High resolution adsorption isotherms of N2 and Ar for nonporous silicas and MFI zeolites

The high resolution adsorption isotherms of N₂ (77.4 K) and Ar (87.3 K) have been measured for two nonporous silicas with different silanol contents (3.3 and 0.35 OH/nm²) and for two MFI zeolite with different Al contents (Si/Al=12.5 and 500). Silanol groups and Al sites (acid sites) gives the significant effect on the N₂ isotherms at submonolayer, but the Ar isotherms are independent of silanols and Al sites. The Ar isotherms, therefore, are preferable in calculation of microporosity of zeolites. The N₂ and Ar isotherms for MFI zeolite (Si/Al=500) have been measured at temperatures of 77–94 K, from which the differential adsorption energies of N₂ and Ar are calculated. The interaction of N₂ with channel surface of MFI zeolite is greater than that of Ar in the range of α _s =0.1–0.7. The hystereses are detected for the N₂ isotherm in p/p ^o=0.1–0.3 at 77.4 K and for the Ar isotherm in p/p ^o=3×10⁻⁴–2×10⁻³ at 87.3 K. However, it is difficult to explain the hysteresis phenomenon using differential adsorption energy.     

Preparation of Co–Al and Ni–Al layered double hydroxide thin films by a sol–gel process with hot water treatment

Using hot water treatment of sol–gel derived precursor gel films, Co–Al and Ni–Al layered double hydroxide (LDH) thin films were prepared. The precursor gel films of Al₂O₃–CoO or Al₂O₃–NiO were prepared from cobalt or nickel nitrates and aluminum tri-sec-butoxide using the sol–gel method. Then, the precursor gel films were immersed in a NaOH aqueous solution of 100 °C. Nanocrystallites of Co–Al and Ni–Al LDH were precipitated with the hot water treatment with NaOH solution. The largest amounts of nanocrystals were obtained with a solution of pH = 10 for Co–Al LDH, and with that of pH = 9 for Ni–Al LDH. X-ray diffraction measurements confirmed that this process formed CO₃ ²⁻ intercalated LDHs. Both Co–Al and Ni–Al LDH thin films were confirmed to work as electrodes for electrochemical devices by cyclic voltammogram measurements.     

Effect of annealing atmosphere on structural,optical and electrical properties of Al-doped Zn<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Cd<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O thin films

1 at.% Al-doped Zn_1−x Cd _x O (x = 0–8 at.%) thin films were prepared on glass substrates by sol–gel method. The codoping films retained the hexagonal wurtzite structure of ZnO, and showed preferential c-axis orientation. The effect of annealing ambient (in vacuum and nitrogen) on the optical and electrical properties of (Cd,Al)-codoped ZnO films were investigated using transmission spectra and electrical measurements. The transmittances of the codoping films were obviously degraded by vacuum annealing to 50–60 %, but enhanced to 70–80 % after nitrogen annealing. The carrier concentration and Hall mobility both increased, and resistivity decreased with narrowing band gap of Al-doped Zn_1−x Cd _x O, below different critical concentrations x = 4 % (in vacuum) and x = 6 % (in nitrogen). It is revealed that the conductivity is also improved by Cd doping along with band gap modification. The variations in optical and electrical properties are ascribed to both the changes of the crystallinity and concentration of oxygen vacancies under different ambient. In view of transmittance and conductivity, nitrogen annealing might be a more effective post-annealing way than vacuum annealing for our (Cd,Al)-codoped ZnO films to meet the requirements of transparent conducting oxide (TCO).     

Glycine-assisted hydrothermal synthesis of nanostructured Co x Ni1−x –Al layered triple hydroxides as electrode materials for high-performance supercapacitors

Nanostructured Co _x Ni_1−x –Al layered triple hydroxides (Co _x Ni_1−x –Al LTHs) have been successfully synthesized by a facile hydrothermal method using glycine as chelating agent. The samples were characterized by X-ray diffraction, thermogravimetry, Fourier transform infrared spectroscopy and scanning electron microscopy. The morphologies of Co _x Ni_1−x –Al LTHs varied with the Co content and its effect on the electrochemical behavior was studied by cyclic voltammetry and galvanostatic charge–discharge techniques. Electrochemical data demonstrated that the Co _x Ni_1−x –Al LTHs with Co/Ni molar ratio of 3:2 owned the best performance and delivered a maximum specific capacitance of 1,375 F g⁻¹ at a current density of 0.5 A g⁻¹ and a good high-rate capability. The capacitance retained 93.3% of the initial value after 1,000 continuous charge–discharge cycles at a current density of 2 A g⁻¹.     

