Bifurcation and chaos of Tessiet type food chain chemostat with periodically varying substrate

In this paper, we introduce and study a model of Tessiet type food chain chemostat with periodically varying substrate. We investigate the subsystem with substrate and prey and study the stability of the periodic solutions, which are the boundary periodic solutions of the system. The stability analysis of the boundary periodic solution yields an invasion threshold. By use of standard techniques of bifurcation theory, we prove that above this threshold there are periodic oscillations in substrate, prey and predator. Furthermore, we numerically simulate a model with sinusoidal dilution rate, by comparing bifurcation diagrams with different bifurcation parameters, we can see that the periodic system shows two kinds of bifurcations, whose are period-doubling and period-halving.     

Enthalpy of dilution of aqueous systems containing S-trioxane and some amides. Analysis of the interaction of saccharides with amides in aqueous media

Enthalpies of dilution of aqueous systems of trioxane+formamide and trioxane+dimethylformamide have been determined at 25°C. The data have been treated in terms of the Savage-Wood additivity principle, and a first estimate of the pairwise group interaction enthalpy for-O-/CONH is presented. Systems of saccharides and amides are not amenable to the Savage-Wood treatment used in recent works. However, when treated in conjunction with all available data to yield a different set of group interaction parameters, saccharides behave more predictably. Implications of this state of affairs are considered.     

Extension of the dynamic range of flame atomic absorption spectrometry using flow injection analysis with variable-volume dilution chambers

A simple and inexpensive procedure is proposed for the extension of the dynamic range of flame atomic absorption spectrometry measurements using on-line dilution. The proposed methodology is based on the use of a manifold with two coupled dilution chambers and a zone injection system. The samples are prediluted in a closed system which includes a variable-volume mixing chamber (10–120 ml) and two injection valves. The samples are injected through one of these valves, and the other is employed to take 100 μl of prediluted samples which are then passed through a new dilution chamber (volume 1–10 ml) and aspirated by the nebulizer of the instrument. A third injection valve mounted in the last part of the manifold is used for the direct injection of diluted standard solutions. Various dilution factors are obtained, ranging from 2 to 130 000 times, thus extending the analytical range of copper determination to more than 100 000 mg l⁻¹.     

Interactions of ether groups with saccharides. Enthalpy of dilution of aqueous systems containing S-trioxane and inositol,mannitol, or cyclohexanol

Enthalpies of dilution of aqueous systems containing trioxane, and trioxane with each of mannitol, inositol and cyclohexanol have been determined at 25°C. The data have been treated in terms of the Savage-Wood additivity principle and, in conjunction with literature data on ether compounds a revised estimate of the pairwise group-interaction enthalpy for CH₂/–O– and a first estimate for CHOH/–O– are presented. Systems of saccharides and saccharides with alcohols do not conform to the Savage-Wood principle and an explanation in terms of the specific hydration properties of saccharides is offered.     

Simultaneous determination of clenbuterol, salbutamol and ractopamine in milk by reversed-phase liquid chromatography tandem mass spectrometry with isotope dilution

A simple, sensitive and reliable analytical method was developed for the simultaneous determination of clenbuterol (CLB), salbutamol (SAL) and ractopamine (RAC) in milk by ultra high performance liquid chromatography–positive electrospray ionization tandem mass spectrometry (UHPLC–ESI-MS/MS) with isotope dilution. Samples were directly purified through HLB cartridge. Then the eluate was dried under nitrogen and residues were redissolved in mobile phase. Samples were analyzed by LC–MS/MS on an Acquity UPLC^® BEH C₁₈ column with gradient elution. The samples were quantified using clenbuterol-D₉, salbutamol-D₃ and ractopamine-D₆ as internal standards. The proposed method was validated according to the European Commission Decision 2002/657/EC determining specificity, decision limit (CCα), detection capability (CCβ), recovery, precision, linearity, robustness and stability. CCα values were 0.054, 0.006 and 0.008 μg/kg for CLB, SAL and RAC, respectively. CCβ values were 0.058, 0.007 and 0.009 μg/kg for CLB, SAL and RAC, respectively. The mean recoveries, repeatability (expressed as coefficient of variation, CV_r), and reproducibility (CV_R) varied from 95.8 to 106.2%, from 3.60 to 6.44% (CVr), and from 4.77 to 7.53% (CV_R), respectively. The method is demonstrated to be suitable for the determination of clenbuterol, salbutamol and ractopamine in milk. The total time required for the analysis of one sample, including sample preparation, was about 45 min.     

