Gold Ion–Angiotensin Peptide Interaction by Mass Spectrometry

Stimulated by the interest in developing gold compounds for treating cancer, gold ion–angiotensin peptide interactions are investigated by mass spectrometry. Under the experimental conditions used, the majority of gold ion–angiotensin peptide complexes contain gold in the oxidation states I and III. Both ESI-MS and MALDI-TOF MS detect singly/multiply charged ions for mononuclear/multinuclear gold-attached peptides, which are represented as [peptide + a Au(I) + b Au(III) + (e - a -3b) H]^e+, where a,b ≥ 0 and e is charge. ESI-MS data shows singly/multiply charged ions of Au(I)-peptide and Au(III)-peptide complexes. This study reveals that MALDI-TOF MS mainly detects singly charged Au(I)-peptide complexes, presumably due to the ionization process. The electrons in the MALDI plume seem to efficiently reduce Au(III) to Au(I). MALDI also tends to enhance the higher polymeric forms of gold-peptide complexes regardless of the laser power used. Collision-induced dissociation experiments of the mononuclear and dinuclear gold-attached peptide ions for angiotensin peptides show that the gold ion (a soft acid) binding sites are in the vicinity of Cys (a soft ligand), His (a major anchor of peptide for metal ion chelation), and the basic residue Arg. Data also suggests that the abundance of gold-attached peptides increases with higher gold concentration until saturation, after which an increase in gold ion concentration leads to the aggregation and/or precipitation of gold-bound peptides.     

Inline pneumatically assisted atmospheric pressure matrix‐assisted laser desorption/ionization ion trap mass spectrometry

Atmospheric pressure (AP) matrix‐assisted laser desorption/ionization (MALDI) is known to suffer from poor ion transfer efficiencies as compared to conventional vacuum MALDI (vMALDI). To mitigate these issues, a new AP‐MALDI ion source utilizing a coaxial gas flow was developed. Nitrogen, helium, and sulfur hexafluoride were tested for their abilities as ion carriers for a standard peptide and small drug molecules. Nitrogen showed the best ion transport efficiency, with sensitivity gains of up to 1900% and 20% for a peptide standard when the target plate voltage was either continuous or pulsed, respectively. The addition of carrier gas not only entrained the ions efficiently but also deflected background species and declustered analyte–matrix adducts, resulting in higher absolute analyte signal intensities and greater signal‐to‐noise (S/N) ratios. With the increased sensitivity of pneumatically assisted (PA) AP‐MALDI, the limits of detection of angiotensin I were 20 or 3 fmols for continuous or pulsed target plate voltage, respectively. For analyzing low‐mass analytes, it was found that very low gas flow rates (0.3–0.6 l min^?1) were preferable owing to increased fragmentation at higher gas flows. The analyte lability, type of gas, and nature of the extraction field between the target plate and mass spectrometer inlet were observed to be the most important factors affecting the performance of the in‐line PA‐AP‐MALDI ion source. Copyright © 2010 John Wiley & Sons, Ltd.     

Towards the development of an immuno MALDI (iMALDI) mass spectrometry assay for the diagnosis of hypertension

The renin-angiotensin-aldosterone system (RAAS) plays an essential role in the regulation of plasma volume and arterial blood pressure. One of the most common diseases of the RAAS is the autonomous production of aldosterone by the adrenal glands, caused by either bilateral adrenal hyperplasia or an aldosterone-producing adenoma. This condition, known as primary aldosteronism, is a treatable and often curable form of hypertension. The measurement of plasma renin activity (PRA), as determined by radioimmunoassay for angiotensin I is essential to the diagnosis of primary aldosteronism. However, accurate determination of PRA is often hampered by low plasma concentrations of angiotensin I. Here, we report the use of immuno-MALDI (iMALDI) as a highly sensitive and specific method for the absolute quantitation of angiotensin I in plasma. iMALDI permits concentration determination by affinity-capture of angiotensin I and a stable-isotopically labeled standard (SIS) peptide on immobilized anti-peptide antibodies. The affinity beads are placed on the MALDI target, permitting automated analysis of large numbers of patient samples. Pretreatment of the plasma is not required, and this method is suitable for the accurate determination of angiotensin I in whole plasma. The calibration curve generated using this method was linear over a 50-fold concentration range in plasma, with a correlation coefficient of 0.984. MS/MS sequence confirmation provides absolute specificity. The iMALDI angiotensin I assay, therefore, has the potential to be developed into a method for determining PRA that has advantages in time, in specificity, and in safety.     