Electrocatalytic oxidation of pyridoxine (vitamin B<Subscript>6</Subscript>) on aluminum electrode modified by metallic palladium particles/iron (III) hexacyanoferrate (II) film

The electrocatalytic activity of a Prussian blue (PB) film on the aluminum electrode by taking advantage of the metallic palladium characteristic as an electron-transfer bridge (PB/Pd–Al) for electrooxidation of 2-methyl-3-hydroxy-4,5-bis (hydroxyl–methyl) pyridine (pyridoxine) is described. The catalytic activity of PB was explored in terms of Fe^III [Fe^III (CN)₆]/Fe^III [Fe^II (CN)₆]¹⁻ system. The best mediated oxidation of pyridoxine (PN) on the PB/Pd–Al-modified electrode was achieved in 0.5 M KNO₃ + 0.2 M potassium acetate of pH 6 at scan rate of 20 mV s⁻¹. The mechanism and kinetics of the catalytic oxidation reaction of PN were monitored by cyclic voltammetry and chronoamperometry. The results were explained using the theory of electrocatalytic reactions at chemically modified electrodes. The charge transfer-rate limiting reaction step is found to be a one-electron abstraction, whereas a two-electron charge transfer reaction is the overall oxidation reaction of PN by forming pyridoxal. The value of α, k, and D are 0.5, 1.2 × 10² M⁻¹ s⁻¹, and 1.4 × 10⁻⁵ cm² s⁻¹, respectively. Further examination of the modified electrodes shows that the modifying layers (PB) on the Pd–Al substrate have reproducible behavior and a high level of stability after posing it in the electrolyte or Pyridoxine solutions for a long time.     

Generation of fullerenyl radicals and chemiluminescence in the (C<Subscript>60</Subscript>—R<Subscript>3</Subscript>Al)—O<Subscript>2</Subscript> system

Fullerenyl radicals (FR) RC₆₀ ^· and chemiluminescence (CL) are generated in the presence of O₂ in C₆₀—R₃Al (R = Et, Buⁱ) solutions in toluene (T = 298 K). The FR are formed due to the addition of the R^· radical, which is an intermediate of R₃Al autooxidation, to C₆₀. Mass spectroscopy and HPLC were used to identify Et_nC₆₀H_m (n, m = 1–6), Et_pC₆₀ (p = 2–6), and dimer EtC₆₀C₆₀Et as stable products of FR transformations. As found by ESR, the EtC₆₀ ^· radical (g = 2.0037) is also generated by photolysis of solutions obtained after interaction in the (C₆₀— R₃Al)—O₂ system. In the presence of dioxygen, the FR is not oxidized but yields complexes with O₂, which appear as broadening of the ESR signals. Chemiluminescence arising in the (C₆₀—R₃Al)—O₂ system is much brighter (I _max = 1.86·10⁸ photon s⁻¹ mL⁻¹) than the known background CL (I _max = 6.0·10⁶ photon s⁻¹ mL⁻¹) for the autooxidation of R₃Al and is localized in a longer-wavelength spectral region (λ_max = 617 and 664 nm). This CL is generated as a result of energy transfer from the primary emitter ³CH₃CHO* to the products of FR transformation: R_nC₆₀H_m, R_pC₆₀, and EtC₆₀C₆₀Et. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 205–213, February, 2007.     

Fe-doped SnO2 transparent semi-conducting thin films deposited by spray pyrolysis technique: Thermoelectric and p-type conductivity properties

In this paper, we report structural, electrical, optical, and especially thermoelectrical characterization of iron (Fe) doped tin oxide films, which have been deposited by spray pyrolysis technique. The doping level has changed from 0 to 10 wt% in solution ([Fe]/[Sn] = 0–40 at% in solution). The thermoelectric response versus temperature difference has exhibited a nonlinear behavior, and the Seebeck coefficient has been calculated from its slope in temperature range of 300–500 K. The Hall effect and thermoelectric measurements have shown p-type conductivity in SnO₂:Fe films with [Fe]/[Sn] ≥ 7.8 at%. In doping levels lower than 7.8 at%, SnO₂:Fe films have been n-type with a negative thermoelectric coefficient. The Seebeck coefficient for SnO₂:Fe films with 7.8 at% doping level has been obtained to be as high as +1850 μV/K. The analysis of as-deposited samples with thicknesses ～350 nm by X-ray diffraction (XRD) and scanning electron microscopy (SEM) has shown polycrystalline structure with clear characteristic peak of SnO₂ cassiterite phase in all films. The optical transparency (T%) of SnO₂:Fe films in visible spectra decreases from 90% to 75% and electrical resistivity (ρ) increases from 1.2 × 10^?2 to 3 × 10³ Ω cm for Fe-doping in the range 0–40 at%.     

