Intramolecularly donor-stabilized silenes: Part 6. The synthesis of 1-[2,6-bis(dimethylaminomethyl)phenyl]silenes and their reaction with aromatic aldehydes

The intramolecularly donor-stabilized silenes ArR¹SiC(SiMe₃)₂ (3a–d) (3a: R¹ = Me; 3b: R¹ = t-Bu; 3c: R¹ = Ph; 3d: R¹ = SiMe₃; Ar = 2,6-(Me₂NCH₂)₂C₆H₃) were prepared by treatment of the (dichloromethyl)oligosilanes (Me₃Si)₂R¹Si–CHCl₂ (1a–d), with 2,6-bis(dimethylaminomethyl)phenyllithium (molar ratio 1:2). For 3c and 3d, X-ray structural analyses were performed indicating that only one dimethylamino group of the tridentate ligand is coordinated to the electrophilic silene silicon atoms, i.e., the central silicon atoms are tetracoordinated. The N → Si donation leads to pyramidalization at the silene silicon atoms; the configuration at the silene carbon atoms is planar. For a chemical characterization 3a and 3c were treated with water to give the silanols ArR¹Si(OH)–CH(SiMe₃)₂ (5a,c). Studies of the reactions of 3a and 3c with benzaldehyde, 4-chlorobenzaldehyde or 4-methoxybenzaldehyde, respectively, revealed an unexpected reaction path leading to the substituted 2-oxa-1-sila-1,2,3,4-tetrahydronaphthalenes 12a, 12c, 13 and 14. Both 12a and 12c were structurally characterized by X-ray analyses. The formation of these six-membered cyclic compounds, which is discussed in detail, gives support to a dipolar mechanism for the general reaction of silenes with carbonyl derivatives.     

Palladium(II) complexes with the new P,N-type ligand (2-oxazoline-2-ylmethyl)di-isopropylphosphine as intermediates in CO/ethylene or CO/methyl acrylate insertion

The ligand (i-Pr)₂PCH₂(oxazoline) (1a), of the P,N-donor type, was reacted with [PdMeCl(COD)] to yield the square planar methylpalladium(II) complex [PdClMe(P,N)] (P,N = 1a) (2a), from which the complex [PdMe(P,N)OTf] (OTf = OSO₂CF₃) (3a) was obtained by AgOTf-promoted chloride abstraction. The alkyl complexes

(P,N = 1a) (5a, R = H; 7a, R = C(O)OMe) have been isolated from the initial CO/ethylene or CO/methyl acrylate insertion steps into the Pd–Me bond of 3a, respectively, and spectroscopically characterized. Complexes 2a, 3a and 7a have been fully characterized by single crystal X-ray diffraction. Complex 7a is still a rare example of a structurally characterized CO/methyl acrylate stepwise insertion product. These complexes are relevant to the alternating copolymerization of olefins and carbon monoxide catalyzed by palladium complexes. In addition, the centrosymmetric dinuclear complex trans-[Pd(μ-Cl){(i-Pr)₂PCH₂(oxazoline)}]₂(OTf)₂ (6) has been obtained and characterized by X-ray diffraction; it appears to be the first dinuclear complex of the type [Pd(μ-Cl)(P,N)]₂ to be characterized by X-ray crystallography.

Résumé

Le ligand (i-Pr)₂PCH₂(oxazoline) (1a), de type donneur P,N, réagit avec [PdClMe(COD)] pour former le complexe plan carré méthylpalladium(II) [PdClMe(P,N)] (P,N = 1a) (2a), à partir duquel le complexe [PdMe(P,N)OTf] (OTf = OSO₂CF₃) (3a) a été obtenu par abstraction de chlorure à l'aide de AgOTf. Les complexes alkyles

(P,N = 1a) (5a, R = H; 7a, R = C(O)OMe), ont été isolés lors des premières étapes d'insertion de CO/éthylène ou de CO/acrylate de méthyle, respectivement, dans la liaison Pd–Me de 3a, et caractérisés par méthodes spectroscopiques. Les complexes 2a, 3a et 7a ont été complètement caractérisés par diffraction des rayons X sur monocristal. Le complexe 7a est un exemple encore rare de produit d'insertion par étapes de CO/acrylate de méthyle qui ait été caractérisé structuralement. Ces complexes sont pertinents pour la copolymérisation alternée d'oléfines et de monoxyde de carbone catalysée par les complexes du palladium. En outre, le complexe dinucléaire centrosymétrique trans-[Pd(μ-Cl){(i-Pr)₂PCH₂(oxazoline)}]₂(OTf)₂ (6) a été obtenu et caractérisé par diffraction des rayons X; il s'agit du premier complexe dinucléaire de type [Pd(μ-Cl)(P,N)]₂ à être caractérisé par diffraction des rayons X.     