Characterization of [peptide+(Ag)n]+ complexes using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Silver ion complexes of peptides [M + (Ag)_n]⁺, M = angiotensin I or substance P where n = 1–8 and 17–23 for angiotensin I and n = 1–5 for substance P, are identified and characterized using matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOFMS). The Ag⁺ coordination number exceeds the number of available amino acid residues in angiotensin I whereas the number of observed complexes in substance P is less than the number of amino acid residues in it. The larger coordination number of angiotensin I with Ag⁺ indicates the simultaneous binding of several Ag⁺ ions to the amino acid residue present in it. The lower number of observed complexes in substance P suggests the binding of two or more residues to one Ag⁺ ion. The presence of trifluoroacetic acid in the peptide samples reduces the Ag⁺ coordination ability in both the peptides which indicates that the basic residues in it are already protonated and do not participate in the Ag⁺‐binding process. The Ag⁺ ion also forms a complex with the α‐cyano‐4‐hydroxycinnamic acid (CHCA) matrix and is observed in the MALDI mass spectra and the formation of [CHCA + Ag]⁺, [CHCA + AgNO₃]⁺ and [(CHCA)₂ + Ag]⁺ ions is due to the high binding affinity of Ag⁺ to the CN group of CHCA. Copyright © 2010 John Wiley & Sons, Ltd.     

Investigation of tyrosine nitration in proteins by mass spectrometry.

In vivo nitration of tyrosine residues is a post-translational modification mediated by peroxynitrite that may be involved in a number of diseases. The aim of this study was to evaluate possibilities for site-specific detection of tyrosine nitration by mass spectrometry. Angiotensin II and bovine serum albumin (BSA) nitrated with tetranitromethane (TNM) were used as model compounds. Three strategies were investigated: (i) analysis of single peptides and protein digests by matrix-assisted laser desorption/ionization (MALDI) peptide mass mapping, (ii) peptide mass mapping by electrospray ionization (ESI) mass spectrometry and (iii) screening for nitration by selective detection of the immonium ion of nitrotyrosine by precursor ion scanning with subsequent sequencing of the modified peptides. The MALDI time-of-flight mass spectrum of nitrated angiotensin II showed an unexpected prompt fragmentation involving the nitro group, in contrast to ESI-MS, where no fragmentation of nitrated angiotensin II was observed. The ESI mass spectra showed that mono- and dinitrated angiotensin II were obtained after treatment with TNM. ESI-MS/MS revealed that the mononitrated angiotensin II was nitrated on the side-chain of tyrosine. The dinitrated angiotensin II contained two nitro groups on the tyrosine residue. Nitration of BSA was confirmed by Western blotting with an antibody against nitrotyrosine and the sites for nitration were investigated by peptide mass mapping after in-gel digestion. Direct mass mapping by ESI revealed that two peptides were nitrated. Precursor ion scanning for the immonium ion for nitrotyrosine revealed two additional partially nitrated peptides. Based on the studies with the two model compounds, we suggest that the investigation of in vivo nitration of tyrosine and identification of nitrated peptides might be performed by precursor ion scanning for the specific immonium ion at m/z 181.06 combined with ESI-MS/MS for identification of the specific nitration sites.     

The influence of electrospray deposition in matrix-assisted laser desorption/ionization mass spectrometry sample preparation for synthetic polymers

Although electrospray sample deposition in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) sample preparation increases the repeatability of both the MALDI signal intensity and the measured molecular mass distribution (MMD), the electrospray sample deposition method may influence the apparent MMD of a synthetic polymer. The MMDs of three polymers of differing thermal stability, polystyrene (PS), poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG), were studied by MALDI time-of-flight (TOF) MS as the electrospray deposition voltage was varied. The MMDs obtained using the electrospray deposition method were compared with those obtained for hand-spotted samples. No change was observed in the measured polymer MMD when the electrospray deposition voltage was varied in the analysis of PS, but those of PEG and PPG changed at higher electrospray voltages due to increased ion fragmentation. It was also shown that the fragmentation in the hand-spotted samples is dependent on the matrix used in sample preparation.     

