KF/Al2O3催化下2-氨基-4-芳基-4H-吡喃并[3,2-c]香豆素衍生物的一步合成

以芳醛、4-羟基香豆素和丙二腈或氰乙酸酯为原料, 在KF/Al₂O₃催化下以乙醇为溶剂, 在80 ℃合成了一系列2-氨基-4-芳基-4H-吡喃并[3,2-c]香豆素衍生物, 并通过IR, ¹H NMR和元素分析确证产物的结构.     

Solvent-Free Synthesis of 2-Amino-3-aryl-5-substituted Thiophenes as Anti-inflammatory Agents using KF-Al2O3 under Microwave Irradiation

The synthesis of 2-amino-3-aryl-5-substituted thiophenes as anti-inflammatory agents catalyzed by KF-Al₂O₃ under microwave irradiation is reported.     

KF/Al2O3催化下吡啶并[2,3-d]嘧啶衍生物的三组分一步合成

以芳醛、丙二腈和2,6-二羟基-4-氨基嘧啶为原料, 在KF/Al₂O₃催化下以乙醇为溶剂, 在80 ℃三组分一步合成了一系列吡啶并[2,3-d]嘧啶衍生物, 有趣的是在空气氧化作用下进一步发生了芳构化作用. 和其它合成方法相比, 该方法具有反应条件温和、容易操作和产率较高等优点, 并通过IR, ¹H NMR和元素分析确证产物的结构.     

Divergent Products Obtained from the Reactions of Salicylaldehyde and 4-Hydroxycoumarin in TEBAC-H2O,KF-Al2O3-EtOH,and Ionic Liquid

Controlling selectivity of the reactions of salicylaldehydes and 4-hydroxycoumarin in triethylbenzylammonium chloride–H₂O, ionic liquid, or KF-Al₂O₃-EtOH systems, respectively, resulted in the syntheses of three series of different coumarin derivatives.     

A Convenient Synthesis of 2‐Amino‐3‐cyano‐4‐aryl‐1,4,5,6‐tetrahydrobenzo[h]chromenes Derivatives Using KF‐Al2O3 as Catalyst

Abstract

A series of new 2‐amino‐3‐cyano‐4‐aryl‐1,4,5,6‐tetrahydrobenzo[h]chromenes derivatives were synthesized by the reaction of malononitrile with 2‐arylmethylidene‐3, 4‐dihydro‐1(2H)‐naphthalenone in N,N‐dimethylformamide (DMF) at 80°C catalyzed by KF‐Al₂O₃. The structure of the product was confirmed by x‐ray analysis.     

Fe3O4@SiO2–NH2 core-shell nanocomposite as an efficient and green catalyst for the multi-component synthesis of highly substituted chromeno[2,3-b]pyridines in aqueous ethanol media

ABSTRACT

An efficient and green approach for synthesizing chromeno[2,3-b]pyridine derivatives through one-pot three-component reactions of salicylaldehydes, thiols, and malononitrile has been developed by Fe₃O₄@SiO₂–NH₂ nanocatalyst in aqueous ethanol media under re?ux conditions. The present procedure provides several advantages such as environmentally benign, straightforward, excellent yields, short reaction times, cost-effective, good recyclability, little catalyst loading, and facile catalyst separation for the preparation of chromeno[2,3-b]pyridines as important privileged medicinal scaffold. In addition, aminopropyl-coated Fe₃O₄@SiO₂ nanoparticles were fully characterized by scanning electron microscopy, X-ray diffraction, energy dispersive analysis of X-ray, vibrating sample magnetometer, and FT-IR analysis.     

Preparation, characterization and catalyst application of ternary interpenetrating networks of poly 4-methyl vinyl pyridinium hydroxide-SiO2-Al2O3

In this work, Al₂O₃ was mixed with SiO₂ and poly 4-vinylpyridine by the sol-gel method in order to make a composite which is used as a heterogeneous basic catalyst for Knoevenagel condensation reaction. The physical and chemical properties of the composite catalyst were investigated by XRD, FT-IR, TG, BET and SEM techniques. The catalytic performance of each material was determined for the Knoevenagel condensation reaction between carbonyl compound and malononitrile. The reactions were performed in solvent-free conditions and the product was obtained in high yield and purity after a simple work-up. The effects of the amount of catalyst, amount of monomer for the synthesis of composite and recyclability of the heterogeneous composite were investigated. The composite catalyst used for this synthetically useful transformation showed considerable level of reusability besides very good activity.     

