Bifunctional transition metal-based molecular catalysts for asymmetric syntheses

The discovery and development of conceptually new chiral bifunctional transition metal-based catalysts for asymmetric reactions is described. The chiral bifunctional Ru catalyst was originally developed for asymmetric transfer hydrogenation of ketones and imines and is now successfully applicable to enantioselective C-C bond formation reaction with a wide scope and high practicability. The deprotonation of 1,3-dicarbonyl compounds with the chiral amido Ru complexes leading to the amine Ru complexes bearing C- or O-bonded enolates, followed by further reactions with electrophlies gives C-C bond formation products. The present bifunctional Ru catalyst offers a great opportunity to open up new fundamentals for stereoselective molecular transformation including enantioselective C-H and C-C as well as C-O, C-N bond formation.     

Catalytic Enantioselective Olefin Metathesis in Natural Product Synthesis. Chiral Metal‐Based Complexes that Deliver High Enantioselectivity and More

Chiral olefin metathesis catalysts enable chemists to access enantiomerically enriched small molecules with high efficiency; synthesis schemes involving such complexes can be substantially more concise than those that would involve enantiomerically pure substrates and achiral Mo alkylidenes or Ru‐based carbenes. The scope of research towards design and development of chiral catalysts is not limited to discovery of complexes that are merely the chiral versions of the related achiral variants. A chiral olefin metathesis catalyst, in addition to furnishing products of high enantiomeric purity, can offer levels of efficiency, product selectivity and/or olefin stereoselectivity that are unavailable through the achiral variants. Such positive attributes of chiral catalysts (whether utilized in racemic or enantiomerically enriched form) should be considered as general, applicable to other classes of transformations.     

Asymmetric intramolecular cyclopropanation of diazo compounds with metallosalen complexes as catalyst: structural tuning of salen ligand

Intramolecular cyclopropanation of alkenyl α-diazoacetates and alkenyl diazomethyl ketones was examined by using optically active (ON⁺)Ru(II)(salen) and Co(II)(salen) complexes as catalysts. For the cyclization of 2-alkenyl α-diazoacetates, Co(II)(salen) complexes 9 and 10 were found to be superior catalysts to the corresponding (ON⁺)Ru(II)(salen) complexes 4 and 5. On the other hand, (ON⁺)Ru(II)(salen) complex 2 was found to be the catalyst of choice for the cyclization of 3-alkenyl diazomethyl ketones, and complex 4 was found to be a good catalyst for the cyclization of (E)-4-alkenyl diazomethyl ketones. The present study demonstrates that metallosalen complexes, especially optically active (ON⁺)Ru(II)(salen) and Co(II)(salen) complexes, can serve as efficient catalysts for the cyclization of alkenyl diazocarbonyl compounds, if a suitable salen ligand is used as the chiral auxiliary.     

Theoretical Investigation of Reverse Water Gas Shift Reaction Catalyzed by Ruthenium Halogen Carbonyl Complexes

In this paper we present theoretical study of the reverse water gas shift (RWGS) reaction catalyzed by ruthenium halogen carbonyl complexes. Three mechanisms, including hydrogen chloride, formic acid and oxidation–reduction mechanism, have been explored by density functional theory. The calculations indicate that the oxidation–reduction mechanism contributes to the TDI and TDTS in the ESM TOF calculations. Bimetallic catalysts would be likely to be more highly active than monometallic catalyst for the RWGS reaction. Among bimetallic catalysts studied, both bimetallic catalysts [Ru(μ-Cl)Cl(CO)₃]₂ and [Ru(μ-CO)Cl(CO)₃]₂ shows higher activity than [Ru(μ-Cl)(CO)₄]₂ catalyst with [Ru(μ-CO)Cl(CO)₃]₂ considering as the most efficient catalyst for RWGS reaction.     