Heavy cyclopropene analogues R4SiGe2 and R4Ge3 (R = SiMetBu2) – New members of the cyclic digermenes family

1H-Siladigermirene R₄SiGe₂ (2a) and 1H-trigermirene R₄Ge₃ (2b) (R = SiMe^tBu₂) with a GeGe double bond were synthesized by the reaction of tetrachlorodigermane RGeCl₂–GeCl₂R with dilithiosilane R₂SiLi₂ and dilithiogermane R₂GeLi₂, respectively. The skeletal GeGe double bond of 2a is trans-bent (51.0(2)°) with a bond distance of 2.2429(6) Å. The reaction of both 2a and 2b with CH₂Cl₂ resulted in the formation of unusual four-membered ring compounds 5a and 5b as a result of a ring expansion reaction. 1H-Trisilirene 7a and 3H-disilagermirene 7b with an SiSi double bond also smoothly reacted with CH₂Cl₂ to yield the four-membered ring systems 8a and 8b, respectively.     

Reaction of isocyanides with iminophosphorane-based carbene ligands: Synthesis of unprecedented ketenimine–ruthenium complexes

The RuC bond of the bis(iminophosphorano)methandiide-based ruthenium(II) carbene complexes [Ru(η⁶-p-cymene)(κ²-C,N-C[P{NP(O)(OR)₂}Ph₂]₂)] (R = Et (1), Ph (2)) undergoes a C–C coupling process with isocyanides to afford ketenimine derivatives [Ru(η⁶-p-cymene)(κ³-C,C,N-C(CNR′)[P{NP(O)(OR)₂}Ph₂]₂)] (R = Et, R′ = Bz (3a), 2,6-C₆H₃Me₂ (3b), Cy (3c); R = Ph, R′ = Bz (4a), 2,6-C₆H₃Me₂ (4b), Cy (4c)). Compounds 3–4a–c represent the first examples of ketenimine–ruthenium complexes reported to date. Protonation of 3–4a with HBF₄ · Et₂O takes place selectively at the ketenimine nitrogen atom yielding the cationic derivatives [Ru(η⁶-p-cymene)(κ³-C,C,N-C(CNHBz)[P{NP(O)(OR)₂}Ph₂]₂)][BF₄] (R = Et (5a), Ph (6a)).     

Synthesis of electron-rich platinum centers: Platinum0(carbene)(alkene)2 complexes

The synthesis and molecular structure of the zero-valent platinum-mono-carbene-bis-alkene complexes [Pt⁰(NHC)(dimethyl fumarate)₂] (NHC = 1,3-dimesityl-imidazol-2-ylidene (1a); 1,3-dimesityl-dihydroimidazol-2-ylidene (2a); diphenyl-dihydroimidazol-2-ylidene (2b) are described. Two routes have been evaluated for the synthesis of 1a and 2a, involving reaction of a zero-valent platinum compound either with an isolated carbene ligand, or with an in situ generated carbene ligand. The in situ method proved to be easier and gave similar yields of about 50% after crystallization. Attempts have been made to synthesize similar compounds with N-phenyl and N-alkyl groups, of which the latter met with little success. However, (1,3-diphenyl-dihydroimidazol-2-ylidene)-bis(η²-dimethyl fumarate) platinum(0) (2b) could be obtained in 49% yield, after crystallization, from the appropriate Wanzlick dimer.Compound 1a reacts with H₂ and D₂ in sequences of oxidative addition, migration–insertion involving dimethyl fumarate, and reductive elimination to form neutral hydrido platinum (II) carbene complexes, probably containing a metallacyclic (R)–CO … Pt unit.     

