Controlled aggregation of functionalized gold nanoparticles with a novel conjugated oligomer.

A new route is developed to control the self-assembly of gold nanoparticles (AuNPs) functionalized with a novel pyridyl-ended porphyrin-oligo(p-phenylene vinylene) conjugated oligomer (P-OPV-Py) into branched-rods, chain-networks, uniform fractal-like Au clusters, and larger nanoparticles. The techniques of optical spectroscopy, transmission electron microscopy (TEM) and dynamic light scattering (DLS) are used to characterize the self-assembly in various solvent systems (pure toluene, CHCl(3)/toluene, THF/toluene and n-butanol/toluene). A combination of the ligand/AuNPs molar ratio and relative concentration serves as the driving force to control the size and shape of P-OPV-Py capped AuNPs.     

Rationally designed ligands that inhibit the aggregation of large gold nanoparticles in solution

Hexadecanethiol (n-C16), 2,2-dimethylhexadecane-1-thiol (DMC16), and the multidentate thiol-based ligands 2-tetradecylpropane-1,3-dithiol (C16C2), 2-methyl-2-tetradecylpropane-1,3-dithiol (C16C3), and 1,1,1-tris(mercaptomethyl)pentadecane (t-C16) were evaluated for their ability to stabilize large gold nanoparticles (>15 nm) in organic solution. Citrate-stabilized gold nanoparticles (20-50 nm) treated with the ligands were extracted from aqueous solution and dispersed into toluene. The degree of aggregation of the gold nanoparticles was monitored visually and further confirmed by UV-vis spectroscopy and dynamic light scattering (DLS). The bidentate ligands (C16C2 and C16C3) and particularly the tridentate ligand (t-C16) showed enhanced abilities to inhibit the aggregation of large gold nanoparticles in organic solution. For gold nanoparticles modified with these multidentate ligands, bound thiolate (S2p3/2 binding energy of 162 eV) was the predominant sulfur species (>85%) as evaluated by X-ray photoelectron spectroscopy (XPS). Although an entropy-based resistance to ordering of the loosely packed surfactant layers was initially considered to be a plausible mechanism for the enhanced stabilization afforded by the multidentate ligands, when taken as a whole, the data presented here support a model in which the enhanced stabilization arises largely (if not solely) from the multidentate chelate effect.     

Colloidal stability of gold nanoparticles modified with thiol compounds: bioconjugation and application in cancer cell imaging

Gold nanoparticles (GNPs) are attractive alternative optical probes and good biocompatible materials due to their special physical and chemical properties. However, GNPs have a tendency to aggregate particularly in the presence of high salts and certain biological molecules such as nucleic acids and proteins. How to improve the stability of GNPs and their bioconjugates in aqueous solution is a critical issue in bioapplications. In this study, we first synthesized 17 nm GNPs in aqueous solution and then modified them with six thiol compounds, including glutathione, mercaptopropionic acid (MPA), cysteine, cystamine, dihydrolipoic acid, and thiol-ending polyethylene glycol (PEG-SH), via a Au-S bond. We systematically investigated the effects of the thiol ligands, buffer pH, and salt concentrations of the solutions on the colloidal stability of GNPs using UV-vis absorption spectroscopy. We found that GNPs modified with PEG-SH were the most stable in aqueous solution compared to other thiol compounds. On the basis of the above results, we developed a simple and efficient approach for modification of GNPs using a mixture of PEG-SH and MPA as ligands. These biligand-modified GNPs were facilely conjugated to antibody using 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide and N-hydroxysulfosuccinimide as linkage reagents. We conjugated GNPs to epidermal growth factor receptor antibodies and successfully used the antibody-GNP conjugates as targeting probes for imaging of cancer cells using the illumination of a dark field. Compared to current methods for modification and conjugation of GNPs, our method described here is simple, has a low cost, and has potential applications in bioassays and cancer diagnostics and studies.     

Site-selective immobilization of gold nanoparticles functionalized with DNA oligomers

The organization of metal and semiconductor nanoparticles to form micro- and nanostructured assemblies is currently of tremendous interest. This communication reports on the utilization of DNA molecules as positioning elements for generating microstructured surface architecture from gold nanoparticles. Citrate-passivated 40 nm gold colloids were modified by chemisorptive coupling with a 5′-thiol-derivatized DNA oligomer. The nucleic acid was used as a molecular handle for the specific immobilization on solid supports, previously functionalized with capture DNA oligomers, complementary to the nanoparticle-bound DNA. As a consequence of the enormous specificity of nucleic acid hybridization, the DNA-directed immobilization (DDI) allows, to site-specifically target the hybrid nanoparticles to microlocations which contain the complementary oligomers. The site-selectivity of the surface adsorption is demonstrated by immobilizing the gold colloids on a DNA microarray on a glass cover slide. Moreover, scanning force microscopy (SFM) analysis, used to characterize the intermediate steps of the DDI on a gold substrate, provided initial insights into the specificity and efficiency of this technique. The application of the DDI to fabricate complex colloidal micro- and nanostructures is anticipated. Received: 26 July 2000/Accepted: 5 October 2000     