Improving headspace-solid-phase microextraction of 3-isobutyl-2-methoxypyrazine by experimental design with regard to stable isotope dilution gas chromatography-mass spectrometric analysis of wine

To solve problems of sensitivity, repeatability and multi-step extraction related to 3-isobutyl-2-methoxypyrazine (IBMP) determination in wines, a simple method based on the novel combination of solid-phase microextraction and stable isotope dilution assay is presented. Among the parameters that affect this type of extraction, five of them have been optimised since the other parameters have common values or do not require optimisation (e.g. addition of sodium chloride at saturated concentration) and so were fixed. Vial volume, sample volume/vial volume ratio, pH, adsorption time and temperature have been optimised by means of two experimental designs. After extraction, quantification was performed by stable isotope dilution with gas chromatography-tandem mass spectrometry ([]-IBMP as internal standard). The final procedure allowed quantification far below IBMP’s sensory threshold (1 ng l⁻¹ versus 15 ng l⁻¹) with a 4% standard deviation. This method has been applied to experimental Fer servadou wines. Comparison of IBMP contents confirmed the efficiency of some viticultural and enological techniques on the herbaceous flavour decrease, such as prior fermentation maceration at high temperature (70 °C) and the use of a reflective carpet on viticultural soil.     

Determination of arginine and asymmetric dimethylarginine (ADMA) in human plasma by liquid chromatography/mass spectrometry with the isotope dilution technique

Arginine (ARG) is a substrate for endogenous nitric oxide (NO) production whereas its metabolite, asymmetric dimethylarginine (ADMA), acts as an inhibitor. Sufficient NO production is essential for cardiovascular key functions, thus elevated concentration levels of ADMA are related to a range of cardiovascular diseases. Owing to the lack of reliable methods for the measurement of ARG and ADMA in human plasma, concentration values determined with these methods can differ considerably. We present here a simple and very robust liquid chromatographic/mass spectrometric method for the determination of ARG and ADMA utilizing isotope-labeled internal standards. Sample preparation requires only protein precipitation; the analytes were derivatized with o-phthalaldehyde-mercaptoethanol and separated on a reversed-phase C(18) column with gradient elution. The analytes were detected with an electrospray ionization ion trap instrument working in the full-scan single mass spectrometry mode. Concentration values obtained with this method for healthy controls were ARG = 63.9 +/- 23.9 microM and ADMA = 0.355 +/- 0.066 microM, with a normal range for ADMA from 0.225 to 0.485 microM. The corresponding values for end-stage chronic renal failure patients are ARG = 48.1 +/- 18.5 microM, p < 0.01 and ADMA = 0.673 +/- 0.134 M, p < 0.001.     

Determination of ultra-trace amounts of Fe in AgNO<Subscript>3</Subscript> solutions by means of isotope dilution analysis applying an inductively coupled plasma mass spectrometer equipped with a dynamic reaction cell

The development of an ICP-MS method for the determination of ultra-trace amounts of Fe in AgNO₃ solutions using isotope dilution for calibration is described. AgNO₃ solutions are used as raw materials in the production of traditional photographic materials, and it is known that contamination with metal traces can influence the quality of the films thus produced. After adding an appropriate amount of an ⁵⁴Fe-enriched spike and permitting isotopic equilibration to take place, Ag was selectively removed from the solutions by precipitation as AgBr. Although to some extent, co-precipitation of Fe is possible under the given circumstances, an incomplete recovery of the analyte element did not affect the accuracy of the results, owing to the use of isotope dilution for calibration. NH₃ was used as a reaction gas in a quadrupole-based ICP-MS instrument, equipped with a dynamic reaction cell (DRC), providing interference-free measurement of the ⁵⁴Fe/⁵⁶Fe ratio. The limit of detection (LOD) obtained using this procedure was approximately 0.01 µg g^-1. This is an excellent value in comparison with the detection limit obtained with the more traditional approach: sample dilution and external calibration with a Fe standard solution (LOD ~1 µg g^-1). To validate the method, recovery experiments were carried out. In all instances, a quantitative recovery was established. Finally, the method was applied to the analysis of AgNO₃ solutions. A large variation in Fe concentration was observed. Depending on the Fe content in the samples, relative standard deviations typically ranged between 1 and 14%.     

