Syntheses, spectroscopic characterization and metal ion binding properties of benzo-15-crown-5 derivatives and their sodium and nickel(II) complexes

New benzo-15-crown-5 derivatives containing nitro, amine and imine groups were prepared. Nitro compound (1) was prepared after the reaction?4′,5′-bis(bromethyl)benzo-15-crown-5 and o-nitrophenol in the presence of NaOH. After reduction process by using hydrazine hydrate and Pd/C amine compound (2) was formed. New crown ether imine compounds (3–5) were synthesized by the condensation of corresponding crown ether diamine (2) with salicylaldehyde derivatives. Sodium complexes of the crown compounds (1a–5a) form crystalline 1:1 (Na⁺: ligand) complexes with sodium perchlorate. Nickel(II) complexes (3b–5b) with 1:1 (Ni²⁺:ligand) stoichiometries were also been synthesized from the Schiff bases (3–5). The results indicated that the Schiff base ligands coordinated through the azomethine nitrogen and phenolic oxygen. The extraction ability of compounds (1, 3, 4 and 5) were also evaluated in chloroform by using several alkali and transition metal picrates such as Li⁺, Na⁺, K⁺, Cr³⁺, Mn²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Pb²⁺.     

Crescent aromatic oligothioamides as highly selective receptors for copper(Ⅱ) ion

A series of crescent aromatic oligothioamides(4, 6, 8, 15, and 18) bearing different number of sulfur atoms were designed and synthesized via thionation of their corresponding aromatic oligoamides(3, 5, and 7) using Lawesson's reagent. The X-ray structure of a trimeric analogue(13) revealed the presence of intramolecular three-center hydrogen bonds that are responsible for the rigidification of the molecular backbone. The extraction by these novel receptors toward some representative heavy metal cations(Zn2+, Cd2+, Co2+, Ni2+, Pb2+, and Cu2+) and alkali and alkaline earth metal cations(Li+, Na+, K+, Rb+, Cs+, Ca2+, and Sr2+) demonstrated high efficiency(83.5%–96.4%) and superior selectivity for Cu2+ over other selected metal cations. Particularly, the extractability was correlated to both the number of sulfur atoms and orientation of thiocarbonyl groups as revealed in the order: 6 4 18 15. This is in stark contrast to the oligoamides that only gave much lower extractability(5.9%–16.4%), suggestive of the importance of replacement of carbonyl oxygen atoms with sulfur atoms in the extraction of Cu2+. The complexation behavior of 4, 6, and 8 with Cu2+ was also examined by UV-Vis and NMR techniques.     

Synthesis and crystal structure characterization of iron(II), cobalt(II) and nickel(II) complexes with 1,3-bis(2-pyridylmethylthio)propane

Three new mononuclear complexes of nitrogen–sulfur donor sets, formulated as [Fe^II(L)Cl₂] (1), [Co^II(L)Cl₂] (2) and [Ni^II(L)Cl₂] (3) where L = 1,3-bis(2-pyridylmethylthio)propane, were synthesized and isolated in their pure form. All the complexes were characterized by physicochemical and spectroscopic methods. The solid state structures of complexes 1 and 3 have been established by single crystal X-ray crystallography. The structural analysis evidences isomorphous crystals with the metal ion in a distorted octahedral geometry that comprises NSSN ligand donors with trans located pyridine rings and chlorides in cis positions. In dimethylformamide solution, the complexes were found to exhibit Fe^II/Fe^III, Co^II/Co^III and Ni^II/Ni^III quasi-reversible redox couples in cyclic voltammograms with E_1/2 values (versus Ag/AgCl at 298 K) of +0.295, +0.795 and +0.745 V for 1, 2 and 3, respectively.     

Fluorescent chemosensor for Cu2+ ion based on iminoanthryl appended calix[4]arene

Calix[4]arene based podands 1a of cone conformation and 1b of 1,3-alternate conformation possessing imine units and bearing anthracene moieties have been synthesized by a 1 + 2 Schiff base condensation in good yields and examined for their cation recognition abilities towards cations such as lithium, sodium, potassium, nickel, cadmium, copper, zinc, lead, silver and mercury ions by UV–vis and fluorescence spectroscopy. The calix[4]arene derivative 1b shows a selective fluorescence enhancement in presence of Cu²⁺ ions among the various metal ions tested (Li⁺, Na⁺, K⁺, Ni²⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Ag⁺ and Hg²⁺ ions). The colour of the solution changes from colourless to light yellow in the presence of Cu²⁺ ions. The stoichiometry of the complex formed between 1b and Cu²⁺ was found to be 1:1 as established by Job’s plot.     

