Conformational analysis of mesocyclic polythioethers : Crystal and molecular structures of 1,4-dithiacycloheptane, 1,5-dithiacyclononane and 1,6-dithiacyclodecane

The crystal and molecular structures of 1,4-dithiacycloheptane (1,4-DTCH), 1,5-dithiacyclononane (1,5-DTCN), and 1,6-dithiacyclodecane (1,6-DTCD) have been determined by single crystal X-ray studies. These compounds crystallize in the space groups P2₁2₁2₁ (No. 19), P2₁/c (No. 14), and P2₁/n, respectively with a = 5.409(1), b = 10.883(2), c = 11.390(2) Å, Z = 4; a = 9.600(4), b = 12.378(8), c = 7.904(3) Å, /gb = 113.31(3)°, Z = 4; and a = 5.290(1), b = 12.853(3), c = 6.850(2) Å, β = 93.39(2)°, Z = 2, respectively. The nonhydrogen atoms were located using direct methods and the hydrogen atoms were found by Fourier difference maps. Full-matrix least-squares refinement led to conventional R factors of 0.0459, 0.0558 and 0.0314, respectively. The conformations adopted by 1,4-DTCH, 1,5-DTCN and 1,6-DTCD, in the crystalline slate, are twist chair (C₂ symmetry), twist boat chair (C₂ symmetry), and boat chair boat (C_2k symmetry), respectively. The transannular S-S distances are 3.583, 4.108 and 4.864 Å, respectively.     

Synthesis of mesocyclic and macrocyclic polythioethers using the cesium dithiolate technique

The mesocyclic trithioethers, 1,4,7-trithiacyclodecane, 1,4,7-trithiacycloundecane, 1,4,8-trithiacycloundecane, and 1,5,9-trithiacyclododecane; the mesocyclic trithioether ketones, 1,4,7-trithiacyclodecan-9-one; 1,4,8-trithiacycloundecan-6-one, and 1,5,9-trithiacyclododecan-3-one; and the mesocyclic trithioether alcohols, 1,4,7-trithiacyclodecan-9-ol, 1,4,8-trithiacycloundecan-6-ol, and 1,5,9-trithiacyclododecan-3-ol, have been synthesized using the cesium dithiolate technique. In some cases, the corresponding macrocyclic hexathioether was isolated from the reaction mixture in addition to the mesocyclic trithioether; 1,4,7,11,14,17-hexathiacycloeicosane, 1,4,7,11,14,17-hexathiacycloeicosan-9,19-dione, 1,4,7,12,15,18-hexathiacyclodocosane, and 1,5,9,13,17,21-hexathiacyclotetracosane. Single-crystal X-ray structures have been determined for 1,5,9-trithiacyclododecan-3-ol and 1,4,7,12,15,18-hexathiacyclodocosane. For 1,5,9-trithiacyclododecane-3-ol, the compound crystallizes in the monoclinic space group, C2/c, with a = 10.5926( 9 ) Å, b = 15.582(2) Å, c = 13.6015(8) Å, β = 98.186(6)⁰, Z = 8, and R = 0.038. The macrocycle, 1,4,7,12,15,18-hexathiacyclodocosane, crystallizes in the orthorhombic space group, Pbca, with a = 21.406(5) Å, b = 9.810(2) Å, c = 10.225(2) Å, Z = 4, and R = 0.020.     

Conformational analysis of 1,4,7-trithiacyclodecane and related compounds: Synthesis and complexation studies of mesocyclic and macrocyclic polythioethers VI

Molecular mechanics (MM2) calculations have been carried out on the ten-membered ring trithioethers, 1,4,7-trithiacyclodecane (10S3) and 1,4,7-trithiacyclodecan-9-one (keto-10S3). The lowest energy conformations according to these calculations are a [1333] and a [2233] conformation, respectively. The crystal and molecular structure of the ketone, 1,4,7-trithiacyclodecan-9-one, has been determined by a single-crystal X-ray study. The compound crystallizes in the monoclinic space group P2₁, with two molecules per unit cell of dimensions a = 7.176(1) Å, b = 5.3447(6) Å, c = 12.0914(6) Å, and β = 96.486(7)⁰, and R = 0.048. The conformation adopted by the compound in the crystalline state is a [2323] or boat-chair-boat conformation with two sulfur atoms endodentate and one sulfur atom exodentate.     