Surface-grafted hybrid material consisting of gold nanoparticles and dextran exhibits mobility and reversible aggregation on a surface

Gold nanoparticles linked to linear carboxylated dextran chains were attached to 3-aminopropyltriethoxysilane-functionalized glass surfaces. This method provides novel hybrid nanostructures on a surface with the unique optical properties of gold nanoparticles. The particles attached to the surface retain the capability to aggregate and disaggregate in response to their environment. This procedure presents an alternative method to the immobilization of gold nanoparticles onto planar substrates. Compared to gold nanoparticle monolayers, larger particle surface densities were obtained. Exposure to hydrophobic environments changes the conformation of the hydrophilic dextran chains, causing the gold nanoparticles to aggregate and inducing changes in the absorption spectrum such as red-shifting and broadening of the plasmon absorption peaks. These changes, characteristic of particle aggregation, are reversible. When the substrates are dried and then immersed in an aqueous environment, these changes can be visually observed in a reversible fashion and the sample changes color from the red color of colloidal gold to a bluish-purple color of aggregated nanoparticles. Surface-bound nanoparticles that retain their mobility when attached to a surface by means of a flexible polymer chain could expand the use of aggregation-based assays to solid substrates.     

Stoichiometric functionalization of gold nanoparticles in solution through a free radical polymerization approach

A new simple concept for the stoichiometrical functionalization of nanoparticles based on free radical polymerization of vinyl protected nanoparticles is presented. To demonstrate this concept 2-bis(4-vinylphenyl)disulfane was synthesized and used in the synthesis of gold nanoparticles, leading to 4-vinylthiophenol functionalized nanoparticles. Simple free radical polymerization of these particles initiated by 4,4'-azobis-(4-cyanopentanoic acid) delivered nanoparticles with a single carboxyl group. These monofunctionalized gold nanoparticles were utilized for chemical preparation of gold nanoparticle dimers as well as for construction of gold nanoparticle arrays via binding to polyallylamine.     

Structural study on gold nanoparticle functionalized with DNA and its non-cross-linking aggregation

Hybridization of DNA tethered on colloidal nanoparticles with fully matched complementary one induces the aggregation of the particles in a non-cross-linking configuration. Here, we performed a structural study on DNA-functionalized gold nanoparticle and its non-cross-linking aggregation mainly using synchrotron radiation small-angle X-ray scattering. To understand the non-cross-linking aggregation, the nanoparticles with various DNA lengths and core sizes were used. In the aggregation, the surface distance between the gold nanoparticles increased with the length of DNA duplex, although the increment of the distance per base pair was not constant and showed the tendency to become small with increasing DNA length, meaning the interdigitation of DNA layers. The aggregation was also found to occur between the identical cores, without being affected by tethered DNA. Furthermore, it was proved that the relative increase in DNA length to core size leads to the increase in colloidal stability. Even the nanoparticles with full-matched DNA duplex were dispersed stably. These facts suggested that van der Waals interaction between core particles rather than end-to-end stacking between DNA duplexes is a dominant attractive interaction. The steric repulsion force arising from entropic loss of thermal fluctuation of DNA molecules might be a key factor to characterize the non-cross-linking aggregation.     

Simulation of styrene free radical polymerization over bi-functional initiators using Monte Carlo simulation method and comparison with mono-functional initiators

In the present study, based on a complete mechanism, a Monte Carlo simulation method is employed to investigate the kinetics of styrene free radical polymerization over bi-functional initiators in a bulk medium. The effects of the concentration of initiator and the monomer, of the temperature on monomer conversion, average molecular weights, polydispersity index, and molecular weight distribution are inspected and compared with mono-functional initiators. According to the simulation results, an increase in either the concentration of initiator or the temperature leads to the rise of the monomer conversion and to the reduction of the average molecular weights, while the increase of the monomer concentration results in the rise of both monomer conversion and molecular weights, which is in accord with predictions of the theory of free-radical polymerization. In addition, application of bi-functional initiators increases both monomer conversion and average molecular weight and results in narrower chain length distributions.     

