Structure,microstructure and magnetic properties of mixed rare earth oxide (Dy1‐xErx)2O3

The mixed rare earth oxide (Dy_1‐xEr_x)₂O₃ (0.0 ≤ x ≤ 1.0) were synthesized by a sol–gel process. X‐ray and neutron diffraction data were collected and crystal structure and microstructure analyses were performed using Rietveld refinement method. All samples were found to have the same crystal structure and formed solid solutions over the whole range of x. Preferential cationic distribution is found for all samples but with different extent with Dy³⁺ preferring the 8b among the two non‐equivalent sites 8b and 24d of the space group Ia3. The lattice parameter is found to vary linearly with the composition x and a systematic variation is found in the r.m.s microstrain . Magnetization measurements were done in the temperature range 5‐300 K and a behavior in accordance with Curie‐Weiss law was found. Anomalous concentration dependence is found in magnetic susceptibility which is ascribed to the concentration dependence of effective crystal field combined with the contribution of ⁴I_15/2 and ⁶H_15/2 manifold at elevated temperature. The effective magnetic moments μ_eff is found to decrease linearly with composition parameter x, except for sample x=0.5 where the magnetization is enhanced. The Curie‐Weiss paramagnetic temperatures indicated antiferromagnetic interaction. These magnetic results are discussed in view of the cationic distribution. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation and investigation of (CuInSe2)x(2ZnSe)1‐x and (CuInTe2)x(2ZnTe)1‐x solid solution crystals

The (CuInSe₂)_x(2ZnSe)_1‐x and (CuInTe₂)_x(2ZnTe)_1‐x solid solution crystals prepared by Bridgman method and chemical vapor transport have been studied. The nature of the crystalline phases, the local structure homogeneity and composition of these materials have been investigated by X‐ray diffraction (XRD) and Electron Probe Microanalysis (EPMA) methods. The analysis revealed the presence of chalcopyrite‐sphalerite phase transition between 0.6 ≤ X ≤ 0.7. Lattice constants, value of σ position parameter and bond length between atoms were also calculated. It was found that the lattice parameters exhibit a linear dependence versus composition. The transmission spectra of solid solution crystals in the region of the main absorption edge were studied. It was established that the optical band gap of these materials changes non‐linearly with the X composition. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

X‐ray diffraction analysis of powder and thin film of (Gd1‐x Yx)2O3 prepared by sol‐gel process

The mixed oxide (Gd_1‐xY_x)₂O₃ (0.0 ≤ x ≤ 1.0) were synthesized, as powder and thin film, by a sol‐gel process. X‐ray diffraction data were collected and crystal structure and microstructure analysis were performed using Rietveld refinement method. All samples were found to have the same crystal system and formed solid solutions over the whole range of x. The cationic distribution, Gd³⁺ and Y³⁺, over the two non‐equivalent sites 8b and 24d of the space group Ia3 is found to be random for all values of (x). The lattice parameter is found to vary linearly with the composition (x). Replacing Gd³⁺ and Y³⁺ by each other introduces a systemic decrease in the x‐coordinate of cation position (24d) and slight changes in the oxygen coordinates. Crystallite size and microstrain analysis is performed along different crystallographic directions and anisotropic changes are found with the composition parameter (x). The average crystallite size ranges from 75 to 149 nm and the r.m.s strain from 0.027 to 0.068 x10^‐2. Textured Gd_1.841Y_0.159O₃ (400) buffer layers, with a high degree of alignment in both out‐plane and in‐plan, are successfully grown on cube textured Ni (001) tape substrates by sol–gel dip coating process. The resulting buffer layers are crack‐free, pinhole‐free, dense and smooth. YbBa₂Cu₃O_7‐x (YbBCO) thin film could be (00l) epitaxially grown on the obtained buffer layer using sol–gel dipping technique. (© 2007 WILEY ‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Structural and Morphological Characterization of Pt/WO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>–ZrO<Subscript>2</Subscript> Catalysts