Rethinking Electronic Effects in Photochemical Hydrogen Evolution Using CuInS2@ZnS Quantum Dots Sensitizers

Molecular catalysts based on coordination complexes for the generation of hydrogen via photochemical water splitting exhibit a large versatility and tunability of the catalytic properties through chemical functionalization. In the present work, we report on light-driven hydrogen production in an aqueous solution using a series of cobalt polypyridine complexes as hydrogen evolving catalysts (HECs) in combination with CuInS₂@ZnS quantum dots (QDs) as sensitizers, and ascorbate as the electron donor. A peculiar trend in activity has been observed depending on the substituents present on the polypyridine ligand. This trend markedly differs from that previously recorded using [Ru(bpy)₃]²⁺ (where bpy = 2,2’-bipyridine) as the sensitizer and can be ascribed to different kinetically limiting pathways in the photochemical reaction (viz. protonation kinetics with the ruthenium chromophore, catalyst activation via electron transfer from the QDs in the present system). Hence, this work shows how the electronic effects on light-triggered molecular catalysis are not exclusive features of the catalyst unit but depend on the whole photochemical system.     

STUDY ON POLYMER-Ru-Co BIMETALLIC COMPLEXES CATALYSTS Ⅱ.X-RAY PHOTOELECTRON SPECTROSCOPIC ANALYSIS

Polymer Ru-Co bimetallic complexes have been examined by X-ray photoelectron spectroscopy.The catalyst is highly active only when the mole ratio of Co/Ru is 4: 3. The activity of catalysts does not depend on the total Co/Ru ratio, but on the surface stoichiometry of Co and Ru. When the relative intensities of Co_2_p and Ru_(3d) of XPS peaks are close to each other and both are high,the catalyst exhibits its maximum activity The mechanism ofcatalytic hydroformylation has been discussed.     

New benzo[h]quinoline-based ligands and their pincer Ru and Os complexes for efficient catalytic transfer hydrogenation of carbonyl compounds

New benzo[h]quinoline ligands (HCN'N) containing a CHRNH2 (R=H (a), Me (b), tBu (c)) function in the 2-position were prepared starting from benzo[h]quinoline N-oxide (in the case of ligand a) and 2-chlorobenzo[h]quinoline (for ligands b and c). These compounds were used to prepare ruthenium and osmium complexes, which are excellent catalysts for the transfer hydrogenation (TH) of ketones. The reaction of a with [RuCl2(PPh3)3] in 2-propanol at reflux afforded the terdentate CN'N complex [RuCl(CN'N)(PPh3)2] (1), whereas the complexes [RuCl(CN'N)(dppb)] (2-4; dppb=Ph2P(CH2)4PPh2) were obtained from [RuCl2(PPh3)(dppb)] with a-c, respectively. Employment of (R,S)-Josiphos, (S,R)-Josiphos*, (S,S)-Skewphos, and (S)-MeO-Biphep in combination with [RuCl2(PPh3)3] and ligand a gave the chiral derivatives [RuCl(CN'N)(PP)] (5-8). The osmium complex [OsCl(CN'N)(dppb)] (12) was prepared by treatment of [OsCl2(PPh3)3] with dppb and ligand a. Reaction of the chloride 2 and 12 with NaOiPr in 2-propanol/toluene afforded the hydride complexes [MH(CN'N)(dppb)] (M=Ru 10, Os 14), through elimination of acetone from [M(OiPr)(CN'N)(dppb)] (M=Ru 9, Os 13). The species 9 and 13 easily reacted with 4,4'-difluorobenzophenone, via 10 and 14, respectively, affording the corresponding isolable alkoxides [M(OR)(CN'N)(dppb)] (M=Ru 11, Os 15). The complexes [MX(CN'N)(P2)] (1-15) (M=Ru, Os; X=Cl, H, OR; P=PPh3 and P2=diphosphane) are efficient catalysts for the TH of carbonyl compounds with 2-propanol in the presence of NaOiPr (2 mol %). Turnover frequency (TOF) values up to 1.8x10(6) h(-1) have been achieved using 0.02-0.001 mol % of catalyst. Much the same activity has been observed for the Ru--Cl, --H, --OR, and the Os--Cl derivatives, whereas the Os--H and Os--OR derivatives display significantly lower activity on account of their high oxygen sensitivity. The chiral Ru complexes 5-8 catalyze the asymmetric TH of methyl-aryl ketones with TOF approximately 10(5) h(-1) at 60 degrees C, up to 97 % enatiomeric excess (ee) and remarkably high productivity (0.005 mol % catalyst loading). High catalytic activity (TOF up to 2.2x10(5) h(-1)) and enantioselectivity (up to 98 % ee) have also been achieved with the in-situ-generated catalysts prepared from [MCl2(PPh3)3], (S,R)-Josiphos or (S,R)-Josiphos*, and the benzo[h]quinoline ligands a-c.     