Study of hopping transport in long oligothiophenes and oligoselenophenes: dependence of reorganization energy on chain length

Internal reorganization energies for self-exchange hole-transfer process were calculated at the B3LYP/6-31G(d) level of theory for a series of oligothiophenes and oligoselenophenes up to the 50-mers. This is the first study of reorganization energy in very long pi-conjugated systems. We observed a linear correlation between reorganization energy and the reciprocal chain length for these long pi-conjugated heterocyclic oligomers, which can be explained by the changes in bond length that occur between the neutral and cation radical species and by the charge distribution in the cation radicals. In contrast to the saturation behavior observed for the HOMO-LUMO gaps of long pi-conjugated heterocyclic oligomers, the reorganization energy does not show saturation behavior for any length of the oligomers in this study, even up to the 50-mers. Interestingly, the reorganization energy approaches zero for infinite numbers of oligomer units (at the B3LYP/6-31G(d) level of theory), that is, for polythiophene and polyselenophene. The absolute values of the reorganization energies of oligoselenophenes, and the changes that occur in those energies with chain length, are similar to those found for oligothiophenes.     

Bias reduction in the quantitative analysis of a target analyte present in a limited quantity in human plasma using dual-mode heart-cutting two-dimensional liquid chromatography coupled with isotope dilution mass spectrometry

Dual-mode heart-cutting two-dimensional liquid chromatography (DMHC 2D-LC) was applied to isotope dilution mass spectrometry (IDMS) to reduce the bias in the quantitative analysis of a target analyte present in a limited quantity in human plasma. Based on a Waters I-Class LC system, the DMHC 2D-LC system was operated in one- and two-dimensional modes to facilitate the determination of heart-cutting time and the efficient trapping of the target LC eluate. Experiments to determine the feasibility of coupling with IDMS were performed with triple quadrupole mass spectrometry using folic acid standards and/or ¹³C₅-folic acid. To validate the performance of the DMHC 2D-LC/IDMS system on a complex sample, human plasma was analyzed for folic acid and the result was compared with that obtained using conventional single-column LC. The total run time of the DMHC 2D-LC system was 20 min, the same as that of the single-column LC system. The peak profile of the spiked ¹³C₅-folic acid obtained with single-column LC/MS was affected by matrix effects, but resolved with DMHC 2D-LC/MS, thus improving the accuracy of the analysis. The DMHC 2D-LC/IDMS system showed reliable performance in analyzing the target analyte in human plasma, eliminating matrix effects and saving analysis time.     

Activity coefficients of hydrocarbons at infinite dilution in di-n-octyltin dichloride. Comparison with results obtained in other alkyltin solvents

The gas chromatographic method was employed to measure the infinite dilution activity coefficients of twenty-eight hydrocarbons of different types in di-n-octyltin dichloride between 50 and 80°C, and of seven branched alkanes in tri-n-octyltin chloride between 40 and 60°C. A comparison is made between the results obtained for all the solutes in both solvents and in tetra-n-octyltin.     

Comparison of methods with respect to efficiencies, recoveries, and quantitation of mercury species interconversions in food demonstrated using tuna fish

