Rapid synthesis of dendrite‐ and platelet‐like α‐Fe2O3 via a hydrothermal oxidation route

Dendrite and platelet‐like α‐Fe₂O₃ microcrystals were synthesized by the oxidation reaction of K₄Fe(CN)₆and NaClO₃ through a simple hydrothermal method. The structures and morphologies of the as‐prepared samples were characterized in detail by X‐ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The experiment results show that NaOH played an important role in controlling the morphology of the final products. The possible mechanism was discussed to elucidate the formation of different morphologies of the α‐Fe₂O₃ microstructures. Besides, the magnetic property of the dendrite α‐Fe₂O₃ microstructure was characterized by a vibrating sample magnetometer (VSM). (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

α‐Fe2O3 nanospindles loaded with ZnO nanocrystals: Synthesis and improved gas sensing performance

ZnO/α‐Fe₂O₃ nanocomposites were fabricated through a two‐step hydrothermal method. The morphology and composition of the as‐synthesized products were characterized by X‐ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM), energy‐dispersive X‐ray spectroscopy (EDS), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The gas sensing properties of the fabricated products were investigated towards ethanol, acetone, propanol, isopropanol, formaldehyde, chloroform and so on. The results demonstrated that the ZnO/α‐Fe₂O₃ nanocomposites exhibited excellent sensing properties and showed remarkably higher sensing responses and much lower optimum operating temperature compared to individual ZnO and α‐Fe₂O₃. In addition, the ZnO/α‐Fe₂O₃ nanocomposites have some selectivity for ethanol, propanol and isopropanol. The possible gas sensing mechanism was also proposed. Our studies demonstrate that our fabricated materials could be widely used in the future.     

Synthesis of spindle‐shaped α‐FeOOH and α‐Fe2O3 nanocrystals

Spindle‐shaped α‐FeOOH nanocrystals were facilely synthesized using a poly (vinyl pyrrolidone) (PVP)‐assisted route under hydrothermal conditions. The chemical compositions and morphol‐ogies of the as‐prepared samples were characterized in detail by X‐ray power diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscope (TEM). The experimental results reveal that these spindle‐shaped α‐FeOOH nanocrystals have self‐organized into assemblies with hierarchical nanostructures. The crucial roles of PVP in the hydrothermal synthesis of hierarchical α‐FeOOH nanostructures were discussed. The possible formation mechanism was also suggested. Moreover, the spindle‐shaped α‐Fe₂O₃ nanocrystals could be easily obtained after calcining the α‐FeOOH prepared by the PVP‐assisted hydrothermal process. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and properties of α‐Fe2O3 nanorods

We report synthesis of α‐Fe₂O₃ (hematite) nanorods by reverse micelles method using cetyltrimethyl ammonium bromide (CTAB) as surfactant and calcined at 300 °C. The calcined α‐Fe₂O₃ nanorods were characterized by X‐ray diffraction (XRD), high‐resolution scanning electron microscopy (HRSEM), transmission electron microscopy (TEM), energy dispersive spectrometer (EDS), fourier transform infrared spectroscopy (FTIR) and vibrating sample magnetometer (VSM). The result showed that the α‐Fe₂O₃ nanorods were hexagonal structure. The nanorods have diameter of 30‐50 nm and length of 120‐150 nm. The weak ferromagnetic behavior was observed with saturation magnetization = 0.6 emu/g, coercive force = 25 Oe and remanant magnetization = 0.03 emu/g. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation of shuttle‐like Sb2S3 nanorod‐bundles via a solvothermal approach under alkaline condition

Uniform shuttle‐like Sb₂S₃ nanorod‐bundles were synthesized via a polyvinylpyrrolidone (PVP) assisted solvothermal approach under alkaline condition, using antimony chloride (SbCl₃) and thiourea (CH₄N₂S, Tu) as the starting materials in ethanol. The phase structure, composition and morphology of the product were characterized by means of X‐ray diffraction (XRD), energy dispersive X‐ray spectrometry (EDS), transmission electron microscopy (TEM), and high‐resolution transmission electron microscopy (HRTEM). XRD and EDS results confirm that the synthesized Sb₂S₃ nanorod‐bundles have an orthorhombic structure and an atomic ratio of 3:2 for S:Sb. TEM and HRTEM results show that the shuttle‐like Sb₂S₃ bundles are composed of nanorods with a size distribution of 20‐40 nm and growing along c‐axis. Furthermore, experiments under different reaction conditions were carried out and the mechanism for the growth of nanorod‐bundles was discussed (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A template‐free route for controlled synthesis of dumbbell‐like Sb2S3 microcrystals

