Which One is Bulkier: The 3,5‐Dimethylphenyl or the 2,6‐Dimethylphenyl Group? Development of Size‐Complementary Molecular and Macromolecular [2]Rotaxanes

We developed novel size‐complementary molecular and macromolecular rotaxanes using a 2,6‐dimethylphenyl terminal group as the axle‐end‐cap group in dibenzo‐24‐crown‐8‐ether (DB24C8)‐based rotaxanes, where the 2,6‐dimethylphenyl group was found to be less bulky than the 3,5‐dimethylphenyl group. A series of molecular and macromolecular [2]rotaxanes that bear a 2,6‐dimethylphenyl group as the axle‐end‐cap were synthesized using unsubstituted and fluorine‐substituted DB24C8. Base‐induced decomposition into their constituent components confirmed the occurrence of deslipping, which supports the size‐complementarity of these rotaxanes. The deslipping rate was independent of the axle length but dependent on the DB24C8 substituents. A kinetic study indicated the rate‐determining step was that in which the wheel is getting over the end‐cap group, and deslipping proceeded via a hopping‐over mechanism. Finally, the present deslipping behavior was applied to a stimulus‐degradable polymer as an example for the versatile utility of this concept in the context of stimulus‐responsive materials.     

负载型手性钯催化剂的制备和在苯乙酮不对称加氢反应中的应用

在硅烷化硅胶上涂敷手性高分子配位体三苯基氨基甲酸纤维素酯和三（３,５－二甲基苯基氨基甲酸）纤维素酯,然后与ＰｄＣｌ３配位,制备一种新型的负载型不对称加氢催化剂,该催化剂用于苯乙酮的加氢反应,醇收率最高达１００％,但产物的对遇选择性较低的原因。     

2‐[N‐(2,3‐Dimethylphenyl)carbamoyl]benzenesulfonamide and the 3,4‐ and 2,6‐dimethylphenyl analogues

The structures of 2‐[(2,3‐dimethylphenyl)carbamoyl]benzenesulfonamide, 2‐[(3,4‐dimethylphenyl)carbamoyl]benzenesulfonamide and 2‐[(2,6‐dimethylphenyl)carbamoyl]benzenesulfonamide, all C₁₅H₁₆N₂O₃S, are stabilized by extensive intra‐ and intermolecular hydrogen bonds. In all three structures, the sulfonamide and carbamoyl groups are involved in hydrogen bonding. In the 2,3‐dimethyl and 2,6‐dimethyl derivatives, dimeric units and chains of molecules are formed parallel to the c axis. In the 3,4‐dimethyl derivative, the hydrogen bonding creates tetrameric units, resulting in macrocyclic R₄⁴(22) rings that form sheets in the ab plane. The three analogues are closely related to the fenamate class of nonsteroidal anti‐inflammatory drugs.     

Synthesis of 1‐(2,6‐Dimethylphenyl)‐N‐hydroxy‐4,4‐dialkyl‐2,5‐dioxo‐N‐aryl‐3‐pyrrolidine‐carboxamides from Reaction of 2,6‐Dimethylphenyl Isocyanide,Alkylidene Meldrum's Acids,and Arylhydroxylamines

Alkylidene Meldrum's acids and 2,6‐dimethylphenyl isocyanide react smoothly in the presence of arylhydroxylamines at room temperature to produce 2,5‐dioxo‐pyrrolidines in fairly high yield.     

Crystal structures and spectroscopic characterization of MBr2(CNXyl)n (M = Fe and Co,n = 4; M = Ni,n = 2; Xyl = 2,6‐dimethylphenyl), and of formally zero‐valent iron as a cocrystal of Fe(CNXyl)5 and Fe2(CNXyl)9

