硒功能化杯芳烃载体银离子选择性膜电极的研究

合成6个硒功能化杯芳烃为载体,采用双层夹心膜电位法直接测定了溶剂聚合物膜中载体与金属离子生成的络合物生成常数。制备并考察了以硒功能化杯芳烃为载体的银离子选择性电极的性能,发现以载体6为银离子选择性电子的载体,制成的膜电极,用作Ag^ 电位滴定Cl^-的指示电极,效果最佳。     

对叔丁基杯[6]芳烃稀土配合物的合成及荧光性能研究

合成了以对叔丁基[6]芳烃(H6L)及DMF为配体,单一稀土RE3+(sm3+,Dy3+,Tb3+)及混合稀土Tb3+:(Ln3+(Ln3+=Gd3+,Y3+)为中心的5种稀土配合物.对其进行了元素分析、摩尔电导、红外光谱、差热分析、紫外光谱、核磁共振氢谱及荧光性能研究.荧光光谱的测试表明:Tb3+及其掺杂配合物具有较强的特征荧光,荧光惰性离子(Gd3+,Y3+)对Tb3+的荧光有增强作用,其中Y3+的敏化效果明显.     

超分子自组装合成杯[4]芳烃黄原酸镍(Ⅱ)配合物

利用二维和三维的大环及笼状主体分子与金属离子直接进行自组装反应合成新型有机无机杂化分子是当前超分子领域的研究热点之一。这类分子不仅具有新奇的光、电、磁等特性，而且还可作为新型的主体分子在客体识别、催化、吸附与分离等方面有广阔的应用前景。杯芳烃是有机超分子领域广受     

Eu3+-四取代杯[4]芳烃酰乙醇胺配合物的合成及其荧光性能

设计并合成了四取代杯[4]芳烃酰乙醇胺及其Eu3 配合物(3),其结构经UV-vis,1H NMR,IR,Ms和元素分析表征.3表现出良好的Eu3 特征荧光.     

水溶性杯[4]芳烃衍生物与稀土铽[Ⅲ]离子形成配合物的荧光行为

近年来 ,杯芳烃衍生物与稀土离子配合物的发光因在荧光免疫分析和发光材料的开发上具有潜在的应用价值而引起了人们极大的兴趣 [1～ 3] .人们已经合成了一系列带有羧基、吡啶和羰基等官能团的杯 [4]芳烃衍生物 ,并在非水溶剂中能敏化稀土离子发光 ,但在水溶液中效果并不理想 [4～ 7] .本文报道Scheme1　 The structure of calix[4]arenesulfonate水溶性杯 [4]芳烃衍生物与稀土铽 [ ]离子形成配合物的荧光行为 .结果表明 ,乙酸修饰的磺化杯 [4]芳烃 L2 在水溶液中不仅能对 Tb3+进行有效的能量传递 ,形成高效的能量传递发光体系 ,而且也能与…     

杯芳烃磷酸酯为载体铅离子选择性膜电极的研究

1引言研制中性载体PVC膜离子选择电极,关键是设计及选择合适的载体。杯芳烃衍生物作为高选择性载体已成功地用于离子选择电极上。本研究合成了两种新的对-叔丁基杯[4]芳烃磷酸酯类衍生物,以此化合物为载体制备了两种铅离子选择性膜电极,并对电极的性能进行了研究。2实验部分2.1     

杯[4]芳烃二肟酸-Cu(Ⅰ)配合物的设计与自组装合成

Cu是许多酶中的必须元素[1],Cu与有机配体形成的配合物不仅具有氧化、还原、催化、超分子化合物结构控制等重要作用,而且具有抗菌、抗癌、抗病毒等生物活性.     

以两种杯[4]芳烃衍生物为载体的PVC膜季铵盐正离子选择电极的研究

研究了两种新型杯[4]芳烃衍生物5，ll，17，23-四叔丁基-25，26，27，28-四-[3．(甲氧基羰基)苄氧基]杯[4]芳烃(I)和5，ll，17，23-四叔丁基-25，26，27，28-四-[3-(乙氧基羰基)苄氧基]杯[4]芳烃(Ⅱ)为载体的PVC膜电极的响应行为；实验结果表明，两电极对季铵盐正离子均具有优良的能斯特电位响应性能，以(I)为载体的电极对Bu4N^ 、Et4N^ 和Me4N^ 的线性响应范围分别为10^-6～10^-1mol／L、10^-6～10^-1mol／L和10^-4～10^-1mol／L，相应的斜率为59．2、55．0和55．9mV／pc；以(Ⅱ)为载体的电极对Bu4N^ 、Et4N^ 和Me4N^ 的线性响应范围分别为10^-6～10^-1mol/L，10^-5～10^-1mol/L和10^-4～10^-1mol／L，相应的斜率为59．8、56．6和56．0mV／pc；电极具有读数稳定，重复性好，可在pH值较宽范围内测定等优点；将该电极用于药品溴丙胺太林中丙胺太林含量的测定，所得结果与药典法基本一致。     