Air-stable catalysts for highly efficient and enantioselective hydrogenation of aromatic ketones

A series of chiral trans-[RuCl(2)(dipyridylphosphine)(1,2-diamine)] complexes have been synthesized and characterized by NMR and single-crystal X-ray diffraction studies. These Ru complexes combined with (CH(3))(3)COK in 2-propanol formed a very effective catalyst system for the hydrogenation of a diverse range of simple aromatic ketones with high activity (substrate-to-catalyst ratio up to 100 000) and excellent enantioselectivity (up to >99.9%). The catalyst system was also found to be stable in solution even under a normal atmosphere.     

New polydentate ligand and catalytic properties of the corresponding ruthenium complex during sulfoxidation and alkene epoxidation

Bis(diimine)-ruthenium complexes constitute a class of catalysts with good activity for oxidation reactions, such as sulfoxidation and epoxidation. The synthesis and the full characterization of a new ruthenium complex bearing an original pentadentate ligand (L5pyr for 2,6-bis-(6-ethyl-2,2'-bipyridyl)-pyridine) is reported. Comparison of its activity with regard to[Ru(bpy)2(CH3CN)2](2+) and [Ru(bpy)2(py)(CH3CN)](2+) during alkene and sulfide oxidation allowed us to conclude that the addition of a fifth pyridine ligand in the coordination sphere improves the efficiency of the catalyst. Moreover, under these oxidation conditions a hydroxylation of the ligand L5pyr led to a better activity than its analogue [Ru(bpy)2(py)(CH3CN)](2+), especially during epoxidation of alkenes by PhI(OAc)2.     

Nitro-substituted Hoveyda-Grubbs ruthenium carbenes: enhancement of catalyst activity through electronic activation

The design, synthesis, stability, and catalytic activity of nitro-substituted Hoveyda-Grubbs metathesis catalysts are described. The highly active and stable meta- and para-substituted complexes are attractive from a practical point of view. These catalysts operate in very mild conditions and can be successfully applied in various types of metathesis [ring-closing metathesis, cross-metathesis (CM), and enyne metathesis]. Although the presence of a NO(2) group leads to catalysts that are dramatically more active than both the second-generation Grubbs's catalyst and the phosphine-free Hoveyda's carbene, enhancement of reactivity is somewhat lower than that observed for a sterically activated Hoveyda-Grubbs catalyst. Attempts to combine two modes of activation, steric and electronic, result in severely decreasing a catalyst's stability. The present findings illustrate that different Ru catalysts turned out to be optimal for different applications. Whereas phosphine-free carbenes are catalysts of choice for CM of various electron-deficient substrates, they exhibit lower reactivity in the formation of tetrasubstituted double bonds. This demonstrates that no single catalyst outperforms all others in all possible applications.     

Chiral Ru(II) Schiff base complex-catalysed enantioselective epoxidation of styrene derivatives using iodosyl benzene as oxidant. II

Six-coordinated chiral Ru(II) Schiff base complexes of the type [RuLX(Y)₂] where L=terdentate chiral Schiff bases derived from -tyrosine, -phenylalanine with salicylaldehyde, 3-tertiary-butyl-, 3,5-di-tertiary-butyl-, 3,5-dichloro- and 3,5-dinitrosalicylaldehyde, X=PPh₃ and Y=H₂O have been investigated as catalysts for enantioselective epoxidation of styrene, 4-chloro-, 4-nitro- and 4-methylstyrene in fluorobenzene in order to explore the efficiency of catalytic system by varying the substituents on the ligand moiety of the catalysts as well as on the substrates using iodosyl benzene as terminal oxidant. Much better results were obtained with catalyst 5 and 10 with 4-nitrostyrene. The enantiomeric excess of the resulting epoxide was evaluated by chiral capillary column.     