A new luminescent sulfate bridged dimeric copper(II) complex with DNA binding and SO2 fixation ability: Synthesis and structure

New luminescent mononuclear and dinuclear copper(II) (S = 1/2) complexes [Cu(HL)(H₂O)₂](ClO₄)₂ (1a) and [Cu₂(HL)₂(μ-SO₄)₂]·2H₂O (1b) were synthesized with the acyclic tridentate pyridine-2-carboxaldehyde-2-pyridylhydrazone ligand, HL (1). Interestingly, the mononuclear complex 1a can be converted into the disulfate bridged dimeric copper(II) complex 1b by passing freshly prepared SO₂ through the basic medium. On excitation at 290 nm, the ligand fluoresces at 364 nm due to an intraligand ¹(π–π1) transition. Upon complexation with copper(II), the emission peak is slightly blue shifted (356 nm, F/F₀ 0.76 for 1a and 354 nm, F/F₀ 0.89 for 1b) with a little quenching in the emission intensity. The association constants (K_ass (5.06 ± 0.004) × 10⁴ for 1a and K_ass (5.46 ± 0.006) × 10⁴ for 1b at 298 K) and the thermodynamic parameters have been determined by UV–Vis spectroscopy. The molecular structure of the complex 1b (Cu?Cu 4.456 Å) has been determined by single crystal X-ray diffraction studies. The complex 1b exhibits a strong interaction towards DNA as revealed from the K_b (intrinsic binding constant) 6.3 × 10⁴ M^?1 and K_sv (Stern–Volmer quenching constant) 2.93 values.     

Asymmetric hydrogenation reactions with Rh and Ru complexes bearing phosphine–phosphites with an oxymethylene backbone

Phosphine–phosphites 3a and 3b, derived from diphenylhydroxymethyl phosphine have been prepared. From these ligands [Rh(COD)(3a)]BF₄ 5a and RuCl₂(3b)[(S,S)-DPEN] 6b (DPEN = 1,2-diphenylethylenediamine) were synthesized and their structure determined by X-ray diffraction. Ligands 3 are characterized by a small bite angle of 83°. In addition, 5a led to an active catalyst for the hydrogenation of olefins, giving enantioselectivities of up to 96% ee. Likewise, compound 6b showed good activity and enantioselectivity in the hydrogenation of N-1-phenyl ethylidene aniline and a completed reaction at S/C = 500 in 24 h with 83% ee.     

Synthesis and molecular structures of S-2-FcNHCOC6H4SH and [MIII(OEP)(S-2-FcNHCOC6H4)] (Fc = ferrocenyl,M = Fe,Ga): Electrochemical contributions of intramolecular SH⋯OC and NH⋯S hydrogen bonds

A novel redox-active thiolate ligand having a ferrocene moiety, S-2-FcNHCOC₆H₄SH (1a), and its porphyrin-thiolate compounds, [M^III(OEP)(S-2-FcNHCOC₆H₄)] (M = Fe (2a), Ga (3a)) were synthesized and characterized by X-ray analysis, spectroscopic and electrochemical measurements. The corresponding 4-substituted derivatives (1b–3b) were also synthesized to estimate the contribution of substituent effects. The formation of intramolecular SH⋯OC or NH⋯S hydrogen bonds in solution was established by ¹H NMR and IR spectra. The cooperative effects of the hydrogen bonds and π-conjugation were found on redox potentials of Fc and iron-porphyrin moieties.     

Highly enantioselective enzymatic resolution of aromatic β-amino acid amides with Pd-catalyzed racemization

The kinetic resolution of an aromatic β-amino acid amide 3a–d via N-acylation was explored with two lipases, Candida antarctica lipase A (CALA) and Pseudomonas stutzeri lipase (PSL). The PSL-catalyzed resolution proceeded with excellent enantioselectivity (E = >400) to give both acylated products and unreacted substrates in enantiopure forms. Three additional aromatic β-amino acid amides 3b–d were also resolved by PSL with a high level of enantioselectivity (E = >200). The PSL-catalyzed resolution of 3a was coupled with a Pd-catalyzed racemization to obtain enantiopure N-acylated product (R)-4a (>99% ee) in high yield (90%).     