Regularities of photostimulated conversions in nanometer aluminum layers

The gravimetric and optical spectroscopic methods reveals that light irradiation with λ = 300–750 nm and intensity I = 6.9 × 10¹⁴–1.1 × 10¹⁶ quanta cm⁻² s⁻¹ for τ = 1–160 min in atmospheric conditions significantly changes the absorption and reflection spectra and mass of aluminum films (d = 2–200 nm). The kinetic curves of the degree of conversion versus aluminum film thickness are satisfactorily described in the inverse logarithmic and parabolic terms. The contact potential difference is measured for Al and Al₂O₃ films along with the photo-EMF of Al-Al₂O₃ systems. The suggested model includes the stages of generation and redistribution of nonequilibrium charge carriers in the contact field of Al-Al₂O₃ systems, oxygen adsorption, Al³⁺ diffusion, and Al₂O₃ formation.     

Isomerism in OBe3F3 + cation: anab initio study

Ab initio MP2/6-31G^*//HF/6-31G^*+ZPE(HF/6-31G^*) calculations of the potential energy surface in the vicinity of stationary points and the pathways of intramolecular rearrangements between low-lying structures of the OBe₃F₃ ⁺ cation detected in the mass spectra of μ₄-Be₄O(CF₃COO)₆ were carried out. Ten stable isomers with di- and tricoordinate oxygen atoms were localized. The relative energies of six structures lie in the range 0–8 kcal mol⁻¹ and those of the remaining four structures lie in the range 20–40 kcal mol⁻¹. Two most favorable isomers, aC _2v isomer with a dicoordinate oxygen atom, planar six-membered cycle, and one terminal fluorine atom and a pyramidalC _3v isomer with a tricoordinate oxygen atom and three bridging fluorine atoms, are almost degenerate in energy. The barriers to rearrangements with the breaking of one fluorine bridge are no higher than 4 kcal mol⁻¹, except for the pyramidalC _3v isomer (∼16 kcal mol⁻¹). On the contrary, rearrangements with the breaking of the O−Be bond occur with overcoming of a high energy barrier (∼24 kcal mol⁻¹). A planarD _3h isomer with a tricoordinate oxygen atom and linear O−Be−H fragments was found to be the most favorable for the OBe₃H₃ ⁺ cation, a hydride analog of the OBe₃F₃ ⁺ ion; the energies of the remaining five isomers are more than 25 kcal mol⁻¹ higher. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 420–430, March, 1999.     

Determination of vitamin B<Subscript>1</Subscript> in seawater and microalgal fermentation media by high-performance liquid chromatography with fluorescence detection

A highly sensitive high-performance liquid chromatographic method with fluorescence detection has been developed for determination of vitamin B₁. Vitamin B₁ was converted into a fluorescent compound by treatment with hydrogen peroxide–horseradish peroxidase and the derivative was subsequently analyzed by HPLC on a Waters Spherisorb ODS2 column (250 mm×4.6 mm ID, 5 μm) with 40:60 methanol–pH 8.5 acetate buffer solution as mobile phase and fluorescence detection at 440 nm (with excitation at 375 nm). The calibration graph was linear from 5.00×10⁻¹⁰ mol L⁻¹ to 5.00×10⁻⁷ mol L⁻¹ for vitamin B₁ with a correlation coefficient of 0.9991 (n=9). The detection limit was 1.0×10⁻¹⁰ mol L⁻¹. The method was successfully used for determination of vitamin B₁ at pg mL⁻¹ levels in microalgal fermentation media and seawater after solid-phase extraction. Recovery was from 89 to 110% and the relative standard deviation was in the range 1.1 to 4.3%.     