Structure–property relationships of novel fluorinated polycarbonate polyurethane films with high transparency and thermal stability

Research on Chemical Intermediates - Novel polycarbonate diol (PCDL) was synthesized using dimethyl carbonate, 1,5-pentanediol (1,5-PD), 1,6-hexanediol (1,6-HD) and 1,4-cyclohexanedimethanol...     

Theoretical calculation of the vibrational spectra of cis-cis-cyclooctadienes in the vapour phase

The theoretical infrared spectra of 1,3-cis-cis-cyclooctadiene (1,3-COD) and 1,5-cis-cis-cyclooctadiene (1,5-COD), were obtained by ab initio MO calculations at Hartree-Fock level. The results were compared with the available IR experimental spectra of 1,3- and 1,5-COD. The apparent agreement between theoretical and experimental data allows us to exploit two bands, found only in the case of the theoretical spectrum of 1,4-COD, as a tool for identifying 1,4-COD during its synthesis.     

Search for IR spectral features of less-abundant diisopropylnaphthalenes based on comparison of theoretical and experimental spectra

Experimental and theoretical B3PW91/6-31G* spectra of diisopropylnaphthalene (DIPN) were compared. For the 1,3- and 2,6-DIPN isomers, which were isolated as pure compounds, the theoretical IR spectra were scaled down and were shown to fit the experimental spectra very well. The same scaling factor was used for comparison theoretical and experimental spectra of isomers present in unresolved mixtures of isomers, i.e. 1,4-, 1,5-, 1,6-, 1,7-, and 2,7-DIPNs. For three isomers, 1,2-, 1,8-, and 2,3-DIPN, the experimental IR spectra, unknown so far, were predicted.     

Synthesis and structural studies of hydrophilic mesocyclic trithioethers

The functionalized mesocyclic trithioethers, 1,4,7-trithiacyclodecane-9,9-dimethanol (10S3-diMeOH), 9 -methyl-1, 4, 7 - trithiacyclodecane - 9 -carboxylic acid (Me-10S3-acid), 1,4,7-trithiacycloundecane-9,10-diol (dihydroxy-11S3), 1,5,9-trithiacyclododecane-3,3-dimethanol (12S3-diMeOH), 3-methyl-1,5,9-trithiacyclododecane-3-carboxylic acid (Me-12S3-acid), and 1 , 5 , 9 - trit hiacyclo tride cane -11 , 12 - diol ( dihydroxy - 13S3), have been synthesized using the cesium dithiolate technique. The single-crystal X-ray structure has been determined for 3-methyl-1,5,9-trithiacyclododecane-3-carboxylic acid. The compound crystallizes in the monoclinic space group P2₁/n, with a = 9.513(2) Å, b = 5.706(1) Å, c = 25.70(1) Å, β = 96.50(1)°, Z = 4, and R = 0.075. © 1998 John Wiley & Sons, Inc. Heteroatom Chem 9:123–128, 1998     

Molecular conformation of cyclenes: V. Cyclodecadienes

The strain energy of 1,3-, 1,4-, 1,5- and 1,6-cyclodecadienes has been calculated as a function of various geometric parameters. The relative stability of the minimum-energy forms is discussed and, where possible, compared with thermodynamic and electron diffraction data. In the 1,5- and 1,6-isomers agreement with experimental data is obtained if the transannular interaction between the double bonds is taken into account.     