Analysis of the accuracy of determining average molecular weights of narrow polydispersity polymers by matrix-assisted laser desorption ionization time-of-flight mass spectrometry

Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOFMS) can be used to determine number- and weight-average molecular weights of narrow polydispersity polymers. In this work, several possible sources of error in determining molecular weights of polymers with narrow polydispersity by MALDI-TOFMS are rigorously examined. These include the change in polymer distribution function, broadening or narrowing of the overall distribution, and the truncation of selected oligomer peaks within a distribution (i.e., the oligomer peaks at the high-and low-mass tails expected to be observed are not detected). These variations could be brought about by a limited detection sensitivity, background interference, and/or mass discrimination of oligomer analysis in MALDI-TOFMS. For narrow polydispersity polystyrenes, it is shown that by using an appropriate MALDI matrix and sample preparation protocol and a sensitive ion detection instrument, no systematic errors from these possible variations were detected within the experimental precision (0.5% relative standard deviation) of the MALDI method. It is concluded that MALDI mass spectrometry can provide accurate molecular weight and molecular weight distribution information for narrow polydispersity polymers, at least for polystyrenes examined in this work. The implications of this finding for polymer analysis are discussed.     

Fingerprinting proteins coupled with polymers by mass spectrometry: Investigation of polyethylene glycol-conjugated superoxide dismutase

Matrix-assisted laser desorption-ionization (MALDI) mass spectrometry was investigated as a method for the rapid determination of the extent of polymer coupling in polyethylene glycol- (PEG) conjugated superoxide dismutase (SOD). PEG-conjugated SOD, an antioxidant with an extended in vivo circulation lifetime compared to that of superoxide dismutase, is being evaluated as an effective therapeutic agent for the treatment of injuries and arthritis. The mass spectra of a standard batch of PEG-conjugated bovine SOD showed the presence of identifiable and well resolved peaks that correspond to 0–7 PEG molecules attached to bovine SOD. The area of each of the peaks provides a determination of the amount of PEG-conjugated SOD with a given number of bound PEG groups. SOD is a noncovalent dimer of two identical subunits that dissociates in MALDI. The information obtained in the mass spectra thus corresponds to a monomer of SOD. Each SOD monomer contains 10 lysines, which are the sites of PEG-conjugation. Multiple MALDI determinations of two batches of samples indicated good reproducibility for routine determination of the extent of polymer content. The amount of PEG-conjugated SOD that contained a given number of PEG molecules, determined by MALDI, was compared with the value deduced from the amount of PEG-conjugation at each attachment site measured by a peptide mapping method. Agreement between the data obtained in the two techniques (MALDI and peptide mapping) indicates that MALDI may be used to obtain quantitative information on PEG-conjugated SOD to determine the amounts of PEG-conjugated protein each with a different number of PEG groups attached. Measurement of several batches of samples stored at a higher temperature showed a lower extent of PEG-conjugation in PEG-conjugated SOD. This reduction in the PEG content resulted from the PEG-deconjugation of PEG-conjugated SOD at a higher temperature. Thus, MALDI can be used to examine the stability of PEG-conjugated SOD. The high sensitivity, relatively straightforward data interpretation, speed of analyses, and good reproducibility in measurements make this technique a useful analytical tool for fingerprinting PEG-conjugated SOD as well as potentially other polymer-conjugated proteins.     

Relative quantification of tau-related peptides using guanidino-labeling derivatization (GLaD) with online-LC on a hybrid ion trap (IT) time-of-flight (ToF) mass spectrometer

Development of a quantification method based on isotopic variants of O-methyl isourea (OMIU) in conjunction with reversed-phase (RP) liquid chromatography (LC) electrospray mass spectrometry is described for determining the relative quantification of tau-related peptides Ac-VQIVXK-NH2. Extracted ion chromatograms of the mass spectrometric data derived from online microcapillary LC separation identifies the retention times of the isotopically derivatized peptides together with their ion abundances. Data-dependent MSMS analysis of both derivatized variants of the same peptide provides a complementary method for identification and resolution between isobaric species. In addition, with respect to offline LC MALDI a larger number of analogues are detected and formation of amyloid is also observed for the aspartic acid and histidine-containing peptides.     

