Melittin and ionic surfactant interactions in monomolecular films

The interaction between the anionic and cationic surfactants with Melittin spread monolayers at the air-water interface was investigated. The addition of anionic Cl^–, under the films of Melittin gives rise to a change in both surface pressure and surface potential. These interactions are different when surfactants are present, due to specific interactions between Melittin and the ionic-surfactants.     

Effect of polymerized silicic acid on mixed lipid-protein monolayers used as cell membrane models. I. Hemoglobin-stearoyl erythroceramide films

The effect of polysilicic acid on mixed monolayers of hemoglobin and stearoyl erythroceramide used as cell membrane models has been studied. The presence of the sphingolipid at the interface stabilizes the hemoglobin monolayer, hindering expulsion of its residues from the surface when the collapse pressure (ca. 23 mN/m) is reached. The interaction between the components of the mixed film results in non-additivity of their molecular areas to a degree depending on film composition and substrate pH. The presence of polysilicic acid in the substrate increases the miscibility of the components in the mixed monolayer as a result of ionic interaction between the silicic acid and the protein.     

Interaction of nitrophenols with lipids at the air/water interface

The uptake of ortho and para nitrophenol to charged and neutral lipid monolayers spread at the air/solution interface was studied by reflection spectroscopy. The adsorption characteristics of the two nitrophenols have been studied by measuring the surface pressure and surface potential as a function of molecular area of the different lipid monolayers in the presence of nitrophenols in the subphase. The results have been interpreted in terms of the electrostatic interaction between the negatively charged dissociated phenolate ions and the positively charged head group of dioctadecyldimethylammonium bromide monolayers.     

Polymethylmethacrylate and stearic acid compatibility in monolayers

Mixed monolayers of polymethylmethacrylate (PMMA) and stearic acid (SA) on substrates with different pH are examined at 25 °C.The spreading isotherms of the pure components and their mixtures in different molar ratios indicate a critical pH value of the support, above which the components are miscible.This limiting pH value, which is confirmed also by surface potential measurements, allows a sufficient ionization of the carboxilic acid.This study was supported by CNR and MPI.     

Azeotropic transformation in mixed monolayers of octadecylurea and hexadecylurea

The surface pressure of mixed monolayers of octadecylurea and hexadecylurea has been measured as a function of mean area per molecule at various temperatures and compositions. The surface pressure of the phase transition obtained was observed to decrease both with an increase in temperature and with an addition of another component. With the aid of the thermodynamic method developed previously, the apparent molar entropy and energy changes associated with the phase transition were found to be positive. These positive values were explained by the rupture of the intermolecular hydrogen bonding. Furthermore, the activity coefficients of film-forming components with reference to their respective pure components were considered in connection with the mutual interaction between octadecylurea and hexadecylurea molecules. It was concluded that the system exhibits the negative azeotropy as a result of the difficulty in forming the hydrogen bonding in the mixed monolayer.     

Behavior of pure and mixed DPPC liposomes spread or adsorbed at the air-water interface

Liposomes from pure dipalmitoylphosphatidylcholine (DPPC) and mixed DPPC: distearoylphosphatidylcholine (DSPC): soybean lecithin (SL) prepared by the Bangham method with sonication were dispersed into solution or spread at the interface and the kinetics of the surface film formation was studied by measuring and recording the evolution of superficial tension, surface potential, and superficial (¹⁴C labeled) DPPC density.A simple theoretical approach can describe these kinetics by two processes: irreversible diffusion of closed vesicles into or from the bulk phase, and irrevers ible transformation of closed spherical vesicles into destroyed ones which form the surface film. Diffusion controls the phenomenon for small initial amounts of liposomes.Transformation controls the phenomenon for important initial amounts of liposomes. The kinetic constant of the transformation,K, does not depend on the technique used to form the surface film (spreading or adsorption).The equilibrium and rheological properties of surface films formed after liposome spreading are compared to those of monolayers     