KF-alumina 催化下2-氨基-4-芳基-5,6-二氢化-4H-吡喃[3,2-c]喹啉-5-酮-3-羧酸酯衍生物的一步合成

以芳醛、氰乙酸酯和4-羟基喹啉-2-酮为原料, 乙醇为溶剂, 在KF-Al₂O₃催化下80 ℃, 一步合成了2-氨基-4-芳基-5,6-二氢化-4H-吡喃[3,2-c]喹啉-5-酮-3-羧酸酯衍生物, 和其它方法相比, 具有反应条件温和, 容易操作和产率高等优点, 产物4a的结构通过X单晶衍射分析确证.     

K2CO3-Mediated,One-Pot,Multicomponent Synthesis of Medicinally Potent Pyridine and Chromeno[2,3-b]pyridine Scaffolds

An efficient one-pot, multicomponent synthesis of 3,5-dicyanopyridines has been developed from the reaction of malononitrile and different thiophenol or thiols with a variety of aldehydes (aromatic including hindered ones, heteroaromatic, and aliphatic) in the presence of 20 mol% of K₂CO₃ in refluxing 50% aqeuous ethanol. KMnO₄ has been utilized as a readily available, inexpensive oxidant for the in situ transformation of the initially formed dihydropyridine intermediate. K₂CO₃ also mediates the one-pot formation of chromeno[2,3-b]pyridines from reaction of salicylaldehyde or its analogs with malononitrile and thiol or thiophenols. Both of these conditions also work equally well under 50-fold scale-up conditions.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Influence of the texture of chromia catalysts on their activity in synthesis of 2-methylthiophene

The texture of Cr₂O₃-K₂O/Al₂O₃catalysts containing oxides of rare earth elements (REE) was studied. The catalysts are used for the synthesis of 2-methylthiophene by the reaction of H₂S with n-pentane or piperilene. The heterocyclization of n-pentane is a consecutive reaction involving a step of dehydrogenation of initial hydrocarbon. At this step the texture of the catalyst affects the yield of 2-methylthiophene. The yield of 2-methylthiophene obtained from piperilene and I₂S is independent of the catalyst texture.     

Effect of FeO x on the electrocatalytic properties of NiCo2O4 for O2 evolution from alkaline solutions

Mixtures of NiCo₂O₄ and FeO _x were obtained by thermal decomposition of the nitrates of Ni, Co, and Fe in appropriate proportions. Two series of electrodes were prepared: (1) at constant composition (20 mol% FeO _x ) and various calcination temperatures in the range 200 to 480 °C and (2) at constant calcination temperature (300 °C) and various compositions in the whole composition range 0 to 100 mol% FeO _x . The oxide layers were characterized by thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, and cyclic voltammetry. Experimental data showed that the layers consist of a mixture of phases in which Fe oxide is present as Fe₂O₃. The electrocatalytic properties were assessed by means of quasi-stationary potentiostatic current-potential curves for the O₂ evolution reaction from alkaline solution. Results have shown that the mechanism of O₂ evolution depends on composition moderately. The electrocatalytic activity appears to depend on composition only slightly. Dedicated to Professor Oleg Petrii on the occasion of his 70th birthday on August 24th, 2007.     

Solid-solid interactions in pure and Li2O-doped manganese and magnesium mixed oxides system