Analysis of hydrocarbon polymers by matrix-assisted laser desorption / ionization-fourier transform mass spectrometry

A quick and effective sample preparation is demonstrated for matrix-assisted laser desorption/ionization (MALDI) analysis of nonpolar polymers. Polyisoprene, polystyrene, and polybutadiene polymers were investigated by using as matrix a 2,5-dihydroxybenzoic acid and silver nitrate combination. Silver cationized oligomers produce useful spectra that can be signal averaged to characterize polymer distributions extending up to 6000 u by using a 3-T Fourier transform mass spectrometer. Because an electrostatic ion deceleration protocol was used to extend the mass range, trapping discrimination is shown to exist for molecular weight distributions broader than about 2500 u. However, an integral procedure can be used to reconstruct the true polymer profiles through co-addition of signal transients obtained by using various gated deceleration times. For polymers with narrower mass distributions, silver cationization along with signal averaging provides rapid and accurate polymer characterization for nonpolar polymer systems by using standard MALDI Fourier transform mass spectrometry instrumentation.     

Parameters contributing to efficient ion generation in aerosol MALDI mass spectrometry

The Bioaerosol Mass Spectrometry (BAMS) system was developed for the real-time detection and identification of biological aerosols using laser desorption ionization. Greater differentiation of particle types is desired; consequently MALDI techniques are being investigated. The small sample size ( approximately 1 microm3), lack of substrate, and ability to simultaneously monitor both positive and negative ions provide a unique opportunity to gain new insight into the MALDI process. Several parameters known to influence MALDI molecular ion yield and formation are investigated here in the single particle phase. A comparative study of five matrices (2,6-dihydroxyacetophenone, 2,5-dihydroxybenzoic acid, alpha-cyano-4-hydroxycinnamic acid, ferulic acid, and sinapinic acid) with a single analyte (angiotensin I) is presented and reveals effects of matrix selection, matrix-to-analyte molar ratio, and aerosol particle diameter. The strongest analyte ion signal is found at a matrix-to-analyte molar ratio of 100:1. At this ratio, the matrices yielding the least and greatest analyte molecular ion formation are ferulic acid and alpha-cyano-4-hydroxycinnamic acid, respectively. Additionally, a significant positive correlation is found between aerodynamic particle diameter and analyte molecular ion yield for all matrices. SEM imaging of select aerosol particle types reveals interesting surface morphology and structure.     

Electrospray interfacing of polymer microfluidics to MALDI-MS

The off-line coupling of polymer microfluidics to MALDI-MS is presented using electrospray deposition. Using polycarbonate microfluidic chips with integrated hydrophobic membrane electrospray tips, peptides and proteins are deposited onto a stainless steel target followed by MALDI-MS analysis. Microchip electrospray deposition is found to yield excellent spatial control and homogeneity of deposited peptide spots, and significantly improved MALDI-MS spectral reproducibility compared to traditional target preparation methods. A detection limit of 3.5 fmol is demonstrated for angiotensin. Furthermore, multiple electrospray tips on a single chip provide the ability to simultaneously elute parallel sample streams onto a MALDI target for high-throughput multiplexed analysis. Using a three-element electrospray tip array with 150 microm spacing, the simultaneous deposition of bradykinin, fibrinopeptide, and angiotensin is achieved with no cross talk between deposited samples. In addition, in-line proteolytic digestion of intact proteins is successfully achieved during the electrospray process by binding trypsin within the electrospray membrane, eliminating the need for on-probe digestion prior to MALDI-MS. The technology offers promise for a range of microfluidic platforms designed for high-throughput multiplexed proteomic analyses in which simultaneous on-chip separations require an effective interface to MS.     