Vibrational spectra and molecular conformations of 1,5-dichloro- and 1,5-dibromopentanes and 1,6-dichloro-and 1,6-dibromohexanes

The Raman and IR spectra of 1,5-dichloro- and 1,5-dibromopentanes and 1,6-dichloro-and 1,6-dibromohexanes have been measured. The normal coordinates have been calculated for these molecules using a consistent set of force constants and the molecular conformations studied by analysing the spectra with reference to the results of the calculations. In the crystalline solid state, 1,5-dichloropentane assumes the trans-trans-trans-gauche form and 1,5-dibromopentane, 1,6-dichloro- and 1,6-dibromohexanes assume the all-trans form. The normal coordinate treatment with the well-established force field was of great help in determining the whole molecular form of the relatively large chain molecules.     

Vibrational analysis of 1,4-diaminoanthraquinone and 1,5-dichloroanthraquinone. A joint FTIR, FT-Raman and scaled quantum mechanical study

This work deals with the vibrational spectroscopy of 1,4-diaminoanthraquinone (1,4-DAAQ) and 1,5-dichloroanthraquinone (1,5-DCAQ). The mid and far FTIR and FT-Raman spectra were measured in the condensed state. The fundamental vibrational frequencies and intensity of the vibrational bands were evaluated using density functional theory (DFT) with the B3LYP functional and 6-31G* basis set. The vibrational spectra were interpreted with the aid of normal coordinate analysis based on a scaled quantum mechanical force field. The infrared and Raman spectra were also predicted from the calculated intensities. Unambiguous vibrational assignment of all the fundamentals were made using the potential energy distribution (PED).     

Density functional analysis of ancillary ligand electronic contributions to metal-mediated enediyne cyclization

Density functional theory (DFT) has been used to study electronic perturbations induced by ancillary halogen ligation within metalloenediyne constructs, and the subsequent affect upon thermal Bergman cyclization temperatures. To isolate electronic from geometric components of Bergman cyclization thermodynamics, model diamine- and diphosphine-enediynes (L = 1,6-diamino- or 1,6-diphosphino-cis-1,5-hexadiyne-3-ene) of Mn(II), Cu(II), Zn(II), and Pd(II) with ancillary chloride ligands have been examined computationally and compared to more complex ethylenediamine-based metalloenediyne frameworks of the form MLX(2) (X = Cl, Br, I; L = 1,4-dibenzyl-1,4-diaza-cyclododec-8-ene-6,10-diyne) with distorted square-planar (Cu(II)), T(d) (Zn(II)), and D(4h) (Pd(II)) geometries. In the latter systems, the ethylenediamine linkage restricts the conformation of the enediyne backbone, causing the alkyne termini separation to be nearly independent of metal geometry (3.75-3.82 A). Within the Zn(II) family, steric effects are shown to induce conformational changes on the cyclization potential energy surface (PES) prior to the Bergman transition state, introducing distinct electron-electron repulsive interactions. Multiple metal and ligand conformations are also observed on the Cu(II) metalloenediyne cyclization PES. In contrast, square-planar Pd(II) compounds exhibit overlap between the out-of-plane halogen lone pairs and metal d orbitals, as well as the enediyne pi system, reminiscent of an organometallic "push-pull" reaction mechanism. These systems have significantly higher predicted activation barriers toward cycloaromatization due to enhanced electron repulsion.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Synthesis and phase behavior of polyurethanes end-capped with fluorinated phosphatidylcholine head groups

