有限温度下三分裂的三种模式比较

用一个球到多个球重叠到分离的几何形状来描述裂片相互以120°方向形变(品字型),相互沿一条直线的拉长三体形变,以及先非对称后对称的级联三分裂的形变过程。方便比较只用了一个形变参数。基于液滴模型计算了表面能和库仑能,加入了新生碎片之间的核势,局域壳效应的壳能,给出三种三分裂模式的形变势能比较。考虑热核的各种温度效应,计算了在有限温度下这三种模式的位垒穿透概率,给出高温核位垒高度下降甚至位垒消失,定性给出三分裂的最可能的裂变方式。 关键词：     

重离子碰撞中熔合位垒的研究

熔合位垒的研究对熔合反应以及超重核合成有重要的意义。在改进的同位旋相关的量子分子动力学(ImIQMD)模型框架下,提取了熔合反应体系40Ca+40Ca,48Ca+208Pb,48Ca+204Pb和16O+154Sm的熔合位垒。研究了壳修正能对熔合位垒的影响、动力学位垒的能量依赖性、同位旋效应以及形变核的方向效应。计算发现壳修正能降低了熔合反应的位垒。在研究动力学位垒的能量依赖性时,发现位垒高度和位垒半径表现出相反的能量依赖行为。在动力学反应中,当两个核距离接近时,缺中子体系的库仑势同样表现出一定的能量依赖性。对于丰中子体系,由于中子屏蔽作用,库仑势基本没有能量依赖性。     

库仑位垒附近熔合反应的研究

利用改进的量子分子动力学研究了16?O?+?16?O库仑位垒附近的熔合反应,用连接函数的方法对体系的表面能做了改进.利用这种方法避免了非物理的核子发射,熔合截面有了明显的增加,这是因为体系的表面形变效应可以通过连接函数来体现,从而抑制了弹靶在熔合过程中非物理的核子发射.     

热核对称三分裂形状与位势

本文提出用球余加类三叶线回转体的几何形状来描述热核从球到对称三分裂断点的形变过程,其中仅用了一个形变参数.基于液滴模型,计算该形状锐边下的相对库仑势和表面势,从而给出三分裂核裂变集体势,鞍点形状与位垒高度,断点的裂片总动能等.同时还计算出在形变过程中每一裂片质心的变化和新生裂片的形变能.并考虑到表面能系数对温度的依赖性,将会降低热核三裂位垒高度,增加过垒几率.最后将本计算结果与以往类似计算进行了比较.     

基于相对论平均场理论对超重核冷熔合反应截面的研究

在形变约束的相对论平均场理论框架下计算了合成Z=102—118元素的(可能)冷熔合反应中复合核及蒸发一或两个中子剩余核的位能曲面,得到了复合核和剩余核平衡点和鞍点的性质、静态裂变垒高度和冷熔合反应的最佳入射能;利用壳修正和对修正方法计算了平衡点和鞍点的壳修正能、对修正能和微观能.利用由此得到的壳结构信息,用简单的熔合蒸发唯象模型计算了相应反应的冷熔合截面.结果发现,TM1参数提供的结构性质给出了与实验接近的反应截面.     

超重核熔合中的靶核形变效应

利用额外推力模型研究了⁴⁸Ca+²³⁸U俘获和熔合过程中的靶核形变效应.计算表明,在近垒和垒下能区,靶核形变使俘获截面和熔合截面增强,形成的复合核自旋分布展宽.     

重离子位垒下熔合——多维位垒透射及动力学过程的研究

前言入射能量接近和低于库仑位垒能区的重离子熔合反应是当前重离子反应研究中一个十分活跃的前沿领域。实验和理论的探索已经证实并描述了高于位垒的低能区重离子(轻核到中重核)反应主要经历的全熔合反应机制。两个硬球在一维(径向距离)库仑+核势相互作用下碰撞、并越过熔合位垒熔合的图像给出了对于垒上低能区全熔合截面的相当好的拟合。然而,相当简化的一维位垒模型的成功是由于垒上低能区全熔合截面一般说来并不灵敏于其它自由度。     

原子核裂变的宏观模型计算

用密度可变的连续介质模型计算了A≥100区域β稳定核宏观位能曲面,得到了合理的裂变位垒高度,预言了鞍点态裂变核电荷的双重心分布.     

垒下熔合裂变中观察到的异常

测量了¹⁶O+²³²Th、²³⁸U和¹⁹F+²³²Th近垒和垒下熔合裂变截面以及碎片角分布.包含靶核静态形变的耦合道理论解释了垒下熔合截面增强,预言了复合核系统自旋分布展宽.而实验上观察到的碎片角分布各向异性明显与裂变统计理论的预言不一致.     

张量力在~(16)O+~(16)O熔合动力学中的效应

利用时间相关Hartree-Fock理论和完整Skyrme有效相互作用研究了~(16)O+~(16)O碰撞在库仑位垒附近的熔合动力学。数值计算是在没有任何对称性约束的三维笛卡尔基下完成。将时间相关Hartree-Fock理论和冻结密度近似下的能量密度泛函方法给出的库仑位垒与实验结果进行了比较,发现同位旋标量的张量项能降低自旋饱和体系~(16)O+~(16)O的库仑位垒,而库仑位垒高度随着同位旋矢量的张量项的耦合常数减小而降低。并计算了包含和不包含张量力的~(16)O+~(16)O熔合截面,发现张量力对~(16)O+~(16)O碰撞在库仑位垒附近的熔合动力学影响较小。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.