Structures and spectroscopic characterization of the divalent complexes cis‐dibromidotetrakis(2,6‐dimethylphenyl isocyanide)iron(II) dichloromethane 0.771‐solvate, [FeBr₂(C₉H₉N)₄]·0.771CH₂Cl₂ or cis‐FeBr₂(CNXyl)₄·0.771CH₂Cl₂ (Xyl = 2,6‐dimethylphenyl), trans‐dibromidotetrakis(2,6‐dimethylphenyl isocyanide)iron(II), [FeBr₂(C₉H₉N)₄] or trans‐FeBr₂(CNXyl)₄, trans‐dibromidotetrakis(2,6‐dimethylphenyl isocyanide)cobalt(II), [CoBr₂(C₉H₉N)₄] or trans‐CoBr₂(CNXyl)₄, and trans‐dibromidobis(2,6‐dimethylphenyl isocyanide)nickel(II), [NiBr₂(C₉H₉N)₂] or trans‐NiBr₂(CNXyl)₂, are presented. Additionally, crystals grown from a cold diethyl ether solution of zero‐valent Fe(CNXyl)₅ produced a structure containing a cocrystallization of mononuclear Fe(CNXyl)₅ and the previously unknown dinuclear [Fe(CNXyl)₃]₂(μ₂‐CNXyl)₃, namely pentakis(2,6‐dimethylphenyl isocyanide)iron(0) tris(μ₂‐2,6‐dimethylphenyl isocyanide)bis[tris(2,6‐dimethylphenyl isocyanide)iron(0)], [Fe(C₉H₉N)₅][Fe₂(C₉H₉N)₉]. The (M)C—N—C(Xyl) angles of the isocyanide ligand are nearly linear for the metals in the +2 oxidation state, for which the ligands function essentially as pure donors. The νCN stretching frequencies for these divalent metal isocyanides are at or above that of the free ligand. Relative to Fe^II, in the structure containing iron in the formally zero‐valent oxidation state, the Fe—C bond lengths have shortened, the C[triple‐bond]N bond lengths have elongated, the (M)C—N—C(Xyl) angles of the terminal CNXyl ligands are more bent, and the νCN stretching frequencies have shifted to lower energies, all indicative of substantial M(dπ)→π* backbonding.     

Synthesis of Functionalized 1‐Azadienes by Reaction of 2,6‐Dimethylphenyl Isocyanide and Acetylenic Esters in the Presence of CH Acids

The adducts produced in the reaction between 2,6‐dimethylphenyl isocyanide and acetylenic esters were trapped by 3‐chloroacetylacetone, dialkyl 2‐chloromalonates, or dimethoxy methoxymalonate to produce highly functionalized 1‐azadienes in good yields.     

Adducts of tin tetrahalides with monodentate Schiff bases

Complexes of tin tetrachloride and tetrabromide with N-(dimethylphenyl)benzalaldimines have been synthesized and characterized by electronic, infrared and Raman spectroscopy. The vibrational data have been interpreted in terms of trans-octahedral structure.     

Synthesis and Structural Characterization of Some New Magnesium Formamidinates

[Mg(Form)₂(THF)] [Form = bis(2,6‐dimethylphenyl)formamidinate (XylForm) ( 1 ), bis(2,6‐diethylphenyl)formamidinate, (EtForm) ( 2 ), bis(2,6‐diisopropylphenyl)formamidinate (DippForm) ( 3 )] are conveniently synthesized by treating bis(2,6‐dimethylphenyl)formamidine, bis(2,6‐diethylphenyl)formamidine, or bis(2,6‐diisopropylphenyl)formamidine, respectively, with half an equivalent of dibutylmagnesium in THF. Compounds 1 – 3 are mononuclear species in the solid state with five coordinate central metal atoms. The ¹H NMR chemical shift of the formamidinate formyl proton exhibits a correlation with ligand sterics wherein increasing bulk leads to a shift to higher field.     

Synthesis and X‐ray Crystal Structures of Zinc Complexes Supported by Chelating Ligands: Various Reactions of α‐Iminopyridines with ZnEt2

α‐Iminopyridine (α‐IP) is an important redox‐noninnocent ligand. The substituents on the imino function of α‐IPs have important impact on the reaction selectivity with diethylzinc. For the α‐IPs with a hydrogen substituent on the imino carbon, reduction occurred for the non‐bulky N‐substituents phenyl and 2‐methylphenyl groups, whereas alkyl addition and coupling reactions can be selectively achieved for the sterically bulky N‐substituents 2,6‐dimethylphenyl or 2,4,6‐trimethylphenyl group. However, for the α‐IPs with a CH₃ substituent on the imino carbon, the deprotonation reaction happened regardless of the N‐substituents of 2‐methylphenyl or 2,6‐dimethylphenyl group. All the products were isolated and characterized by single‐crystal X‐ray diffraction. The possible mechanisms of these reactions were also discussed.     

