抗坏血酸在β-环糊精/二茂铁甲酸修饰电极上的电化学行为及测定

利用主客体化学反应将二茂铁甲酸包络在β-环糊精聚合物的空穴中,用新鲜蛋清作交联剂制成β-环糊精聚合物/二茂铁甲酸化学修饰玻碳电极,用电化学阻抗法和循环伏安法研究了修饰电极的电化学性能。在pH 7.0的磷酸盐缓冲溶液中,该修饰电极对抗坏血酸的电化学氧化有很好的催化活性,氧化峰电流与其浓度在6.2×10-6~5.0×10-3mol/L范围内呈良好的线性关系,线性回归方程为ip=0.4375+0.0301C(ip:μA,C:μmol/L),相关系数r=0.9982,检出限为1.0×10-6mol/L。抗坏血酸和多巴胺在修饰电极上于不同的电位(ΔE=490 mV)被氧化,可用于多巴胺存在下选择性测定抗坏血酸。     

吡啶 -Dawson型磷钼杂多酸超分子薄膜修饰电极

采用电化学方法在玻碳电极上制备了吡啶 -Dawson型磷钼杂多酸超分子配合物薄膜修饰电极。研究了它在 0.3 mol/L H2SO4溶液中的电化学行为及其对酸性水溶液中抗坏血酸的电催化氧化作用。发现膜电极对抗坏血酸的催化峰电流与其浓度在 3.5× 10-5～ 5.0× 10-3 mol/L范围内呈良好的线性关系,线性相关系数 r=0.999 1,检出限 8.0× 10-6 mol/L,用于维生素 C片剂的测定,结果令人满意。初步探讨了电催化氧化机理。     

聚氨基磺酸修饰玻碳电极在抗坏血酸共存时测定肾上腺素

研究了聚氨基磺酸修饰玻碳电极的制备及肾上腺素和抗坏血酸在此修饰电极上的电化学行为。在磷酸盐缓冲液pH为 7. 0的条件下,肾上腺素在修饰电极上呈现 2个氧化峰和 1个还原峰。其峰电位都随着pH值的增加而负移。当肾上腺素与抗坏血酸共存时,EP较正处氧化峰电位与AA氧化峰电位差达 190mV。肾上腺素氧化峰电流与其浓度在 1. 0×10-7 ~1. 0×10-4 mol/L的范围时呈良好的线性关系,其线性回归方程为ip(10μA) = 1. 455 + 0. 3765C(mol/L), 相关系数r=0. 9977,检出限为 1. 0×10-8 mol/L。实验结果表明:该修饰电极能同时测定肾上腺素和抗坏血酸; 100倍的马尿酸、半胱氨酸、柠檬酸不干扰测定。方法用于注射液中肾上腺素的检测,结果令人满意。     

多巴胺在聚2,4,6-三甲基吡啶修饰电极上的电化学行为

用循环伏安法制备了聚 2 ,4 ,6 三甲基吡啶修饰玻碳电极 ,研究了神经递质多巴胺在该聚合物薄膜修饰电极上的电化学行为。实验结果表明 :在pH 7.4磷酸盐缓冲溶液中 ,多巴胺在该修饰电极上的线性范围为4 .0× 10 -6～ 1.0× 10 -5mol/L。该修饰电极对抗坏血酸无响应 ,从而可有效消除其对多巴胺测定的干扰     

溶胶-凝胶-钴-邻菲啰啉修饰电极对一氧化氮的电催化氧化及其测定

报道了溶胶 凝胶 钴 邻菲口罗啉膜修饰电极的制备方法及其在一氧化氮(NO)检测中的应用,采用循环伏安法(CV)研究修饰电极的电化学特性,差示脉冲伏安法(DPV)对NO进行检测。该修饰电极对NO的电化学氧化具有很好的催化作用,使其氧化电位负移了210mV,氧化峰电流与NO浓度在5.6×10-8～2.8×10-5mol/L范围内呈良好的线性关系,相关系数r=0.999,检测限为1.4×10-8mol/L,且生物体内常见的干扰物质如抗坏血酸、NO2-和儿茶酚胺类神经递质的代谢物等不干扰测定。     