Preparation of various enantiomerically pure (benzotriazol-1-yl)- and (benzotriazol-2-yl)-alkan-2-ols

(S)-(−)-(Benzotriazol-1-yl)- and (S)-(−)-(benzotriazol-2-yl)-alkan-2-ols 7a–9a, 7b–9b and their (R)-(+)-acetates 10a–12a and 10b–12b were prepared in high enantiomeric excess via lipase from Pseudomonas fluorescens (Amano AK) catalyzed enantioselective acetylation of racemic alcohols 4a–6a and 4b–6b with vinyl acetate in tert-butyl methyl ether or toluene at 23 °C. The enantioselectivity of this transformation was dependent on the length of the alkyl chain with E-values ranging from 30 to 57. Several benzotriazole substituted ketones 1a–3a and 1b–3b were synthesized from 1H-benzotriazole and corresponding haloketones. These compounds were stereoselectively reduced with Baker’s yeast in water or in organic solvent containing 5% v/v of water at 30 °C to give the (S)-(−)-alcohol. Better stereoselectivity was observed in the kinetic resolution of racemic alcohols 4a–6a and 4b–6b (ee = 69–92% at 44–52% conversion) compared to reduction of corresponding prochiral ketones 1a–3a and 1b–3b with Baker’s yeast (ee = 40–67% at 39–89% conversion). Enhanced enantioselectivities were observed at lower temperatures.     

Versatile Ru-based metathesis catalysts designed for both homogeneous and heterogeneous processes

The synthesis of new ruthenium-based catalysts applicable for both homogeneous and heterogeneous metathesis is described. Starting from the Hoveyda-Grubbs first generation (1) and the Hoveyda-Grubbs second generation (2) catalysts the homogeneous catalysts [RuCl((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(SIMes)] (4: R = Et, R′ = H; 5: R = R′ = Me) (SIMes = 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene) were prepared by substitution of one chloride ligand with trialkoxysilyl functionalized silver carboxylates (RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COOAg (3a: R = Et, R′ = H; 3b: R = R′ = Me). These homogeneous ruthenium-species are among a few known examples with mixed anionic ligands. Exchange of both chloride ligands afforded the catalysts [Ru((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(SIMes)] (9: R = Et, R′ = H; 11: R = R′ = Me) and [Ru((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(PCy₃)] (8: R = Et, R′ = H; 10: R = R′ = Me). The reactivity of the new complexes was tested in homogeneous ring-closing metathesis (RCM) of N,N-diallyl-p-toluenesulfonamide and TONs of up to 5000 were achieved. Heterogeneous catalysts were obtained by reaction of 4, 5 and 8–11 with silica gel (SG-60). The resultant supported catalysts 4a, 5a, 8a–11a showed reduced activity compared to their homogenous analogues, but rival the activity of similar heterogeneous systems.     

Supramolecular chemistry and the control of the crystallization behavior by the choice of the counter-ion. Part 11. The stereochemistry and crystallization architecture of [(tren)Co(NO2)2]A (I), [(tren)Co(ox)]A (II), [(en)2Co(ox)]A (III) and [trans-(pn)2Co(NO2)2]A (IV), with A = [trans-(NH3)2Co(NO2)4]

In continuation of studies carried out previously [I. Bernal, Inorg. Chim. Acta 96 (1985) 99; I. Bernal, Inorg. Chim. Acta (1986) 121; I. Bernal, E.O. Schlemper, C.K. Fair, Inorg. Chim. Acta 115 (1986) 25; I. Bernal, Inorg. Chim. Acta 101 (1985) 175; I. Bernal, J. Cetrullo, J. Coord. Chem. 20 (1989) 237], we have now expanded the nature and number of cations associated with the [trans-(NH₃)₂Co(NO₂)₄] anion in order to better document when, and how, this helical propeller species crystallizes as a conglomerate.[(tren)Co(NO₂)₂][trans-(NH₃)₂Co(NO₂)₄] (I) crystallizes as a racemate in space group P2₁/n with cell constants of a = 15.8900(2), b = 19.7800(3), c = 26.6200(4) Å, β = 101.970(3)°, z = 15.[(tren)Co(ox)][trans-(NH₃)₂Co(NO₂)₄] (II) crystallizes as a racemate in space group I2/a with cell constants of a = 21.592(11), b = 7.050(4), c = 26.46(2) Å, β = 93.09(6)°, z = 8.[(en)₂Co(ox)][trans-(NH₃)₂Co(NO₂)₄] (III) crystallizes as a racemate in space group P2₁/n with cell constants of a = 6.4740(1), b = 22.8950(6), c = 13.1660(3) Å, β = 97.3310(10)°, z = 4.[trans-(pn)₂Co(NO₂)₂][trans-(NH₃)₂Co(NO₂)₄] (IV) also crystallizes as a racemate in space group P(¯1; no. 2) with cell constants of a = 6.508(2), b = 8.829(5), c = 9.851(5) Å, α = 72.84(2), β = 80.15(3), and γ = 81.45(6)°, z = 1.The most notable results are as follows: (1) all four compounds studied are racemates unlike the previously studied [cis-Co(en)₂(NO₂)₂][trans-(NH₃)₂Co(NO₂)₄] [I. Bernal, Inorg Chim Acta 101 (1985) 175] (V) and K[trans-(NH₃)₂Co(NO₂)₄] (VI) that crystallize as conglomerates. Nevertheless, they share certain crystalline features, which are readily observed in their packing diagrams.In all the four cases the new data were collected at 295 K and 120 K, using Mo Kα radiation; the former with a Nonius CAD-4 diffractometer and the latter with a Nonius CCD instrument. Of primary interest to us are the changes in packing caused by repeated changes in the charge compensating cations. Comparisons with the packing observed previously in [cis-Co(en)₂(NO₂)₂][trans-(NH₃)₂Co(NO₂)₄] (V) and K[trans-(NH₃)₂Co(NO₂)₄] (VI) are made since, at the time of publications of those early papers, no detailed study of the packing characteristics of these anions was published and the existing graphic software were primitive compared with the current packages. This oversight is remedied below.     