Addition of Isocyanides to Tetramesityldigermene: A Comparison of the Reactivity between Surface and Molecular Digermenes

The reaction of benzyl isocyanide, tert‐butyl isocyanide, and 2,6‐dimethylphenyl isocyanide with tetramesityldigermene (Mes₂Ge=GeMes₂) was examined. Whereas the addition of benzyl isocyanide gave the C?NC activation product, Mes₂Ge(CH₂Ph)Ge(CN)Mes₂, tert‐butyl isocyanide, and 2,6‐dimethylphenyl isocyanide did not give stable adducts, rather the rate of conversion of the digermene to the corresponding cyclotrigermane was accelerated. A comparison between the reactivity of the isocyanides with Mes₂Ge=GeMes₂ and the Ge(100)‐2×1 surface was made and some insights into the surface chemistry are offered.     

Säurekatalysierte Umlagerungen von 1,5-Dimethyl-6-methyliden-tricyclo[3.2.1.02,7]oct-3-en-8endo-olen

Acid Catalysed Rearrangement of 1,5-Dimethyl-6-methyliden-tricyclo[3.2.1.0^2,7]oct-3-en-8endo-ols The tricyclic alcohols 2,3,4 and 6 (Scheme 1) are synthesized by the reaction of the tricyclic ketone 1 with sodiumborohydrid or metalloorganic reagents. Their configuration at C(8) is determined by NMR. in the presence of Eu(fod)₃. The exo-attack of 1 by the nucleophil forming the endo-alcohol is favored, the π-electrons of C(3) = C(4) hindering the endo-attack. On treatment with sulfuric acid in dioxane/water at 25° the tertiary alcohols yield aryl-substituted ketones. 3 gives in 78.5% yield a mixture of the 3-(dimethylphenyl)-2-butanones 12 and 13 , in addition to 16.5% of (2,3,4-trimethylphenyl)-2-propanon ( 14 ) (Scheme 2). The alcohols 4 and 6 yield mixtures of the 2-(dimethylphenyl)-3-pentanones 19 and 20 (72%), and 2-(dimethylphenyl)-propiophenones 21 and 22 (68%), respectively (Scheme 2). In the case of the secondary alcohol 2 mainly products derived from hydration at the C(6), C(9) double bond are formed, namely the mixture of diols 23 and 24 (21%), and the mixture of the isomeric 2-(dimethylphenyl)propanals 25, 26 and 27 (3%) (Scheme 3). - The structures of 12–14, 19/20, 21/22, 23/24 and 25/26/27 were established by spectroscopic data. In the case of 12 and 13 the degradation of their mixture to the known 1-(dimethylphenyl)ethanols 17/18 confirmed the assignment. - The most probable mechanism for the rearrangement of 3 is shown in Schemes 4 and 5. The reaction proceeds from 3 through a, b and g to 12 and 13; 14 is formed via e, f and i . In the case of 4 and 6 only the reaction analogue to 3 → a → b → g ?12/13 takes place. The isomeric aldehyds 25–27 formed from 2 could have the structures s, t , and v . The former two could be generated in a similar way as 12/13 from 3 , the latter one as shown in Scheme 8.     

Evaluation and Comparison of a 3,5‐Dimethylphenyl Isocyanate Teicoplanin with Phenyl Isocyanate Teicoplanin Chiral Stationary Phase Using RP‐HPLC

HPLC enantiomeric separations of 8 α‐amino acids were achieved using two self‐made chiral stationary phases (CSP)–phenyl isocyanate teicoplanin (Phe‐TE) and 3,5‐dimethylphenyl isocyanate teicoplanin (DMP‐TE), using reversed phase mobile phases. The Phe‐TE or the DMP‐TE CSP was prepared from the TE using derivative agents, phenyl isocyanate or 3,5‐dimethylphenyl isocyanate, respectively. The chromatographic results were given as the retention, selectivity, resolution factor and the enantioselective free energy difference corresponding to the separation of the two enantiomers. The effect of pH, organic modifier type and amount were discussed, and the stereoselectivities for two TE‐based CSPs were compared. The chiral selectivity factor for six α‐amino acids on DMP‐TE is somewhat bigger than that on Phe‐TE CSP under reversed phase (RP) mode. Comparison of the enantiomeric separations using self‐made Phe‐TE and DMP‐TE was conducted to gain a better understanding of the chiral recognition mechanism of the macrocyclic glycopeptide CSP.     