多巴胺在聚硫堇和Nafion双层修饰玻碳电极上的电化学行为

用电化学聚合法在玻碳电极上制备聚硫堇,然后涂渍一层Nafion膜,采用循环伏安法研究其制备和电化学性质。该电极峰电流与多巴胺(DA)在2.00×10-7~1.43×10-3mol/L浓度范围内呈良好的线性关系,检出限为6.67×10-8mol/L,相关系数为0.995。该修饰电极有效排除了抗坏血酸(AA)的干扰。并且具有良好的灵敏度、重现性、稳定性,可用于实际样品中DA的测定。     

聚吖啶红修饰玻碳电极测定肾上腺素

研究了聚吖啶红修饰玻碳电极的制备及肾上腺素在此修饰电极上的电化学行为.肾上腺素浓度在1.0×10-6～1.0×10-4 mol/L的范围内与其氧化峰电流呈线性关系,回归方程为ip(10μA)=1.160+0.4390c(mol/L),相关系数R=0.9981,检出限是10-7 mol/L.实验结果表明该修饰电极能有效消除抗坏血酸的干扰,方法用于注射液中肾上腺素的检测,其回收率在93.7～100.3%范围内.     

5-HIAA在MWNT-Nation修饰电极上的伏安行为

研究了在磷酸盐缓冲溶液（pH7．0）中，5-羟基吲哚乙酸（5-HIAA）在MWNT-Nafion修饰电极上的电化学行为。5-HIAA在MWNT-Nafion修饰电极上出现一个灵敏的氧化峰。与裸玻碳电极相比，MWNT—Nation修饰电极提高5-HIAA的氧化峰电流。优化了各项测定参数，建立了一种直接测定HIAA的电分析方法。富集电位为-0．5V，富集时间为300s，氧化峰电流与5-HIAA的浓度在9．95×10^-5～7．98×10^-3mol／L之间有良好的线性关系。检出限为2．5×10^-6 mol／L。     

己硫醇二茂铁复合金纳米粒子修饰电极对多巴胺的催化性能研究

将自行合成的己硫醇二茂铁自组装于金纳米粒子表面,获得己硫醇二茂铁复合金纳米粒子（Au@S（CH2）6Fc）。采用滴涂法将制备的复合纳米粒子固定于玻碳电极表面,制备Au@S（CH2）6Fc修饰电极,采用循环伏安法对修饰电极的电化学性能进行考察。将制备的修饰电极用于对神经递质多巴胺（DA）的催化氧化性能研究。结果表明,该修饰电极对DA具有显著的催化氧化作用,线性范围为1.0×10^-6-2.6×10^-3mol/L,检出限为3.0×10^-7mol/L。     

碳纳米管修饰电极对多巴胺和肾上腺素的电分离及同时测定

研究了多巴胺 (DA)和肾上腺素 (EP)在多壁碳纳米管 (MWNT)修饰电极上的电化学性质 ,发现该修饰电极对神经递质DA和EP有显著的增敏和电分离作用。还原峰电位差达ΔEp=390mV ,可同时测定DA和EP。DA和EP的还原峰电流与其浓度分别在 2 .0× 10 -6～ 1.0× 10 -3 mol/L和 1.0× 10 -6～ 1.0× 10 -3 mol/L浓度范围内呈良好的线性关系 ;方法的检出限分别为 1× 10 -6mol/L和 5× 10 -7mol/L。由于抗坏血酸 (AA)在MWNT修饰电极上的氧化是不可逆的 ,因此利用还原峰进行测定 ,消除了AA对DA和EP的干扰     

