TiO<Subscript>2</Subscript> Photocatalytic Oxidation: II. Gas-Phase Processes

The results of studies on the TiO₂ photocatalytic oxidation of model air pollutants are summarized. The kinetics of photocatalytic oxidation of CO and the vapors of a number of simple organic substances was studied in detail. It was found that, in the course of reaction, all of the test substances underwent complete mineralization. Gaseous substrates were converted with the participation of several types of reaction centers. The photocatalytic oxidation of sulfur- and phosphorus-containing substances resulted in gradual deactivation of the photocatalyst; however, its activity can be restored by washing the photocatalyst with water. It was found that, along with oxidation, the steps of hydrolysis play an important role in the photocatalytic degradation of air pollutants, such as dimethyl methylphosphonate and 2-chloroethyl sulfide.__________Translated from Kinetika i Kataliz, Vol. 46, No. 3, 2005, pp. 450–465.Original Russian Text Copyright © 2005 by Vorontsov, Kozlov, Smirniotis, Parmon.     

TiO<Subscript>2</Subscript> photocatalytic oxidation: I. Photocatalysts for liquid-phase and gas-phase processes and the photocatalytic degradation of chemical warfare agent simulants in a liquid phase

The results of studies on the effect of the preparation procedure on the properties of TiO₂-based photocatalysts and the kinetics and mechanism of the photocatalytic oxidation of organic water pollutants are surveyed. The effects of calcination temperature, surface modification with platinum, and acid-base treatment of the surface of titanium dioxide on its activity in model gas-phase and liquid-phase reactions are considered. Optimal catalyst preparation conditions were found in order to achieve maximum activity, and conceivable reasons for the effects of the above factors on the activity were revealed. The intermediate products and mechanisms of the photocatalytic and dark reactions of solutes that simulated chemical warfare agents in water are considered. All of the test simulants can undergo complete oxidation to form inorganic products in an aqueous TiO₂ suspension under irradiation with UV light. It was found that, in addition to oxidation, the dark steps of hydrolysis also play an important role in the degradation of these substances. The low-frequency ultrasonic treatment (20 kHz) of a photocatalyst suspension in the course of the photocatalytic oxidation of dimethyl methylphosphonate can accelerate the reaction because of the facilitated transport of reactants to the surface of photocatalyst particles.__________Translated from Kinetika i Kataliz, Vol. 46, No. 2, 2005, pp. 203–218.Original Russian Text Copyright © 2005 by Vorontsov, Kozlov, Smirniotis, Parmon.     

Photocatalytic intercalated material based on HLaNb<Subscript>2</Subscript>O<Subscript>7</Subscript> as host and Cd<Subscript>0.8</Subscript>Zn<Subscript>0.2</Subscript>S as guest

A novel photocatalytic material (Pt,Cd0.8Zn0.2S)/HLaNb2O7 was fabricated by successive intercalation and exchange reactions. The (Pt,Cd0.8Zn0.2S)/HLaNb2O7 possessed a gallery height less than 0.5 nm and showed a broad absorption with wavelength over 370-500 nm. Using (Pt,Cd0.8Zn0.2S)/HLaNb2O7 as catalyst, the photocatalytic H2 evolution was more than 160 cm3·h-1·g-1 in the presence of Na2S as a sacrificial agent under irradiation with wavelength more than 290 nm from a 100-W mercury lamp. Furthermore, the catalyst showed photocatalytic activity even under visible light irradiation.     

Development of TiO<Subscript>2</Subscript> photocatalysts suitable for practical use and their applications in environmental cleanup

Recently, environmental disruption is proceeding on a global scale through the consumption of huge amounts of fossil fuels and the emission of various chemical substances. However, these substances resist bio-treatment. TiO₂ generates electrons and holes by irradiation with light. Most organic micro-pollutants, including dioxins, are decomposed into carbon dioxide and water by the effect of the holes with high oxidative potential. By using such a photocatalytic reaction, various applications are feasible for environmental cleanup. In general, TiO₂ powder has been utilized as photocatalyst, although TiO₂ powder photocatalyst has several disadvantages: (1) it is difficult to handle, (2) photocatalytic reaction is slow and it takes a lot of time for treatment and (3) it is difficult to apply to plastics and textiles, because the photocatalyst decomposes them. We have developed a photocatalyst suitable for practical use and have developed high-activity photocatalysts such as TiO₂ photocatalytic transparent film, photocatalytic silica-gel, apatite-coated TiO₂ photocatalyst usable for plastics and textiles, photocatalytic paper, photocatalytic blue charcoal and photocatalytic oxygen scavenger. The application of these high-activity photocatalysts has been studied in deodorization, anti-bacterial, self-cleaning, anti-stain, water treatment, air purification such as photocatalytic decomposition of dioxins and VOC, and NO _x removal. Now various photocatalytic articles using these new photocatalyst materials are on the market in Japan. Photocatalytic technology can create many valuable products for environmental use all over the world.     