Tansition metal complexes with 2-(1-(carboxymethyl)-2-methyl-1H-benzimidazol-3-ium-3-yl)acetate (HL): Synthesis and crystal structure of [Co(L)2(H2O)4] · 6H2O and [Cu(L)2(H2O)2] · 4H2O

Transition metal complexes of 2-(1-(carboxymethyl)-2-methyl-1H-benzimidazol-3-ium-3-yl)acetate (HL), namely [Co(L)₂(H₂O)₄] · 6H₂O (I) and [Cu(L)₂(H₂O)₂] · 4H₂O (II), have been synthesized by a hydrothermal procedure and characterized by X-ray crystallography, CIF files CCDC nos. 1007524 (I), 1007525 (II). Both I and II are mononuclear molecules. In I, the Co²⁺ ion is in octahedral coordiantion environment and surrounded by four O atoms from water molecules and two carboxylate O atoms of two deprotonated ligand (L^?) occupied six culmination. While in II, the Cu²⁺ ion is located in a square-planar geometry, bounded to two aqua O atoms and two carboxylate O atoms from L^?.     

A New Phosphorescent Cyclometalated Iridium(III) Complex for the Selective Detection of Silver(I) Ion

A new cyclometalated iridium(III) complex, Ir(ppz)₂(dtp) (Ir1) (ppzH = 4-phenylphthalazinone, dtp = diethyl dithiophosphate), has been synthesized and characterized by single-crystal X-ray diffraction. The photoluminescence spectrum of Ir1 shows an emission maximum at 597 nm and its quantum yield is ca. 0.072. Complex Ir1 exhibits a strong and fast decrease of emission upon addition of Ag⁺ in aqueous media. The ratio of Ir1 responding to Ag⁺ was determined to be 1:1 by UV?CVis absorption and phosphorescent emission measurements. Complex Ir1 is a highly selective chemosensor for Ag⁺ over other transition metal ions.     

Synthesis and metal extraction studies of a novel chromogenic 5,17-bisazocalix[4]arenes

Three novel chromogenic cone azocalix[4]arenes 5a–c, which have cavity and the azo groups as metal-binding sites and as coloration sites were synthesized. They were studied by the liquid–liquid extraction of selected metal cations (Sr²⁺, Ag⁺, Hg⁺, Hg²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cr³⁺, Al³⁺). Through examination of the extraction, a novel selectivity of these compounds toward Hg²⁺ cations has been determined. Besides, it has been also found that azocalix[4]arene 5c is highly sensitive to acid–base titration, which can be detected by the naked eye.     

Syntheses, spectroscopic and structural characterizations and metal ion binding properties of Schiff bases derived from 4′-aminobenzo-15-crown-5

A series of benzyloxybenzaldehyde derivatives (1-4) were synthesized by the reactions of 4-(bromomethyl)benzonitrile with 4-hydroxy-3-methoxybenzaldehyde (vanillin), 2-hydroxy-3-methoxybenzaldehyde (o-vanillin), 2-hydroxy-4-methoxybenzaldehyde and 2-hydroxy-5-methoxybenzaldehyde. Condensation reactions among the new benzyloxybenzaldehyde derivatives (1-4) with 4′-aminobenzo-15-crown-5 yielded the new Schiff base compounds (5-8). Sodium complexes (5a-8a) and potassium complexes (5b-8b) were prepared with NaClO₄ and KI, respectively. All of these synthesized compounds were characterized on the basis of FT-IR, ¹H and ¹³C NMR, mass spectrometry and elemental analyses data. The solid state structures of compounds 8 and 5a were determined by X-ray crystallography. The extraction abilities of compounds 5-8 were also evaluated in CH₂Cl₂ by using several main group and transition metal picrates, such as Na⁺, K⁺, Pb²⁺, Cr³⁺, Ni²⁺, Cu²⁺ and Zn²⁺.     