Meldola's Blue Immobilized on a SiO2/SnO2/Phosphate Xerogel,a New Sensor for Determination of Ascorbic Acid in Medicine and Commercial Fruit Juice

A modified carbon paste electrode with SiO₂/SnO₂/Phosphate/Meldola's blue, SSPMelB, was used to study the electrocatalytic oxidation of ascorbic acid by cyclic voltammetry and chronoamperometry. The adsorbed dye mediates ascorbic acid oxidation at an anodic potential of 0.04 V vs. saturated calomel electrode (SCE) at pH 7.0, in 0.5 mol L^?1 solution. The linear range of the sensor is between 4.0×10^?7 and 2.0×10^?3 mol L^?1, with a limit of detection of 4.0×10^?7 mol L^?1. This novel electrode shows good analytical performance for determination of ascorbic acid in medicine and commercial fruit juice.     

Electrocatalytic Oxidation of Catechol at Multi‐Walled Carbon Nanotubes Modified Electrode

In 0.05 mol/L phosphate buffer solution (pH 7.0), carbon nanotubes modified electrode exhibits rapid response, strong catalytic activity with high stability toward the electrochemical oxidation of catechol. The electrochemical behavior of catechol on both the multi‐walled and single‐walled carbon nanotubes modified electrode was investigated. The experimental conditions, such as pH of the solution and scan rate were optimized. The currents (measured by constant potential amperometry) increase linearly with the concentrations of catechol in the range of 2.0×10^?5–1.2×10^?3 mol/L. Moreover, at the multi‐walled carbon nanotubes modified electrode the electrochemical responses of catechol and ascorbic acid can be separated clearly.     

The electrochemical oxidation of pentachlorophenol and its sensitive determination at chitosan modified carbon paste electrode

We report on a novel electrochemical method to detect trace pentachlorophenol (PCP) by using a chitosan (CS) modified carbon paste electrode (CS/CPE). Compared with that at a bare carbon paste electrode (CPE), the current response was greatly improved at the CS/CPE due to the enhancement effect of CS. Under optimal working conditions, the oxidation peak current of PCP was proportional to its concentration in the range of 1.0 × 10^?7 to 5.0 × 10^?6 and 5.0 × 10^?6 to 1.0 × 10^?4 mol/L, with an extremely low detection limit of 4.0 × 10^?8 mol/L. Our method was successfully used to detect the PCP concentration in vegetable samples.     

Electrocatalytic Behavior of Glassy Carbon Electrodes Modified with Multiwalled Carbon Nanotubes and Cobalt Phthalocyanine for Selective Analysis of Dopamine in Presence of Ascorbic Acid

This work describes the development, electrochemical characterization and utilization of a cobalt phthalocyanine modified carbon nanotube electrode for the quantitative determination of dopamine in 0.2 mol L^?1 phosphate buffer contaminated with high concentration of ascorbic acid. The electrode surface was analyzed by cyclic voltammetry and electrochemical impedance spectroscopy which showed a modified surface presenting a charge transfer resistance of 500 Ω, against the 16.46 kΩ value found for the bare glassy carbon surface. A pseudo rate constant value of 5.4×10^?4 cm s^?1 for dopamine oxidation was calculated. Voltammetric experiments showed a shift of the peak potential of DA oxidation to less positive value at 390 mV as compared with that of a bare GC electrode at 570 mV. The electrochemical determination of dopamine, in presence of ascorbic acid in concentrations up to 0.1 mol L^?1 by differential pulse voltammetry, yielded a detection limit as low as 2.56×10^?7 mol L^?1.     