Continuous sample deposition from reversed-phase liquid chromatography to tracks on a matrix-assisted laser desorption/ionization precoated target for the analysis of protein digests

Peptide mass fingerprinting by matrix-assisted laser desorption/ionization (MALDI)-mass spectrometry (MS) is one of the standard high-throughput methods for protein identification today. Traditionally this method has been based on spotting peptide mixtures onto MALDI targets. While this method works well for more abundant proteins, low-abundance proteins mixed with high-abundance proteins tend to go undetected due to ion suppression effects, instrumental dynamic range limitations and chemical noise interference. We present an alternative approach where liquid chromatography (LC) effluent is continuously collected as linear tracks on a MALDI target. In this manner the chromatographic separation is spatially preserved on the target, which enables generation of off-line LC-MS and LC-MS/MS data by MALDI. LC-MALDI sample collection provides improved sensitivity and dynamic range, spatial resolution of peptides along the sample track, and permits peptide mass mapping of low-abundance proteins in mixtures containing high-abundance proteins. In this work, standard and ribosomal protein digests are resolved and captured using LC-MALDI sample collection and analyzed by MALDI-TOF-MS.     

Glycoalkaloid concentration in Alberta potatoes determined by matrix-assisted laser desorption/ionization mass spectrometry.

Matrix-assisted laser desorption and ionization (MALDI) mass spectrometry was used to determine concentrations of individual potato glycoalkaloids in tubers. Samples were extracted with methanol-water and deposited on 2,4,6-trihydroxyacetophenone crystals. Positive ions were analyzed with a MALDI time-of-flight mass spectrometer equipped with a 337 nm laser. Analyte ion intensities relative to an internal standard were used to determine chaconine and solanine concentrations. Calibration curves were prepared by standard additions to potato tuber material. The relative standard deviations (RSDs) of triplicate measurements ranged from 1 to 16%, with an average of 9%. The day-to-day RSD for replicate determinations was 11%. Recoveries of analyst-prepared spikes (50 micrograms/g) averaged 104% for chaconine (RSD, 8%) and 98% for solanine (RSD, 4%). The method limit of detection was estimated to be 2 micrograms/g.     

离子交换色谱中混合保留机理的研究

鉴于离子交换色谱中被测离子和有机聚合物树脂之间存在的吸附作用, 选择阴离子交换色谱柱IonPacAS9-HC为研究对象, 针对离子交换色谱中的吸附保留行为, 从色谱混合保留机理的角度出发, 考虑各色谱柱固定相含量和界面吸附面积的不同, 建立柱间保留的相互关系方程. 在五根不同批号IonPacAS9-HC (250 mm×2 mm I.D.)柱上, 以含50%乙腈(V/V)的9 mmol/L Na₂CO₃为流动相, 0.25 mL/min流速, 对12个不同结构类型的无机和有机阴离子(氟离子、氯离子、硫酸根、磷酸根、二羟基丁酸、丙酮酸、乙酸、丙烯酸、苯甲酸、丙二酸、酒石酸和邻苯二甲酸)的保留行为进行研究, 并采用推导所得的混合保留机理模型对溶质这一保留特征进行表征, 结果较为理想, 其中一价离子的相关系数为0.9～0.999, 二价离子的相关系数为0.999～1, 为离子交换色谱中吸附保留行为的研究提供了新方法.     

Negative ion production from peptides and proteins by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Negative ion production from peptides and proteins was investigated by matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry. Although most research on peptide and protein identification with ionization by MALDI has involved the detection of positive ions, for some acidic peptides protonated molecules are not easily formed because the side chains of acidic residues are more likely to lose a proton and form a deprotonated species. After investigating more than 30 peptides and proteins in both positive and negative ion modes, [M–H]⁻ ions were detected in the negative ion mode for all peptides and proteins although the matrix used was 2,5‐dihydroxybenzoic acid (DHB), which is a good proton donor and favors the positive ion mode production of [M+H]⁺ ions. Even for highly basic peptides without an acidic site, such as myosin kinase inhibiting peptide and substance P, good negative ion signals were observed. Conversely, gastrin I (1‐14), a peptide without a highly basic site, will form positive ions. In addition, spectra obtained in the negative ion mode are usually cleaner due to absence of alkali metal adducts. This can be useful during precursor ion isolation for MS/MS studies. Copyright © 2008 John Wiley & Sons, Ltd.     