Synthesis and spectral properties of titanium(iv) polynuclear hydroxo complexes stabilized in solution by the [PW11O39]7− heteropolyanion

Unsaturated heteropolyanions (HPA) [PW₁₁O₃₉]⁷⁻ stabilize Ti^IV hydroxo complexes in aqueous solutions (Ti: PW₁₁ [PW₁₁O₃₉]⁷⁻⪯12, pH 1–3). Spectral studies (optical,¹⁷O and³¹P NMR, and IR spectra) and studies by the differential dissolution method demonstrated that Ti^IV hydroxo complexes are stabilized through interactions of polynuclear Ti^IV hydroxo cations with heteropolyanions [PW₁₁TiO₄₀ ⁵⁻ formed. Depending on the reaction conditions, hydroxo cations Ti _n−1O _x H _y ^m+ either add to oxygen atoms of the W−O−Ti bridges of the heteropolyanions to form the complex [PW₁₁TiO₄₀·Ti _n−1O _x H _y ] ^k− (at [HPA]=0.01 mol L⁻¹) or interact with Ti^IV of the heteropolyanions through the terminal o atom to give the polynuclear complexes [PW₁₁O₃₉Ti−O−Ti _n−1O _x H _y ]^q− (at [HPA]=0.2 mol L⁻¹). When the complexes of the first type were treated with H₂O₂, Ti^IV ions added peroxo groups. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 914–920, May, 1997.     

Comparison of the performances of Ti/SnO2-Sb, Ti/SnO2-Sb/PbO2, and Nb/BDD anodes on electrochemical degradation of azo dye

In this paper, the preparation conditions of antimony-doped SnO₂ and PbO₂ electrode were optimized for the degradation activity of AO7 dye solution. The results showed that when the doping content of Sb is 8 mol %(SnO₂-Sb(0.08)), the SnO₂ electrode exhibited best activities for the decolorization and mineralization of AO7. The concentration of NaF in electroplating solution had a noticeable effect on PbO₂ electrode for the decolorization of AO7 solution, but little influence on the COD removal rate. The anodic stability tests showed that the electrode prepared in the solution containing 0.10 g l⁻¹ NaF (PbO₂-F(0.10)) was best for environmental application. The comparison of SnO₂-Sb(0.08), PbO₂-F(0.10) and Boron-doped Diamond (BDD) electrodes revealed that a more rapid decolorization rate was obtained on SnO₂-Sb(0.08) and PbO₂-F(0.10) electrodes in dilute AO7 solutions, while higher COD removal rate of concentrated AO7 solutions was on BDD and SnO₂-Sb(0.08) electrodes. The effect of concentration of Na₂SO₄ on the degradation rate of AO7 was very notable on BDD electrode for its highest overpotential of oxygen evolution reaction. In the chloride-containing medium, the decolorization was accelerated greatly but the completed mineralization of AO7 was inhibited with the increasing of chloride ions concentration when these high-overvoltage anodes were used Published in Russian in Elektrokhimiya, 2008, vol. 44, No. 7, pp. 865–875. The text was submitted by the authors in English.     

Hydrogen gas sensitivity of thin films of tin oxide surface doped by platinum laser plasma of different structure and charge composition

The effect of structure and charge composition of Pt laser plasma in the surface doping of SnO₂ thin films on their resistive gas sensitivity towards hydrogen has been studied. The structure and charge composition of plasma varied depending on the value and polarity of the potential (U _D ) of the inhomogeneous electrostatic field generated between a target and plates of a diaphragm located in a vacuum chamber outside the plasma dispersion zone under the action of Kr-F laser radiation on a platinum target. Doping at U _D > 0 results in an increase in gas sensitivity of SnO₂ films several times greater than doping by quasineutral plasma (U _D = 0). The films doped at U _D < 0 with surface concentrations of Pt optimum in terms of the maximum gas sensitivity appear to tolerant towards changes in the composition of the gas phase in a temperature range of 50–600°C.     

Electrochemical behavior and parameters of hydrofullerene C60H36

Electrochemistry of hydrofullerene C₆₀H₃₆ was studied by cyclic voltammetry in THF and CH₂Cl₂ in the −47–14 °C temperature range. Hydrofullerene undergoes reversible one-electron reduction to form a radical anion in THF (E ⁰=−3.18 V (Fc⁰/Fc⁺), Fc=ferrocene) and irreversible one-electron oxidation in CH₂Cl₂ (E _p ^a =1.22 V (Fc⁰/Fc⁺)). The reduction potential was used to estimate electron affinity of hydrofullerene as EA=−0.33 eV. It was suggested that C₆₀H₃₆ is an isomer withT-symmetry in which 12 double bonds form four isolated benzenoid rings located in vertices of an imaginary inscribed tetrahedron on the molecular surface. For hydrofullerene, the “electrochemical gap” is an analog of the energy gap (HOMO−LUMO), equal to (E ^Ox−E ^Red)=4.4 V, and indicates that C₆₀H₃₆ is a sufficiently “hard” molecule with a low reactivity in redox reactions. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2083–2087, November, 1999.     