Preparation of TiO<Subscript>2</Subscript> nanofibers immobilized on quartz substrate by electrospinning for photocatalytic degradation of ranitidine

The photocatalytic activity of TiO₂ nanofibers immobilized on quartz substrates was investigated by evaluating the decomposition of organic pollutants. TiO₂ nanofibers were synthesized by electrospinning the Ti-precursor/polymer mixture solution, followed by hot-pressing for enhancing the adhesion of TiO₂-nanofiber films to the substrates. TiO₂ started to crystalize in the anatase form at 500 °C and reached the optimal photocatalytic anatase/rutile phase ratio of 70:30 at a calcination temperature of 600 °C. The TiO₂-nanofiber film was demonstrated to be an efficient photocatalyst by ranitidine decomposition under UV illumination and was proven to have a comparable photocatalytic activity with the well-known Degussa P25 nanoparticulate photocatalyst and excellent recyclability during 10 cycles of photocatalytic operation, indicating no loss of TiO₂ nanofibers during photocatalytic operations.     

Structural characterization and photocatalytic properties of novel Bi<Subscript>2</Subscript>FeVO<Subscript>7</Subscript>

Bi₂FeVO₇ was prepared by a solid-state reaction technique for the first time and the structural and photocatalytic properties of Bi₂FeVO₇ were studied. The results shows that this compound crystallized in the tetragonal crystal system with space group I4/mmm. Moreover, the band gap of Bi₂FeVO₇ was estimated to be about 2.22(6) eV. For the photocatalytic water splitting reaction, H₂ or O₂ evolution was observed from pure water with Bi₂FeVO₇ as the photocatalyst by ultraviolet light irradiation. Degradation of aqueous methylene blue (MB) dye by photocatalytic way over this compound was further studied under visible light irradiation. Bi₂FeVO₇ shows higher catalytic activity compared to TiO₂ (P-25) for MB photocatalytic degradation under visible light irradiation. Complete removal of aqueous MB was realized after visible light irradiation for 170 min with Bi₂FeVO₇ as the photocatalyst. The reduction of the total organic carbon (TOC) and the formation of inorganic products, SO ₄ ²⁻ and NO ₃ ⁻ revealed the continuous mineralization of aqueous MB during the photocatalytic course.     

Preparation and characterization of highly photoactive nanocrystalline TiO<Subscript>2</Subscript> powders by solvent evaporationinduced crystallization method

Highly photoactive bi-phase nanocrystalline TiO₂ photocatalyst was prepared by a solvent evaporation-induced crystallization (SEIC) method, and calcined at different temperatures. The obtained TiO₂ photocatalyst was characterized with X-ray diffraction (XRD), transmission electron microscopy (TEM) and BET surface areas. The photocatalytic activity was evaluated by the photocatalytic oxidation of acetone in air. The results show that solvent evaporation can promote the crystallization and phase transformation of TiO₂ at 100°C. When calcination temperatures are below 600°C, the prepared TiO₂ powders show bimodal pore size distributions in the mesoporous region. At 700°C, the pore size distributions exhibit monomodal distribution of the inter-aggregated pores due to the collapse of the intra-aggregated pores. At 100°C, the obtained TiO₂ photocatalyst by this method shows good photocatalytic activity, and at 400°C, its photocatalytic activity exceeds that of Degussa P25. This may be attributed to the fact that the prepared TiO₂ photocatalyst has higher specific surface areas, smaller crystallite size and bimodal pore size distribution.     

Optimized photocatalytic degradation of pefloxacin by TiO<Subscript>2</Subscript>/UV process

The photocatalytic degradation of pefloxacin was studied using modified TiO₂ as a photocatalyst. The effect of various parameters such as the amount of the photocatalyst, the initial concentration of pefloxacin, initial pH value on the process were investigated, and the optimal conditions were determined. The optimal amount of the photocatalyst is 0.3 g/L. The photodegradation rate of pefloxacin decreases with the increase of initial concentration. Alkaline medium is favorable for the photocatalytic degradation process. The primary photo-degradation products were analyzed by HPLC-ESI-MS/MS and thus the process mechanism was discussed.     