Abstract  Catalysts of Pt/WO _x –ZrO₂ type with 1 wt% of Pt and 10, 15 and 20 wt% of tungsten were synthesized and characterized. The structural and morphological features of these catalysts were studied. The samples were synthesized by impregnation method and calcined at 600 °C, 700 °C and 800 °C. The characterizations were carried out using different techniques: X-ray diffraction, Raman spectroscopy, scanning electronic microscopy, nitrogen adsorption measurement and refinement of their crystalline structures by Rietveld method. X-ray diffraction patterns revealed the formation ZrO₂ and WO₃ crystalline structures and its crystallite size were determined. The zirconium oxide crystallized into tetragonal and monoclinic phases and tungsten trioxide crystallized into monoclinic phase. Crystalline WO₃ and amorphous WO _x species were detected by Raman spectra. Index Abstract  Catalysts of Pt/WO _x –ZrO₂ type with 1 wt% of Pt and 10, 15 and 20 wt% of tungsten were synthesized and characterized. The structural and morphological features of these catalysts were studied. The samples were synthesized by impregnation method and calcined at 600 °C, 700 °C and 800 °C. The characterizations were carried out using different techniques: X-ray diffraction, Raman spectroscopy, scanning electronic microscopy, nitrogen adsorption measurement and refinement of their crystalline structures by Rietveld method. X-ray diffraction patterns revealed the formation ZrO₂ and WO₃ crystalline structures and its crystalline size were determined. The zirconium oxide crystallized into tetragonal and monoclinic phases and tungsten trioxide crystallized into monoclinic phase. Crystalline WO₃ and amorphous WO _x species were detected by Raman spectra.     

Crystal structure refinement of CuxAg1‐xInTe2 bulk material determined from X‐ray powder diffraction data using the Rietveld method

The influence of the Cu‐content in the quaternary compounds Cu_xAg_1‐xInTe₂ (0 ≤ x ≤1) on the structural properties of the bulk material was discussed. Bulk ingot materials of Cu_xAg_1‐xInTe₂ solid solutions (x = 0.0, 0.25, 0.50, 0.75 and 1.0) have been synthesized by fusion of the constituent elements in the stoichiometric ratios in vacuum‐sealed silica tubes. The materials compositions were confirmed by using energy dispersive analysis of X‐rays (EDAX). X‐ray powder diffraction measurements were performed for all the prepared samples at 300 K in step scanning mode. The analysis of X‐ray data has indicated that the crystal structure of the prepared materials with different compositions is single‐phase polycrystalline materials corresponding to the tetragonal chalcopyrite structure with space group I 2d. The crystal structural parameters were refined by Rietveld method using the Full Prof program. The refined lattice constants (a and c), anion positional parameter, u, and the determined bond distances and angles were found to vary with composition, x, attaining zero tetragonal distortion at x ≈ 0.75, which corresponds to an ideal tetragonal unit cell. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and characterization of hexagonal ferrites BaFe12‐2xZnxTixO19 (0 ≤ x ≤ 2) by thermal decomposition of freeze‐dried precursors

Substituted barium hexaferrites, BaFe_12‐2xZn_xTi_xO₁₉ (0 ≤ x ≤ 2), have been synthesized by thermal decomposition of freeze‐dried acetate precursors. Decomposition and phase formation were investigated by means of thermal analysis, XRD and IR spectroscopy. The initially amorphous decomposed precursor reacts to the substituted hexaferrite via a spinel‐like maghemite (γ‐Fe₂O₃) and Zn/Ti containing spinel ferrites. The synthesis method allows a decrease of the reaction temperature and time, necessary for producing a single phase hexaferrite. At relative low reaction temperatures, the substitution rate x shows remarkable differences at different iron sublattices. For x ≤ 0,8 this selective substitution results in an increase of magnetization as x grows. (© 2003 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Paramagnetic behavior of Zn1−xMnxO at room temperature

Mn‐doped ZnO were synthesized by solid state reaction and sol‐gel method respectively. It was found that samples synthesized by solid state reaction containing Mn₂O₃ and MnO₂ are a mixture of ferromagnetic and paramagnetic phases. Contrary, samples without second phases were found to be paramagnetic at room temperature. According to previous report, interface effects between Zn‐rich Mn₂O₃ and MnO₂ interfaces may be the origin of the ferromagnetic behavior observed in our samples prepared by solid reaction, so the alloy of Zn_1−xMn_xO may be paramagnetic at room temperature. Prepared by sol‐gel technique, the samples without second phases in the XRD patterns are also room‐temperature paramagnetic. Therefore we believe that the magnetism of Zn_1−xMn_xO is paramagnetic at room temperature. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Twin Structure of (La,Nd)GaO3 Solid Solutions