Nano-composites SnO(VO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>) as anodes for lithium ion batteries

Nano-composites of SnO(V₂O₃) _x (x = 0, 0.25, and 0.5) and SnO(VO)_0.5 are prepared from SnO and V₂O₃/VO by high-energy ball milling (HEB) and are characterized by X-ray diffraction (XRD), scanning electron microscopy, and high-resolution transmission electron microscopy techniques. Interestingly, SnO and SnO(VO)_0.5 are unstable to HEB and disproportionate to Sn and SnO₂, whereas HEB of SnO(V₂O₃) _x gives rise to SnO₂.VO _x . Galvanostatic cycling of the phases is carried out at 60 mA g⁻¹ (0.12 C) in the voltage range 0.005–0.8 V vs. Li. The nano-SnO(V₂O₃)_0.5 showed a first-charge capacity of 435 (±5) mAh g⁻¹ which stabilized to 380 (±5) mAh g⁻¹ with no noticeable fading in the range of 10–60 cycles. Under similar cycling conditions, nano-SnO (x = 0), nano-SnO(V₂O₃)_0.25, and nano-SnO(VO)_0.5 showed initial reversible capacities between 630 and 390 (±5) mAh g⁻¹. Between 10 and 50 cycles, nano-SnO showed a capacity fade as high as 59%, whereas the above two VO _x -containing composites showed capacity fade ranging from 10% to 28%. In all the nano-composites, the average discharge potential is 0.2–0.3 V and average charge potential is 0.5–0.6 V vs. Li, and the coulombic efficiency is 96–98% after 10 cycles. The observed galvanostatic cycling, cyclic voltammetry, and ex situ XRD data are interpreted in terms of the alloying–de-alloying reaction of Sn in the nano-composite “Sn-VO _x -Li₂O” with VO _x acting as an electronically conducting matrix.     

Thermodynamic investigation of room temperature ionic liquid

The molar heat capacities of the room temperature ionic liquid 1-butylpyridinium tetrafluoroborate (BPBF₄) were measured by an adiabatic calorimeter in temperature range from 80 to 390 K. The dependence of the molar heat capacity on temperature is given as a function of the reduced temperature X by polynomial equations, C _p,m [J K⁻¹ mol⁻¹]=181.43+51.297X −4.7816X ²−1.9734X ³+8.1048X ⁴+11.108X ⁵ [X=(T−135)/55] for the solid phase (80–190 K), C _p,m [J K⁻¹ mol⁻¹]= 349.96+25.106X+9.1320X ²+19.368X ³+2.23X ⁴−8.8201X ⁵ [X=(T−225)/27] for the glass state (198–252 K), and C _p,m[J K⁻¹ mol⁻¹]= 402.40+21.982X−3.0304X ²+3.6514X ³+3.4585X ⁴ [X=(T−338)/52] for the liquid phase (286–390 K), respectively. According to the polynomial equations and thermodynamic relationship, the values of thermodynamic function of the BPBF₄ relative to 298.15 K were calculated in temperature range from 80 to 390 K with an interval of 5 K. The glass transition of BPBF₄ was observed at 194.09 K, the enthalpy and entropy of the glass transition were determined to be ΔH _g=2.157 kJ mol⁻¹ and ΔS _g=11.12 J K⁻¹ mol⁻¹, respectively. The result showed that the melting point of the BPBF₄ is 279.79 K, the enthalpy and entropy of phase transition were calculated to be ΔH _m = 8.453 kJ mol⁻¹ and ΔS _m=30.21 J K⁻¹ mol⁻¹. Using oxygen-bomb combustion calorimeter, the molar enthalpy of combustion of BPBF₄ was determined to be Δ_c H _m⁰ = −5451±3 kJ mol⁻¹. The standard molar enthalpy of formation of BPBF₄ was evaluated to be Δ_f H _m⁰ = −1356.3±0.8 kJ mol⁻¹ at T=298.150±0.001 K.     