Cyclic (alkyl)(amino)carbene gold(I) complexes: A synthetic and structural investigation

A series of mono- and dicarbene gold(I) complexes of types Au(CAAC)(Cl) [CAAC = cyclic (alkyl)(amino)carbene] (1) and [Au(CAAC)₂]⁺[X]^? (X = Cl, AuCl₂) (2) have been prepared through reaction of AuCl(SMe₂) with free carbenes a–e, and structurally characterized by single X-ray diffraction studies (1a, 1b, 2d, 2e). In addition two new free cyclic (alkyl)(amino)carbenes (c and e) have been synthesized.     

Iridium aminyl radical complexes as catalysts for the catalytic dehydrogenation of primary hydroxyl functions in natural products

The cationic tetra-coordinated 16 electron complex [Ir(trop₂dach)]⁺OTf⁻ (1) where (OTf⁻ = CF₃SO₃⁻) and the neutral amine amido complex [Ir(trop₂dach-1H)] (2) were isolated and structurally characterized. The NH function in 1 is easily deprotonated (pK_a^DMSO = 10.5) to yield the amino amido complex [Ir(trop₂dach-1H)] (2), which is deprotonated at pK_a^DMSO = 19.6 to the anionic di(amido) iridate [Ir(trop₂dach-2H)]⁻ (3); [(R,R)-top₂dach stands for the tetrachelating diamino diolefin ligand (R,R)-N,N′-bis(5H-dibenzo[a,d]cyclohepten-5-yl)-1,2-diaminocyclohexane; (R,R)-top₂dach-1H and (R,R)-top₂dach-2H indicate the mono and double deprotonated form]. Complex 3 is easily oxidized by 1,4-benzoquinone (BQ) to the neutral iridium aminyl radical complex [Ir(trop₂dach-2H)] (4). In combination with BQ as hydrogen acceptor and catalytic amounts of base, 4 serves as catalyst in the highly efficient dehydrogenation of functionalized primary alcohols to the corresponding aldehydes, RCH₂OH + BQ → RCHO + H₂BQ (H₂BQ = catechol). Alcohols like geraniol and retinol are rapidly converted to geranial and retinal, while the conversion of sterically hindered alcohols like lavandulol is slower and the primary product, lavandulal, isomerizes to isolavandulal in a classical base-catalyzed reaction.     

A convenient route to six-membered heterocyclic carbene complexes: Reactions of aminoallenylidene complexes with 1,3-bidentate nucleophiles