Macromolecular conformations at the water-air interface: Interactions between alpha and beta conformations of polypeptides

Bidimensional miscibility between alpha and beta conformations of polypeptides was investigated at the water-air interface in the 15°–30°C temperature range. The polypeptides were poly--methyl-L-glutamate (PGMG), poly--benzyl-L-glutamate (PGBG) and poly--benzyl-L-aspartate (PBBA). The polypeptide conformations, alpha or beta, were checked by IR spectroscopy using the MIR technique.The spreading isotherms for mixed monolayers alpha-PGMG/alpha-PGBG and beta-PGMG/beta-PBBA showed bidimensional miscibility both for alpha-alpha and beta-beta mixtures.For the alpha-alpha system, attractive interactions among the polypeptide alphahelices were found (G_mix<0) and the driving factor appeared to be the entropic one (packing). Compressibility moduli and surface potential measurements showed a fluidification effect of alpha-PGBG on mixed monolayers. In the case of beta-beta mixed monolayers, ideal behaviour was observed and no fluidification effect detected.Scanning electron micrographs made on collapsed monolayers showed hexagonal structures for alpha-alpha mixtures and no well-defined or characterized features for the beta-beta system.     

Polymeric amphiphiles with hydrophilic main chain spacers: Studies in monolayers and Langmuir-Blodgett multilayers

A methacrylic lipid was polymerized to form an amphiphilic homopolymer and random copolymers with various levels of acrylic acid comonomers. The behavior of these polymeric lipids was investigated in monolayers at the air-water interface and in Langmuir-Blodgett multilayers on polymer foil supports. The acrylic acid acts as a hydrophilic spacer along the polymer backbone, and improves the ability of the polymer to self-organize into highly ordered monolayers and ultimately LB multilayers. It is shown that the quality and stability of the multilayers increase substantially with the increase in comonomer content.     

Interaction of polysilicic acid with monolayers of substances containing quaternary ammonium groups

The action of polysilicic acid on monolayers of a quaternary ammonium salt and a phospholipid spread on substrates of various pH values was studied. The films of benzyl dimethyl hexadecyl ammonium chloride were considerably affected above pH 2. No interaction was observed, at any pH, between silicic acid and dipalmitoyl phosphatidyl serine.The results support the existence of ionic interactions between dissociated silanol groups and tetra-alkylammonium groups. The involvement of hydrogen bonds is ruled out.     

Polypeptides mixed monolayers: collapse mechanism

The mechanism of the collapse process of monolayers of poly-L-alanine and of its mixtures with poly--methyl-L-glutamate was studied at the water/air interface at temperatures of 15°, 20°, 25°, and 30 °C.From measurements of the collapse surface pressure as a function of molar ratios and from the determination of the collapse kinetics, as well as from ellipsometrical measurements of the thickness of the film, the complete solubility of the components, even in the collapsed phase, was deduced.Furthermore, activation energies and values ofG*,H*, andS* in relationship to the kinetics of this process were deduced; it was shown that this process is constituted of a first phase of nucleation and of a second phase of growth both for the poly-L-alanine alone and for its mixtures with poly--methyl-L-glutamate.     

Catalase monolayers at the air/water interface I. Reversibilities and irreversibilities

/A-isotherms of catalase monolayers established at the air/water-interface are discussed quantitatively on the basis of molecular data: A relationship between a critical value of the surface pressure, the corresponding molecular area, and the molecular dimension of the molecules at the interface is proposed. It is shown that the unfolding of molecules at the water surface is pH-dependent. For each pH-value there is a distinct degree of unfolding; the molecules keep their globular state at neutral pH. Establishment at the surface of bulk solutions corresponding to globular and partly unfolded states, respectively, catalase molecules keep their original configuration on changing the pH-value of bulk-phase. The monolayers are confirmed to show reversibility with regard to lateral changes of state as well as irreversibility with respect to desorption of molecules.A model is proposed to explain the nature of the critical/A-value occurring in the/A-isotherms: on compression beyond _c, molecular segments are transferred from the surface into the bulkphase via a subsurface layer. From the experiments it is concluded that the surface pressure is determined, not only by the surface itself, but also by this subsurface layer.     

