Reactions of substituted (1,3-butadiene-1,4-diyl)magnesium, 1,4-bis(bromomagnesio)butadienes and 1,4-dilithiobutadienes with ketones, aldehydes and PhNO to yield cyclopentadiene derivatives and N-Ph pyrroles by cyclodialkenylation

1,4-Dilithiobutadiene derivatives 1, 1,4-bis(bromomagnesio)butadiene derivatives 2 and metallacyclic (1,3-butadiene-1,4-diyl)magnesium reagents 3 were prepared and their reactions with ketones, aldehydes, and PhNO were investigated. Multiply substituted cyclopentadienes and N-Ph pyrroles were formed by unprecedented reaction conditions. The carbonyl group of aldehydes and ketones was deoxygenated during the reaction and behaved formally as a one-carbon unit; the N==O moiety of PhNO was cleaved to afford N-Ph pyrrole derivatives. Furthermore, different reactivities among these three types of reagents 1, 2 and 3 were revealed. The 1,4-dilithium reagents 1 readily reacted with both aldehydes and ketones; the 1,4-dimagnesium reagents 2 reacted with aldehydes, but not ketones; the metallacyclopentadiene reagents of magnesium 3 showed higher reactivity and did react with ketones.     

A multipolymer system for organocatalytic alcohol oxidation

A system involving two polymer-supported reagents for the selective and organocatalytic oxidation of alcohols to aldehydes or ketones has been developed in which both polymeric reagents can be recovered and reused.     

Silica gel promotes reductions of aldehydes and ketones by N-heterocyclic carbene boranes

N-Heterocyclic carbene boranes (NHC-boranes) such as 1,3-dimethylimidazol-2-ylidine trihydridoborane (diMe-Imd-BH(3)) serve as practical hydride donors for the reduction of aldehydes and ketones in the presence of silica gel. Primary and secondary alcohols are formed in good yields under ambient conditions. Aldehydes are selectively reduced in the presence of ketones. One, two, or even all three of the boron hydrides can be transferred. The process is attractive because all the components are stable and easy to handle and because both the reaction and isolation procedures are convenient.     

Allyl transfer to aldehydes and ketones by Brønsted acid activation of allyl and crotyl 1,3,2-dioxazaborolidines

Alkyl dioxazaborolidines are air-stable and often crystalline organoboranes. A variety of Br?nsted acids activate allyl dioxazaborolidines to generate reactive allyl-transfer reagents in situ. These reagents add to aldehydes and ketones to generate the corresponding alcohols in good yields under mild conditions. The E- and Z-crotyl reagents react diastereoselectively with aldehydes and ketones to produce anti and syn adducts, respectively, a result consistent with a cyclic transition state (type I mechanism).     

Ionene-Bound Borohydrides: Efficient, Selective, and Versatile Polymer-Supported Reducing Agents

Summary. Reduction of structurally different carbonyl compounds, such as aldehydes, ketones, α,β-unsaturated enals and enones, acid chlorides, and imines was accomplished efficiently using high capacity ionene based borohydride reagents. Aldehydes and imines were reduced to the corresponding alcohols and amines in excellent yields in methanol at ambient temperature while ketones and acid chlorides were reduced in iso-propanol and THF-MeOH at reflux. Chemoselective reduction of aldehydes over ketones was achieved successfully with these reagents. Complete regioselectivity was also observed in the reduction of α,β-unsaturated aldehydes and ketones.     

Two-carbon homologation of aldehydes and ketones to α,β-unsaturated aldehydes

Phosphonate reagents were developed for the two-carbon homologation of aldehydes or ketones to unbranched- or methyl-branched α,β-unsaturated aldehydes. The phosphonate reagents, diethyl methylformyl-2-phosphonate dimethylhydrazone and diethyl ethylformyl-2-phosphonate dimethylhydrazone, contained a protected aldehyde group instead of the usual ester group. A homologation cycle entailed condensation of the reagent with the starting aldehyde, followed by removal of the dimethylhydrazone protective group with a biphasic mixture of 1 M HCl and petroleum ether. This robust two-step process worked with a variety of aldehydes and ketones. Overall isolated yields of unsaturated aldehyde products ranged from 71% to 86% after the condensation and deprotection steps.     

过渡金属催化的有机硼试剂对醛酮的不对称加成研究进展

手性芳基醇是一类重要的合成砌块,广泛存在于许多生物活性分子以及天然产物中,因此,高效高选择性地构建该类化合物是有机化学家们一直关注的研究热点.金属试剂对羰基化合物的不对称加成是构建手性芳基醇的一个简单高效的方法,其中,有机硼试剂由于其方便易得、稳定、低毒、官能团耐受性好等优点而被广泛用于醛、酮的不对称加成反应中.本文综述了过去二十年来过渡金属催化的有机硼试剂对醛、酮的不对称加成反应研究进展,并介绍了一些方法在生物活性手性分子合成中的应用.     