Catalytic properties of Ru nanoparticles embedded on ordered mesoporous carbon with different pore size in Fischer-Tropsch synthesis

A series of 3 wt% Ru embedded on ordered mesoporous carbon (OMC) catalysts with different pore sizes were prepared by autoreduction between ruthenium precursors and carbon sources at 1123 K. Ru nanoparticles were embedded on the carbon walls of OMC. Characterization technologies including power X-ray diffraction (XRD), nitrogen adsorption-desorption, transmission electron microscopy (TEM), and hydrogen temperature-programmed reduction (H₂-TPR) were used to scrutinize the catalysts. The catalyst activity for Fischer-Tropsch synthesis (FTS) was measured in a fixed bed reactor. It was revealed that 3 wt% Ru-OMC catalysts exhibited highly ordered mesoporous structure and large surface area. Compared with the catalysts with smaller pores, the catalysts with larger pores were inclined to form larger Ru particles. These 3 wt% Ru-OMC catalysts with different pore sizes were more stable than 3 wt% Ru/AC catalyst during the FTS reactions because Ru particles were embedded on the carbon walls, suppressing particles aggregation, movement and oxidation. The catalytic activity and C₅₊ selectivity were found to increase with the increasing pore size, however, CH₄ selectivity showed the opposite trend. These changes may be explained in terms of the special environment of the active Ru sites and the diffusion of products in the pores of the catalysts, suggesting that the activity and hydrocarbon selectivity are more dependent on the pore size of OMC than on the Ru particle size.     

Nanostructured PtRu/C as anode catalysts prepared in a pseudomicroemulsion with ionic surfactant for direct methanol fuel cell

Nanostructured PtRu/C catalysts have been prepared from a water-in-oil pseudomicroemulsion with the aqueous phase of a mixed concentrated solution of H(2)PtCl(6), RuCl(3), and carbon powder, oil phase of cyclohexane, ionic surfactant of sodium dodecylbenzene sulfonate (C(18)H(29)NaO(3)S), and cosurfactant n-butanol (C(4)H(10)O). Two different composing PtRu/C nanocatalysts (catalyst 1, Pt 20 wt %, Ru 15 wt %; catalyst 2, Pt 20 wt %, Ru 10 wt %) were synthesized. The catalysts were characterized by transmission electron microscopy, X-ray diffractometry, X-ray photoelectron spectroscopy, and thermogravimetric analysis, and the particles were found to be nanosized (2-4 nm) and inherit the Pt face-centered cubic structure with Pt and Ru mainly in the zero valance oxidation state. The ruthenium oxide and hydrous ruthenium oxide (RuO(x)()H(y)()) were also found in these catalysts. The cyclic voltammograms (CVs) and chronoamperometries for methanol oxidation on these catalysts showed that catalyst 1 with a higher Ru content (15 wt %) has a higher and more durable electrocatalytic activity to methanol oxidation than catalyst 2 with low Ru content (10 wt %). The CV results for catalysts 1 and 2 strongly support the bifunctional mechanism of PtRu/C catalysts for methanol oxidation. The data from direct methanol single cells using these two PtRu/C as anode catalysts show the cell with catalyst 1 has higher open circuit voltage (OCV = 0.75 V) and maximal power density (78 mW/cm(2)) than that with catalyst 2 (OCV = 0.70 V, P(max) = 56 mW/cm(2)) at 80 degrees C.     

Development of Chiral Organosuperbase Catalysts Consisting of Two Different Organobase Functionalities

In the field of chiral Brønsted base catalysis, a new generation of chiral catalysts has been highly anticipated to overcome the intrinsic limitation of pronucleophiles that are applicable to the enantioselective reactions. Herein, we reveal conceptually new chiral Brønsted base catalysts consisting of two different organobase functionalities, one of which functions as an organosuperbase and the other as the substrate recognition site. Their prominent activity, which stems from the distinctive cooperative function by the two organobases in a single catalyst molecule, was demonstrated in the unprecedented enantioselective direct Mannich‐type reaction of α‐phenylthioacetate as a less acidic pronucleophile. The present achievement would provide a new guiding principle for the design and development of chiral Brønsted base catalysts and significantly broaden the utility of Brønsted base catalysis in asymmetric organic synthesis.     