A series of fluorinated phosphatidylcholine polyurethane macromolecular additives were synthesized by solution polymerization using methylenebis(phylene isocyanates)(MDI) and 1,4-butanediol(BDO) as hard segments,a new phoshporycholine,2-(2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9-hexadecafluoro-10-(2-hydroxyethoxy)decyloxy) ethyl phosphorycholine (HDFOPC) as end-capper,and four polydiols,poly(tetramethylene glycol)s(PTMG),polydimethylsiloxane(PDMS), poly(1,6-hexyl-1,5-pentylcarbonate)(PHPC) and poly(propylene glycol)(PPG) as soft segments,respectively.The chemical structures of the synthesized polyurethanes were characterized by ~1H-NMR and FTIR.DSC and DMA were employed to study the phase behavior of these novel polyurethanes due to their great influences on the surface properties,and hence their interactions with bio-systems.The results showed that phase separation of the fluorinated phosphatidylcholine end-capped polyurethanes was increased in comparison with that of normal polyurethanes.The effect of fluorinated phosphatidylcholine end-capped groups on the phase behavior was further demonstrated by analyzing the degree of hydrogen-bonding between hard and soft segments.     

Structural and dynamic aspects of hydrogen-bonded complexes and inclusion compounds containing alpha,omega-dicyanoalkanes and urea, investigated by solid-state 13C and 2H NMR techniques

Solid-state 13C NMR and 2H NMR techniques have been used to investigate structural and dynamic properties of the 1,4-dicyanobutane/urea and 1,5-dicyanopentane/urea 1:1 hydrogen-bonded complexes and the 1,6-dicyanohexane/urea inclusion compound. The pure crystalline phase of urea has also been investigated. The 13C NMR studies have focused on 13C chemical shift anisotropy and second-order quadrupolar effects (arising from 13C-14N interaction) for the urea molecules and the cyano groups of the alpha,omega-dicyanoalkanes. Parameters describing these interactions are derived and are discussed in relation to the known structural properties of these materials. Comparison of 13C chemical shift anisotropies of the cyano carbons and rates of 13C dipolar dephasing suggest that 1,4-dicyanobutane and 1,5-dicyanopentane are effectively static, whereas 1,6-dicyanohexane has greater mobility. 2H NMR line shape analysis for the 1,4-dicyanobutane/urea-d4 and 1,5-dicyanopentane/urea-d4 complexes indicates that the only motion of the urea molecules that is effective on the 2H NMR time scale is a rapid libration about the C=O bond over an angular range of about 26 degrees . For the 1,6-dicyanohexane/urea-d4 inclusion compound, the 2H NMR line shape is consistent with a motion comprising 180 degrees jumps about the C=O bond at rates that are intermediate on the 2H NMR time scale. In addition, rapid libration about the C=O bond also occurs over an angular range of about 20 degrees . The dynamic properties of the urea molecules in these materials are compared with those of urea molecules in other crystalline environments.     

(1)H NMR and viscometric studies on cationic gemini surfactants in presence of aromatic acids and salts

In this paper, we are reporting the influence of addition of aromatic acids (anthranilic and benzoic acid) and their sodium salts on the micellar morphological changes in three cationic gemini surfactant solutions, viz. 5 mM tetramethylene-1,4-bis(N-hexadecyl-N,N-dimethylammonium bromide), 10 mM pentamethylene-1,5-bis(N-hexadecyl-N,N-dimethylammonium bromide), and 10 mM hexamethylene-1,6-bis(N,-hexadecyl-N,N-dimethylammonium bromide). The solubilization site of the counterions (obtained from the additives) near the micellar surface are inferred by 1H NMR. The behavior is explained in the light of binding of counterions to the micelle as well as the nature of the functional group attached to the additive.     

Polyesters containing sulfur. VI. Synthesis and characterization of polyesters from naphthalene-1,4- or naphthalene-1,5-bis(methylthioacetic acid) and aliphatic diols