Eight different analytical extraction procedures commonly used to extract mercury species from biological samples were evaluated by analyzing Tuna Fish Tissue Certified Reference Material (ERM-CE464) certified for the content of total mercury and methylmercury. Speciated isotope dilution mass spectrometry (SIDMS; US Environmental Protection Agency’s method 6800) was utilized to evaluate and effectively compensate for potential errors during measurement and accurately quantify mercury species using all the extraction methods. SIDMS was used to accurately evaluate species transformations during sample pretreatment, preparation and analysis protocols. The extraction methods tested in this paper were based on alkaline extraction with KOH or tetramethylammonium hydroxide; acid leaching with HCl, HNO₃ or CH₃COOH; extraction with l-cysteine hydrochloride; and enzymatic digestion with protease XIV. Detection of total mercury and mercury species from all extraction methods was carried out by inductively coupled plasma mass spectrometry (ICP-MS) and high-performance liquid chromatography–ICP-MS, respectively. Microwave-assisted extraction and ultrasound-assisted extraction were found to be the most efficient alkaline digestion protocols that caused the lowest levels of transformation of mercury species (6% or less). Extraction with 5 M HCl or enzymatic digestion with protease resulted in the second-highest extraction efficiency, with relatively lower transformation of methylmercury to inorganic mercury (3 and 1.4%, respectively). Despite frequent use of acid leaching for the extraction of mercury species from tuna fish samples, the lowest extraction efficiencies and the highest mercury species transformation were obtained when microwave-assisted extraction with 4 M HNO₃ or CH₃COOH was used. Transformations as high as 30% were found using some literature protocols; however, all the extractions tested produced accurate quantitation when corrected in accordance with the SIDMS method standardized in the US Environmental Protection Agency’s method 6800. Figure Determinative CRM Tuna Fish Tissue Methylmercury Calibration vs. Determinative Calculation.     

沸石桥羟基和硅羟基与噻吩相互作用的理论研究

采用密度泛函理论和模型簇法研究了噻吩和沸石分子筛桥羟基和硅羟基的相互作用.对噻吩吸附在硅羟基H3SiOH可能的两种配位方式及吸附在沸石模型簇H3Si(OH)Al(OH)2OSiH3桥羟基B酸上可能的两种配位方式进行了比较分析.所有模型簇采用B3LYP混合方法对氢原子在6-31G基组水平上,对硅原子、铝原子、氧原子、碳原子、硫原子在6-31 G(d)基组水平上进行了全优化和频率分析.着重考察了噻吩与硅羟基及分子筛桥羟基模型簇不同配位方式所形成的配合物的结构及能量变化.计算结果表明由于在形成沸石-噻吩和硅羟基-噻吩配合物的结构和性质变化不明显,所以它们之间的相互作用为范德华作用力.从噻吩在沸石分子筛的桥羟基和硅羟基与噻吩的相互作用的吸附热可以推断,噻吩优先吸附在桥羟基上,只有桥羟基吸附饱和后方吸附在硅羟基上.由频率分析结果和实验结果的一致性可以证明所推测吸附模型的正确性.     

高阶FMSA展开研究缔合流体界面张力

结合一阶平均球近似(First-order mean-spherical approximation, FMSA)与重整化群(Renormalization group, RG)变换计算了流体全局性相行为. 应用FMSA理论解析得到的径向分布函数(Radial distribution function, RDF)和直接相关函数(Direct correction function, DCF)建立密度泛函方法, 并在其展开项中考虑了高阶微扰项作用, 即考虑了主体流体密度不一致性, 避免原有方法在计算密度分布时存在难以收敛、误差大等问题. 将高阶展开扩展应用到缔合流体, 计算表明, 和分子模拟数据相比, 界面密度分布和界面张力较之原有的密度泛函方法均有了明显改善.     

First-Principles Study of Field Emission from Zigzag Graphene Nanoribbons Terminated with Ether Groups

Field emission properties of zigzag graphene nanoribbons terminated with C-O-C ether groups (including cyclic and alternative ether groups at edge, denoted as ZGNR-CE and ZGNR-AE) are studied by adopting a self-consistent method based on density functional theory calculation. The results show that the field emissions of these two nanoribbons are dominated by states around Brillouin zone center and close to Fermi level. Because of lower work function, the ZGNR-CE can produce much stronger emission current than recon-structed zigzag graphene nanoribbon. The ZGNR-AE has nearly completely spin-polarized emission current, although its emission current is not strong enough. It is also found that under the lower E-field, the uniaxial strain can effectively modulate their emission currents but the spin polarization of ZGNR-AE keeps unchanged with the varied strain. The under-lying mechanisms are revealed by combining the analyses of their work functions and bandstructures with edge dipole model.     