Synthesis, crystal structure and electrochemical behavior of tetranuclear transition metal clusters based on lacunary silicotungstates: [M4(H2O)2(SiW9O34)2]10− (M = Ni2+, Co2 +) and [Fe4(μ-O)2(μ-OH)2(SiW10O37)2]14−

Three tetranuclear transition metal clusters based on lacunary silicotungstates [M₄(H₂O)₂(SiW₉O₃₄)₂]^12? (M = Ni²⁺ (1), Co²⁺ (2)), and [Fe₄(μ-O)₂(μ-OH)₂(SiW₁₀O₃₇)₂]^14? (3) have been synthesized under ambient conditions and characterized by elemental analyses, IR, TG, cyclic voltammetry, and single-crystal X-ray diffraction. The polyoxoanions of 1 and 2 are isostructural, including a central rhomb-like {M₄O₁₆} (M = Ni, Co) cluster sandwiched by two trivacant {B-α-SiW₉} Keggin moieties. In the polyoxoanion of 3, two μ-OH and two μ-O bridges link with four Fe^III ions, forming an eight-membered ring. This [Fe₄(μ-OH)₂(μ-O)₂] aggregation is sandwiched by two bi-vacant {α-SiW₁₀} Keggin fragments. The electrochemical properties of the three compounds were investigated.     

Synthesis and metal extraction behavior of pyridine and 1,2,4-triazole substituted calix[4]arenes

Three series of heterocycle substituted calixarenes, derivatized at lower and upper rim, were synthesized and successfully evaluated for metal extraction towards alkali, alkaline, transition and heavy metal ions. The presence and placement of sulfur, heterocycle functionality at upper/lower rim played a crucial role toward the extractability and selectivity of metal ions. The lower rim substituted calixarenes have shown high extractability and poor selectivity. In contrast to this, upper rim substituted calixarenes exhibited good selectivity. Moreover, sulfur functionalized calixarenes have shown better selectivity for heavy metal ions than alkali and alkaline metal ions. Among upper rim substituted calixarenes, 17 and 18 were found to be suitable for Na⁺, K⁺ and Ag⁺, 19,13 for heavy metal ions i.e., Pb²⁺, Hg⁺, Hg²⁺ and Ag⁺, and 11,12 for Pb²⁺ and Ag⁺ only.     

Synthesis and structure of palladium complexes [Ph3PhCH2P]+[PdCl3(DMSO)]− · DMSO, [Ph4P]+[PdCl3(DMSO)]−, and [Ph4Sb(DMSO)]+[PdCl3(DMSO)]−

[Ph₃PhCH₂P]⁺[PdCl₃(DMSO)]^? · DMSO (I), [Ph₄P]⁺[PdCl₃(DMSO)]^? (II), and [Ph₄Sb(DMSO)]⁺[PdCl₃(DMSO)]^? (III) complexes have been synthesized via the reaction of palladium chloride with equimolar amounts of triphenylbenzylphosphonium chloride, tetraphenylphosphonium chloride, and tetraphenylstibonium chloride, respectively. According to X-ray diffraction data, the cations of complexes I (CPC = 104.90(8)°–111.61(9)°) and II (CPC = 105.12(10)°–111.46(10)°) have slightly distorted tetrahedral structures with P-C bond lengths of 1.786(2)–1.809(2) and 1.791(2)–1.799(2) Å, respectively. The antimony atom in the [Ph₄Sb(DMSO)]⁺ cation has a trigonal bipyramidal surrounding with the dimethyl sulfoxide (DMSO) oxygen atom in an axial position (Sb...O 2.567(2) Å). The palladium atoms in the square mononuclear anions of complexes I, II, and III are tetracoordinate, and Pd-Cl distances are 2.3101(5)–2.3104(5) Å, 2.2950(7)–2.2038(7) Å, and 2.2986(9)–2.3073(9) Å, respectively. The DMSO ligands are coordinated to the palladium atom through the sulfur atom (Pd-S, 2.2318(5) (I), 2.2383(6) (II), and 2.2410(9) Å (III)).     