Combinatorial discovery of new methanol-tolerant non-noble metal cathode electrocatalysts for direct methanol fuel cells

Combinatorial synthesis and screening were used to identify methanol-tolerant non-platinum cathode electrocatalysts for use in direct methanol fuel cells (DMFCs). Oxygen reduction consumes protons at the surface of DMFC cathode catalysts. In combinatorial screening, this pH change allows one to differentiate active catalysts using fluorescent acid-base indicators. Combinatorial libraries of carbon-supported catalyst compositions containing Ru, Mo, W, Sn, and Se were screened. Ternary and quaternary compositions containing Ru, Sn, Mo, Se were more active than the "standard" Alonso-Vante catalyst, Ru(3)Mo(0.08)Se(2), when tested in liquid-feed DMFCs. Physical characterization of the most active catalysts by powder X-ray diffraction, gas adsorption, and X-ray photoelectron spectroscopy revealed that the predominant crystalline phase was hexagonal close-packed (hcp) ruthenium, and showed a surface mostly covered with oxide. The best new catalyst, Ru(7.0)Sn(1.0)Se(1.0), was significantly more active than Ru(3)Se(2)Mo(0.08), even though the latter contained smaller particles.     

Enantioselective photooxidation of a sulfide by a chiral ruthenium(II) complex immobilized on a montmorillonite clay surface: the role of weak interactions in asymmetric induction

The present work pursued a possibility that enantioselectivity was achieved through weak intermolecular interactions between a catalyst and a substrate. For that purpose, we studied the photooxidation of alpha-ethylbenzyl phenyl sulfide catalyzed by a polypyridyl ruthenium(II) complex as a chiral photosensitizer. No covalent bonding was formed between a catalyst and a substrate, because the complexes used ([Ru(phen)(3)](2+) or [Ru(bpy(3))(2+)]) were coordinatively saturated. Enantiomer excess (ee) was attained to be 30% when a chiral photosensitizer was immobilized on montmorillonite clay. It was even improved to 43% in the presence of an additional chiral auxiliary, dibenzoyl-D(+)-tartaric acid. Notably, no enantioselectivity was achieved when the reaction took place in homogeneous solutions. The ab initio calculations were performed on the stability of an associate composed of a catalyst (metal complex) and a product (sulfoxide) to obtain a clue to reaction mechanisms. The calculations suggest that chiral discrimination is achieved even through noncovalent interactions between a substrate and a chiral sensitizer when the attacking direction by a substrate toward a catalyst is limited sterically on a solid surface.     

In-situ X-ray absorption spectroscopy study of Pt and Ru chemistry during methanol electrooxidation

Methanol electrooxidation in a 0.5 M sulfuric acid electrolyte containing 1.0 M CH3OH was studied on 30% Pt/carbon and 30% PtRu/carbon (Pt/Ru = 1:1) catalysts using X-ray absorption spectroscopy (XAS). Absorption by Pt and Ru was measured at constant photon energy in the near edge region during linear potential sweeps of 10-50 mV/s between 0.01 and 1.36 V vs rhe. The absorption results were used to follow Pt and Ru oxidation and reduction under transient conditions as well as to monitor Ru dissolution. Both catalysts exhibited higher activity for methanol oxidation at high potential following multiple potential cycles. Correlation of XAS data with the potential sweeps indicates that Pt catalysts lose activity at high potentials due to Pt oxidation. The addition of Ru to Pt accelerates the rate of methanol oxidation at all potentials. Ru is more readily oxidized than Pt, but unlike Pt, its oxidation does not result in a decrease in catalytic activity. PtRu/carbon catalysts underwent significant changes during potential cycling due to Ru loss. Similar current density vs potential results were obtained using the same PtRu/carbon catalyst at the same loading in a membrane electrode assembly half cell with only a Nafion (DuPont) solid electrolyte. The results are interpreted in terms of a bifunctional catalyst mechanism in which Pt surface sites serve to chemisorb and dissociate methanol to protons and carbon monoxide, while Ru surface sites activate water and accelerate the oxidation of the chemisorbed CO intermediate. PtRu/carbon catalysts maintain their activity at very high potentials, which is attributed to the ability of the added Ru to keep Pt present in a reduced state, a necessary requirement for methanol chemisorption and dissociation.     

