SrFX (X=Cl, Br, I) compound have been reported using the full potential linearized augmented plane wave (FP-LAPW) method as implemented in the WIEN2K code. We employed the generalized gradient approximation (GGA), which is based on exchange-correlation energy optimization to calculate the total energy. Also we have used the Engel-Vosko GGA formalism, which optimizes the corresponding potential for band structure calculations. Our calculations show that the valence band maximum (VBM) and conduction band minimum (CBM) are located at Γ resulting in a direct energy gap. We present calculations of the frequency-dependent complex dielectric function ε(ω) and its zero-frequency limit ε₁(0). We find that the value of ε₁(0) increases on decreasing the energy gap. The reflectivity spectra and absorption coefficient have been calculated and compared with the available experimental data.     

First-principles study of the optical properties of PbFX (X = Cl,Br, I) compounds in its matlockite-type structure

We present the results of the ab initio theoretical study of the optical properties for PbFX (X = Cl, Br, I) compounds in its matlockite-type structure using the full potential linearized augmented plane wave (FP-LAPW) method as implemented in the WIEN2K code. We employed generalized gradient approximation (GGA), which is based on exchange-correlation energy optimization to calculate the total energy. Also we have used the Engel-Vosko GGA formalism, which optimizes the corresponding potential for band structure calculations. Our calculations show that the valence band maximum (VBM) and conduction band minimum (CBM) are located at Z resulting in a direct energy gap. We present calculations of the frequency-dependent complex dielectric function ε( ω) and its zero-frequency limit ε₁ ( 0 ). We find that the values of ε₁ ( 0 ) increases with decreasing the energy gap. The reflectivity spectra and absorption coefficient has been calculated and compared with the available experimental data. The optical properties are analyzed and the origin of some of the peaks in the spectra is discussed in terms of the calculated electronic structure.     

Dynamical properties of the one-dimensional band insulator (NbSe4)3I

Optical and photoemission experiments reveal unexpected spectral signatures of one-dimensional band insulators. In the model compound (NbSe (4))3I the optical conductivity decays as a power law sigma(1)(omega) approximately omega(-4.25) above a sharp gap edge. Photoemission observes both the valence and a shadow band, produced by a commensurate superstructure. We identify an optical and photoemission band gap consistent with other measurements but much smaller than the energy scale defined by the dispersion of the band peak in the photoemission spectra.     

Effect of deuteration on the electronic and electron-vibrational properties of the organic conductor k-(D8-BEDT-TTF)2[Hg(SCN)2Br]

We present here for the first time polarized reflection spectra and optical conductivity spectra of single crystals of the newly deuterated organic conductor k-(D₈-BEDT-TTF)₂[Hg(SCN)₂Br] at room temperature. The spectral region investigated is 700–40 000 cm⁻¹. We examined the effect of deuteration on electronic and electron-vibrational transitions observed in the spectra. The observed shift of the electron “dimer” transition in the infrared toward lower frequencies upon deuteration is linked with an increase in the interaction between neighboring, mutually perpendicular dimers in the structure of the deuterated crystal. A lowering of the symmetry of the BEDT-TTF molecule is demonstrated in crystals similar to k-(BEDT-TTF)₂[Hg(SCN)₂Br], relative to the symmetry D _2h of the free molecule. We refine the assignment of the spectral features determined by the interaction of electrons with the fully-symmetric intramolecular vibrations of the C=C, C-S, and C-C-H bonds of the BEDT-TTF molecule. Fiz. Tverd. Tela (St. Petersburg) 40, 1595–1598 (September 1998)     

Isotope fractionation in aqua-gas systems: Cl(2)-HCl-Cl(-), Br(2)-HBr-Br(-) and H(2)S-S(2-)

We report calculated values of isotope fractionation factors between chlorine, bromine and sulphide hydrated anions and respective gaseous compounds: hydrogen chloride, hydrogen bromide, molecular chlorine and bromine and hydrogen sulphide. For the calculation of the reduced partition function ratios (β-factors) of hydrated Cl(-), Br(-) and S(2-) anions, we used a model of a cluster composed of the considered ion surrounded by two shells of H(2)O molecules. Only the electrostatic interaction between ion and water molecules treated as electric dipoles was taken into account. The β-factors for the gaseous compounds (HCl, Cl(2), HBr, Br(2) and H(2)S) were calculated from vibrational frequencies reported by Urey and Greiff [Isotopic Exchange Equilibria, J. Am. Chem. Soc. 57, 321 (1935)] and Schauble et al. [Theoretical Estimates Equilibrium Chlorine-Isotope Fractionation, Geochim. Cosmochim. Acta 67, 3267 (2003)]. Low-temperature isotope fractionation between chlorine-hydrated anion and hydrogen chloride attains 1.55-1.68‰ (this work), which is in good agreement with experimental data (1.4-1.8‰) [Z.D. Sharp, J.D. Barnes, T.P. Fischer and M. Halick, An Experimental Determination of Chlorine Isotope Fractionation in Acid Systems and Applications to Volcanic Fumaroles, Geochim. Cosmochim. Acta 74, 264 (2010)]. The predicted isotope fractionations for hydrated bromine and HBr, Br(2) gases are very small, 1000?ln α, do not exceed 0.8‰; thus, the expected variations of bromine isotope composition in aqua-gas systems will require enhanced precision for their detection. In contrast, the sulphur isotope fractionation between H(2)S( gas ) and S(2-) attains 6.0‰ at room temperature and drops nearly linearly to 3.1‰ at 350°C.     