对叔丁基-杯[8]芳烃膜修饰电极的电化学性质研究

本文报道对叔丁基-杯[8]芳烃膜修饰电极的电化学性质,目的在于利用杯芳烃特殊的空腔结构对靶向物质具有定向选择功能。将该膜修饰电极用于分离用一般伏安方法不能分辩的物质如手性分子、同分异构体、电化学性质相近的物质等,从而拓宽了伏安分析领域。利用多种电化学手段研究了该膜修饰电极的电化学性质,求得了电极过程动力学参数。本文报道对叔丁基-杯[8]芳烃修饰电极膜的电化学性质。     

硫酰杯[4]芳烃羧酸类衍生物及其配合物的合成、晶体结构与表征

合成了5,11,17,23-四叔丁基-25,26,27-三[(乙酯基)甲氧基]-2,8,14,20-四硫酰杯[4]芳烃(L1)和5,11,17,23-四叔丁基-25,26,27-三(氧基乙酸)-2,8,14,20-四硫酰杯[4]芳烃(L2)及L2的稀土配合物, 采用元素分析、紫外光谱、红外光谱和1H NMR对其结构进行了表征. 用SMART 1000 CCD X射线衍射仪测定了L1的晶体结构. 结果表明, L1组成为: C52H65KO18S4·0.5H2O, 属三斜晶系, P1空间群, 晶胞参数a=1.2607(6) nm, b=1.5820(8) nm, c=1.6480(8) nm; α=83.720(8)°, β=69.327(8)°, γ=79.342(9)°, Z=2, V=3.019(3) nm3, Dc=1.270 g/cm3, F(000)=1218, μ=0.293 mm-1, R1=0.0937, wR2=0.2580. 杯芳烃分子采取部分锥式构象.     

An Interesting Approach to Bis-calix[5]arene Analogue from Calix[6]arene

Calix [n] arenas {n = 4, 6 or 8} are easily prepared from formaldehyde and para-substituted phenols via cyclic condensation under alkaline conditions in one step. It is not surprising that the calyx [n] arene (n = 4, 6, 8) chemistry has been developing very rapidly during the latest 20 years1. However, it is not the case for calixarenes with odd benzene rings (for example, n = 5). The yield of p-tert-butylcalix [5] arene synthesized in one-step from p-tert-butylphenol and formaldehyde was a…     

Salicylate Ion‐Selective Electrode Based on a Calix[4]arene as Ionophore

A salicylate‐selective electrode based on calix[4]arene derivative was developed and its response characteristics were investigated. The optimum membrane composition was 1 % ionophore, 30 % PVC, 69 % DOS. The electrode exhibited a Nernstian slope of 58.8±0.5 mV/pSal in the range of 1.0×10^?5–1.0×10^?1 M with a detection limit of 4.3×10^?6 M at pH 4.0, 20±1 °C. The potentiometric response of the electrode in the presence of different anions was investigated by the separate solution method. The lifetime was found at least 4 months, and its response time was 5–10 s. It was successfully used for the potentiometric determination of salicylate in pharmaceutical preparations.     

Silver(I)‐Selective PVC Membrane Potentiometric Sensor Based on a Recently Synthesized Calix[4]arene

A new PVC membrane potentiometric sensor for Ag(I) ion based on a recently synthesized calix[4]arene compound of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐dihydroxy‐calix[4]arene‐thiacrown‐4 is developed. The electrode exhibits a Nernstian response for Ag(I) ions over a wide concentration range (1.0×10^?2?1.0×10^?6 M) with a slope of 53.8±1.6 mV per decade. It has a relatively fast response time (5–10 s) and can be used for at least 2 months without any considerable divergence in potentials. The proposed electrode shows high selectivity towards Ag⁺ ions over Pb²⁺, Cd²⁺, Co²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Sr²⁺, Mg²⁺, Ca²⁺, Li⁺, K⁺, Na⁺, NH₄⁺ ions and can be used in a pH range of 2–6. Only interference of Hg²⁺ is found. It is successfully used as an indicator electrode in potentiometric titration of a mixture of chloride, bromide and iodide ions.     

Complex Formation of Some Tetraamido-type Calix[4]arene Derivatives Detected by Vibrational Spectroscopy

Abstract

Dibenzo-14-crown-4 alcohols are shown to aggregate in chloroform by the formation of hydrogen-bonded dimers. Structural variations between crown ether alcohols significantly affect the degree of dimerization. This self-association is of relevance for understanding the complexation and extractive properties of these and related macrocycles.     