A sensitive electrochemical sensor for detection of rutin based on a gold nanocage‐modified electrode

In this article, an electrochemical sensor based on a gold nanocage (AuNC)‐modified carbon ionic liquid electrode (CILE) was fabricated and applied to the sensitive rutin determination. The presence of AuNCs on the electrode surface greatly improved the electrochemical performance of the working electrode due to its specific microstructure and high metal conductivity. Electrochemical behavior of rutin on AuNCs/CILE was studied using cyclic voltammetry and differential pulse voltammetry with the related electrochemical parameters calculated. Under the optimal experimental conditions, the oxidation peak current of rutin and its concentration had good linear relationship in the range from 4.0 × 10^?9 to 7.0 × 10^?4 mol/L with a low detection limit of 1.33 × 10^?9 mol/L (3σ). This fabricated AuNCs/CILE was applied to direct detection of the rutin concentration in drug samples with satisfactory results, showing the real application of AuNCs in the field of chemically modified electrodes.     

Electrochemical Behavior and Determination of L‐Tyrosine at Single‐walled Carbon Nanotubes Modified Glassy Carbon Electrode

Based on single‐walled carbon nanotubes (SWCNTs) modified glassy carbon electrode (GCE/SWCNTs), a novel method was presented for the determination of L ‐tyrosine. The GCE/SWCNTs exhibited remarkable catalytic and enhanced effects on the oxidation of L ‐tyrosine. In 0.10 mol/L citric acid‐sodium citrate buffer solution, the oxidation potential of L ‐tyrosine shifted negatively from +1.23 V at bare GCE to +0.76 V at GCE/SWCNTs. Under the optimized experimental conditions, the linear range of the modified electrode to the concentration of L ‐tyrosine was 5.0×10^?6–2.0×10^?5 mol/L (R₁=0.9952) and 2.7×10^?5–2.6×10^?4 mol/L (R₂=0.9998) with a detection limit of 9.3×10^?8 mol/L. The kinetic parameters such as α (charge transfer coefficient) and D (diffusion coefficient) were evaluated to be 0.66, 9.82×10^?5 cm² s^?1, respectively. And the electrochemical mechanism of L ‐tyrosine was also discussed.     

Electrochemical Determination of Ascorbic Acid in Room Temperature Ionic Liquid BPPF6 Modified Carbon Paste Electrode

A room temperature ionic liquid N‐butylpyridinium hexafluorophosphate (BPPF₆) was used as a binder to make an ionic liquid modified carbon paste electrode (IL‐CPE), which showed good characteristics such as simple preparation procedure, fast electrochemical response and good conductivity. The electrochemical oxidation of ascorbic acid (AA) on the new IL‐CPE was carefully studied. The oxidation peak potential of AA on the IL‐CPE appeared at 109 mV (vs. SCE), which was about 338 mV decrease of the overpotential compared to that obtained on the traditional carbon paste electrode (CPE) and the oxidation peak current was increased for about four times. The electrochemical parameters of AA on the IL‐CPE were calculated with the charge transfer coefficient (α) and the electrode reaction rate constant (k_s) as 0.87 and 0.800 s^?1, respectively. Based on the relationship of the oxidation peak current and the concentration of AA a sensitive analytical method was established with cyclic voltammetry. The linear range for AA determination was in the range from 1.0×10^?5 to 3.0×10^?3 mol/L with the linear regression equation as I_p (μA)=?2.52–0.064C (μmol/L) (n=13, γ=0.9942) and the detection limit was calculated as 8.0×10^?6 mol/L (3σ). The proposed method was free of the interferences of coexisting substances such as dopamine (DA) and amino acids etc., and successfully applied to the vitamin C tablets determination.     

Amperometric Sensor for Detection of the Reduced Form of Nicotinamide Adenine Dinucleotide Using a Poly(pyronin B) Film Modified Electrode