晶体NiX2(X=Cl,Br,I)的光谱和电子顺磁共振谱研究

在强场耦合图像中,采用双自旋-轨道耦合(SO)参量模型建立了过渡族3d2(3d8)离子的三角对称下全组态光谱能级和电子顺磁共振(EPR)公式.与经典的晶体场理论(仅考虑中心金属离子的自旋-轨道耦合作用)相比较,该公式还包括了配体离子的自旋-轨道耦合作用的贡献,这一模型在应用于计算共价性较强的晶体光谱和电子顺磁共振谱可得到合理的结果.作为验证,用完全对角化方法研究了品体NiX2(X=Cl,Br,I)的光谱和电子顺磁共振谱,结果表明,理论与实验很好地符合.建立的全组态谱能级和电子顺磁共振公式为更精确地计算光谱和电子顺磁共振谱提供了一条可行方法.     

Excitation of 2D plasmons in a Cs/W(110) system

The evolution of surface photoemission spectra was investigated for a Cs/W(110) system with metastable Cs coatings larger than a monolayer. It is demonstrated that 2D plasmons can be detected by threshold photoemission spectroscopy. Three photoemission peaks were observed, whose dependence on the Cs adsorption dose showed a complicated behavior. The peaks may be due to the photoinduced excitation of a plasmon in quasi-2D Cs clusters, a surface Cs plasmon, or an interface Cs-W plasmon.     

(2+1)维光学孤子在饱和非线性介质中的模式特征

从非线性Schrdinger方程出发,应用数学解析的方法,详细讨论了在饱和非线性介质中(2+1)维空间光学孤子存在满足物理意义的自洽解的条件,给出数值计算所需要的边界条件。通过数值计算,给出了基模和一阶模在某一组参数下的部分模式的光场慢变包络、光强度的二维和三维分布的直观图形,以及相应能量(无量纲)。结果表明,孤子的存在不是任意的,而是依赖于一定的能量。当光脉冲能量不足以支持孤子的存在时,其解呈振荡形式,说明不存在孤子解。同时还给出介质的饱和参数、孤子在传播方向上的波矢k对孤子模式的影响等有意义的结论。     

Fabrication of Br doped ZnO nanosheets piezoelectric nanogenerator for pressure and position sensing applications

In this research, a unique strategy was developed to enhance the output performance of 2D ZnO nanosheets based piezoelectric nanogenerator (PENG). The Br doped 2D ZnO nanosheets were fabricated by facile hydrothermal method on nanoporous anodic aluminum oxide (AAO) template. Along with structural and optical characterization of Br doped 2D ZnO nanosheets, the electrical output performance of Br doped 2D ZnO PENG was demonstrated under external mechanical force. The corresponding output voltage of Br doped 2D ZnO nanosheets PENG reached to 8.82 V at 6HZ, which is 3 times higher than undoped ZnO nanosheets PENG. The output power density of Br doped 2D ZnO nanosheets PENG reached to 38.8962μWcm⁻² at an external load resistanec of about 2 MΩ. The Br doping in ZnO nanosheets significantly increased the sensitivity of PENG for pressure sensing and the flexibility of PENG contribute in the application of position sensing.     

1-(2-吡啶偶氮)-2-萘酚薄膜的非线性光学特性研究

运用Ｚ扫描方法研究了１－（２－吡啶偶氮）－２－萘酚薄膜的非线性光学特性。用皮秒脉冲激光测得在５３２ ｎｍ 处、光强较低时χ（３）Ｒ ＝ １．２９×１０－ ９ ｅｓｕ, β＝ ４２ ｃｍ ／ＧＷ; 同时研究了不同光脉冲能量时的非线性吸收特性, 发现其非线性吸收随着光强的增大由反饱和吸收转为饱和吸收     

High-resolution photoemission study of MgB2

We have performed high-resolution photoemission spectroscopy on MgB2 and observed opening of a superconducting gap with a narrow coherent peak. We found that the superconducting gap is s like with the gap value ( Delta) of 4.5+/-0.3 meV at 15 K. The temperature dependence (15-40 K) of the gap value follows well the BCS form, suggesting that 2Delta/k(B)T(c) at T = 0 is about 3. No pseudogap behavior is observed in the normal state. The present results strongly suggest that MgB2 is categorized into a phonon-mediated BCS superconductor in the weak-coupling regime.