Antimicrobial Depsides Produced by Cladosporium uredinicola,an Endophytic Fungus Isolated from Psidium guajava Fruits

Four depsides, all of them new as natural products, were isolated from Cladosporium uredinicola solid‐media culture and identified as 3‐hydroxy‐2,5‐dimethylphenyl 2,4‐dihydroxy‐3,6‐dimethylbenzoate ( 1 ), 3‐hydroxy‐2,4,5‐trimethylphenyl 2,4‐dihydroxy‐3,6‐dimethylbenzoate ( 2 ), 3‐hydroxy‐2,5‐dimethylphenyl 3‐[(2,4‐dihydroxy‐3,6‐dimethylbenzoyl)oxy]‐6‐hydroxy‐2,4‐dimethylbenzoate ( 3 ), and 3‐hydroxy‐2,4,5‐trimethylphenyl 3‐[(2,4‐dihydroxy‐3,6‐dimethylbenzoyl)oxy]‐6‐hydroxy‐2,4‐dimethylbenzoate ( 4 ). The endophytic fungus was isolated from Psidium guajava fruits and cultivated over sterilized rice. The compounds 1 – 4 were purified by classical chromatographic procedures, and the chemical structures were identified by spectroscopic studies, mainly 1D‐ and 2D‐NMR and LC/ESI‐MS/MS. Three of the isolated depsides exhibited moderate bacteriostatic and/or bactericide effects on Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, and Bacillus subtillis.     

A green synthesis of chemiluminescent N-sulfopropyl acridinium esters in ionic liquids without using the carcinogen 1,3-propane sultone

Chemiluminescent acridinium dimethylphenyl esters containing hydrophilic N-sulfopropyl groups in the acridinium ring are used as labels in automated immunoassays for clinical diagnostics. Introduction of the N-sulfopropyl group in these labels is normally accomplished by N-alkylation of the corresponding, nonchemiluminescent acridine ester precursors with the toxic carcinogen 1,3-propane sultone. In the current study, we report that sodium 3-bromopropane sulfonate in ionic liquids (ILs) is a benign alternative to 1,3-propane sultone for introducing the N-sulfopropyl group in chemiluminescent acridinium ester labels. The sultone reagent can be eliminated in the synthesis of N-sulfopropyl acridinium dimethylphenyl ester labels by taking advantage of the increased reactivity of acridan esters toward nontoxic sodium 3-bromopropane sulfonate in [BMIM][BF₄]. Sodium 3-bromopropane sulfonate in ILs is also potentially a nontoxic alternative to 1,3-propane sultone for introducing the water-soluble, three-carbon sulfobetaine moiety in other molecules as well.     

Kinetics of radical polymerization of dimethylphenyl methacrylates

The kinetics of free radical polymerization of all six existing isomeric dimethylphenyl methacrylates were studied in bulk at 60°C, initiated by dilauroyl peroxide, using dilatometry. The different polymerization rates observed, resulting from the different monomer structures, are discussed in terms of steric and other effects, considering also the previous results for tolyl methacrylates. © 1993 John Wiley & Sons, Inc.     

Polymer Light-emitting Diodes Based on End-capped Poly[9,9-di-(2'-ethylhexyl)fluorenyl-2,7-diyl]

We demonstrate polymer light‐emitting diodes (LEDs) based on poly[9,9‐di‐(2′‐ethylhexyl)fluorenyl‐2,7‐diyl] with end capper dimethylphenyl or N,N‐bis(4‐methylphenyl)‐N‐phenylamine. The introduction of end‐capper groups increased the device luminance and efficiency, while greatly depressing the green emission. For the devices constructed of poly[9,9‐di‐(2′‐ethylhexyl)fluorenyl‐2,7‐diyl] end capped with dimethylphenyl, the maximum luminance reached 381 cd/m² at 122 mA/cm². The maximum external quantum efficiency was 0.16% at 117 mA/cm², which is more than five times higher than that of the non‐end‐capped polymer LEDs. The electroluminescence (EL) maximum was at 485 nm, blue shifted by 52 nm with respect to that of the non‐end‐capped polyfluorene devices. It is proposed that efficient hole trapping at end capper and increased resistance of polyfluorene to oxidation are responsible for the improved device performance and color stability.     