Vanadium-containing polyphosphomolybdate immobilized on TiO<Subscript>2</Subscript> nanoparticles: A recoverable and efficient catalyst for Photochemical,Sonochemical and photosonochemical degradation of dyes under irradiation of UV light

A new photocatalyst, nanoporous anatase TiO₂ crystalline particles coupled by Na₅PV₂Mo₁₀O₄₀ Keggin units, TiO₂-PVMo, was prepared by combination of the methods of sol-gel and hydrothermal treatment. The catalyst was characterized by X-ray diffraction (XRD), UV diffuse reflectance spectroscopy (UV-DRS), FT-IR spectroscopy, Scanning Electron Microscopy (SEM) and cyclovoltametery (CV). This photocatalyst exhibited a good photocatalytic (UV region) and sonocatalytic activity in the decomposition of different dyes in aqueous systems. The TiO₂-PVMo composite showed higher photocatalytic and sonocatalytic activity than pure polyoxometalate or pure TiO₂.     

Assessment of operating parameters for photocatalytic degradation of a textile dye by Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiO<Subscript>2</Subscript>/clinoptilolite nanocatalyst using Taguchi experimental design

In the current study, a nanophotocatalyst doped with of TiO₂ and Fe₂O₃ nanoparticles supported on Iranian clinoptilolite was synthesized and characterized by XRD, XRF, SEM, and EDX analyses. The results suggested the successful loading of TiO₂ and Fe₂O₃ nanoparticles onto the surface of clinoptilolite. The SEM images confirmed the average size of nanoparticles deposited on zeolite, which was about 20–40 nm. Furthermore, application of the synthesized photocatalyst in photocatalytic degradation of Acid Black 172 dye was studied using the Taguchi method and the chosen parameters were as follows: pH (2–7), dye concentration (50–200 mg/l), irradiation time (30–120 min), and catalyst dosage (0.5–1.5 g/l). The results indicate that dye concentration, pH, and irradiation time are respectively the most effective factors in these experiments while with the minimum dosage of the catalyst (0.5 g/l), up to 90 % removal efficiency could be achieved. The optimum value for each parameter was pH = 2, dye concentration = 50 mg/l, catalyst dosage = 1 g/l and irradiation time = 60 min, and the dye removal efficiency reached up to 100 % at these optimal conditions. Furthermore, after five-times recycling and reusing the catalyst, the efficiency of the photocatalytic degradation was reduced from 91.5 to 65.9 %, which is still an acceptable value.     

Selective solar photocatalytic oxidation of ethylbenzene on C,N, and S doped TiO<Subscript>2</Subscript>

The liquid-phase photo-oxidation of ethylbenzene (EB) is investigated in solar light with air/O₂/N₂ at atmospheric pressure, in a batch reactor using acetonitrile medium. It is carried out over TiO₂ doped with C, N, and S (TCNS) photocatalyst samples. The photocatalytic oxidation yielded acetophenone (33%) and 1-phenylethanol (21%) at 56% conversion of EB during a 6-h irradiation time. This product distribution indicates that C–H bond activation has occurred only at the alkyl chain. The effects of the EB to water content ratio, amount of photocatalyst and its sustainability, pH, have been studied. It is illustrated that the reaction carried out by this environmentally friendly photocatalysis is truly heterogeneous under mild conditions using solar light and no waste generation. An optimum loading of TCNS5 was observed for the photo-oxidation of EB.     

Photocatalytic removal of nitrogen oxides from air on TiO<Subscript>2</Subscript> modified with bases and platinum

The efficiency of TiO₂ (Degussa P-25) modified with an alkaline admixture (urea, BaO), sulfuric acid, or platinum in the photocatalytic oxidation of NO (50 ppm) with a flowing 7% O₂ + N₂ mixture under UV irradiation in a flow reactor at room temperature and atmospheric pressure is reported. Because of the progressive blocking of active sites of the photocatalyst by the reaction products (NO₂, NO₃⁻), it is impossible to realize prolonged continuous removal of NO _x (NO + NO₂) from air without catalyst regeneration at elevated temperatures. The efficiency of the photocatalysts is characterized by specific photoadsorption capacity (SPC) calculated from the total amount of NO _x adsorbed during 2-h-long irradiation. Modification of TiO₂ with 5% BaO or 5% urea raises the SPC of the catalyst by a factor of 2–3. Presumably, this promoting effect is due to the basic properties of these dopants, which readily sorb NO₂ and NO₃⁻. A considerable favorable effect on SPC is also attained by adding 0.5% Pt to (5% BaO)/TiO₂. The SPC of the (0.5% Pt)/TiO₂ catalyst depends on the state of the platinum. The samples calcined in air at 500°C, which contain Pt⁺ and Pt²⁺, have an approximately 2 times higher SPC than unpromoted TiO₂ and ensure a much larger NO₂/NO ratio at the reactor outlet. Conversely, the samples reduced in an H₂ atmosphere at 200°C, whose platinum is in the Pt0 state, show a lower SPC than the initial TiO₂ and cause no significant change in the NO₂/NO ratio.     

Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>/BiFeO<Subscript>3</Subscript> heterostructure: preparation,characterization, and photocatalytic activity

Bi₂O₃/BiFeO₃ composite was successfully fabricated by a conventional sol–gel method and structural properties were characterized based on X-ray diffractometer, scanning electron microscope, transmission electron microscope, energy-dispersive X-ray analyzer, nitrogen adsorption–desorption measurement, and UV–visible diffuse reflectance spectroscopy. Bi₂O₃/BiFeO₃ had a good absorption for visible light, which was benefit to photocatalytic activity. The highest degradation efficiency was obtained when the content of Bi₂O₃ in Bi₂O₃/BiFeO₃ was 63.9%. Effect of experimental conditions was investigated, and the highest photocatalytic activity of Bi₂O₃/BiFeO₃ was observed at photocatalyst dosage of 0.5 g/L, initial BPA concentration of 10 mg/L, and solution pH of 6.3. Bi₂O₃/BiFeO₃ photocatalyst exhibited enhanced photocatalytic activity for BPA, and the reaction rate constant over Bi₂O₃/BiFeO₃ composite was 2.23, 3.65, and 8.71 times higher than that of BiFeO₃, Bi₂O₃ and commercial TiO₂ (P25), respectively. Bi₂O₃/BiFeO₃ showed high photocatalytic activity after three cycles, suggesting that it was a stable photocatalyst. The possible photocatalytic mechanism has been discussed on the basis of the theoretical calculation and the experimental results. The hydroxyl and superoxide radicals together with photogenerated holes played significant roles in the photocatalytic reaction.     

Laws of selective CO oxidation over a Ru/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst in the surface ignition regime: II. Transition states

The kinetics of selective CO oxidation (or individual CO or H₂ oxidation) over ruthenium catalysts are considerably as affected by the heat released by the reaction and specifics of the interaction of ruthenium with feed oxygen. In a reactor with reduced heat removal (a quartz reactor) under loads of ∼701 g_Cat⁻¹ h⁻¹ and reagent percentages of ∼1 vol % CO, ∼1 vol % O₂, ∼60 vol % H₂, and N₂ to the balance, the reaction can be carried out in the catalyst surface ignition regime. When catalyst temperatures are below ∼200°C, feed oxygen deactivates metallic ruthenium, the degree of deactivation being a function of temperature and treatment time. Accordingly, depending on the parameters of the experiment and the properties of the ruthenium catalyst, various scenarios of the behavior of the catalyst in selective CO oxidation are realized, including both steady and transition states: in a non-isothermal regime, a slow deactivation of the catalyst accompanied by a travel of the reaction zone through the catalyst bed along the reagent flow; activation of the catalyst; or the oscillation regime. The results of this study demonstrate that, for a strongly exothermic reaction (selective CO oxidation, or CO, or H₂ oxidation) occurring inside the catalyst bed, the specifics of the entrance of the reaction into the surface ignition regime and the effects of feed components on the catalyst activity should be taken into account.     

A study on the degradation of methamidophos in the presence of nano-TiO<Subscript>2</Subscript> catalyst doped with Re

A new Re-doped nano-TiO₂ photocatalyst was synthesized by immersion method. The novel doped nano-TiO₂ photocatalyst utilizing visible light was firstly prepared. The doped nano-TiO₂ powder was charactered by XRD, FTIR, UV-Vis, and its photocatalytic activity was tested through the photocatalytic degradation of methamidophos as a model compound under ultraviolet irradiating and in sunlight, respectively. In order to compare the photocatalytic activities, the same experiment was carried out for undoped nano-TiO₂. The degradation ratio of methamidophos in the presence of doped nano-TiO₂ reached 64.40% under sunlight for 12 h, which was 2.64% in the presence of undoped nano-TiO₂. The degradation ratio of methamidophos in the presence of doped nanoTiO₂ reached 90.39% under UV irradiationat 2.5 h, which was 51.29% in the presence of undoped nano-TiO₂. All the results show that the doped TiO₂ is a promising photocatalyst using sunlight for treating the organophosphorous pesticide wastewater. The article is published in the original.     