Pentacarbonyl dimethylamino(methoxy)allenylidene complexes of chromium and tungsten, [(CO)₅MCCC(NMe₂)OMe] (M = Cr (1a), W (1b)), react with 1,3-bidentate nucleophiles such as amidines and guanidine, H₂N–C(NH)R (R = Ph, C₆H₄NH₂-4, C₆H₄NO₂-3, NH₂), by displacing the methoxy substituent to give exclusively dimethylamino(imino)-allenylidene complexes, [(CO)₅MCCC{NC(NH₂)R}NMe₂] (2a–5a, 2b). Treatment of the chromium complexes 2a–5a with catalytic amounts of hydrochloric acid or HBF₄ gives rise to an intramolecular cyclization. Addition of the terminal NH₂ substituent to the C_α–C_β bond of the allenylidene chain affords pyrimidinylidene complexes 6–9 in high yield. In contrast to the chromium complexes 2a–5a, the corresponding tungsten complex 2b could not be induced to cyclize due to the lower electrophilicity of the α-carbon atom in 2b. The dimethylamino(phenyl)allenylidene complex [(CO)₅CrCCC(NMe₂)Ph] (10) reacts with benzamidine or guanidine similarly to 1a. However, the second reaction step – cyclization to give pyrimidinylidene complexes – proceeds much faster. Therefore, the formation of an imino(phenyl)allenylidene complex as an intermediate is established only by IR spectroscopy. The analogous reaction of 10 with 3-amino-5-methylpyrazole affords, via a formal [3+3]-cycloaddition, a pyrazolo[1,5a]pyrimidinylidene complex 13. Compound 13 is obtained as two isomers differing in the relative position of the N-bound proton (1H or 4H). The related reaction of 10 with thioacetamide yields a thiazinylidene complex and additionally an alkenyl(amino)carbene complex.     

Synthesis and characterization of thiosemicarbazone derivatives of 2-chloro-4-hydroxy-benzaldehyde and their rhenium(I) complexes

N-Thioamide thiosemicarbazone derived of 2-chloro-4-hydroxy-benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. Complexes 1a′ and 1b’ were also obtained by the reaction of HL¹ and HL³ with [ReBr(CO)₅] in toluene.All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³ and 1a·H₂O were also established by X-ray diffraction. In 1a, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms, forming a five-membered chelate ring, as well as three carbonyl carbon and chloride atoms. The resulting coordination polyhedron can be described as a distorted octahedron.The study of the crystals obtained by slow evaporation of methanol and DMSO solutions of the adducts 1a′ and 1b, respectively, showed the formation of dimer structures based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆]·3H₂O (2a)·3H₂O and [Re₂(L²)₂(CO)₆]·(CH₃)₂SO (2b)·2(CH₃)₂SO. Amounts of these thiosemicarbazonate complexes [Re₂(L)₂(CO)₆] (2) were obtained by reaction of the corresponding free ligands with [ReCl(CO)₅] in dry toluene.In 2a·3H₂O and 2b·2(CH₃)₂SO the dimer structures are established by Re–S–Re bridges, where S is the thiolate sulphur from a N,S-bidentate thiosemicarbazonate ligand. In both structures the rhenium coordination sphere is similar; the dimers are in the same diamond Re₂S₂ face.     

Ruthenium-catalyzed intramolecular cyclization of hetero-functionalized allylbenzenes

Intramolecular addition of heterofunctionalities to CC double bonds without β-hydride elimination was investigated and catalyzed by ruthenium complexes. The combination of RuCl₃ · nH₂O (10 mol%) and 3 equiv. of AgOTf acted as a catalyst for cyclization of 2-allylphenol (1a) to 2,3-dihydro-2-methylbenzofuran (2a) in good yield in the presence of Cu(OTf)₂ as a co-catalyst and PPh₃ as a ligand. This catalyst system also catalyzed the cyclization of 2-allylbenzoic acid to lactone in 91% yield. Then, a new catalyst system (RuCp¹Cl₂)₂ (1.0 mol%)/4AgOTf/4PPh₃, was found to be more active even in the absence of Cu(OTf)₂. Furthermore, this catalysis was applied to asymmetric reaction of 2-allylphenol (1a). When using TolBINAP as a ligand, over 60% e.e. was achieved.     

An expedient approach to ferrocenyl thioamides via Fischer carbenes

Oxidative demetalation of Fischer ferrocenyl ethoxy carbene complexes (1a–c, M = Cr, Mo, W) and new Fischer ferrocenyl R-amino carbene complexes [2–5 (a–c), 11–15 (a–c), and 21–22 (a–c); M = Cr, Mo, W; R = H, CH₃, C₂H₅, C₃H₇, (CH₂)₂OH, (CH₂)₃OH, (CH₂)₂(OMe)₂, (CH₂)₃N(Me)₂, CH₂CHCH₂, (CH₂)₂OSi(CH₃)₃, (CH₂)₃OSi(CH₃)₃] with elemental sulfur–NaBH₄ were carried out under mild conditions, obtaining O-ethyl ferrocenecarbothioate (6) and novel ferrocenyl thioamides (7–10 and 16–20) in excellent yields.