Synthesis and cation complexation of calix[4]azacrowns and a spirobiscalix[4]azacrown

The synthesis and complexation properties of three new derivatives, one spirobiscalix[4]azacrown (1) and two calix[4]azacrown (2 and 3), are reported. Complexation studies of the three ligands toward transition and heavy metal cations have been carried out and monitored by UV absorption spectrophotometry in acetonitrile. Mononuclear complexes were detected for all complexes, whereas binuclear species (M₂L) were also formed in the case of ligand 1 with Cu²⁺ and Pb²⁺. The extraction properties of 1, 2 and 3 toward Cu²⁺, Zn²⁺, Pb²⁺, Ag²⁺ and Cd²⁺ are also reported. The results showed that complexation is the main factor affecting extraction with ligands 2 and 3, while with ligand 1 it is not.     

Cyanido-bridged one-dimensional systems assembled from [ReIVCl4(CN)2]2? and [MII(cyclam)]2+ (M = Ni, Cu) precursors

Three new cyanido-bridged heterometallic Re^IVNi^II and Re^IVCu^II one-dimensional systems were synthesized and extensively characterized both structurally and magnetically. Single-crystal X-ray diffraction analysis revealed that these compounds display a common topology, with chains composed of alternating [Re^IVCl₄(CN)₂]^2? and [M^II(cyclam)]²⁺ (M = Ni in 1, Cu in 2) or [Cu^II(N,N??-dimethylcyclam)]²⁺ (in 3) building units. Two different chain orientations with a tilt angle of ca. 51° to 55° are present in the crystal packing of these compounds. The magnetic susceptibility measurements suggest the presence of intrachain ferromagnetic interactions between the S = 3/2 Re^IV centers and the 3d metal ions: S = 1 Ni^II or S = 1/2 Cu^II. At low temperature, a three-dimensional ordered magnetic phase induced by interchain antiferromagnetic interactions (antiferromagnetic for 1 and 2; canted antiferromagnetic for 3) is detected for the three compounds.     

A study of metal chelation of dinucleotide analogs in the gas phase by fast-atom bombardment mass spectrometry

Fast-atom bombardment (FAB) mass spectrometry was used to investigate the interaction of proton and alkali metal ions with dinucleotide analogs such as T-n-T (T = thymine moiety, n = polyether chain, e.g., triethylene, tetraethylene, pentaethylene, and hexaethylene ether 1–4), A-n-T (A = adenine unit 5–8), and T-n-OMe (9–12) in 3-nitrobenzyl alcohol matrix. The [M + H]⁺ ion is the most abundant ion for the A-n-T series, whereas in 1–4 and 9–12 the (TC₂H₄)⁺ ion is the most abundant. Formation of [M + H -C₂H₄O]⁺ ions, a characteristic fragmentation of crown ethers under electron ionization, is observed for compounds 1–12 and is more pronounced in 6 and 7. An abundant [M ? H]^? ion is observed for all the compounds studied under negative ion FAB due to the presence of the (-CO-NH-CO-) group of thymine, an indication of existence of intramolecular H bonding. The FAB mass spectra of 1–12 with alkali metal ions (Li⁺, Na⁺, K⁺, Rb⁺, and Cs⁺) showed formation of abundant metal-coordinated ions ([M + Met]⁺ and [TC₂H₄ + Met]⁺). Compounds 3, 4, 6, 7, and 10–12 showed ions due to the substitution of the thymine moiety by a hydroxyl group ([M + Met ? 108]⁺, Met = metal ion). For compound 3 alone, substitution of two thymine groups ([M + Met - 216]⁺) was observed. Metastable ion studies were used to elucidate the structures of these potentially significant ions, and the ion formule were confirmed with high resolution measurements. Selectivity toward metal complexation with ligand size was seen in the T-n-T and A-n-T series and was even more pronounced in A-n-T series. These dinucleotide analogs fall in the following order of chelation of alkali metal ions, acyclic glymes < dinucleotide analogs (acyclic glymes substituted with nitrogen bases) < crown ethers, which places them in perspective as receptor models.     