Large amounts of dumbbell‐like Sb₂S₃ microcrystals were synthesized via a simple solvothermal treatment method. Various techniques such as x‐ray diffraction (XRD), field‐emission scanning electron microscope (FESEM), high‐resolution transmission electron microscope (HRTEM), selected area electron diffraction (SAED), and photoluminescence spectrometry (PL) have been used to characterize the obtained products. The results showed that the products belong to the orthorhombic Sb₂S₃ phase, and the dumbbell‐like Sb₂S₃ microcrystals were composed by uniform microrods. Besides, the morphologies of Sb₂S₃ microcrystals could be changed from microshperes to dumbbell‐like microcrystals by only adjusting the reaction solvent. The solvent effects are discussed in detail. Furthermore, the PL properties of the obtained Sb₂S₃ microcrystals clearly show shape effects. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Low‐temperature urea‐assisted hydrothermal synthesis of Bi2S3 nanostructures with different morphologies

Different morphologies of single‐crystalline orthorhombic phase bismuth sulfide (Bi₂S₃) nanostructures, including sub‐microtubes, nanoflowers and nanorods were synthesized by a urea‐assisted hydrothermal method at a low temperature below 120 °C for 12 h. The as‐synthesized powders were characterized by X‐ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM) and UV‐vis spectrophotometry. The experimental results showed that the sulfur sources had a great effect on the morphology and size of the resulting powders. The formation mechanism of the Bi₂S₃ nanostructures with different morphologies was discussed. All Bi₂S₃ nanostructures showed an appearance of blue shift relative to the bulk orthorhombic Bi₂S₃, which might be ascribed to the quantum size effect of the final products. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Catanionic surfactants assisted synthesis of dilead pentaoxochromate nanorods

Single‐crystalline dilead pentaoxochromate (Pb₂CrO₅) with nanorod‐shape has been synthesized by adjusting the pH value of the catanionic reverse micelles formed by a cationic surfactant CTAB (hexadecyltrimethylammonium bromide) and an anionic surfactant SDS (sodium dodecyl sulfonate), followed by a hydrothermal process. The results show that reaction parameters play important roles in the formation of the single‐crystalline Pb₂CrO₅. The reaction parameters include the kinds of the surfactants, the molar ratio (r) between the mixed cationic and anionic surfactants, reaction time and temperature. The as‐synthesized products are characterized by transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM) and powder X‐ray diffraction (XRD). (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Facile solvothermal synthesis,growth mechanism and thermoelectric property of flower‐like Bi2Te3

Hierarchical flower‐like Bi₂Te₃ was synthesized through a facile solvothermal method. The crystal structure and morphology of the as‐prepared samples were characterized by X‐ray diffraction (XRD), filed emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and high resolution TEM. The reaction parameters such as reaction time, the amount of glucose, concentration of NaOH and the reaction temperature were systematically investigated. Based on the FESEM observations, a possible mechanism defined as a self‐assembly process accompanied by anisotropic growth mechanism was proposed. Moreover, the thermoelectric properties were measured at the temperature range of 300–600 K. The hierarchical flower‐like Bi₂Te₃ presented good thermoelectrical properties. The maximum ZT value reached up to 0.6 at 600 K, which was higher than that of Bi₂Te₃ nanoparticles.     