Electrochemical and optical characterization of triarylamine functionalized gold nanoparticles

This paper describes the synthesis, structural analysis, and investigations of the optical and electrochemical properties of some gold nanoparticles (AuNPs) which consist of a triarylamine ligand shell attached to small gold cores (Au-Tara). The triarylamine chromophores were attached to small 4-bromobenzenethiol covered gold nanoparticles (ca. 2 nm in diameter) by Sonogashira reaction. This procedure yields triarylamine redox centers attached via π-conjugated bridging units of different length to the gold core. The AuNPs were analyzed with (1)H NMR spectroscopy, diffusion ordered NMR spectroscopy (DOSY), thermogravimetric analysis (TGA), and scanning transmission electron microscopy (STEM). Cyclic voltammetry (CV) technique was used to determine the composition of the redox active particles via the Randles-Sevcik equation. The optical and electrochemical properties of the Au-Tara nanoparticles and of their corresponding unbound ligands (Ref) were investigated with UV/vis/NIR absorption spectroscopy, Osteryoung square wave voltammetry (OSWV), and spectroelectrochemistry (SEC). These data show that the assembling of triarylamines in the vicinity of a gold nanoparticle can change the optical and electrochemical properties of the triarylamine redox chromophores depending on the kind and length of the bridging unit. This is due to gold core-chromophore and chromophore-chromophore interactions.     

Synthesis of tetraoctylammonium-protected gold nanoparticles with improved stability

This paper shows that an introduction of thiosulfate anions in place of bromide anions greatly improves both chemical and thermal stability of tetraoctylammonium-protected gold nanoparticles. Tetraoctylammonium thiosulfate [(Oct)4N+-O3SS]-protected gold nanoparticles are synthesized by the reduction of (Oct)4N+-AuCl4 to Au(I)-SSO3-, followed by the addition of sodium borohydride. The presence of thiosulfate anions instead of bromide anions on the surface of gold nanoparticles results in a significant dampening of the surface plasmon band of gold at 526 nm due to the strong interaction between thiosulfate and the gold nanoparticle surface. Cyanide decomposition and heating treatment studies suggest that (Oct)4N+-O3SS-protected nanoparticles have much higher overall stability compared to (Oct)4N+-Br-protected gold nanoparticles.     

Nanostructures of functionalized gold nanoparticles prepared by particle lithography with organosilanes

Periodic arrays of organosilane nanostructures were prepared with particle lithography to define sites for selective adsorption of functionalized gold nanoparticles. Essentially, the approach for nanoparticle lithography consists of procedures with two masks. First, latex mesospheres were used as a surface mask for deposition of an organosilane vapor, to produce an array of holes within a covalently bonded, organic thin film. The latex particles were readily removed with solvent rinses to expose discrete patterns of nanosized holes of uncovered substrate. The nanostructured film of organosilanes was then used as a surface mask for a second patterning step, with immersion in a solution of functionalized nanoparticles. Patterned substrates were fully submerged in a solution of surface-active gold nanoparticles coated with 3-mercaptopropyltrimethoxysilane. Regularly shaped, nanoscopic areas of bare substrate produced by removal of the latex mask provided sites to bind silanol-terminated gold nanoparticles, and the methyl-terminated areas of the organosilane film served as an effective resist, preventing nonspecific adsorption on masked areas. Characterizations with atomic force microscopy demonstrate the steps for lithography with organosilanes and functionalized nanoparticles. Patterning was accomplished for both silicon and glass substrates, to generate nanostructures with periodicities of 200-300 nm that match the diameters of the latex mesospheres of the surface masks. Nanoparticles were shown to bind selectively to uncovered, exposed areas of the substrate and did not attach to the methyl-terminal groups of the organosilane mask. Billions of well-defined nanostructures of nanoparticles can be generated using this high-throughput approach of particle lithography, with exquisite control of surface density and periodicity at the nanoscale.     

Chiral recognition in aggregation of gold nanoparticles grafted with helicenes

Chiral recognition was observed in the interactions of gold nanoparticles grafted with (±)-, (M)-, and (P)-helicenethiol. Although the nanoparticles contain equal enantiomeric excess, a 1:1 mixture of (M)- and (P)-nanoparticles aggregated more rapidly in solution than (±)-nanoparticles.     

On the interactions of free radicals with gold nanoparticles

Electron paramagnetic resonance (EPR) spectroscopy was used to study the interactions between stable free radicals and gold nanoparticles. The nitroxyl free radicals used were TEMPO, TEMPAMINE, and TEMPONE. Two sizes of Au particles, 15 and 2.5 nm in diameter, were synthesized to investigate the interactions with the metallic particles. We find that the EPR signal is reduced upon adsorption of the radicals onto the 15 nm Au particle surface. Despite the strong adsorption of TEMPAMINE on the particles, the signal intensity recovers upon the introduction of a high concentration of ethanolamine to the solution. The signal reduction was proportional to the concentration of Au particles, and the signal totally disappeared at high concentrations of Au particles. Possible explanations of the signal reduction are discussed in this Article. We propose that the reduction in signal intensity arises from exchange interactions between the unpaired electrons of the adsorbed radicals and conduction-band electrons of the metallic particles. In addition, in the presence of oxygen, the adsorbed TEMPAMINE radicals are catalytically oxidized to the carbonyl derivative, TEMPONE. A mechanism for this unexpected catalytic reaction is proposed.     