Generation and tandem reactions of 1-alkenyl-1,1-heterobimetallics: practical and versatile reagents for organic synthesis

A practical and straightforward method for generation of versatile 1-alkenyl-1,1-heterobimetallic intermediates and their application to construction of functionalized building blocks are disclosed. Beginning with readily available air-stable 1-alkynyl-1-boronate esters, hydroboration with dicyclohexylborane generates 1-alkenyl-1,1-diboro species. In situ transmetallation with dialkylzinc reagents furnishes 1-alkenyl-1,1-heterobimetallic intermediates. Direct treatment with aldehydes followed by workup allows isolation of B(pin)-substituted allylic alcohols in 70-95% yield. The B(pin)-substituted allylic alcohols react with NBS to afford (E)-alpha,beta-unsaturated aldehydes in 51-77% yield via a semipinacol-type rearrangement. In situ treatment of 1-alkenyl-1,1-heterobimetallic intermediates with aldehydes followed by TBHP oxidation enables the preparation of alpha-hydroxy ketones. Under optimized conditions, addition of 1-alkenyl-1,1-heterobimetallic intermediates to a variety of protected alpha- and beta-hydroxy aldehydes proceeds with good to excellent control over diastereoselectivity to furnish differentially protected dihydroxy ketones. The 1-alkenyl-1,1-heterobimetallic intermediates have also been employed in tandem aldehyde addition/Suzuki cross-coupling reactions to provide densely functionalized allylic alcohols in good to excellent yields.     

Use of S-pentafluorophenyl tris(2,4,6-trimethoxyphenyl)phosphonium acetate bromide and (4-hydrazino-4-oxobutyl) [tris(2,4,6-trimethoxyphenyl)phosphonium bromide for the derivatization of alcohols,aldehydes and ketones for detection by liquid chromatography/electrospray mass spectrometry

The synthesis of S-pentafluorophenyl tris(2,4,6-trimethoxyphenyl)phosphonium acetate bromide (TMPP-AcPFP) and the novel compound (4-hydrazino-4-oxobutyl) [tris(2,4,6-trimethoxyphenyl)phosphonium bromide (TMPP-PrG) is described and the use of these compounds as derivatizing reagents for alcohols, aldehydes and ketones evaluated. Methods have been developed for the pre-column derivatization of alcohols using TMPP-AcPFP and for aldehydes and ketones using TMPP-PrG. The reactions were investigated by the use of a variety of individual test compounds containing the target functional groups. The TMPP acetyl ester and TMPP propyl hydrazone derivatives formed with their respective target analytes produced an enhanced response in electrospray ionization mass spectrometry (ESI-MS), and reproducible chromatography. The use of these two reagents to derivatize and facilitate detection of alcohols (including sugars and steroids), aldehydes and ketones (including steroids) by LC/ESI-MS was investigated.     

Reactifs de Grignard vinyliques γ fonctionnels : III. Addition a quelques derives carbonyles

Δt^α,β-Butenolides can be obtained by carbonation of γ-functionally substituted vinylic Grignard reagents, prepared by addition of organomagnesium compounds to α-acetylenic or α-allenic alcohols. By addition to aldehydes and ketones, these vinylic Grignard reagents yield diols, which give unsaturated ethers by cyclization reactions.     

Selective oxidations with ceric methanesulfonate and ceric trifluoromethanesulfonate

Cerium(IV) in aqueous methanesulfonic acid and trifluoromethanesulfonic acid are excellent reagents for the oxidation of alkyl and polycyclic aromatics to aromatic aldehydes, ketones and quinones.     

Direct synthesis of B-allyl and B-allenyldiisopinocampheylborane reagents using allyl or propargyl halides and indium metal under Barbier-type conditions

We report the first one-pot process for the asymmetric addition of allyl, methallyl, and propargyl groups to aldehydes and ketones using B-chlorodiisopinocampheylborane ((d)DIP-Cl) and indium metal. Under Barbier-type conditions, indium metal was used to generate allyl- and allenylindium intermediates, and subsequent reaction with (d)DIP-Cl successfully promoted the transfer of these groups to boron forming the corresponding chiral borane reagents. The newly formed borane reagents were reacted with aldehydes and ketones to produce the corresponding alcohol products in high yields and up to excellent enantioselectivity (98% ee). This method produced excellent enantioenriched secondary homoallylic alcohols from the allylation and methallylation of benzaldehyde. Using this method, the methallylation and cinnamylation of ketones afforded the highest enantioselectivities, while the propargylation of both aldehydes and ketones provided low enantiomeric excesses. In addition, this procedure provided the first synthesis of B-allenyldiisopinocampheylborane, which was characterized by (1)H and (11)B NMR spectroscopy. This is the first example of the direct synthesis of allylboranes that contained substitutions from the corresponding allyl bromide and indium, thereby expanding the utility of the DIP-Cl reagent. Hence, a general and straightforward route to these chiral organoborane reagents in one-pot has been developed along with the asymmetric Barbier-type allylation and propargylation of aldehyde and ketone substrates using these chiral organoborane reagents in subsequent coupling reactions.     