The solid-solid interactions between manganese and magnesium oxides in absence and in presence of small amounts of Li₂O have been investigated. The molar ratios between manganese and magnesium oxides in the form of Mn₂O₃ and MgO were varied between 0.05:1 to 0.5:1. The mixed solids were calcined in air at 400-1000°C. The techniques employed were DTA, XRD and H₂O₂ decomposition at 20-40°C.The results obtained revealed that solid-solid interactions took place between the reacting solids at 600-1000°C yielding magnesium manganates (Mg₂MnO₄, Mg₆MnO₈, MgMnO₄ besides unreacted portions of MgO, Mn₂O₃ and Mn₃O₄). Li₂O-doping (0.75-6 mol%) of the investigated system followed by calcination at 600 and 800°C decreased progressively the intensity of the diffraction lines of Mn₂O₃ (Bixbyite) with subsequent increase in the lattice parameter 'a' of MgO to an extent proportional to the amount of Li₂O added. This finding might suggest that the doping process enhanced the dissolution of Mn₂O₃ in MgO forming solid solution. This treatment led also to the formation of Li₂MnO₃. Furthermore, the doping with 3 and 6 mol% Li₂O conducted at 800°C resulted in the conversion of Mn₂O₃ into Mn₃O₄, a process that took place at 1000°C in absence of Li₂O. The produced Li₂MnO₃ phase remained stable by heating at up to 1000°C. Furthermore, Li₂O doping of the investigated system at 400-1000°C resulted in a progressive measurable increase in the particle size of MgO.The catalytic activity measurements showed that the increase in the molar ratio of Mn₂O₃ in the samples precalcined at 400-800°C was accompanied by a significant increase in the catalytic activity of the treated solids. The maximum increase in the catalytic activity expressed as reaction rate constant measured at 20°C (k _20°C) attained 3.14, 2.67 and 3.25-fold for the solids precalcined at 400, 600 and 800°C, respectively. Li₂O-doping of the samples having the formula 0.1 Mn₂O₃/MgO conducted at 400-600°C brought a progressive significant increase in its catalytic activity. The maximum increase in the value of k _20°C due to Li₂O attained 1.93 and 2.75-fold for the samples preheated at 400 and 600°C, respectively and opposite effect was found for the doped samples preheated at 800°C.This revised version was published online in November 2005 with corrections to the Cover Date.     

The condensation of active methylene reagents with salicylaldehyde: Novel synthesis of chromene,azaanthracene, pyrano[3,4‐c]chromene and chromeno[3,4‐c]pyridine derivatives

On heating of the cyanoacetic acid cyclopentylidene hydrazide 1 with salicylaldehyde in the presence of bases the azaanthracene derivative 6 was formed. Also, reaction of 3 with malononitrile and ketones 10a,b afforded the pyrano[3,4‐c]chromene 9 and chromeno[3,4‐c]pyridine 11 respectively. A mechanism for these reactions is proposed.     

g-C_3N_4/CaTi_2O_5复合材料制备及其光催化性能

利用类石墨氮化碳(g-C_3N_4)和亚稳相钙钛氧化物(CaTi_2O_5)固相法制备C_3N_4/CaTi_2O_5复合材料。利用X射线衍射(XRD)、金相显微镜、扫描电子显微镜(SEM)及附带能谱分析仪(EDS)和N2吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计(UV-Vis)测试了样品的光吸收性能,研究C_3N_4与CaTi_2O_5物质的量之比(nC_3N_4/nCaTi_2O_5)对C_3N_4/CaTi_2O_5复合样品的物相结构和微观形貌的影响,同时考察C_3N_4/CaTi_2O_5复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明:相比纯C_3N_4和CaTi_2O_5样品,C_3N_4/CaTi_2O_5复合样品在可见光下具有较高的光催化性能,随着nC_3N_4/nCaTi_2O_5增加,样品的光催化降解率随之增加而后降低,当nC_3N_4/nCaTi_2O_5=1∶1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

g-C3N4/CaTi2O5复合材料制备及其光催化性能

利用类石墨氮化碳（g-C₃N₄）和亚稳相钙钛氧化物（CaTi₂O₅）固相法制备C₃N₄/CaTi₂O₅复合材料。利用X射线衍射（XRD）、金相显微镜、扫描电子显微镜（SEM）及附带能谱分析仪（EDS）和N₂吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计（UV-Vis）测试了样品的光吸收性能,研究C₃N₄与CaTi₂O₅物质的量之比（n_C3N4/nCaTi₂O₅）对C₃N₄/CaTi₂O₅复合样品的物相结构和微观形貌的影响,同时考察C₃N₄/CaTi₂O₅复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明：相比纯C₃N₄和CaTi₂O₅样品,C₃N₄/CaTi₂O₅复合样品在可见光下具有较高的光催化性能,随着n_C3N4/nCaTi₂O₅增加,样品的光催化降解率随之增加而后降低,当n_C3N4/nCaTi₂O₅=1：1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

An Efficient Procedure for the Synthesis of Benzoxazole and Benzothiazole Derivatives Using a H2O2/SiO2-FeCl3 System

A series of benzoxazole and benzothiazoles was readily prepared from the reaction of ortho-aminophenol/ortho-aminothiophenol and aldehydes using solid silica supported ferric chloride (SiO₂-FeCl₃) as catalyst followed by oxidation with H₂O₂ under ambient conditions. Some of advantages of this method are a simple and convenient procedure, easy purification, and shorter reaction times.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