For La_1‐xNd_xGaO₃ crystals the La‐Nd substitution leads to decrease of spontaneous strains and for composition with x≈0.32 the six possible twin states of orthorhombic phase (m3mFmmm) may be degenerated in three twin states inhered in m3mF4/mmm species when a distorted perovskite pseudocell becomes tetragonal. The {110} and {112} reflection twins and axial twins with compositional planes close to (211) and (21‐1) (S‐walls) were identified in La_1‐xNd_xGaO₃ (x=0.07, 0.12, 0.20) solid solutions crystals. All observed twins are typical for crystals with GdFeO₃ type perovskite‐like structure. It has been shown that for x≤0.2 and x≥0.5 orientations of S‐walls weakly depend on La/Nd ratio, whereas in the range of 0.2<x<0.5 they depend strongly on the solid solution composition. The tilt angle between two twin states across twin boundary in La_1‐xNd_xGaO₃ (x<0.6) solid solutions is smaller than that between two twins in pure LaGaO₃ or NdGaO₃.     

Growth and thermal studies on pure ADP,KDP and mixed K1‐x(NH4)xH2PO4 crystals

The investigations on the formation of mixed crystals of ammonium dihydrogen orthophosphate (ADP) and potassium dihydrogen orthophosphate (KDP) i.e. potassium ammonium dihydrogen phosphate, K_1‐x(NH₄)_xH₂PO₄ have been presented in this paper. Pure and mixed crystals of ADP and KDP have been grown by slow evaporation technique from the supersaturated solution at an ambient temperature 26±1 °C for ammonium concentration x in the range 0.0 ≤ x ≤ 1.0 in the case of mixed crystals. Crystal compositions were determined by flame atomic absorption spectroscopy and chemical analysis. The results of the X‐ray analysis of the grown crystals are also reported. Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) were used to study the kinetic process of dehydration and the high temperature phase behaviour. DTA showed the distinct thermal events attributed to dehydration of ADP, KDP and K_1‐x(NH₄)_xH₂PO₄. The results of thermal analysis and chemical analysis are consistent with each other. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The Phase Diagram of the Pb–Mo–S System at 1250 K and Some Properties of the Superconducting PbMo6S8

Pb_xMo₆S_y arises as the sole ternary compound in the System Pb–Mo–S. At 1250 K it is surrounded by 4 phase regions with 3 solid phases. It has a homogeneity range of between 0.9 ≤ x < 1.1 and 7.6 ≤ y > ≤ 7.9. T_c changes within the homogeneity range. Chemical transport is possible within a limited section of the phase diagram in the presence of lead halides.     

Composition,morphology, and properties of sodium-bismuth tungstate crystals

A correlation has been revealed between the formation conditions, composition, morphology, and physicochemical properties of NaBi_{1 − x} (W_{1 + y} O₄)₂ crystals (0 ≤ x ≤ 0.16, 0 ≤ y ≤ 0.11). The effect of melt deviation from stoichiometry on the decomposition rate of grown crystals under electron beam irradiation is shown by transmission electron microscopy. A nonuniform dopant distribution over the crystal boule cross-section is found by microprobe analysis. The Raman spectra of the samples depend on their crystallographic orientation.

     

Distribution of aluminum and indium impurities in crystals of Ge-Si solid solutions grown from the melt

The problem regarding the distribution of aluminum and indium impurities in bulk crystals of solid solutions with a variable composition Ge_1−x Si _x (0 ≤ x ≤ 0.3) is solved in order to establish regularities of the changes in the segregation coefficients of impurities with variations in the composition of the host lattice in the germanium-silicon system. Aluminum-and indium-doped crystals of Ge_1−x Si _x (0 ≤ x ≤ 0.3) solid solutions with a silicon content decreasing along the crystallization axis are grown by a modified Bridgman method with the use of a silicon seed. The concentration distribution of impurities over the length of the crystals is determined from Hall measurements. It is demonstrated that the experimental data on the concentration distribution of impurities in the crystals are in good agreement with the results obtained from the theory according to which the equilibrium segregation coefficients of impurities vary linearly with a change in the composition of Ge-Si solid solution crystals.