Electrochemistry and electrocatalytic activity of polypyrrole/ferrocyanide films on a glassy carbon electrode

Functionalized polypyrrole films were prepared by incorporation of Fe(CN)₆ ³⁻ as doping anion during the electropolymerization of pyrrole at a glassy carbon electrode from aqueous solution. The electrochemical behavior of the Fe(CN)₆ ³⁻/Fe(CN)₆ ⁴⁻ redox couple in polypyrrole was studied by cyclic voltammetry. An obvious surface redox reaction was observed and dependence of this reaction on the solution pH was illustrated. The electrocatalytic ability of polypyrrole film with ferrocyanide incorporated was demonstrated by oxidation of ascorbic acid at the optimized pH of 4 in a glycine buffer. The catalytic effect for mediated oxidation of ascorbic acid was 300 mV and the bimolecular rate constant determined for surface coverage of 4.5 × 10⁻⁸ M cm⁻² using rotating disk electrode voltammetry was 86 M⁻¹ s⁻¹. Furthermore, the catalytic oxidation current was linearly dependent on ascorbic acid concentration in the range 5 × 10⁻⁴–1.6 × 10⁻² M with a correlation coefficient of 0.996. The plot of i _p versus v ^1/2 confirms the diffusion nature of the peak current i _p. Received: 12 April 1999 / Accepted: 25 May 1999     

Kinetic studies of the crystallization process of glass-ceramics based on basalt

The crystallization kinetic of the basalt glass ceramic of the oxide composition, (%): SiO₂ − 50.82; Al₂O₃ − 12.05; Fe₂O₃ − 9.28; CaO − 15.48; MgO − 11.08; Na₂O+K₂O − 1.14; TiO₂ − 0.15, with addition of 10% TiO₂ as nucleating agent has been studied using thermal analysis under non-isothermal conditions. In this order, the non-isothermal DTA curves were obtained at different heating rates between 4 and 20°C min⁻¹ in the temperature range of 25–1000°C using a Derivatograph-C (MOM, Hungary). The kinetic parameters of the crystallization process were calculated on the basis of Ozawa-Flynn-Wall, Friedman, Budrugeac-Segal and non-parametric kinetic methods.     

Electrochromism in Materials Prepared by the Sol-Gel Process

Electrochromism is defined as the persistent but reversible optical change (usually transmission) produced electrochemically. The preparation by the sol-gel process of thin films made of amorphous or crystalline nanoparticles of WO₃, V₂O₅, Nb₂O₅, TiO₂, CeO₂, Fe₂O₃ and mixed compounds such as WO₃−TiO₂, CeO₂−TiO₂, CeO₂−SnO₂, have opened remarkable new opportunities for obtaining electrochromic layers exhibiting large optical transmission variation in the UV, visible or infrared range and acceptable kinetics under H⁺ or Li⁺ insertion. In this paper we give an overview of what has been recently achieved in this field, with emphasis for cathodic electrochromic coatings of Nb₂O₅ and TiO₂ composition. Finally we stress the future developments in this fast growing field.     

Study of the optimal condition for electroplating of Bi2S3 thin films and their photoelectrochemical characteristics

Bismuth sulfide (Bi₂S₃) thin films were electrodeposited from non-aqueous dimethyl sulfoxide medium containing Bi(NO₃)₃ and thiourea as the precursor salts, triethanol amine as the complexing agent, and TritonX-100 as the surface active agent. The prepared films were subjected to rigorous experimentation in order to validate their potential candidature for solar cells. The films exhibited band gap energy of ∼1.3 eV and resistivity of the order of 2 × 10⁶ Ω cm at room temperature as was obtained from UV–Vis spectroscopy and four-probe measurements, respectively. Scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and energy dispersive analysis of X-ray were employed to reveal the morphology, structure, and chemical composition of the film matrix. The Bi₂S₃ films were found to be non-decomposable up to the temperature of 1,000 °C with the help of thermogravimetry–differential thermal analysis. The Nyquist and Mott–Schottky plots derived from electrochemical impedance spectroscopy measurements provided important information regarding electrical and semiconducting properties of the films. The n-type film with a donor density of the order of ∼10²³ m⁻³ displayed reasonable photoactivity under illumination and is recommended as a promising candidate for potential photoelectrochemical applications.