Two series of new linear polyesters containing sulfur in the main chain were obtained by melt polycondensation of naphthalene-1,4-bis(methylthioacetic acid) (N-1,4-BMTAA) or naphthalene-1,5-bis(methylthioacetic acid) (N-1,5-BMTAA) with some aliphatic diols using a 0.05 molar excess of diol. Softening temperatures ranging from 55 to 130°C, reduced viscosities in the range of 0.15–0.39 dL/g, and low-molecular weights were their characteristic. The structure and thermal properties of all polyesters were examined by using elemental analysis, FT-IR and ¹H-NMR spectroscopy, X-ray diffraction analysis, differential thermal analysis (DTA), thermogravimetric analysis (TGA), and differential scanning calorymetry (DSC). The kinetics of polyester formation by uncatalyzed melt polycondensation was studied in a model system: N-1,4-BMTAA or N-1,5-BMTAA and 2,2′-oxydiethanol (ODE) at 150, 160, and 170°C. Reaction rate constants (k₃) and activation parameters (ΔG^‡, ΔH^‡, ΔS^‡) from carboxyl group loss were determined using classical kinetic methods. Hydroxyl-terminated polyesters derived from 1,4-butanediol, 1,5-pentanediol, and 1,6-hexanediol were used for preparation of the polyurethanes by melt polyaddition with hexamethylene diisocyanate (HDI). They were characterized by reduced viscosity, FT-IR spectroscopy, X-ray diffraction analysis, TGA, DSC, polarizing microscope observation, and hardness and tensile properties. The resulting polyurethanes behave like high-elasticity thermoplastic elastomers, except the one derived from N-1,5-BMTAA and 1,6-hexanediol-based polyester. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2359–2369, 1998     

Correlation between C and O chemical shifts and torsional strain in spiroacetals

The relationship between the ¹³C and ¹⁷O NMR chemical shifts and the dihedral energies (non-bonding interactions) of 1,4-dioxaspiro[4.4]nonane, 1,4-dioxa- and 6,10-dioxaspiro[4.5]decane, 1,4-dioxa- and 6,11-dioxaspiro[4.6]undecane, 1,5-dioxaspiro[5.5]undecane, 1,5-dioxa and 7,12-dioxaspiro[5.6]dodecane and 1,6-dioxaspiro[6.6]tridecane were analyzed. These data showed correlation of the non-bonding interactions with the chemical shift of the spiranic carbon, as well as a linear relationship between ¹³C and ¹⁷O.     

Oxydations par le carbonate d'argent sur celite—XIII : Preparation de lactones

Silver carbonate on Celite oxidizes primary 1,4-, 1,5-, and 1,6-diols and primary-tertiary diols into lactones in high yield. Primary—secondary diols lead to mixtures of hydroxy-ketones and lactones. Details are given on the synthesis of (±) mevalonolactone.     

The generation and sigmatropic rearrangement of a derivative of vinyl-TMM (2,5-dimethyl-3-isopropyl-4-isopropylidenehex-2-en-1,5-diyl)

The thermal rearrangement of 2,5-dimethyl-3-isopropyl-4-isopropylidenehex-2-en-1,5-diyl to 4-isopropyl-3-isopropylidene-2,5-dimethylhexa-1,4-diene involves a 1,6-sigmatroplo shift of hydrogen which may occur in an antarafacial manner.     

Heterocyclic derivatives of 2-amino-4-nitrophenol

Summary A new pathway for the synthesis of cyclic derivatives of 2-amino-4-nitrophenol by application of dibromoalkanes is described. This general method was used for the preparation of several heterocycles (partially saturated 1,4-benzoxazines, 1,5-benzoxazepines, 1,6-benzoxazocines). Two rotamers are present in solution of theN-formyl derivatives, the relative amounts depending on the solvent used.

---

Heterozyklische Derivate von 2-Amino-4-nitrophenol

Zusammenfassung Eine neue Methode zur Herstellung heterozyklischer Derivate von 2-Amino-4-nitrophenol wird vorgestellt. Dieses allgemeine Verfahren kann zur Synthese von verschiedenen Ringsystemen (partielle gesättigte 1,4-Benzoxazine, 1,5-Benzoxazepine, 1,6-Benzoxazocine) benutzt werden. In den Lösungen derN-Formyl-Derivate können zwei Rotamere identifiziert werden. Ihre relative Menge hängt vom Lösungsmittel ab.