Ferromagnetic interactions in EO-azido-bridged binuclear transition metal(II) systems: Syntheses, crystal structures and magnetostructural correlations

Three new isostructural binuclear transition metal complexes with azido ion and 1,2-bis(3-(pyridin-2-yl)-1H-pyrazol-1-yl)ethane (bppe), formulated as [M 2 (N 3 ) 2 (bppe) 2 ](ClO 4 ) 2 (M = Co, 1; Ni, 2; Cu, 3), were successfully synthesized. They were structurally and magnetically characterized. In 1-3, the double azido ions link two adjacent octahedral metal centers together in the end-to-on mode (EO), with the M-N EO -M angles of 99.41°, 100.24° and 99.80°, respectively. The co-ligand bppe acts as terminal ligand to saturate the remaining coordination sites. The magnetic properties of 1-3 have been investigated in the temperature range of 2-300 K. Fitting of the magnetic susceptibility data revealed the occurrence of the strong ferromagnetic interactions [J = 26.32 cm-1 (1), J = 38.23 cm-1 (2) and J = 139.83 cm-1 (3)]. Density functional theory calculations have been performed on 1-3 to provide a magneto-structural correlation of the ferromagnetic behavior.     

Three one-dimensional chains with bulky backbone carboxylate ligands: Syntheses,crystal structures,and luminescent properties

To explore the influence of bulky backbone on complexes, three Co(II) and Zn(II) complexes with phenanthrene-9-carboxylate (L¹), 9H-fluorene-9-carboxylate (L²) or biphenyl-4-carboxylate (L³) together with incorporating auxiliary bridging ligad 4,4′-bipyridine (4Bipy), were synthesized and characterized: [Co(L¹)₂(4Bipy)(H₂O)₂]_∞ (I), [Zn(L²)₂(4Bipy)_0.5(4Bipy)_0.5]_∞ (II), and [Zn₃(L³)₄(4Bipy)_0.5(4Bipy)_0.5(4Bipy)_0.5(OH)₂]_∞ (III). X-ray single-crystal diffraction analyses show that complexes I–III both assume one-dimensional (1D) structures by incorporating the bridging 4Bipy (CIF file CCDC nos. 942729 (I), 942727 (II), and 942733 III). In I, mononuclear six-coordinated Co²⁺ ions are linked into a 1D linear chain by 4Bipy. While in II, mononuclear four-coordinated Zn²⁺ ions are linked into a 1D zigzag chain by 4Bipy. But in III, because of the existence of OH^?, hexanuclear Zn(II) can be regarded as a node, then bridge adjacent hexanuclear Zn(II) nodes by almost parallelled three 4Bipy ligands into a 1D linear chain. Finally the 1D chains of I–III are further assembled into an overall three-dimensional (3D) framework via intermolecular H-bonding, π…π stacking, and/or C-H…π supramolecular interactions, respectively. The results indicate that, besides different metal ions Co²⁺ and Zn²⁺ or OH^? anions, the steric hindrance of backbone ligands play an important role in the formation of I–III. Moreover, the luminescent properties of corresponding ligands and their complexes were briefly investigated.     

Experimental and theoretical study on the complexation of Ca2+ with beauvericin

From extraction experiments and γ-activity measurements, the exchange extraction constant corresponding to the equilibrium Ca²⁺(aq) + 1·Sr²⁺(nb) ? 1·Ca²⁺(nb) + Sr²⁺(aq) taking place in the two-phase water–nitrobenzene system (1 = beauvericin; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K _ex(Ca²⁺, 1·Sr²⁺) = 1.1 ± 0.1. Further, the stability constant of the 1·Ca²⁺ complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log β _nb(1·Ca²⁺) = 10.1 ± 0.2. Finally, by using quantum mechanical density functional level of theory calculations, the most probable structures of the non-hydrated 1·Ca²⁺ and hydrated 1·Ca²⁺·H₂O complex species were predicted.     