Hydrothermal synthesis of nano‐crystalline BaMoO4 under mild conditions using simple additive

Large‐scale high‐quality BaMoO₄ nanocrystals have been synthesized in aqueous solutions under mild conditions with citrate as a simple additive. The crystals have bone‐like, spindle‐like and wheatear‐like morphologies assembled from nanoparticles, nanofibers and have been characterized by X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) techniques. The results showed that experimental parameters had great influences on the shape evolution of products. The adjustment of these parameters such as room temperature stirring time, reaction temperature and reaction time of hydrothermal reaction, can lead to obvious morphology changes of products, and the growth mechanism has been proposed. Room‐temperature photoluminescence indicated that the as‐prepared BaMoO₄ nanocrystals had a strong blue emission peak at 481.5 nm. This facile route could be employed to synthesize more promising nanomaterials with interesting self‐assembly structures. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Surfactant directed synthesis of mesoporous alumina and α‐alumina single crystal

Mesoporous Al₂O₃ were positively synthesized via treatment of the freshly precipitated amorphous alumina gel using aluminium sulphate as aluminium source, and sodium dodecyl sulphate (SDS) as structure‐directing agent (SDAs). The microstructures, morphologies and textural properties of the as‐prepared materials were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM) and thermo gravimetric analysis (TG‐DTA). The calcined product at 600 °C was highly porous in nature having a BET surface area of 42 m²/g. These porous Al₂O₃ exhibits excellent adsorption performance for Congo red and the corresponding decolourisation efficiencies reached 99% in just 15 min at 27 °C. The subsequent calcined product at 1200 °C is the alpha alumina single crystal hexagonal platelets with rhombohedral crystallization.     

Room‐temperature synthesis and characterization of cross‐like Pr2(C2O4)3·10H2O micro‐particles

Cross‐like Pr₂(C₂O₄)₃·10H₂O micro‐particles were synthesized through a simple precipitation method at room temperature. The products were characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), field‐emission scanning electron microscopy (FESEM), thermogravimetry–differential thermal analysis (TG‐DTA) and photoluminescence (PL). The possible formation mechanism of the cross‐like Pr₂(C₂O₄)₃·10H₂O micro‐particles was discussed, and Pr₆O₁₁ with similar morphology was obtained by calcining the oxalate precursor. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ag@Fe3O4 nanowire: fabrication,characterization and peroxidase‐like activity

With a facile solvothermal method, Ag@Fe₃O₄ nanowire was successfully prepared and characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The obtained Ag@Fe₃O₄ nanowire posses enhanced peroxidase‐like activity with good stability and high absorbance. The optimization of pH, H₂O₂ concentration and loading capacity were carried out. The result of kinetic analysis indicates that the catalyzed reaction followed a Michaelis‐Menten behavior. The good peroxidase‐like activity makes Ag@Fe₃O₄ nanowire be promising for real application in biomedicine.     

Growth and characterization of large La1‐xPbxMnO3+δ (x=0.32–0.35) crystals

Large crystals of La_0.63Pb_0.37Mn O_3+δ with small La(Pb)‐ deficiency of about 0.005‐0.01 at.% were grown by high temperature solution growth method. The structure of the grown crystals was determined as rhombohedral with R‐3 space group by single‐crystal X‐ray diffractometry. The surface morphology of the crystals and the exact chemical composition was examined by scanning electron microscopy and energy dispersive X‐ray analysis methods, respectively. The IR‐transmission spectrum reveals the presence of Mn³⁺O₆‐ and Mn⁴⁺O₆‐ octahedra in the lattice of La_0.63Pb_0.37Mn O_3+δ crystals. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Fabrication of Fe3O4 octahedra by a triethanolamine‐assisted hydrothermal process

Octahedral Fe₃O₄microcrystals were synthesized using a triethanolamine‐assisted route under hydrothermal conditions. The chemical compositions and morphologies of the as‐prepared samples were characterized in detail by X‐ray diffraction (XRD) and scanning electron microscopy (SEM). During the hydrothermal process for the preparation of Fe₃O₄ octahedra, the possible mechanism was discussed to elucidate the formation of the octahedral Fe₃O₄microcrystals. Triethanolamine and hydrazine hydrate play important roles in the formation of the final products. The magnetic property of sample was evaluated on a vibrating sample magnetometer (VSM) at room temperature. The values of saturation magnetization and coercivity of octahedral Fe₃O₄are about 103 emu/g and 157 Oe, respectively. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and characterization of strontium chloroborate whiskers

Single crystalline strontium chloroborate (Sr₂B₅O₉Cl) whiskers with uniform diameter have been synthesized by a facile route based on the calcination of precursor. The precursor was prepared by the sedimentation reaction between SrCl₂ and Na₂B₄O₇ aqueous solution. The products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infrared spectrum (FT‐IR). An optimal synthesis temperature for preparing Sr₂B₅O₉Cl whiskers was obtained, and the possible formation process was also presented.     