Twenty-five Years of "Crowning" Around: Synthesis of Crown Ethers at Brigham Young University

A review of the synthesis of crown ethers at Brigham Young University ispresented. Topics include: thiacrown ethers, diestercrown ethers,proton-ionizable crown ethers, chiral crown ethers, azacrown ethers,cryptands and other polycyclic ligands, and the Mannich reaction method toprepare azacrown ethers and cryptands.     

Chemiluminescence from alkoxy-substituted acridinium dimethylphenyl ester labels

Chemiluminescent acridinium dimethylphenyl ester labels are used in automated immunoassays for clinical diagnostics. Light emission from these labels is triggered by alkaline peroxide in the presence of the cationic surfactant cetyltrimethylammonium chloride (CTAC). The surfactant plays a critical role in the chemiluminescence process of these labels by both accelerating their emission kinetics and increasing total light output enabling high throughout and improved assay sensitivity in automated immunoassays. Despite the surfactant's crucial role in the chemiluminescent reaction, no study has investigated how structural perturbations in the acridinium ring could impact the influence of the surfactant. We describe herein the synthesis and properties of three new alkoxy-substituted, acridinium dimethylphenyl esters where the nature of the alkoxy group in the acridinium ring was varied (hydrophobic or hydrophilic). Chemiluminescence measurements of these alkoxy-substituted labels indicate that hydrophilic functional groups in the acridinium ring, in particular sulfobetaine zwitterions, disrupt surfactant-mediated compression of emission times but not enhancement of light yield. These results support the hypothesis that surfactant-mediated effects require the binding of two different reaction intermediates to surfactant aggregates and, that surfactants influence light emission from acridinium esters by two separate mechanisms. Our studies also indicate that preservation of both surfactant effects on acridinium ester chemiluminescence and low non-specific binding of the label can be achieved with a relatively hydrophobic acridinium ring coupled to a hydrophilic phenolic ester leaving group.     

Effect of surfactants on the chemiluminescence of acridinium dimethylphenyl ester labels and their conjugates

Chemiluminescent acridinium dimethylphenyl esters, containing two methyl groups flanking the phenolic ester bond, display excellent chemiluminescence stability and are used as labels in automated immunoassays for clinical diagnostics. Light emission from these labels is triggered with alkaline peroxide in the presence of the cationic surfactant cetyltrimethylammonium chloride. Under these conditions, light emission is rapid and is complete in <5 s. In the present study we examined the effect of various surfactants on light emission from acridinium dimethylphenyl ester labels and their conjugates containing hydrophilic linkers derived either from hexa(ethylene)glycol or a sulfobetaine zwitterion. Sulfobetaine zwitterions are very polar and incorporation of these functional groups in acridinium dimethyphenyl esters and their conjugates represents a new approach to improving the aqueous solubility of these chemiluminescent labels. Our results indicate that in general, surfactants affect light emission from these labels and their conjugates by two discrete mechanisms. Cationic surfactants, but not anionic or non-ionic surfactants, accelerate overall light emission kinetics and a more modest effect is observed with zwitterionic surfactants. Surfactants also enhance total light output and the magnitude of this enhancement is maximal for cationic surfactants and a sulfobetaine zwitterionic surfactant. These observations are the first to clearly delineate the role of the surfactant on the chemiluminescence reaction pathway of acridinium esters and can be rationalized based on known effects of surfactant aggregates on bimolecular and unimolecular reactions.     

Construction of a Hemifullerene Skeleton: A Regioselective Intramolecular Oxidative Cyclization

A two‐step synthesis of a strained π bowl, with hemifullerene skeleton from sumanene, was achieved in a high yield. The first step is a base‐promoted condensation reaction with a benzophenone compound, bis(3,5‐dimethylphenyl)methanone. The second step is the regioselective intramolecular oxidative cyclization, which is a key reaction for the hemifullerene skeleton synthesis. This regioselective cyclization is likely to be under thermodynamic control. This strategy will allow facile synthesis of various highly strained π bowls.