N-烷基吡啶阳离子及其与若干阴离子形成的离子对结构的理论研究

采用密度泛函理论方法, 在B3LYP/6-31＋G(d) 水平上研究了吡啶、N-烷基吡啶阳离子及其与若干阴离子(F^－, Cl^－, Br^－, , )形成的离子对的稳定构型. 计算结果表明: N-烷基吡啶阳离子的吡啶环与中性吡啶分子类似, 具有芳香性, 烷基对吡啶环结构影响不大; 离子对中阴离子易出现在吡啶环上方以及C(5)—H 或C(2)—H 和 N-甲基附近; 阴、阳离子之间通常存在多重氢键, 并且均有部分电荷转移; 离子对的相互作用能随着N-烷基的增长而减小.     

CuCl与SiO2-TiO2载体相互作用的密度泛函理论研究

以SiO2簇模型为基体,通过Ti原子取代建立Ti中心原子上连接0个或1个OH基团的典型SiO2-TiO2复合氧化物模型来模拟处于体相中和表面上的四配位Ti(IV)中心.采用广义梯度近似的密度泛函理论(DFT-GGA)研究了CuCl与SiO2-TiO2载体的相互作用.计算结果表明,在SiO2基体中嵌入Ti(IV)离子可以大大加强CuCl与氧化物载体之间的相互作用,使CuCl/SiO2-TiO2催化剂的结构更稳定.分子前线轨道表明Cu(I)作为催化剂的活性中心贡献了HOMO轨道,容易失去电子;Ti(IV)中心原子贡献LUMO轨道,容易得到电子,计算结果与实验事实相一致.     

Theoretical Study of the N-NO2 Bond Dissociation Energies for Energetic Materials with Density Functional Theory

The N-NO2 bond dissociation energies （BDEs） for 7 energetic materials were computed by means of accurate density functional theory （B3LYP, B3PW91 and B3P86） with 6-31G＊＊ and 6-311G＊＊ basis sets. By comparing the computed energies and experimental results, we find that the B3P86/6-311G＊＊ method can give good results of BDE, which has the mean absolute deviation of 1.30kcal/mol. In addition, substituent effects were also taken into account. It is noted that the Hammett constants of substituent groups are related to the BDEs of the N-NO2 bond and the bond dissociation energies of the energetic materials studied decrease when increasing the number of NO2 group.     

Theoretical Study on the Mechanism of CF2 Reaction with CH2O

The insertion reaction mechanism of CF2 with CH2O was investigated at the B3LYP/6-311G（d）//MP2/6-311G（d） level. The geometric conformations at each stationary point in reaction potential surface were fully optimized and the transition states were verified by intrinsic reaction coordinate （IRC） and frequency analysis. The energies of all reactants were calculated with CCSD（T）/6-311G（d）//G2MP2 methods. Results indicated that the P1 reaction route with difuoroaldehyde as product is the dominant reaction pathway, which exhibits nucleophilic character. According to NBO analysis, the starting point of insertion reaction is the interaction between carbene LP（C3） and formaldehyde π（Cl-O2）. Besides, the thermodynamic and dynamic properties of dominated reaction （1） at different temperature were studied with statistic thermodynamic method and Eyring transition state theory adjusted by Wigner means, from which the proper temperature （500- 1200 K） of reaction （1） could be estimated. Finally, the thermo- dynamic and dynamic properties of insertion reaction mechanisms （CF2, CX2 （X = Cl, Br） with CH2O） were compared and discussed.     

以混旋邻氯扁桃酸为模板的分子印迹聚合物的制备及拆分性能研究

以混旋邻氯扁桃酸为模板分子和合成的(S)-(1-萘乙基)-丙烯酰胺为手性功能 单体制备分子印迹聚合物作为色谱固定相，对混旋邻氯扁桃酸有较好的拆分能力， 分离因子α达到1.36。但对模板分子的类似物混旋扁桃酸和对氯扁桃酸没有拆分能 力。用Hyperchem软件模拟了(S)-邻氯扁桃酸与(S)-(1-萘乙基)-丙烯酰胺形成的复 合物的结构模型，其在聚合物母体中留下的具有立体构型和作用力双重识别的S-S 型空穴，对(S)-邻氯扁桃酸有较强的保留作用，从而达到对混旋物拆分的目的。