Colloidal AgCl induced-growth of thorny gold nanoparticles and their SERS activity

In this paper, we exploited a unique procedure for obtaining thorny gold nanoparticles (Au NPs) with controllable length of thorns without using seeds and surfactants. The obtained Au NPs exhibited shape-determined surface-enhanced Raman spectroscopy activity toward rhodamine 6G.     

Label free colorimetric sensing of thiocyanate based on inducing aggregation of Tween 20-stabilized gold nanoparticles

Based on inducing the aggregation of gold nanoparticles (AuNPs), a simple colorimetric method with high sensitivity and selectivity was developed for the sensing of thiocyanate (SCN(-)) in aqueous solutions. Citrate-capped AuNPs were prepared following a classic method and Tween 20 was subsequently added as a stabilizer. With the addition of SCN(-), citrate ions on AuNPs surfaces were replaced due to the high affinity between SCN(-) and Au. As a result, Tween 20 molecules adsorbed on the AuNPs surfaces were separated and the AuNPs aggregated. The process was accompanied by a visible color change from red to blue within 5 min. The sensing of SCN(-) can therefore be easily achieved by a UV-vis spectrophotometer or even by the naked eye. The potential effects of relevant experimental conditions, including concentration of Tween 20, pH, incubation temperature and time, were evaluated to optimize the method. Under optimized conditions, this method yields excellent sensitivity (LOD = 0.2 μM or 11.6 ppb) and selectivity toward SCN(-). Our attempt may provide a cost-effective, rapid and simple solution to the inspection of SCN(-) ions in saliva and environmental aqueous samples.     

Mechano-chemical stability of gold nanoparticles coated with alkanethiolate SAMs

Molecular dynamics simulations are used to probe the structure and stability of alkanethiolate self-assembled monolayers (SAMs) on gold nanoparticles. We observed that the surface of gold nanoparticles becomes highly corrugated by the adsorption of the SAMs. Furthermore, as the temperature is increased, the SAMs dissolve into the gold nanoparticle, creating a liquid mixture at temperatures much lower than the melting temperature of the gold nanoparticle. By analyzing the mechanical and chemical properties of gold nanoparticles at temperatures below the melting point of gold, with different SAM chain lengths and surface coverage properties, we determined that the system is metastable. The model and computational results that provide support for this hypothesis are presented.     

Synthesis of end‐functionalized poly(methyl methacrylate) by ruthenium‐catalyzed living radical polymerization with functionalized initiators

A series of functionalized 2‐bromoisobutyrates and 2‐chloro‐2‐phenylacetates led to α‐end‐functionalized poly(methyl methacrylate)s in Ru(II)‐catalyzed living radical polymerization; the terminal functions included amine, hydroxyl, and amide. These initiators were effective in the presence of additives such as Al(Oi‐Pr)₃ and n‐Bu₃N. The chlorophenylacetate initiators especially coupled with the amine additive gave polymers with well‐controlled molecular weights (M_w/M_n = 1.2–1.3) and high end functionality (F_n ～ 1.0). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1937–1944, 2002     

Naked eye sensing of melamine using rationally tailored gold nanoparticles: hydrogen-bonding and charge-transfer recognition

A highly sensitive analytical method based on Au nanoparticles rationally tailored with recognition elements uracil-5-carboxylic acid (UCA) and 2,4,6-trinitrobenzenesulfonic acid (TNBS) for the visual sensing of melamine at the parts-per-billion (ppb) level is described. The tailored Au nanoparticles function as an excellent color indicating reporter and it recognizes the target analytes by triple hydrogen-bonding or charge-transfer interaction in aqueous solution. The interaction of melamine with UCA- or TNBS-tailored reporters induces a rapid visible color change due to the aggregation of reporters. The color change was spectrally monitored to precisely quantify the amount of melamine. The charge-transfer interaction of melamine with TNBS-tailored reporter brings a remarkable change in the spectral signature even at the ppb level. Such an interaction paves the way for the detection of melamine at the 5 ppb level, which is well below the safety limit set by UN food standard commission. This method is highly selective and the common interfering analytes such as cyanuric acid, cytosine, glucose, thymine, uracil, etc., do not interfere in the sensing of melamine. The practical utility of the method is demonstrated by quantifying the amount melamine in real samples.