Surfactant monolayers on a clean mercury surface: Apparatus and experiments

A Langmuir trough for studying monolayers on a mercury surface was constructed usingT. Smith's design. The surfactant (long-chain alkyl-trimethylammonium compounds) in aqueous solution were spread on a clean mercury surface in an atmosphere of helium, and the surface pressure re-areaA and thickness of surface filmd-areaA curves were obtained. The-A curves were characterized by the appearance of multiple inflection points and plateaus, being explained as stepwise dense surface packing of molecules, and the formation of multilayers by film compression with long axes of molecules lying flat on the mercury surface.     

Mixed monolayers composed of PC/PS/Chol. Interaction with opioid molecules

The miscibility of phosphatidylserine, phosphatidylcholine, and cholesterol in monolayers were studied. The influence of sodium and calcium ions in this system was determined. The compression isotherms of mixed monolayers of the above cited three components spread on subphases containing opiate molecules are elucidated. Moreover, the penetration kinetics of opiate molecules in these mixed monolayers was also recorded. The results show that the presence of cholesterol always lowers the penetration of opioid molecules; this effect is weaken for meperidine, the most hydrophobic of the molecules assayed.Abreviations PS phosphatidylserine - PC phosphatidylcholine - PI phosphatidylinositol - Chol cholesterol     

A monolayer model of the interfacial region of microemulsions

Mixed monolayers of tetradecanol and oleic acid at the water-air interface were studied to provide a static related structure featuring the interface between water and oil of water-dodecane microemulsions.The films of pure components as a function of temperature show a strong area contraction between 25 ° and 30 °C, caused by a change in the head groups hydration. This agrees with similar discontinuities found for some properties of the microemulsion in the same temperature range. At the water-air interface, the composition range of tetradecanol/oleic acid mixtures with the highest thermodynamic stability corresponds to the same stability range of the water-in -dodecane-potassium oleate microemulsions.Adsorption isotherms of tetradecanol and hexanol at the dodecane-water interface were studied to compare the surface behaviour of the two alcohols; the results indicate that the two alcohols have very similar two-dimensional surface phases and adsorption energies.     

Lipolysis of didecanoyl-lecithin/triolein mixed monolayers by phospholipaseA 2

A study of enzyme lipolysis by pancreatic phospholipaseA ₂ and by vipera berus phospholipaseA ₂ on monomolecular mixed films of didecanoyl-lecithin and triolein on an aqueous subphase of pH 8 has been carried out. The influence of the composition of the mixed film, the surface pressure of the film and the amount and type of the injected enzyme on the lipolysis rate were studied.In order to relate the lipolytic activity with the monolayer state, the compression isotherms of the didecanoyl-lecithin/triolein mixed monolayers have also been obtained.The resuls are compared to observations on lipolytic activity of phospholipaseA ₂ on the didecanoyl-lecithin/cholesterol mixed monolayers. Triolein improves the kinetic conditions of the lipolysis of lecithin films in a higher degree than cholesterol. Probably it increases the enzyme penetration by the fluidifying effect exerted on the lecithin monolayers.     

Orientation,recognition, and photoreaction of nucleolipids in model membranes

Amphiphiles with nucleobases and nucleosides as headgroups have been synthesized. Their surface behavior was investigated in monolayers at the air/water interface. The double chain nucleolipids form stable monolayers with nearly identical surface pressure-area diagrams, whereas the spreading behavior of the mono chain amphiphiles is dominated by the various nucleobase-headgroups. When measuring the interactions between nucleolipid monolayers and nucleobases (monomeric and polymeric ones), specific base-base effects could be observed: the complementary nucleobases solubilized in the subphase expand the monolayer more than the non-complementary ones. Photodimerization reactions of thymine-amphiphiles were investigated in mono- and multilayers as well as in spin-coated films.     