Possibility of using an UV–nano-TiO<Subscript>2</Subscript>–K<Subscript>2</Subscript>Cr<Subscript>2</Subscript>O<Subscript>7</Subscript> system for the determination of COD

The results of a study of the optimum oxidation conditions in the system UV?nano-Т?О₂–K₂Cr₂O₇ in a specially designed photoreactor are presented. The basic parameters of the photocatalytic oxidation of glucose and acetic acid were studied and optimized. The oxidation of organic compounds under the optimized conditions was studied. Nano-TiO₂ was shown to be a promising photocatalyst in the design of new oxidation systems for analytical purposes.     

Degradation kinetics of pollutants present in a simulated wastewater matrix using UV/TiO<Subscript>2</Subscript> photocatalysis and its microbiological toxicity assessment

Water pollution is one of the major concerns over long-term sustainability of the environment. Effective and efficient treatment of polluted wastewater is still a serious challenge for global researchers. In the last 2–3 decades, due to the incessant emergence of micropollutants in surface and ground water bodies, several endeavors have been made to resolve the water pollution issues either through chemical, physical and biological degradation processes or through removal/separation processes using different adsorbents and membranes. It has been found that most of the studies are mainly limited to single or binary pollutant analysis in a pure water matrix. Therefore, in this novel investigation, a mixture of five different pollutants has been studied for UV/TiO₂-based photocatalytic degradation. In the present study, a commercially available TiO₂, an antibiotic, i.e. Ciprofloxacin and four different synthetic dyes, i.e. Rhodamine B, Methylene Blue, Methyl Orange and Amaranth have been used as a photocatalyst, a pharmaceutical and various industrial dyes, respectively, in a batch photocatalytic reactor system with a stirrer. It is important to note that the commercial TiO₂ photocatalyst has also been characterized with the help of several characterization techniques. The present study is mainly focused on the degradation of different micropollutants present in the simulated wastewater matrix and their individual degradation kinetics. It is interesting to observe that MB and RhB have shown the maximum degradation followed by CIP (96.21, 96.15 and 89.62%, respectively). In addition, a microbiological assay has also been performed to check the toxicity variation in the degraded products. It is quite interesting to observe that the simulated wastewater matrix has completely lost its microbial toxicity within 120 min of UV/TiO₂-based photocatalytic treatment. Finally, total organic carbon evaluations of various treated samples have also been performed and the obtained results substantiate the theory of assimilable organic carbon.     

Green chemistry approach for the synthesis of PbSnO<Subscript>3</Subscript>

We report synthesis of light-induced heterogeneous photocatalyst PbSnO₃ by green chemistry approach, using mechanochemical method. The synthesized catalyst was characterized physically by various analytical investigative techniques like UV-DRS, FTIR, XRD, SEM, EDAX, TEM, and TG. The product corresponded to average particle size of 100 nm by TEM images. Photocatalytic activity of PbSnO₃ was studied by photodegradation of Methyl blue, Indigo carmine, and Acid violet dyes under sunlight. The results indicate that the sunlight stimulates a photochemical reaction and successfully complete mineralization of Methyl blue, Indigo carmine, and Acid violet dyes. Antimicrobial activity shows that PbSnO₃ photocatalyst was found non-toxic to the environment.     

Novel,Facile and Swift Technique for Synthesis of CeO<Subscript>2</Subscript> Nanocubes Immobilized on Zeolite for Removal of CR and MO Dye

CeO₂/zeolite nanocomposite was successfully prepared by the mixing-calcination method. The structural characteristics of photocatalyst were investigated by XRD, SEM, TEM and EDX. Photocatalytic degradation experiments were carried out with varying amounts of the CeO₂/zeolite, the ratio of 3:1 (CeO₂/zeolite) was exhibited excellent photocatalytic activity towards dye degradation. Synergistic effect of CeO₂/zeolite played a key role in photocatalytic degradation. The main reactive oxygen species was determined by trapping experiments. Additionally, the recyclability was tested up to the fourth cycle. The CeO₂/zeolite nanocomposite is a promising photocatalyst for removing trace and unprocessed organic contaminants in the industrial dye waste water treatment. The efficiency of CeO₂/zeolite nanocomposite offers a potential economical route to degrade organic contaminants and recovering photocatalyst simultaneously.     

Synthesis of dimethyl ether from CO and H<Subscript>2</Subscript>

Thermodynamic conditions for synthesizing dimethyl ether from synthesis gas are determined. The optimum conditions of the process are as follow: T ∼ 300°C at p = 3 MPa for two catalysts loaded into the reactor: methanol synthesis catalyst (Katalco-58) and catalyst of methanol dehydration to dimethyl ether (γ-Al₂O₃). The changes that occur with the catalysts during this process are demonstrated by electron scanning microscopy.