     

Effect of rapid thermal annealing on Zn1‐xCdxO layers grown by radio‐frequency magnetron co‐sputtering

Zn_1‐xCd_xO layers were deposited on the sapphire substrate using the radio‐frequency magnetron co‐sputtering system. The grown Zn_1‐xCd_xO layers were carried out in the post‐annealing treatment for 1 min at the 800 °C oxygen‐ambient by the rapid thermal annealing (RTA) method. X‐ray diffraction (XRD) experiment shows that the Zn_1‐xCd_xO layers are changed from the single phase of the hexagonal structure at 0≤x ≤0.08 to the double phase of hexagonal‐and‐cubic structure at x =0.13. Thus, the maximum Cd‐composition ratio with the hexagonal structure was found out to be x =0.08. Also, the crystallinity of Zn_1‐xCd_xO layers at x =0.13 was remarkably improved by the RTA annealing treatment. This crystal quality improvement was thought to be associated with the relaxation of the compressive strain remaining in the Zn_1‐xCd_xO layers. Therefore, the results of XRD and transmittance lead that the crystal quality of the Zn_1‐xCd_xO layers forming the hexagonal ZnO phase is better than that forming the cubic CdO phase. Consequently, the reliable formation and the crystallinity of the Zn_1‐xCd_xO layers were achieved by using the RTA method of short‐time thermal‐annealing at the high temperature. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal structure and thermal behaviour of (Rb,Cs)BSi2O6 solid solutions

The crystal chemistry of Rb‐Cs boroleucites has been studied by means of X‐ray powder diffraction at room and elevated temperatures. The cubic I‐43d → cubic Ia3d phase transition was investigated using a series of samples prepared by solid‐state reaction along the pseudobinary system RbBSi₂O₆ ‐ CsBSi₂O₆. The Rietveld refinement of the structures of Rb_1‐xCs_xBSi₂O₆ solid solutions (x = 0.2, 0.4, 0.6, 0.8) demonstrates that the solutions with a high Rb content crystallise in the cubic I‐43d space group, and the boroleucites with a considerable Cs content have Ia3d symmetry. Rb can substitute Cs in a wide range of compositions. Within a narrow range of x = 0.5 ‐ 0.6 immiscibility was revealed. Under Rb‐Cs substitution the cubic lattice parameter, the (Rb,Cs)‐O distances, and the angles between tetrahedra of the I‐43d phase change clearly, while those of the Ia3d phase change slightly. The HTXRD data shows that the I‐43d phase transforms into a Ia3d phase on heating analogously to a change of the composition. As the Cs content increases the transition temperature decreases. The low temperature I‐43d phase shows a higher thermal expansion than the high temperature Ia3d phase. © 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim     

Optical and magnetic properties of Nd‐doped ZnO nanoparticles

Nd‐doped ZnO nanoparticles with different concentration were synthesized by sol‐gel method. The structures, magnetic and optical properties of as‐synthesized nanorods were investigated. X‐ray diffraction (XRD) and x‐ray photoelectron spectroscopy (XPS) results demonstrated that Nd ions were incorporated into ZnO lattice; but Zn_1‐xNd_xO nanoparticles with Nd concentration of x = 0.05 showed Nd₂O₃ phase, so the saturation concentration of Nd in Zn_1‐xNd_xO is less than 5 at%. Vibrating sample magnetometer (VSM) measurements indicated that Nd doped ZnO possessed dilute ferromagnetis behaviour at room temperature. Photoluminescence spectroscopy (PL) showed that Nd ions doping induced a red slight shift and decrease in UV emission with increase of Nd concentration.     