Properties of mixed monomolecular films of poly(benzyl-methacrylate) and arachidic acid

Binary mixed monomolecular films of poly(benzyl-methacrylate) and arachidic acid at the water/air interface have been studied with respect to compatibility and stability. The surface pressure — area isotherms indicate compatibility of the two components. However, the miscible state is unstable at high surface pressures. This is demonstrated by the constant pressure relaxation of the mixtures. There is a mechanism of separation and nucleation of the arachidic acid from the film for mixtures with high polymer content at a surface pressure of 30 mN/m. For lower concentrations of polymer in the mixtures and at a surface pressure of 20 mN/m the fatty acid is stabilized by the polymer.     

Microstructure and lateral diffusion in monolayers of polymerizable amphiphiles

Lipid analogue amphiphilic molecules containing polymerizable units were investigated in monolayers at the air/water interface by using film balance measurements, fluorescence microscopy, and photobleaching techniques. The polymerizable groups (diene-, diyne-, and methacrylate units) were introduced into the hydrophobic alkyl chains or into the polar head of the amphiphilic molecules.In the case of the diene- and diyne-containing compounds the polymerizable units are incorporated into the hydrophobic alkyl chains, enabling them to form a two-dimensional network. Due to the free chain flexibility of the monomers the lateral mobility was comparable to that of saturated lipid analogues and decreases upon polymerization proportionally to the dose of UV irradiation. In addition, fluid/solid phase transitions of compounds with polymerizable groups in the hydrophobic part tend to vanish during the formation of the polymers. However, the direct observation of the growth of polymeric crystalline domains can be followed by using diacetylene lipid analogues.In the case of the methacrylate derivatives the polymerizable unit was coupled to the polar part via a flexible spacer. For these systems the characteristics of the monomeric phase transition are retained after polymerization. However, it shows a significant, strong decrease of the in-plane mobility already in the fluid-expanded phase of the polymer. The quantitative measurements of the lateral diffusion in the monolayers can be correlated with fluorescence microscopic images of their structure.     

An absolute differential maximum bubble pressure surface tensiometer employing displaced capillaries

A modification of the differential maximum bubble pressure method for determining surface tensions is described. In this method, surface tension is calculated from the difference between maximum bubble pressures reached at capillaries of differing internal radii, vertically displaced by an amount calculated from the theory of Cuny and Wolf (1956) Ann Physik 17:57). The density dependence of the technique is eliminated and surface tension becomes a truly linear function of the differential maximum bubble pressure, which is easily measured. The absolute measuring technique is illustrated for equilibrium and dynamic surface tensions of a series of pure liquids and aqueous solutions.For dynamic measurements on surfactant solutions some important experimental considerations and limitations are described. In particular, a previously unrecognized source of error in estimating bubble surface ages is identified. It was found that the maximum bubble pressure for a large capillary does not immediately precede the detachment of the bubble, but occurs at one-third the overall bubble period. Thus, for large capillaries, subsequent to attaining the maximum bubble pressure, there exists a significant decay time in addition to the dead time. In general, surface ages corresponding to maximum pressure at small and large capillaries bubbling with the same period are not equal. This can lead to a large error in dynamic and equilibrium surface tensions of surfactant solutions. With suitable correction the technique is capable of measuring absolute surface tension, even for quite slowly equilibrating surfactant solutions.     

Effect of polymerized silicic acid on mixed lipid-protein monolayers used as cell-membrane models II. Pepsin-sphingomyelin films

Mixed pepsin-sphingomyelin films exhibit behavior typical of bidimensional systems whose components are miscible in all proportions. The non-polar chains of their components are believed to establish weak hydrophobic interactions. The dynamic compression-expansion II-A curves obtained in the presence of polysilicic acid differ from those recorded in its absence, which may arise from an ionic interaction whereby silicate ions accommodate themselves among the film molecules and bind strongly to the sphingomyelin molecules to form a rigid surface network in which the protein molecules are trapped.