Three different fluorescent responses to transition metal ions using receptors based on 1,2-bis- and 1,2,4,5-tetrakis-(8-hydroxyquinolinoxymethyl)benzene

The dipod 1,2-bis(8-hydroxyquinolinoxymethyl)benzene (3) and tetrapod 1,2,4,5-tetrakis(8-hydroxyquinolinoxymethyl)benzene (5) have been synthesized through nucleophilic substitution of respective 1,2-bis(bromomethyl)benzene (2) and 1,2,4,5-tetra(bromomethyl)benzene (4) with 8-hydroxyquinoline (1). For comparison, 1,3,5-tris(8-hydroxyquinolinoxymethyl)benzene derivatives (7a and 7b) have been obtained. The complexation behavior of these podands towards Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ metal ions has been investigated in acetonitrile by fluorescence spectroscopy. The sterically crowded 1,2,4,5-tetrapod 5 displays unique fluorescence ‘ON-OFF-ON’ switching through fluorescence quenching (λ_max 395 nm, switch OFF) with <1.0 equiv of Ag⁺ and fluorescence enhancement (λ_max 495 nm, switch ON) with >3 equiv Ag⁺ and can be used for estimation of two different concentrations of Ag⁺ at two different wavelengths. The addition of Cu²⁺, Ni²⁺, and Co²⁺ metal ions to tetrapod 5 causes fluorescence quenching, i.e., ‘ON-OFF’ phenomena at λ_max 395 nm for <10 μM (1 equiv) of these ions but addition of Zn²⁺ and Cd²⁺ to tetrapod 5 results in fluorescence enhancement with a gradual shift of λ_em from 395 to 432 and 418 nm, respectively. Similarly, dipod 3 behaves as an ‘ON-OFF-ON’ switch with Ag⁺, an ‘ON-OFF’ switch with Cu²⁺, and an ‘OFF-ON’ switch with Zn²⁺. The placement of quinolinoxymethyl groups at the 1,3,5-positions of benzene ring in tripod 7a-b leads to simultaneous fluorescence quenching at λ_max 380 nm and enhancement at λ_max 490 nm with both Ag⁺ and Cu²⁺. This behavior is in parallel with 8-methoxyquinoline 8. The rationalization of these results in terms of metal ion coordination and protonation of podands shows that 1,2 placement of quinoline units in tetrapod 5 and dipod 3 causes three different fluorescent responses, i.e., ‘ON-OFF-ON’, ‘ON-OFF’, and ‘OFF-ON’ due to metal ion coordination of different transition metal ions and 1, 3, and 5 placement of three quinolines in tripod 7, the protonation of quinolines is preferred over metal ion coordination. In general, the greater number of quinoline units coordinated per metal ion in 5 compared with the other podands points to organization of the four quinoline moieties around metal ions in the case of 5.     

Heterobimetallic dioxomolybdenum(VI) complexes derived from bis(2-hydroxy-1-naphthaldehyde)malonoyldihydrazone: Synthesis and characterization

The heterobimetallic complexes [MMoO₂(L)(H₂O)₂] (where M = Zn²⁺ (1), Cu²⁺ (2), and Co²⁺ (4)) and [{MMoO₃(H₂L)(H₂O)₂}₂] (where M = Ni²⁺ (3) and Mn²⁺ (5)) are synthesized from bis(2-hydroxy-1-naphthaldehyde)malonoyldihydrazone (H₄L) using the monometallic precursor complex [MoO₂(H₂L)]·H₂O in ethanol. The composition of the complexes is established based on the data obtained from the elemental analysis and molecular weight determinations. The structure of the complexes is discussed in the light of data obtained from molar conductance, magnetic moment, electronic, EPR and IR spectroscopic studies.     

A convenient synthesis of new thiaazacrown ethers and study of their complexation reactions with some transition metal cations in binary acetonitrile–chloroform mixture using the conductometric method

Three novel thiaazacrown ethers 1, 2 and 3 were synthesized in a simple way and in high yield. The complex formation between Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Hg²⁺ and Cd²⁺ metal cations with thiaazacrown ethers 1, 2 and 3 have been studied in acetonitrile:chloroform (1:1) binary solvent system using conductometric technique. The conductance data show that the stochiometry of the complexes with Ag⁺, Cu²⁺ and Zn²⁺ cations is 1:1 (L:M), but in the case of Pb²⁺ and Hg²⁺ cations, a 1:2 (L:M) complex is formed in solutions. The formation constants of the resulting 1:1 complexes were determined from the molar conductance-mole ratio data at 25 °C. It was found that the stability constants of 1-Ag²⁺, 2-Ag⁺ and 3-Ag⁺ complexes are higher than those of their corresponding Zn²⁺ and Cu²⁺ complexes and found to vary in order 3 > 1 > 2 for Ag⁺.