合成方法对Rh/CeO2-ZrO2-La2O3催化剂的结构、表面性能及DeNOx活性的影响

用沉积沉淀法合成两种不同系列的CeO2-ZrO2-La2O3混合氧化物(ZrO2和La2O3沉积CeO2粒子(标记为A-x)以及CeO2和La2O3沉积ZrO2粒子(标记为B-x)),并用作Rh催化剂的载体。XRD、拉曼、TPR、XPS和O2脉冲等表征结果显示出不同的沉积顺序将导致不同的结构和氧化还原性能,且B-x具有更高的氧迁移性、储氧能力和表面Ce浓度。当其负载Rh后,Rh/B-x催化剂具有更高的NO和CO转化率及N2选择性,且Ce的最佳含量为50at%。这可能归因于Rh负载于富铈表面形成更多有利于NO分解的表面Ce3+活性位。     

Oxidation of Thiols Using K 2 S 2 O 8 in Ionic Liquid

A green, straightforward, and novel method for oxidation of thiols to the corresponding disulfides is reported using K ₂ S ₂ O₈ in the ionic liquid 1-butyl-3-methylimidazolium bromide [(bmim)Br] at 65–70°C. The corresponding disulfides were obtained in excellent yield and short reaction time.     

Kinetics of the decomposition of calcium carbonate in the presence of Bi2O3

Former studies concerning the formation of the compounds in the pseudobinary systems of Bi₂O₃-MO type (M =Ca, Sr, Ca+Sr) have shown that the reaction which occurs with the highest rate is that between Bi₂O₃ and CaO. In the present work CaCO₃ was used as CaO source. We carried out an investigation of the thermal decomposition of CaCO₃ in the presence of Bi₂O₃ in comparison with the decomposition of pure CaCO₃.The presence of Bi₂O₃ exerts a complex influence on the CaCO₃ decomposition acting on the nucleation as well as on the diffusion of CO₂. The decomposition of the samples with low Bi₂O₃ content follows the mechanism of a contracting sphere. A change from surface nucleation to bulk nucleation is recorded for higher amounts of Bi₂O₃.     

Crystal structure of Li2Cu3(SeO3)2(SeO4)2

Summary Single crystal X-ray data of the hydrothermally grown new phase Li₂Cu₃(SeO₃)₂(SeO₄)₂ were measured with a four-circle diffractometer up to sin /=0.81 Å^–1 [I2/a,Z=4,V=1175.5 ų,a=16.293(6),b=5.007(2),c=14.448(6) Å, = 94.21(1)°]. The structure was determined by direct and Fourier methods and refined toR=0.034,R _w =0.027 for 2 086 independent reflections.Cu(1)^[4+1]O₅ forms a tetragonal pyramid, Cu(2)^{[4 + 2]}O₆ is a strongly elongated octahedron. The Li atom is surrounded by four O atoms forming a distorted tetrahedron. Se(IV)O₃ and Se(VI)O₄ groups are in accordance to literature, mean Se-O bond lengths are 1.714 and 1.644 Å.

---

Die Kristallstruktur von Li₂Cu₃(SeO₃)₂(SeO₄)₂

Zusammenfassung Einkristall-Röntgendaten der hydrothermal gezüchteten neuen Phase Li₂Cu₃(SeO₃)₂(SeO₄)₂ wurden mit einem Vierkreisdiffraktometer im Bereich bis zu sin /=0.81 Å^–1 gemessen [I2/a,Z=4,V=1175.5 ų,a=16.293(6),b=5.007(2),c=14.448(6) Å, =94.21(1)°]. Die Kristallstruktur wurde mittels direkter und Fourier-Methoden bestimmt und für 2 086 unabhängige Reflexe zuR=0.034,R _w =0.027 verfeinert.Cu(1)^[4+1]O₅ bildet eine tetragonale Pyramide, Cu(2)^[4+2]O₆ ist ein stark verlängertes Oktaeder. Das Li-Atom ist von vier O-Atomen in Gestalt eines verzerrten Tetraeders umgeben. Die Se(IV)O₃-und Se(VI)O₄-Gruppen entsprechen der Literatur, die mittleren Se-O-Abstände betragen 1.714 und 1.644 Å.