Intensity dependence of cation kinetic energies from 2,5-dihydroxybenzoic acid near the infrared matrix-assisted laser desorption/ionization threshold

The mechanisms responsible for matrix-assisted laser desorption/ionization (MALDI) are far from being well understood, particularly where infrared laser irradiation is used to initiate the process. We measured the emission yields and kinetic energy distributions of positive ions emitted from 2,5-dihydroxybenzoic acid loaded with angiotensin II in a standard MALDI preparation during irradiation with an infrared free-electron laser tuned to 2.94 microm. As the laser intensity is scanned through the MALDI threshold, we see a marked change in the energy distributions of the matrix ion. Above threshold, the energy distributions of both analyte and matrix cations are constant over a broad range of laser intensities. This behavior does not appear to be consistent with any extant model of the MALDI mechanism.     

Preparation and characterization of ceria‐zirconia composite for enrichment and identification of phosphopeptides

Ceria‐zirconia composites at different molar ratios were synthesized. Several methods were used to characterize these composites, including X‐ray photoelectron spectroscopy, surface area and surface acid‐base property detection. A one‐step method for isolation and identification of phosphopeptides from peptide mixture was created using these ceria‐zirconia composites. Using tryptic digest of standard phosphorylated protein, we have shown that these enrichment and dephosphorylation activities are effective. The adsorption capacity and catalytic property of ceria‐zirconia composites at different molar ratios and calcinated temperatures were studied. In combination with MALDI‐TOF‐based peptide mass finger printing technique, we have established a method to utilize the enrichment/dephosphorylation dual properties of these ceria‐zirconia composites for the analysis of phosphoprotein in nonfat milk successfully.     

A novel,simple and sensitive ligand affinity capture method for detecting molecular interactions by MALDI mass spectrometry

A simple and sensitive ligand affinity capture method (LAC) was developed to detect biotinylated biomolecules bound to a biotin–avidin base by matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry (MALDI ToF MS). Glass slides covered with a metal film for MALDI MS applications were treated with amino‐silane and derivatized with biotin followed by binding of avidin. Washing buffers with high ionic strength increased the specificity of the subsequent binding of biotinylated biomolecules to the avidin layer. A combined thin layer‐dried droplet method using α‐cyano‐4‐hydroxycinnamic acid (CHCA) in acetone or ethyl acetate resulted in the most intense ions of biotinylated polymyxin B, whereas the matrix conditions did not influence the detection of angiotensin II. Addition of biotinylated biomolecules in the low femtomole to low picomole range resulted in sufficient ion intensity for detection by the LAC method. The LAC concept was extended by binding of biotinylated lipopolysaccharide to the biotin–avidin base followed by preferential capture and specific detection of the binding antagonist polymyxin B. Copyright © 2008 John Wiley & Sons, Ltd.     

Disposable polymeric high-density nanovial arrays for matrix assisted laser desorption/ionization-time of flight-mass spectrometry: II. Biological applications.

A novel disposable high-density matrix assisted laser desorption/ionization (MALDI) target plate made either from polymethylmethacrylate (PMMA) or polycarbonate (PC) is presented where thousands (1,200-1,600) of samples can be deposited and subsequently analyzed by MALDI-time of flight (TOF) mass spectrometry. Good reproducibility was obtained across the plate regardless of position on the target plate with a relative standard deviation (RSD) on the peak intensity of typically 30% calculated from data generated by analysis of a 10 nm peptide mixture of angiotensin I, II, III and bradykinin. The nanovial array format combined with microdispensing technology makes it possible to carry out in-vial chemistry on deposited samples. This is demonstrated by the analysis of peptides from beta-casein and subsequent in-vial dephosphorylation of its phosphopeptides at 10 fmol levels by microdispensing of alkaline phosphatase, into the nanovial. The mass spectra obtained from these polymeric targets provides can also be used in high sensitivity applications as shown by peptide mass fingerprinting of human fibroblast proteins separated by two-dimensional gel electrophoresis.