Well‐defined Sb2S3 nanostructures: citric acid‐assisted synthesis,electrochemical hydrogen storage properties

Well‐defined (three‐dimensional) 3‐D dandelion‐like Sb₂S₃ nanostructures consisted of numerous nanorods have been achieved via a facile citric acid‐assisted solvothermal process. The as‐prepared products were characterized by X‐ray diffraction (XRD), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and high‐resolution TEM (HRTEM), respectively. The influence factors of the formation of the hierarchical Sb₂S₃ nanostructures are discussed in details based on FESEM characterizations. By simply controlling the quantity of citric acid, the nucleation and growth process can be readily tuned, which brings the different morphologies and nanostructures of the final products. On the basis of a series of contrastive experiments, the aggregation‐based process and anisotropic growth mechanism are reasonably proposed to understand the formation mechanism of Sb₂S₃ hierarchical architectures with distinctive morphologies including nanorods, and dandelion‐like nanostructures. Charge‐discharge curves of the obtained Sb₂S₃ nanostructures were measured to investigate their electrochemical hydrogen storage behaviors. It revealed that the morphology played a key role on the hydrogen storage capacity of Sb₂S₃ nanostructure. The dandelion‐like Sb₂S₃ nanostructures exhibited higher hydrogen storage capacity (108 mAh g⁻¹) than that of Sb₂S₃ nanorods (95 mAh g⁻¹) at room temperature.     

PMA‐b‐PAA‐controlled synthesis of one‐dimensional CaCO3 superstructures

Crystallization of calcium carbonate (CaCO₃) crystals by a gas‐liquid diffusion method has been carried out in aqueous solution using a double‐hydrophilic block copolymer (DHBC) poly(maleic anhydride)‐b‐poly(acrylic acid) (PMA‐b‐PAA). The as‐prepared products were characterized with X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), selected area electron diffraction (SAED), high‐resolution transmission electron microscopy (HRTEM) and infrared spectroscopic analysis (FT‐IR). Uniform one‐dimensional calcite micro/nanostructures with different morphologies are fabricated through an assembled process. The influence of PMA‐b‐PAA copolymer concentration on the morphology of calcite nano/microwires is investigated, which plays an important role in the morphological control of building blocks composed of one‐dimensional calcite crystals. The possible formation mechanism of one‐dimensional CaCO₃ crystals was discussed. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A simple glucose reduction route for the synthesis of sheet‐like copper dendrites

In the current paper we designed a simple glucose reduction route for synthesis of sheet‐like Cu dendrites on a high yield, using CuSO₄ as the starting material. The reaction was carried out at 180 °C for 18 h in the absence of any structure‐directing agent. The product was characterized by X‐ray powder diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and electron diffraction (ED). Some factors influencing the shapes of Cu microcrystals, including the reaction temperature, time, and the concentration of the starting CuSO₄, were investigated. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

PSSS‐controlled synthesis of CaCO3 superstructures

Complex CaCO₃ superstructure can be easily synthesized by using poly (sodium 4‐styrenesulfonate) (PSSS) as a structure directing agent to direct the controlled precipitation of calcium carbonate from aqueous solution. The products were characterized by scanning electron microscopy (SEM), and powder X‐ray diffraction (XRD) analysis. The results revealed that the morphology of the products changed significantly with the increasing of the concentration of PSSS in solution, from rhombohedral particles to plate‐packed aggregates to spheres with smooth surface, to sponge‐like spheres and finally to complex spherical superstructure consisted of plate‐like sub‐units. We hypothesize that the observed sequential changes in morphology of CaCO₃ particles with added PSSS concentration may be due to the influence of PSSS on nucleation, growth and aggregation of CaCO₃ crystals. The formation mechanisms of CaCO₃ crystals with different morphologies were discussed. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)