An electrochemical method for the preparation of poly(pyronin B) film was proposed in this paper. A poly(pyronin B) (poly(PyB)) film modified glassy carbon electrode (GCE) has been fabricated via an electrochemical oxidation procedure and applied to the electrocatalytic oxidation of reduced form of nicotinamide adenine dinucleotide (NADH). The poly(PyB) film modified electrode surface has been characterized by atomic force microscope (AFM), scanning electron microscope (SEM), electrochemical impedance spectroscopy (EIS), UV‐visible absorption spectrophotometry (UV‐vis) and cyclic voltammetry (CV). These studies have been used to investigate the poly(PyB) film, which demonstrates the formation of the polymer film and the excellent electroactivity of poly(PyB) in neutral and even in alkaline media. Due to its potent catalytic effects towards the electrooxidation of NADH at lower potential (0.0 V), poly(PyB) film modified electrode can be used for the selective determination of NADH in real samples because of dopamine, ascorbic acid and uric acid oxidation can be avoided at this potential. The catalytic peak currents are linearly dependent on the concentrations of NADH in the range of 1.0×10^?6 to 5.0×10^?4 mol/L with correlation coefficients of 0.999. The detection limits for NADH is 0.5×10^?6 mol/L. Poly(PyB) modified electrode also shows good stability and reproducibility due to the irreversible attachment of polymer film at GCE surface.     

Electrocatalytic Determination of Ascorbic Acid at the Surface of 2,7‐Bis(ferrocenyl ethyl)fluoren‐9‐one Modified Carbon Paste Electrode

A chemically modified carbon paste electrode with 2,7‐bis(ferrocenyl ethyl)fluoren‐9‐one (2,7‐BFEFMCPE) was employed to study the electrocatalytic oxidation of ascorbic acid in aqueous solution using cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The diffusion coefficient (D=1.89×10^?5 cm² s^?1), and the kinetic parameter such as the electron transfer coefficient, α (=0.42) of ascorbic acid oxidation at the surface of 2,7‐BFEFMCPE was determined using electrochemical approaches. It has been found that under an optimum condition (pH 7.00), the oxidation of ascorbic acid at the surface of such an electrode occurs at a potential about 300 mV less positive than that of an unmodified carbon paste electrode. The catalytic oxidation peak currents show a linear dependence on the ascorbic acid concentration and linear analytical curves were obtained in the ranges of 8.0×10^?5 M–2.0×10^?3 M and 3.1×10^?5 M–3.3×10^?3 M of ascorbic acid with correlation coefficients of 0.9980 and 0.9976 in cyclic voltammetry and differential pulse voltammetry, respectively. The detection limits (2δ) were determined to be 2.9×10^?5 M and 9.0×10^?6 M with cyclic voltammetry and differential pulse voltammetry, respectively. This method was also examined for determination of ascorbic acid in pharmaceutical preparations.     

A Selective Voltammetric Method for Detecting Dopamine at Quercetin Modified Electrode Incorporating Graphene

The development of a quercetin‐graphene composite‐modified glassy carbon electrode (Qu/GH/GCE) for the selective and sensitive detection of dopamine (DA) is described in this paper. To fabricate the Qu/GH/GCE, graphene (GH) was first coated onto the surface of a glassy carbon electrode (GCE) and then quercetin (Qu) was electrodeposited on the GH matrix. Transmission electron microscopy (TEM) was used to characterize the morphology of the obtained GH and Qu/GH, and the electrochemical properties of the modified electrode were studied using electrochemical techniques. The as‐prepared Qu/GH/GCE occupied a synthetic property between GH and Qu. The common overlapped electrochemical oxidation peaks of DA and AA were completely separated and a remarkable increasing electron‐oxidation current of DA occurred on the Qu/GH/GCE, which enabled the sensitive and selective electrochemical detection of DA in the presence of ascorbic acid (AA) with peak difference of ca. 452 mV between DA and AA. The peak current obtained at 0.174 V (vs. saturated calomel electrode, SCE) from differential pulse voltammetry (DPV) is linearly dependent on the DA concentration in the range from 3.0×10^?8 to 4.0×10^?4 mol/L with a detection limit of 1.0×10^?8 mol/L. Furthermore, the Qu/GH/GCE exhibits good reproducibility and stability, and has been used for the determination of DA in samples of rat’s striatum tissue with satisfactory results.