Exploration of Pb2+ Selective Behavior of Calix[6]arene Ester Derivative

The selective behavior of calix[n]arene ester derivatives in two-phase extraction systems using polarographic technique has been investigated. Calix[4]arene tetraester derivative shows remarkable Na⁺ over Pb²⁺ selectivity; whereas calix[6]arene hexaester derivative shows Pb²⁺ over Na⁺ selectivity. The interference of some selected cations (Na⁺, K⁺, Cu²⁺ and Mg²⁺) were also examined and no significant effect on the selectivity behavior as well as extraction ability of these ionophores was found except Na⁺. The study reveals for the first time that the calix[6]arene hexaester derivative is highly Pb²⁺ selective ionophore and can be employed in the field of sensor as well as separation science and technology. The work also highlights the usefulness of polarographic technique in trace metal determination.     

Regioselective Bridging Calix[6]arenes: Synthesis and X-ray Structure of Trisbridged Calix[6]arene

The preparation and characterization of gold nanoparticles (～6 nm in diameter) modified with mono-6-thio-β-cyclodextrin (II) is described. The resulting monolayer-protected gold nanoparticles are water-soluble and more stable. The concentration of II plays a crucial role for the distribution of the modified nanoparticles. When the ratio of concentration of II to HAuCl₄,[II]/[HAuCl₄] ≥ 0.93, a stable gold nanoparticle with uniform distribution and diameter of 6.0 ± 0.9 nm will be obtained. The recognition of modified gold nanoparticles to organic guest molecule is researched. The modified gold nanoparticles can make the electrochemical reduction current of nitrobenzene decrease and can be self-assembled in three-dimensional to form spherical clusters with ligand of methylene green.     

基于C3v对称性的杯[6]芳烃对Hg2+的荧光选择性识别

合成了一系列具有C3v对称性、下缘分别利用Se、Te和S杂原子连接蒽环发光基团的杯[6]芳烃衍生物1-3.通过紫外-可见光谱和荧光光谱研究了它们对各种碱金属离子和过渡态金属离子的化学传感识别行为. 结果表明,含有Se杂原子的主体1在CH2Cl2溶液中对Hg2+表现出良好的选择性. 并且,通过肉眼可以直接观察到溶液颜色由无色变为黄色.通过荧光光谱的连续滴定实验,主体1-Hg2+体系的稳定常数可达（1.12 ? 0.08) ? 105 M-1. 因此,化合物1有望成为一种用于检测Hg2+的新型化学传感器.     

Synthesis and Absorption Properties of Calix[6]amides—based Polymers

Reacting calix[6]arene hexaesters with poly(ethyleneimine),a series of calix[6]amidesbased polymers were obtained for the first time.It is found that they show high absorption capacities towards soft cations comparing to hard cations,and the absorption abilities enhanced with the increasing of calixarene content,which may indicates the cavity of calixarene plays crucial role in absorption.Polymer 2c shows good selective absorption capability towards Ag^ among the tested cations.     

Synthesis of Flavin–Calix[4]arene Conjugate Derivatives

The synthesis of two new flavin substituted calix[4]arene derivatives, 9 and 10 , is described. The first flavin substituted calix[4]arene derivative 9 was synthesized by the reaction of 3‐methylalloxazine ( 5 ) with 25,27‐bis(3‐bromopropoxy)‐26,28‐dihydroxy‐5,11,17,23‐tetra(tert‐butyl)calix[4]arene ( 4 ) in high yield (92%). The other derivative 10 was prepared from 3‐methylalloxazine‐1‐acetic acid ( 7 ) and 25,27‐bis(3‐cyanopropoxy)calix[4]arene ( 3 ). All new compounds were characterized by a combination of FT‐IR and ¹H‐NMR spectroscopy, and elemental‐analysis techniques.     

Calix[4]arene stabilized Transition Metal Imido Complexes

The usage of calix[n]arenes as ancillary poly(phenolate) ligands is a rapidly developing area in coordination chemistry. This article focuses on the synthesis, structure and reactivity of calix[4]arene‐ and calix[4]arene ether‐stabilized imido complexes of group 4 — 6 transition metals as well as on the comparison of calix[4]arene dialkyl ethers in particular with other widely employed related ligand systems such as salenes, porphyrins and tetraazaannulenes. Contrary to these nitrogen containing systems, it is much easier to control the charge of the ligand system through the degree of alkylation of the calixarene's lower rim without a major change in the geometry of the resulting metal complex. This could lead to isoelectronic and structurally closely related transition metal complex fragments for metals in neighboring groups of the periodic table or for metals in different oxidation states. The “intrinsic” reactivity of metal imido linkages might therefore be explored using calix[4]arenes and calix[4]arene ethers and first results are summarized in this research report.