Mechanism of ruthenium-catalyzed olefin metathesis reactions from a theoretical perspective

This paper presents a density functional theory study of the ruthenium-catalyzed olefin metathesis reactions. The ligand binding energy has been calculated in the first generation of Grubbs-type (PCy3)2Cl2Ru=CHPh (pre)catalyst, as well as in the heteroleptic (pre)catalytic systems in which a N-heterocyclic carbene, NHC, ligand substitutes a single phosphine. In agreement with experiments PCy3 coordinates more strongly to Ru in the heteroleptic (pre)catalysts than in the Grubbs-type (pre)catalyst. Moreover, ethene coordination and insertion into the Ru-alkylidene bond in the above-mentioned systems, as well as in the Hofmann type catalytic system with a cis-coordinated phosphane ligand, has been studied. The calculated insertion barrier for the NHC systems are lower than that of the (PCy3)2Cl2Ru=CHPh system. This is consistent with the higher activity experimentally observed for the NHC-based system.     

Can [M(H)2(H2)(PXP)] Pincer Complexes (M=Fe,Ru, Os; X=N,O, S) Serve as Catalyst Lead Structures for NH3 Synthesis from N2 and H2?

The potential of pincer complexes [M(H)(2)(H(2))(PXP)] (M=Fe, Ru, Os; X=N, O, S) to coordinate, activate, and thus catalyze the reaction of N(2) with classical or nonclassical hydrogen centers present at the metal center, with the aim of forming NH(3) with H(2) as the only other reagent, was explored by means of DF (density functional) calculations. Screening of various complexes for their ability to perform initial hydrogen transfer to coordinated N(2) showed ruthenium pincer complexes to be more promising than the corresponding iron and osmium analogues. The ligand backbone influences the reaction dramatically: the presence of pyridine and thioether groups as backbones in the ligand result in inactive catalysts, whereas ether groups such as gamma-pyran and furan enable the reaction and result in unprecedented low activation barriers (23.7 and 22.1 kcal mol(-1), respectively), low enough to be interesting for practical application. Catalytic cycles were calculated for [Ru(H)(2)(H(2))(POP)] catalysts (POP=2,5-bis(dimethylphosphanylmethyl)furan and 2,6-bis(dimethylphosphanylmethyl)-gamma-pyran). The height of activation barriers for the furan system is somewhat more advantageous. Formation of inactive metal nitrides has not been observed. SCRF calculations were used to introduce solvent (toluene) effects. The Gibbs free energies of activation of the numerous single reaction steps do not change significantly when solvent is included. The reaction steps associated with the formation of the active catalyst from precursors [M(H)(2)(H(2))(PXP)] were also calculated. The otherwise inactive pyridine ligand system allows for the generation of the active catalyst species, whereas the ether ligand systems show activation barriers that could prohibit practical application. Consequently the generation of the active catalyst species needs to be addressed in further studies.     

CO在担载Ru催化剂上的吸脱附作用及其表面加氢反应

研究了担载于Al_2O_3和ZrO_2上的以Ru_3(CO)_(12)为前体的[Ru]和以RuCl_3为前体的Ru催化剂的TPR特性、CO吸脱附行为及其表面加H_2反应。担载于Al_2O_3上的[Ru]和Ru催化剂上部分物相较担载于ZrO_2上者难于还原。CO在氧化[Ru]催化剂上主要以Ru(CO)yO_2表面络合物形式存在,在还原[Ru]和Ru、以及氧化Ru催化剂上CO以吸附物种形式存在。在Ru离子上的CO比在Ru原子上者难于脱附。以ZrO_2为载体的[Ru]和Ru催化剂上的CO加H_2生成CH_4的性能显著优于以Al_2O_3为载体者,担载[Ru]催化剂上的CO加H_2性能略优于担载Ru催化剂。