Aldehydes as Alkylating Agents for Ketones

Common and non-toxic aldehydes are proposed as reagents for alkylation of ketones instead of carcinogenic alkyl halides. The developed reductive alkylation reaction proceeds in the presence of the commercially available ruthenium catalyst [(cymene)RuCl₂]₂ (as low as 250 ppm) and carbon monoxide as the reducing agent. The reaction works well for a broad substrate scope, including aromatic and aliphatic aldehydes and ketones. It can be carried out without a solvent and often gives nearly quantitative yields of the products. This straightforward and cost-effective method is promising not only for laboratory application but also for industry, which produces carbon monoxide as a large-scale waste product.     

Synthesis of trifluoromethyl ketones using polymer-supported reagents

A two step synthesis of trifluoromethyl ketones from aldehydes is reported. A combination of polymer-supported reagents and sequestering agents were employed to effect the transformation without the need for chromatographic purification.     

N-methoxy-n-methylamides as effective acylating agents

Readily preparable N-methoxy-N-methylamides couple in good yields with Grignard and organolithium reagents to produce ketones, and are reduced with hydrides to afford aldehydes.     

烯基取代的甲酸态四氢叶酸辅酶模型的合成及其碳单元转移反应

以邻苯二胺和乙酸为原料,经3步反应合成了8种烃基乙烯基取代的苯并咪唑盐,其结构用元素分析,¹HNMR,IR,MS和UV-Vis进行了表征,并以其作为取代的甲酸态四氢叶酸辅酶模型,同亲核试剂(格氏试剂)反应得到烃基乙烯基取代的一碳单元完全转移的产物α,β-不饱和酮,为α,β-不饱和酮的合成提供了一种简便的仿生合成新方法.     

Oxidation of alcohols to aldehydes and ketones using selenium ionic liquid

A new type of ionic liquid supported selenium reagents were synthesized and found to be an excellent catalyst in the oxidation of alcohols to aldehydes and ketones in the presence of 30%H₂O₂.The predictable solubility of ionic liquids allows an easy separation of the oxidation products from the reaction mixture.Furthermore,the oxidation reaction can be carried out using an ionic liquid as the solvent,and the ionic liquid-supported selenium reagents can be recycled and used for four times with a little decrease in catalytic performance.     

Saturated heterocycles, 162 [1]. synthesis and steric structures of 3,4-disubstituted 1,6,7,11b-tetrahydropyrimido[6,1-a]isoquinolin-2-ones

The reaction of 1-(hydrazidomethyl)-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline 3 with aromatic aldehydes yield hydrazones 4a,b or pyrimido[6,1-a]isoquinolines 5a-c depending upon the proportions of the reagents. With ketones, 3 gives only hydrazones 4a-d and 7 , which can be transformed to pyrimidoisoquinolines 10a-e and 11 with aldehydes. The ring closures are stereospecific; the relative configurations were determined by DNOE measurements.     

Reformatsky type reaction by means of Bu3SnA1et2 or Bu3Pba1et2

Treatment of α-halo carbonyl compounds with title Sn-Al or Pb-Al reagents provides enolates which react with aldehydes or ketones to give β-hydroxy carbonyl compounds effectively.     

A simple method for the synthesis of substituted benzylic ketones: homologation of aldehydes via the in situ generation of aryldiazomethanes from aromatic aldehydes

A general method for the homologation of aldehydes to benzylic ketones has been developed. Aryldiazomethanes were generated in situ in the presence of an aldehyde by simply heating the tosylhydrazones of aromatic aldehydes in the presence of a stoichiometric amount of base in polar protic solvents. The resulting polar protic solvent promoted homologation afforded benzylic ketones in moderate to excellent yields with a variety of aldehydes. Isolation of the tosylhydrazones was not necessary; they could be prepared in ethanol and carried through the sequence without isolation. This methodology allows easy access to a wide variety of substituted aryldiazomethanes that would be difficult, or even impossible, to prepare via conventional methods and circumvents the toxicity and stability problems associated with the isolation and/or handling solutions of aryldiazomethanes.