Magnetic properties and X‐ray photoelectron spectroscopy of nanocrystalline Ho3Al5O12

Nanocrystalline holmium aluminium garnet (Ho₃Al₅O₁₂) has been prepared for the first time by modified Pechini's reaction after sintering the precursor gel at 1223 K. The nanomaterial has been characterized by X‐ray diffraction (XRD), selected area electron diffraction (SAED) and high resolution transmission electron microscopy (HRTEM). The XRD pattern confirms the formation of single‐phase Ho₃Al₅O₁₂; the average size of the nanoparticles has also been determined. X‐ray photoelectron spectroscopy (XPS) has been used to study the chemical composition and bonding in the as‐prepared samples. The binding energies of core‐level electrons in Ho, Al and O in the title material have been found slightly shifted compared to the values of the respective elements. DC magnetic susceptibility has been measured in the temperature range 2 – 260 K. Low effective magnetic moment of Ho³⁺, μ_eff = 1.35 µ_B and Weiss constant have been derived from the inverse magnetic susceptibility–temperature linear plot. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The influence of silicon on the crystallographic phases of the niobium-gallium system studied by x-ray diffraction methods

The influence of silicon on the crystallographic phases of the binary niobium-gallium system is studied by X-ray diffraction methods. The samples were prepared by rapid quenching. Silicon substituted gallium in all phases of the binary system. It exists a complete pseudobinary solid solution Nb₅Ga₃-Nb₅Si₃. The maximum degree of substitution in the A 15 phase Nb₃Ga_1–xSi_x is x = 0.5. The presence of two A 15 phases with different cell parameters indicates the existence of a miscibility gap. Contrary to the expections the supercondusting transition temperatures decreases with an increasing degree of substitution.     

Growth of LaBGeO5 crystal fibers by the micro‐pulling down technique

The LaBGeO₅ compound (LBGO) was prepared by solid state reaction at 1050°C and characterized by XRD and DTA analysis. The direct growth of LBGO fibers from the melt using micro‐pulling down technique was unsuccessful because of its high viscosity. The study of the LBGO‐LiF phase diagram showed that LiF could be considered as a convenient flux to reduce viscosity of the melt during the growth process. Several crystal fibers were then grown and characterized by Raman spectroscopy. To decrease the high volatility of LiF, B₂O₃ was added to the melt. A white cloudy fiber was obtained from LiF‐B₂O₃ flux and checked by Raman spectroscopy and scanning electron microscopy.     

The Particularities of Infinite‐Layer Compounds Sr1–xLnxCuO2–δ (Ln=La,Pr, Nd,Eu)

The superconducting phases with general formula Sr_1–xLn_xCuO_2–δ with Ln=La (Tc=24…40K); Pr (Tc=30…44 K); Nd (Tc=8K…40 K); Eu (Tc…40 K) and non‐superconducting phases of CaCuO₂– type structure were prepared by high‐pressure synthesis. The products were examined by X‐ray powder diffraction. For the determination of composition Rietveld method was used. Structure investigations have shown that non‐superconducting phases have oxygen vacancies. With in the Cu formal charge range from 1.81 to 1.93 the infinite layer cuprates exhibit superconductivity. Coexistence of both superconducting and non‐superconducting phases of the CaCuO₂–type structure in samples with Ln=Nd and Eu was found.     

High-temperature Raman spectroscopy and phase transformations in phosphates and vanadates Ca3 ? 3xNd2x(AO4)2 (A = P, V; 0 ≤ x ≤ 0.14)

The phases of variable composition Ca_{3 − 3x} Nd_2x (AO₄)₂ (A = P, V; 0 ≤ x ≤ 0.14) based on calcium orthophosphate or orthovanadate are studied by Raman spectroscopy. The influence of the composition and temperature on the structural features of these compounds is considered. The changes observed in the Raman spectra at high temperatures are associated with the reversible phase transition due to the redistribution of calcium over different positions and partial reorientation of the AO₄ tetrahedra. __________ Translated from Kristallografiya, Vol. 49, No. 2, 2004, pp. 262–265. Original Russian Text Copyright ? 2004 by Kovyazina, Perelyaeva, Leonidova, Leonidov, Ivanovskii. This work was presented at the National Conference on Crystal Growth (NCCG-2002, Moscow).